chore: update build scripts

Some variables had size mismatches with the data size defined in the frame segment. After deframing, this could leave residual bits as random and unknown values.

Makefile

@@ -7,7 +7,6 @@ ifeq ($(TARGET_PROJ), node)
 BUILD_DIR := $(PROJECT)/build/node
 CONFIG_FILE := $(PROJECT)/config/node.json
 else ifeq ($(TARGET_PROJ), ge)
-XILINX_VITIS_CLASSIC := y
 BUILD_DIR := $(PROJECT)/build/ge
 CONFIG_FILE := $(PROJECT)/config/ge.json
 else

build.bat

@@ -5,7 +5,7 @@ set "tools_dir=%~dp0scripts\platform\%platform%"
 :menu
 echo Please select the project needed to be built:
 echo 1. NODE Project (SDK 2019.1)
-echo 2. GE Project (Vitis 2024.1)
+echo 2. GE Project (SDK 2019.1)
 set /p choice="Choose a project (1 or 2): "
 
 if "%choice%"=="1" (
@@ -15,8 +15,8 @@ if "%choice%"=="1" (
     set "config=%~dp0config\node.json"
     goto end
 ) else if "%choice%"=="2" (
-    echo Building GE Project ^(Vitis 2024.1^)
-    set "platform_ver=2024.1"
+    echo Building GE Project ^(SDK 2019.1^)
+    set "platform_ver=2019.1"
     set "work_dir=%~dp0build\ge"
     set "config=%~dp0config\ge.json"
     goto end

src/ge_app.c

@@ -84,6 +84,7 @@ struct callback_desc scutm_callback_desc =
 	.ctx = NULL
 };
 
+#ifdef _GE_APP_
 L2_CONFIG linkConfig = {
 	.myType = L2_NODE_HEAD,
 	.clustId = 1U,
@@ -95,18 +96,9 @@ L2_CONFIG linkConfig = {
 	.pushUpHandle = LinklayerPush2Up,
 	.popUpHandle = LinklayerPopFromUp
 };
-
-// L2_CONFIG linkConfig = {
-// 	.myType = L2_NODE_MEMBER,
-// 	.clustId = 1U,
-// 	.myId = 2U,
-// 	.headId = 1U,
-// 	.netScale = 2U,
-// 	.phyInstPtr = NULL, // physical layer reference
-// 	.tmcInstPtr = NULL,
-//	.pushUpHandle = LinklayerPush2Up,
-//	.popUpHandle = LinklayerPopFromUp
-// };
+#else
+#error No application type is specified.
+#endif
 
 static PHY_CONFIG phyConfig =
 {
@@ -136,46 +128,6 @@ static MPC_CONFIG mpcConfig = {
 	.rxQueueMax = 16
 };
 
