feat: 完成地检工程的修改, mpc暂不可用

fix: 遗漏了部分注释
feat: 修改通过SDK编译
2025-05-23 14:48:13 +08:00 · 2025-05-23 08:35:40 +08:00 · 2025-05-22 22:14:10 +08:00 · 2025-05-21 17:12:04 +08:00 · 2025-05-21 17:11:38 +08:00 · 2025-05-21 10:23:38 +08:00
201 changed files with 43953 additions and 47764 deletions
@@ -0,0 +1,441 @@
+declare -A calMap
+calMap[JG01]="\{\n\
+	\{     0,    406, -10530,  -8223\}, \{     0,    697,  -9933,  -7988\},\n\
+	\{     0,    296, -10497,  -8272\}, \{     0,    515, -10264,  -8093\},\n\
+	\{     0,    689, -10212,  -8064\}, \{     0,     40, -10960,  -8572\},\n\
+	\{     0,    722, -10878,  -8518\}, \{     0,     59, -10987,  -8962\},\n\
+	\{     0,     56, -11264,  -8770\}, \{     0,   -464, -11341,  -9159\},\n\
+	\{     0,     19, -10924,  -8887\}, \{     0,   -669, -10927,  -8679\},\n\
+	\{     0,   -701, -11154,  -8712\}, \{     0,   -255, -10739,  -8009\},\n\
+	\{     0,   -192, -10509,  -8242\}, \{     0,  -1057, -11183,  -9007\},\n\
+	\{     0,    -57, -10606,  -8350\}, \{     0,   -719, -10949,  -8880\},\n\
+	\{     0,   -760, -11084,  -8660\}, \{     0,   -457, -10735,  -8833\},\n\
+	\{     0,   -188, -10623,  -9119\}, \{     0,   -628, -12609, -10119\},\n\
+	\{     0,   -434, -12714, -10225\}, \{     0,   -727, -13074, -10685\},\n\
+	\{     0,    -12, -12408, -10190\}, \{     0,     33, -12790, -10624\},\n\
+	\{     0,     93, -13235, -10819\}, \{     0,   -363, -13301, -11183\},\n\
+	\{     0,   -514, -13955, -11557\}, \{     0,   -458, -13878, -11722\},\n\
+	\{     0,     93, -13086, -11726\}, \{     0,   -663, -13597, -11868\},\n\
+	\{     0,    174, -12814, -11295\}, \{     0,    121, -12278, -11150\},\n\
+	\{     0,    425, -11255, -10363\}, \{     0,    430, -11645, -10189\},\n\
+	\{     0,    277, -11844,  -9499\}, \{     0,   -132, -12241,  -9420\},\n\
+	\{     0,    448, -11934,  -9612\}, \{     0,    200, -11778,  -9582\},\n\
+	\{     0,    -40, -12069,  -9336\}, \{     0,   1692, -11315,  -9085\},\n\
+	\{     0,  -1753, -11445,  -9482\}, \{     0,  -2520, -12620, -10068\},\n\
+	\{     0,  -1976, -12674, -10218\}, \{     0,  -1984, -12525, -10354\},\n\
+	\{     0,  -2272, -13476, -10932\}, \{     0,  -2123, -13918, -11095\},\n\
+	\{     0,  -2883, -14447, -11659\}, \{     0,  -2826, -13946, -11563\},\n\
+	\{     0,  -2697, -13680, -11328\}, \{     0,  -3068, -13393, -11614\},\n\
+	\{     0,  -2935, -13074, -11882\}, \{     0,  -3017, -13038, -11163\},\n\
+	\{     0,  -2490, -12379, -11288\}, \{     0,  -2463, -12286, -10726\},\n\
+	\{     0,  -2686, -12167, -10673\}, \{     0,  -2428, -12077, -10555\},\n\
+	\{     0,  -2282, -12564, -10388\}, \{     0,  -2017, -12303, -10844\},\n\
+	\{     0,  -2329, -12637, -11250\}, \{     0,  -2703, -13362, -11807\},\n\
+	\{     0,  -1820, -12605, -11733\}, \{     0,    596, -10833,  -9852\},\n\
