add missing remote test

df_datalink_sp/src/networking/link_layer/link_layer.c

@@ -1237,6 +1237,7 @@ int32_t Linklayer_Proc(L2_INST *instPtr)
 	// TODO:
 	// instPtr->linkLog.recxnCnt =
 	// instPtr->linkLog.beamNo =
+	// instPtr->linkLog.beamWidth =
 	// instPtr->linkLog.beamAz =
 	// instPtr->linkLog.beamEl =
 	instPtr->linkLog.advTxCnt = (uint16_t)instPtr->log.advTxCnt;

df_datalink_sp/src/system_monitor.h

@@ -83,6 +83,7 @@ typedef struct __attribute__((packed))
 	uint8_t linkStage;
 	uint32_t recxnCnt;
 	uint8_t beamNo;
+	uint8_t beamWidth;
 	uint16_t beamAz;
 	uint16_t beamEl;
 	uint16_t advTxCnt;
@@ -111,8 +112,8 @@ typedef struct __attribute__((packed))
 	uint64_t acqMean;
 	uint8_t acqPhase;
 	uint8_t acqFreqCh;
-	uint8_t fsyncPeak;
+	uint64_t fsyncPeak;
-	uint8_t fsyncMean;
+	uint64_t fsyncMean;
 	uint8_t fsyncFreqCh;
 	uint16_t deintlvAmpEst;
 	uint16_t reserve;

df_datalink_sp/src/systembus/systembus.c

@@ -158,6 +158,15 @@
 #define WD_FLJ_RM_TEST 0x02
 #define FLJ_RM_TEST_CODE 0x99
 // -- Response
+#define WD_FLJ_TIME_STAMP 0x02
+#define WD_FLJ_TIME_STAMP_LEN 8
+#define WD_FLJ_LINK_LOG 0x0A
+#define WD_FLJ_LINK_LOG_LEN 64
+#define WD_FLJ_PHY_LOG 0x4A
+#define WD_FLJ_PHY_LOG_LEN 71
+#define WD_FLJ_HARDWARE_ST 0x91
+#define WD_FLJ_HARDWARE_ST_LEN 13
+
 #define FLJ_RM_TEST_RESP_LEN 158
 
 // Remote Test LJ
@@ -171,7 +180,7 @@
 #define WD_LJ_LINK_LOG 0x0A
 #define WD_LJ_LINK_LOG_LEN 64
 #define WD_LJ_PHY_LOG 0x4A
-#define WD_LJ_PHY_LOG_LEN 81
+#define WD_LJ_PHY_LOG_LEN 71
 #define WD_LJ_HARDWARE_ST 0x91
 #define WD_LJ_HARDWARE_ST_LEN 13
 
@@ -320,7 +329,7 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 			sysbusRsp->data[WD_ST_RET] = (hwStatsPtr->isSpOk && hwStatsPtr->isAntOk) ? ST_RET_OK : ST_RET_ERROR;
 		}
 		// apply status and omit 2 bytes of overhead.
-		memcpy(sysbusRsp->data + WD_SP_PS_VOLT, &(hwStatsPtr->spPlAuxVolt), ST_RET_INFO_LEN);
+		memcpy(sysbusRsp->data + WD_SP_PS_VOLT, &(hwStatsPtr->spPsVolt), ST_RET_INFO_LEN);
 
 		if (CircQueuePush(instPtr->txQueue, (void *)sysbusRsp) == false)
 		{
@@ -557,11 +566,11 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 		uint64_t time;
 		TimeCtrl_GetCurrentTime(linkInstPtr->config.tmcInstPtr, &tmWord);
 		time = tmWord.int_part * TIME_FRAC_MAX + tmWord.frac_part;
-		memcpy(sysbusRsp->data + WD_LJ_TIME_STAMP, &time, WD_LJ_TIME_STAMP_LEN);
+		memcpy(sysbusRsp->data + WD_FLJ_TIME_STAMP, &time, WD_FLJ_TIME_STAMP_LEN);
 		SysMonitor_GetSyslog(sysLogPtr);
-		memcpy(sysbusRsp->data + WD_LJ_LINK_LOG, &(sysLogPtr->linkLog), WD_LJ_LINK_LOG_LEN);
+		memcpy(sysbusRsp->data + WD_FLJ_LINK_LOG, &(sysLogPtr->linkLog), WD_FLJ_LINK_LOG_LEN);
-		memcpy(sysbusRsp->data + WD_LJ_PHY_LOG, &(sysLogPtr->phyLog), WD_LJ_PHY_LOG_LEN);
+		memcpy(sysbusRsp->data + WD_FLJ_PHY_LOG, &(sysLogPtr->phyLog), WD_FLJ_PHY_LOG_LEN);
-		memcpy(sysbusRsp->data + WD_LJ_HARDWARE_ST, &(sysLogPtr->hwState.spPsVolt), WD_LJ_HARDWARE_ST_LEN);
+		memcpy(sysbusRsp->data + WD_FLJ_HARDWARE_ST, &(sysLogPtr->hwState.spPsVolt), WD_FLJ_HARDWARE_ST_LEN);
 
 		if (CircQueuePush(instPtr->txQueue, (void *)sysbusRsp) == false){
 			free(sysbusRsp);
@@ -574,6 +583,7 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 	}
 	case CMD_LJ_RM_TEST:
 	{
+		SYSLOG *sysLogPtr = &(instPtr->sysLog);
 		if (data[WD_LJ_RM_TEST] != LJ_RM_TEST_CODE)
 		{
 			DBG_WARNING("SystemBus::Invalid remote test code!\n");
@@ -592,6 +602,16 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 		sysbusRsp->data[WD_CMD] = CMD_LJ_RM_TEST;
 		sysbusRsp->data[WD_PRD] = MY_PRD_ID;
 
+		TIME_WORD tmWord;
+		uint64_t time;
+		TimeCtrl_GetCurrentTime(linkInstPtr->config.tmcInstPtr, &tmWord);
+		time = tmWord.int_part * TIME_FRAC_MAX + tmWord.frac_part;
+		memcpy(sysbusRsp->data + WD_LJ_TIME_STAMP, &time, WD_LJ_TIME_STAMP_LEN);
+		SysMonitor_GetSyslog(sysLogPtr);
+		memcpy(sysbusRsp->data + WD_LJ_LINK_LOG, &(sysLogPtr->linkLog), WD_LJ_LINK_LOG_LEN);
+		memcpy(sysbusRsp->data + WD_LJ_PHY_LOG, &(sysLogPtr->phyLog), WD_LJ_PHY_LOG_LEN);
+		memcpy(sysbusRsp->data + WD_LJ_HARDWARE_ST, &(sysLogPtr->hwState.spPsVolt), WD_LJ_HARDWARE_ST_LEN);
+
 		if (CircQueuePush(instPtr->txQueue, (void *)sysbusRsp) == false){
 			free(sysbusRsp);
 			DBG_WARNING("SystemBus::TX Queue overflowed!\n");