-#ifdef APP_EMULATE_DATA
-uint8_t testDataLj[] =
-{
-	0xEA, 0xDF, 0x3F, 0x27, 0xCE, 0x9B, 0xE6, 0x3F,
-	0xB5, 0xA3, 0x38, 0x47, 0x1D, 0x1D, 0xFA, 0x3F,
-	0x39, 0xB4, 0xC8, 0x76, 0xBE, 0xAB, 0x8E, 0x40,
-	0xC9, 0xE8, 0x80, 0x24, 0xEC, 0xCB, 0x13, 0x40,
-	0x37, 0x38, 0x7F, 0x22, 0x72, 0x06, 0xF0, 0x01,
-	0x00, 0x00, 0xB8, 0xAA, 0x08, 0x47, 0x1E, 0xC6,
-	0xB0, 0x47, 0x54, 0xFD, 0xEB, 0x45, 0xA1, 0x8A,
-	0x86, 0x44, 0x43, 0xB6, 0xC8, 0x44, 0x4E, 0x19,
-	0xA8, 0x42
-};
-
-uint8_t testDataFlj[] =
-{
-	0xFD, 0x1E, 0xA5, 0x22, 0x72, 0x02, 0x5A, 0x02,
-	0x00, 0x00, 0x81, 0x97, 0x39, 0x3F, 0xF1, 0xF4,
-	0xC0, 0x3F, 0x27, 0xF1, 0x65, 0x44, 0x53, 0x5C,
-	0xD3, 0x3F, 0xB5, 0x24, 0xA6, 0x22, 0x72, 0x02,
-	0x83, 0x01, 0x00, 0x00, 0xFC, 0xE0, 0x44, 0x47,
-	0xB7, 0x83, 0x35, 0x47, 0xA4, 0xBF, 0xE5, 0xC4,
-	0xE8, 0xDC, 0xD1, 0x44, 0x5D, 0x5D, 0xE7, 0x44,
-	0x7D, 0x1B, 0xE8, 0xC1, 0x60, 0x97, 0x57, 0x42,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x5D, 0x86, 0xA6, 0x22, 0x72, 0x02, 0xA5, 0x02,
-	0x00, 0x00, 0x97, 0x4E, 0xB5, 0x47, 0xC4, 0x2A,
-	0xB0, 0x47, 0x2D, 0x00, 0x21, 0xC5, 0x8A, 0x85,
-	0xD1, 0x44, 0x23, 0xFD, 0xC8, 0x44, 0xA1, 0xC4,
-	0xEA, 0xC1, 0x91, 0x4E, 0x71, 0xC2, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6D, 0xAD,
-	0xA6, 0x22, 0x72, 0x02, 0xA5, 0x02, 0x00, 0x00,
-	0xCD, 0x07, 0xD6, 0x47, 0x1D, 0xA4, 0xCE, 0x47,
-	0x6E, 0x61, 0x33, 0xC5, 0x85, 0x55, 0xD1, 0x44,
-	0x9C, 0x16, 0xBD, 0x44, 0x36, 0xC0, 0xEB, 0xC1,
-	0xF0, 0xFF, 0x5B, 0x42, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x78, 0x25, 0x03, 0x00
-};
-#endif
-
 /************************** Function Prototypes ******************************/
 static struct irq_ctrl_desc *intcDescPtr; // General interrupt controller descriptor
 static struct timer_desc *logTmPtr;
@@ -324,7 +276,7 @@ static int32_t SetupInterruptSystem(struct irq_ctrl_desc *descPtr)
 	irq_enable(descPtr, PERIODIC_5MS_INTR_ID);
 	irq_enable(descPtr, MPC_RX_INTR_ID);
 	irq_enable(descPtr, MPC_TX_INTR_ID);
-//	irq_enable(descPtr, SCUTIMER_INTR_ID);
+	irq_enable(descPtr, SCUTIMER_INTR_ID);
 
 	// Enable Exceptions
 	Status = irq_global_enable(descPtr);
@@ -438,16 +390,6 @@ static void ScuTimer_IntrHandler(void *context)
 			{
 				DBG_ERROR("Failed to apply remote test.\n");
 			}
-#ifdef APP_EMULATE_DATA
-			if (L2_GetNodeType(linkInstPtr) == L2_NODE_HEAD)
-			{
-				SysMonitor_UpdateSendPayload(testDataFlj, PAYLOAD_LEN_FLJ_TX);
-			}
-			else
-			{
-				SysMonitor_UpdateSendPayload(testDataLj, PAYLOAD_LEN_LJ_TX);
-			}
-#endif
 		}
 
 		XScuTimer_ClearInterruptStatus((XScuTimer *)xdesc->instance);
@@ -596,15 +538,5 @@ int main(void)
 			DBG_ERROR("Mpc_HandleCmd exit with ErrorCode: %" PRId32 ".\n", Status);
 		}
 	}
-	if (Mpc_IsSvcDownPending(mpcDescPtr))
-	{
-		RING_BUFFER *msg = NULL;
-		Mpc_PopSvcFrame(mpcDescPtr, (void**)&msg);
-		Mpc_PushSvcFrame(mpcDescPtr, (void*)msg);
-		if (Status != SUCCESS)
-		{
-			DBG_ERROR("Mpc_HandleCmd exit with ErrorCode: %" PRId32 ".\n", Status);
-		}
-	}
 	}
 } // main

src/ge_config/app_config.h

@@ -29,6 +29,8 @@
 #define _APP_VER_MINOR	((_APP_VER & 0x00FF0000) >> 16)
 #define _APP_VER_PATCH	(_APP_VER & 0x0000FFFF)
 