+	\{     0,      9, -11140,  -9776\}, \{     0,     41, -11168,  -9478\},\n\
+	\{     0,   -261, -11368,  -9752\}, \{     0,    226, -11282,  -9879\},\n\
+	\{     0,    -68, -11454, -10148\}, \{     0,   -314, -12278, -10716\},\n\
+	\{     0,    -66, -11998, -10762\}, \{     0,    -58, -11469, -10664\},\n\
+	\{     0,    319, -10759, -10212\}, \{     0,    122, -11041,  -9901\},\n\
+	\{     0,   -269, -11085, -10008\}, \{     0,    637, -10569,  -9674\},\n\
+	\{     0,   1185, -10632,  -9521\}, \{     0,    902, -11053,  -9681\},\n\
+	\{     0,    560, -11408,  -9588\}, \{     0,   1162, -11079,  -9371\},\n\
+	\{     0,   1780, -10547,  -9133\}, \n\
+};"
+
+calMap[JG02]="\{\n\
+	\{     0,    509,  -2785,  -4375\}, \{     0,    655,  -3482,  -4447\},\n\
+	\{     0,    520,  -3231,  -4651\}, \{     0,    680,  -3122,  -4790\},\n\
+	\{     0,    328,  -3648,  -4712\}, \{     0,    260,  -3454,  -4515\},\n\
+	\{     0,    433,  -3027,  -4446\}, \{     0,     34,  -4304,  -4676\},\n\
+	\{     0,     54,  -3707,  -4650\}, \{     0,    -19,  -3829,  -5231\},\n\
+	\{     0,   -156,  -4018,  -5292\}, \{     0,   -331,  -4155,  -5423\},\n\
+	\{     0,   -424,  -4210,  -5207\}, \{     0,   -592,  -4131,  -5572\},\n\
+	\{     0,   -494,  -4135,  -5732\}, \{     0,   -687,  -4055,  -5030\},\n\
+	\{     0,  -1000,  -4456,  -5228\}, \{     0,   -337,  -3931,  -5340\},\n\
+	\{     0,   -168,  -3962,  -5326\}, \{     0,   -852,  -4534,  -5798\},\n\
+	\{     0,   -541,  -4458,  -5156\}, \{     0,   -842,  -5570,  -6166\},\n\
+	\{     0,  -1490,  -5883,  -6645\}, \{     0,  -1036,  -5917,  -6151\},\n\
+	\{     0,  -1369,  -5946,  -5969\}, \{     0,   -916,  -5927,  -6200\},\n\
+	\{     0,   -521,  -5595,  -6066\}, \{     0,   -823,  -5731,  -5925\},\n\
+	\{     0,   -262,  -5267,  -5315\}, \{     0,   -697,  -5434,  -5676\},\n\
+	\{     0,   -362,  -5193,  -4887\}, \{     0,   -430,  -5147,  -4911\},\n\
+	\{     0,    -94,  -5403,  -5159\}, \{     0,   -747,  -5796,  -4772\},\n\
+	\{     0,   -679,  -4909,  -4531\}, \{     0,   -500,  -5364,  -4694\},\n\
+	\{     0,   -147,  -5225,  -4463\}, \{     0,   -283,  -5815,  -4360\},\n\
+	\{     0,   -724,  -6148,  -4647\}, \{     0,   -295,  -6069,  -4375\},\n\
+	\{     0,   -397,  -6086,  -4105\}, \{     0,   -116,  -6343,  -4698\},\n\
+	\{     0,   -589,  -6398,  -5353\}, \{     0,  -1068,  -6640,  -5014\},\n\
+	\{     0,   -785,  -7017,  -5093\}, \{     0,    -29,  -6238,  -5186\},\n\
+	\{     0,    380,  -6370,  -5063\}, \{     0,   -239,  -7191,  -5605\},\n\
+	\{     0,    321,  -7256,  -5177\}, \{     0,    430,  -6673,  -4887\},\n\
+	\{     0,    226,  -7136,  -5687\}, \{     0,    142,  -7175,  -5498\},\n\
+	\{     0,    333,  -6596,  -5434\}, \{     0,    315,  -6574,  -5520\},\n\
+	\{     0,   -109,  -6681,  -5798\}, \{     0,   -587,  -7290,  -5748\},\n\
+	\{     0,   -229,  -7105,  -5463\}, \{     0,   -480,  -7092,  -6033\},\n\
+	\{     0,  -1162,  -7488,  -6578\}, \{     0,  -1244,  -8230,  -6838\},\n\
+	\{     0,   -941,  -7941,  -6976\}, \{     0,  -1181,  -7816,  -6868\},\n\
+	\{     0,  -1792,  -8128,  -6590\}, \{     0,   -644,  -7614,  -4524\},\n\
+	\{     0,   -873,  -7358,  -3775\}, \{     0,  -1250,  -7370,  -4506\},\n\
+	\{     0,   -819,  -7520,  -4500\}, \{     0,  -1579,  -8679,  -4626\},\n\
+	\{     0,  -1332,  -7353,  -4338\}, \{     0,  -1128,  -7821,  -5030\},\n\
+	\{     0,   -927,  -7988,  -4954\}, \{     0,  -2035,  -7884,  -5097\},\n\
+	\{     0,  -2533,  -8953,  -6171\}, \{     0,  -1576,  -8029,  -5542\},\n\
+	\{     0,  -1185,  -7297,  -5523\}, \{     0,  -2139,  -8830,  -6236\},\n\
+	\{     0,  -2137,  -8976,  -6225\}, \{     0,  -1387,  -8252,  -6043\},\n\
+	\{     0,  -1139,  -8286,  -5988\}, \{     0,  -1252,  -8224,  -6388\},\n\
+	\{     0,  -1617,  -8211,  -5983\}, \n\
+};"
+
+calMap[JG03]="\{\n\
+	\{     0,  -5670, -14728, -16999\}, \{     0,  -5942, -14703, -17077\},\n\
+	\{     0,  -5889, -14421, -16670\}, \{     0,  -6039, -14464, -16644\},\n\
+	\{     0,  -5991, -14403, -16390\}, \{     0,  -6103, -14418, -16510\},\n\
+	\{     0,  -5953, -14364, -16180\}, \{     0,  -6154, -14364, -16125\},\n\
+	\{     0,  -5945, -14263, -15929\}, \{     0,  -6075, -14327, -15930\},\n\
+	\{     0,  -5928, -14392, -15878\}, \{     0,  -5986, -14443, -15932\},\n\
+	\{     0,  -5783, -14256, -15873\}, \{     0,  -5945, -14360, -15887\},\n\
+	\{     0,  -5749, -14536, -15874\}, \{     0,  -5733, -14684, -15887\},\n\
+	\{     0,  -5630, -14594, -15987\}, \{     0,  -5752, -14743, -16002\},\n\
+	\{     0,  -5490, -14694, -15993\}, \{     0,  -5481, -14866, -16056\},\n\
+	\{     0,  -5293, -14807, -16060\}, \{     0,  -7935, -20143, -18383\},\n\
+	\{     0,  -7733, -20142, -18482\}, \{     0,  -7628, -20060, -18538\},\n\
+	\{     0,  -7437, -20112, -18495\}, \{     0,  -7314, -20012, -18544\},\n\
+	\{     0,  -7072, -19980, -18573\}, \{     0,  -6986, -20006, -18632\},\n\
+	\{     0,  -6718, -20048, -18569\}, \{     0,  -6601, -19987, -18517\},\n\
+	\{     0,  -6485, -20035, -18537\}, \{     0,  -6292, -20047, -18537\},\n\
+	\{     0,  -6105, -20153, -18482\}, \{     0,  -6081, -20314, -18501\},\n\
+	\{     0,  -5865, -19916, -18164\}, \{     0,  -5786, -20218, -18174\},\n\
+	\{     0,  -5728, -20282, -18110\}, \{     0,  -5690, -20451, -18135\},\n\
+	\{     0,  -5643, -20768, -18154\}, \{     0,  -5603, -20874, -18273\},\n\
+	\{     0,  -5621, -21190, -18095\}, \{     0,  -5522, -21547, -18146\},\n\
+	\{     0,  -5549, -20721, -16825\}, \{     0,  -5547, -21087, -17001\},\n\
+	\{     0,  -5491, -21394, -17040\}, \{     0,  -5484, -21696, -17064\},\n\