+#define _GE_APP_
+
 /*********** Debug Info Level ************/
 //  #define _DEBUG_LEVEL 1
 // 3 - print all debug info
@@ -36,12 +38,6 @@
 // 1 - print only errors
 // other - print nothing
 
-#define APP_EMULATE_DATA
-#define DATALINK_ENABLE_AUTORECONNECT
-#define DATALINK_ENABLE_AUTOTIMESYNC
-//#define DATALINK_ENABLE_BERTEST
-
-
 /************ Hardware Configs ************/
 #define CPU_CLK_HZ 			XPAR_CPU_CORTEXA9_0_CPU_CLK_FREQ_HZ
 #define GLOBAL_TIMER_CLK_HZ (CPU_CLK_HZ/2)
@@ -86,16 +82,4 @@
 // INTC configis
 #define INTC_DEVICE_ID XPAR_SCUGIC_0_DEVICE_ID
 
-// Configuration Check
-#if defined(PHY_BEAM_SET_PRESET) && !defined(PHY_BEAM_FORMING_ENABLE)
-#define PHY_BEAM_FORMING_ENABLE
-#warning To impliment beam scan must enable beam forming...
-#endif
-
-#if defined(DATALINK_ENABLE_BERTEST)
-#if !defined(DATALINK_ENABLE_AUTOTIMESYNC)
-	#warning To enbale bit error rate test, auto time-sync should be enabled...
-#endif
-#endif
-
 #endif

src/hardware/headless.c

@@ -56,10 +56,10 @@ int HARDWARE_initialize()
 	int Status;
 
 	// use configuration
-	mykDevice.rx->rxPllLoFrequency_Hz = 2500000000u;
-	mykDevice.tx->txPllLoFrequency_Hz = 2500000000u;
-	mykDevice.tx->tx1Atten_mdB = 20000;
-	mykDevice.tx->tx2Atten_mdB = 20000;
+	mykDevice.rx->rxPllLoFrequency_Hz = 720000000u;
+	mykDevice.tx->txPllLoFrequency_Hz = 720000000u;
+	mykDevice.tx->tx1Atten_mdB = 10000;
+	mykDevice.tx->tx2Atten_mdB = 10000;
 
 	Status = HARDWARE_ad9371Config();
 

src/mpc/mpc.c

@@ -255,7 +255,8 @@ static int32_t Mpc_SystemConfig(MPC *instPtr, uint8_t *msg)
 				WD_SPEED_CMD, msg[WD_SPEED_CMD]);
 		return EIGNORE;
 	}
-
+	//NOTE: Clear previous log.
+	memset(&(linkInstPtr->log), 0x00, sizeof(L2_LOG));
 	if (msg[WD_EN_CMD] == EN_CMD_ON_HIGH_POWER)
 	{
 		// high power config

src/networking/link_layer/link_layer.c

@@ -821,15 +821,15 @@ int32_t Linklayer_EventHandler(L2_INST *instPtr, const L2_EVENT *l2Event)
 			UpdateMainSate(instPtr, L2_NORMAL_STATE);
 			switch(L2_GetCurrentSpeedMode(instPtr)){
 			case L2_SPEED_NONE :
-				DBG_WARNING("Speed mode not configured, fallback to 2Kbps mode.\n");
-			case L2_SPEED_2KBPS :
-				instPtr->rtneConfig.rtneTable = normalTable2K;
-				instPtr->rtneConfig.rtnePrd = ARRAY_SIZE(normalTable2K);
-				break;
+				DBG_WARNING("Speed mode not configured, fallback to 128Kbps mode.\n");
 			case L2_SPEED_128KBPS :
 				instPtr->rtneConfig.rtneTable = normalTable128K;
 				instPtr->rtneConfig.rtnePrd = ARRAY_SIZE(normalTable128K);
 				break;
+			case L2_SPEED_2KBPS :
+				instPtr->rtneConfig.rtneTable = normalTable2K;
+				instPtr->rtneConfig.rtnePrd = ARRAY_SIZE(normalTable2K);
+				break;
 			case L2_SPEED_256KBPS :
 				instPtr->rtneConfig.rtneTable = normalTable256K;
 				instPtr->rtneConfig.rtnePrd = ARRAY_SIZE(normalTable256K);