+	\{     0,  -5542, -22265, -17091\}, \{     0,  -5483, -22543, -17198\},\n\
+	\{     0,  -5460, -22748, -17254\}, \{     0,  -5417, -22961, -17307\},\n\
+	\{     0,  -5455, -23299, -17323\}, \{     0,  -5445, -23552, -17382\},\n\
+	\{     0,  -5426, -23645, -17428\}, \{     0,  -5480, -23902, -17349\},\n\
+	\{     0,  -5558, -24011, -17360\}, \{     0,  -5569, -24032, -17326\},\n\
+	\{     0,  -5614, -24067, -17305\}, \{     0,  -5656, -24000, -17251\},\n\
+	\{     0,  -5739, -23971, -17228\}, \{     0,  -5777, -23886, -17215\},\n\
+	\{     0,  -5832, -23823, -17051\}, \{     0,  -5891, -23719, -16957\},\n\
+	\{     0,  -6007, -23598, -16925\}, \{     0,  -5893, -20829, -15256\},\n\
+	\{     0,  -5886, -20669, -15091\}, \{     0,  -5883, -20496, -14990\},\n\
+	\{     0,  -5969, -20469, -14898\}, \{     0,  -5971, -20245, -14876\},\n\
+	\{     0,  -5996, -20108, -14764\}, \{     0,  -5979, -19934, -14694\},\n\
+	\{     0,  -5997, -19721, -14571\}, \{     0,  -6046, -19573, -14456\},\n\
+	\{     0,  -6001, -19418, -14381\}, \{     0,  -5942, -19239, -14265\},\n\
+	\{     0,  -5978, -19040, -14240\}, \{     0,  -5928, -18873, -14317\},\n\
+	\{     0,  -5917, -18715, -14238\}, \{     0,  -5865, -18576, -14201\},\n\
+	\{     0,  -5750, -18386, -14200\}, \{     0,  -5772, -18299, -14235\},\n\
+	\{     0,  -5754, -18187, -14300\}, \n\
+};"
+
+calMap[JG05]="\{\n\
+	\{     0,    178,  -7222,   8474\}, \{     0,    218,  -7139,   8383\},\n\
+	\{     0,    215,  -7438,   8352\}, \{     0,    198,  -7247,   8498\},\n\
+	\{     0,    138,  -7640,   8644\}, \{     0,    158,  -7805,   8610\},\n\
+	\{     0,    135,  -7804,   8531\}, \{     0,    143,  -7881,   8575\},\n\
+	\{     0,    165,  -8096,   8584\}, \{     0,    118,  -7962,   8558\},\n\
+	\{     0,    148,  -7947,   8550\}, \{     0,    118,  -8193,   8494\},\n\
+	\{     0,    149,  -8042,   8441\}, \{     0,     59,  -8207,   8454\},\n\
+	\{     0,    101,  -8029,   8575\}, \{     0,    156,  -8029,   8422\},\n\
+	\{     0,    205,  -8074,   8451\}, \{     0,    167,  -7912,   8405\},\n\
+	\{     0,    263,  -7980,   8405\}, \{     0,    258,  -8007,   8404\},\n\
+	\{     0,    288,  -7790,   8342\}, \{     0,   -802, -10286,   6559\},\n\
+	\{     0,   -717, -10120,   6574\}, \{     0,   -590,  -9884,   6675\},\n\
+	\{     0,   -446,  -9651,   6686\}, \{     0,   -371,  -9600,   6700\},\n\
+	\{     0,   -259,  -9243,   6756\}, \{     0,    -77,  -9216,   6768\},\n\
+	\{     0,    108,  -8979,   6844\}, \{     0,    220,  -8769,   6970\},\n\
+	\{     0,    348,  -8820,   6991\}, \{     0,    569,  -8618,   7028\},\n\
+	\{     0,    688,  -8430,   7162\}, \{     0,    798,  -8520,   7293\},\n\
+	\{     0,   1050,  -8141,   7758\}, \{     0,   1284,  -7775,   7850\},\n\
+	\{     0,   1447,  -7625,   7967\}, \{     0,   1527,  -7708,   8032\},\n\
+	\{     0,   1661,  -7547,   8153\}, \{     0,   1784,  -7532,   8169\},\n\
+	\{     0,   1863,  -7560,   8430\}, \{     0,   1977,  -7617,   8609\},\n\
+	\{     0,   1318,  -6902,   8849\}, \{     0,   1390,  -7060,   8848\},\n\
+	\{     0,   1470,  -6967,   8872\}, \{     0,   1532,  -6958,   8915\},\n\
+	\{     0,   1607,  -7162,   8946\}, \{     0,   1718,  -7119,   9030\},\n\
+	\{     0,   1781,  -6970,   9113\}, \{     0,   1807,  -6943,   9071\},\n\
+	\{     0,   1831,  -7114,   9061\}, \{     0,   1899,  -7105,   9088\},\n\
+	\{     0,   1935,  -7026,   9070\}, \{     0,   2040,  -6685,   9125\},\n\
+	\{     0,  -8187,  -6757,   9115\}, \{     0, -10749,  -6464,   9194\},\n\
+	\{     0, -21024,  -6513,   9071\}, \{     0,   6072,  -6529,   9040\},\n\
+	\{     0, -22290,  -6590,   9075\}, \{     0, -12054,  -6510,   9114\},\n\
+	\{     0, -18487,  -6491,   9179\}, \{     0, -12050,  -6878,   9144\},\n\
+	\{     0,  -4425,  -6526,   9189\}, \{     0,   2575,  -4991,  10202\},\n\
+	\{     0,   2566,  -4792,  10308\}, \{     0,   2596,  -4920,  10513\},\n\
+	\{     0,   2585,  -5106,  10573\}, \{     0,   2538,  -5290,  10578\},\n\
+	\{     0,   2560,  -5424,  10627\}, \{     0,   2613,  -5352,  10915\},\n\
+	\{     0,   2531,  -5578,  10919\}, \{     0,   2545,  -5652,  11012\},\n\
+	\{     0,   2646,  -5819,  11079\}, \{     0,   2661,  -6046,  11136\},\n\
+	\{     0,   2692,  -6314,  11187\}, \{     0,   2759,  -6284,  11209\},\n\
+	\{     0,   2739,  -6557,  11185\}, \{     0,   2815,  -6469,  11256\},\n\
+	\{     0,   2849,  -6807,  11103\}, \{     0,   2850,  -6769,  11097\},\n\
+	\{     0,   2923,  -6999,  11232\}, \n\
+};"
+
+calMap[JG06]="\{\n\
+	\{     0,  -3836,  -1067,   4891\}, \{     0,  -4831,  -2098,   4103\},\n\
+	\{     0,  -4849,  -1871,   4566\}, \{     0,  -4534,  -1666,   4512\},\n\
+	\{     0,  -5764,  -2767,   4245\}, \{     0,  -5591,  -2123,   4174\},\n\
+	\{     0,  -4727,  -1565,   4368\}, \{     0,  -5834,  -2262,   3942\},\n\
+	\{     0,  -5421,  -2062,   3790\}, \{     0,  -4996,  -1380,   4260\},\n\
+	\{     0,  -5538,  -1861,   3494\}, \{     0,  -5272,  -1652,   3740\},\n\
+	\{     0,  -5561,  -1802,   4038\}, \{     0,  -5320,  -1734,   3742\},\n\
+	\{     0,  -4354,  -1230,   4170\}, \{     0,  -5705,  -1862,   3840\},\n\
+	\{     0,  -6223,  -2211,   3218\}, \{     0,  -5048,  -1596,   3669\},\n\
+	\{     0,  -5235,  -1541,   3735\}, \{     0,  -6009,  -2219,   3301\},\n\
+	\{     0,  -5545,  -1879,   3686\}, \{     0,  -7174,  -2853,   -434\},\n\
+	\{     0,  -6759,  -3117,     56\}, \{     0,  -7376,  -3291,    221\},\n\
+	\{     0,  -7601,  -3243,    150\}, \{     0,  -7065,  -2752,    -42\},\n\
+	\{     0,  -7701,  -2828,   -144\}, \{     0,  -7598,  -3002,    464\},\n\