src/networking/link_layer/msg_def.h

@@ -27,7 +27,7 @@
 
 #include "link_layer.h"
 
-#define L2_PACK_LEN_MAX 512 // bytes
+#define L2_PACK_LEN_MAX 1024 // bytes
 
 #define L2_ADV_PACK_LEN 28  // bytes
 #define L2_CMF_PACK_LEN 268 // bytes

src/networking/link_layer/scan.c

@@ -478,7 +478,7 @@ int32_t L2_Scan_PktHandler(L2_INST *instPtr, uint8_t *msg)
 		float nodePos;
 		L2_DEASSEMBLE(msg, L2_MSG_ADV_SRC_POSX, &nodePos);
 		node->nodeInfo.pos.x = (double)nodePos;
-		L2_DEASSEMBLE(msg, L2_MSG_ADV_SRC_POSY,  &nodePos);
+		L2_DEASSEMBLE(msg, L2_MSG_ADV_SRC_POSY, &nodePos);
 		node->nodeInfo.pos.y = (double)nodePos;
 		L2_DEASSEMBLE(msg, L2_MSG_ADV_SRC_POSZ, &nodePos);
 		node->nodeInfo.pos.z = (double)nodePos;
@@ -487,7 +487,7 @@ int32_t L2_Scan_PktHandler(L2_INST *instPtr, uint8_t *msg)
 		// Reset node ttl
 		node->ttlCnt = 0;
 
-		uint32_t netstartTime;
+		uint32_t netstartTime = 0;
 		// Update net start time.
 		L2_DEASSEMBLE(msg, L2_MSG_ADV_SRC_NETSTART_TIME, &netstartTime);
 		L2_EVENT netSetupDoneEvent = {
@@ -496,10 +496,12 @@ int32_t L2_Scan_PktHandler(L2_INST *instPtr, uint8_t *msg)
 		AssertL2Event(instPtr, &netSetupDoneEvent);
 
 		// Calculate time deviation
-		uint32_t frameNum, slotNum = 0;
+		uint32_t frameNum = 0;
+		uint32_t slotNum = 0;
+		int64_t timeDev = 0;
 		L2_DEASSEMBLE(msg, L2_MSG_FRAME_NUM, &frameNum);
 		L2_DEASSEMBLE(msg, L2_MSG_SLOT_NUM, &slotNum);
-		Status = L2_GetTimeDeviation(instPtr, frameNum, slotNum, true, &(instPtr->log.timeDev));
+		Status = L2_GetTimeDeviation(instPtr, frameNum, slotNum, true, &timeDev);
 		if (Status != SUCCESS)
 		{
 			DBG_ERROR("Failed to compute time deviation.\n")
@@ -507,7 +509,8 @@ int32_t L2_Scan_PktHandler(L2_INST *instPtr, uint8_t *msg)
 		}
 
 		// Time sync.
-		L2_TimeAdjust(instPtr, &(instPtr->log.timeDev));
+		L2_TimeAdjust(instPtr, &timeDev);
+		instPtr->log.timeDev = timeDev;
 
 		// trigger flag
 		AdvRecvStateUpdate(scanFsmPtr, true);
@@ -550,15 +553,18 @@ int32_t L2_Scan_PktHandler(L2_INST *instPtr, uint8_t *msg)
 		node->ttlCnt = 0;
 
 		// Calculate time deviation
-		uint32_t frameNum, slotNum = 0;
+		uint32_t frameNum = 0;
+		uint32_t slotNum = 0;
+		int64_t timeDev = 0;
 		L2_DEASSEMBLE(msg, L2_MSG_FRAME_NUM, &frameNum);
 		L2_DEASSEMBLE(msg, L2_MSG_SLOT_NUM, &slotNum);
-		Status = L2_GetTimeDeviation(instPtr, frameNum, slotNum, true, &(instPtr->log.timeDev));
+		Status = L2_GetTimeDeviation(instPtr, frameNum, slotNum, true, &timeDev);
 		if (Status != SUCCESS)
 		{
 			DBG_ERROR("Failed to compute time deviation.\n")
 			break;
 		}
+		instPtr->log.timeDev = timeDev;
 
 		if (L2_GetNodeType(instPtr) != L2_NODE_HEAD)
 		{

src/networking/link_layer/service.c

@@ -146,7 +146,7 @@ static int32_t Service_Packing(L2_INST *instPtr, L2_FRAME_TYPE type, uint8_t dst
 			DBG_ERROR("Fail to append CRC, error code: %" PRId32 ".\n", Status);
 			ASSERT(true);
 		}
-		return EIGNORE;
+		return SUCCESS;
 	}
 	RING_BUFFER *svcData = instPtr->serviceFSM->currTxBuff;
 

src/node_app.c

@@ -66,10 +66,11 @@ struct callback_desc scutm_callback_desc = {
 	.ctx = NULL
 };
 
+#ifdef _NODE_APP_
 L2_CONFIG linkConfig = {
-	.myType = L2_NODE_HEAD,
+	.myType = L2_NODE_MEMBER,
 	.clustId = 1U,
-	.myId = 1U,
+	.myId = 2U,
 	.headId = 1U,
 	.netScale = 2U,
 	.phyInstPtr = NULL, // physical layer reference
@@ -77,18 +78,9 @@ L2_CONFIG linkConfig = {
 	.pushUpHandle = LinklayerPush2Up,
 	.popUpHandle = LinklayerPopFromUp
 };
-
-// L2_CONFIG linkConfig = {
-// 	.myType = L2_NODE_MEMBER,
-// 	.clustId = 1U,
-// 	.myId = 2U,
-// 	.headId = 1U,
-// 	.netScale = 2U,
-// 	.phyInstPtr = NULL, // physical layer reference
-// 	.tmcInstPtr = NULL,
-//	.pushUpHandle = LinklayerPush2Up,
-//	.popUpHandle = LinklayerPopFromUp
-// };
+#else
+#error No application type is specified.
+#endif
 
 static PHY_CONFIG phyConfig = {
 	.devId = PHY_DEVICE_ID,
@@ -232,7 +224,7 @@ static int32_t SetupInterruptSystem(struct irq_ctrl_desc *descPtr)
 	irq_enable(descPtr, PHY_INTR_ID);
 	irq_enable(descPtr, PERIODIC_5MS_INTR_ID);
 	irq_enable(descPtr, SYSBUS_INTR_ID);
-	irq_enable(descPtr, SCUTIMER_INTR_ID);
+//	irq_enable(descPtr, SCUTIMER_INTR_ID);
 
 	// Enable Exceptions
 	Status = irq_global_enable(descPtr);
@@ -428,9 +420,7 @@ int main(void)
 
 	DBG_PRINT("Physical started...\n");
 	Phy_Start(phyInstPtr);
-
-
-	// Linklayer_Start(linkInstPtr);
+	Linklayer_Start(linkInstPtr);
 
 	while (true)
 	{

src/node_config/app_config.h

@@ -29,6 +29,8 @@
 #define _APP_VER_MINOR ((_APP_VER & 0x00FF0000) >> 16)
 #define _APP_VER_PATCH (_APP_VER & 0x0000FFFF)
 
+#define _NODE_APP_
+
 /*********** Debug Info Level ************/
 //  #define _DEBUG_LEVEL 1
 // 3 - print all debug info