+	\{     0,  -7312,  -2476,    399\}, \{     0,  -7939,  -2374,    -62\},\n\
+	\{     0,  -7622,  -2213,    482\}, \{     0,  -6715,  -1688,   1033\},\n\
+	\{     0,  -6755,  -1445,    722\}, \{     0,  -6817,  -1385,   1061\},\n\
+	\{     0,  -6155,   -864,   1431\}, \{     0,  -6700,  -1746,   1070\},\n\
+	\{     0,  -6973,  -1127,    835\}, \{     0,  -6456,  -1152,    686\},\n\
+	\{     0,  -6542,  -1505,   1059\}, \{     0,  -6659,  -1374,    584\},\n\
+	\{     0,  -6605,   -983,    630\}, \{     0,  -6366,  -1046,    800\},\n\
+	\{     0,  -4668,    343,   1086\}, \{     0,  -5072,    560,    468\},\n\
+	\{     0,  -4124,   1399,   1284\}, \{     0,  -3465,  10068,  22599\},\n\
+	\{     0,  -4167,   2018,   1119\}, \{     0,  -4910,   1612,    717\},\n\
+	\{     0,  -4917,   1600,    968\}, \{     0,  -4171,   1731,    430\},\n\
+	\{     0,  -3432,  13873,    166\}, \{     0,  -3571,   2840,    870\},\n\
+	\{     0,  -3060,   2468,    463\}, \{     0,  -2858,   2369,    373\},\n\
+	\{     0,  -2948,   3186,    438\}, \{     0,  -3305,   2984,   -160\},\n\
+	\{     0,  -2027,   3128,   -798\}, \{     0,  -2663,   3320,   -865\},\n\
+	\{     0,  -3992,   -562,  -1509\}, \{     0,  -2913,   2844,  -1081\},\n\
+	\{     0,  -3205,   3373,  -1418\}, \{     0,  -3366,   3063,  -1645\},\n\
+	\{     0,  -3878,   2873,   -920\}, \{     0,  -1801,   6168,   2384\},\n\
+	\{     0,  -1252,   6409,   2308\}, \{     0,  -1724,   6027,   2474\},\n\
+	\{     0,  -1937,   5849,   2730\}, \{     0,  -1921,   5622,   2349\},\n\
+	\{     0,  -2162,   5995,  -1804\}, \{     0,  -1707,   6306,   2744\},\n\
+	\{     0,  -1334,   5651,   3112\}, \{     0,  -2132,   5216,   2588\},\n\
+	\{     0,  -1878,   5912,   2448\}, \{     0,  -1233,   5205,   2467\},\n\
+	\{     0,  -1139,   5350,   2967\}, \{     0,  -2373,   5368, -23580\},\n\
+	\{     0,  -1706,   5450,   2374\}, \{     0,  -1718,   5876,   2333\},\n\
+	\{     0,  -1569,   5961,   2570\}, \{     0,  -1177,   6423,   2665\},\n\
+	\{     0,  -1210,   5976,   2608\}, \n\
+};"
+
+calMap[LJ01]="\{\n\
+	\{     0,   5716,  -1041, -12697\}, \{     0,   5110,  -1450, -13222\},\n\
+	\{     0,   4487,  -1630, -13282\}, \{     0,   4606,  -1821, -13197\},\n\
+	\{     0,   4663,  -2299, -13302\}, \{     0,   4092,  -2324, -13451\},\n\
+	\{     0,   4233,  -2419, -13189\}, \{     0,   3702,  -2961, -14147\},\n\
+	\{     0,   3167,  -3408, -14660\}, \{     0,   3564,  -3255, -13877\},\n\
+	\{     0,   3320,  -3407, -13671\}, \{     0,   3137,  -3350, -13820\},\n\
+	\{     0,   3342,  -3703, -13808\}, \{     0,   3519,  -3970, -14069\},\n\
+	\{     0,   2983,  -4415, -14335\}, \{     0,   3636,  -3825, -13840\},\n\
+	\{     0,   3461,  -3922, -14323\}, \{     0,   3419,  -4022, -14031\},\n\
+	\{     0,   3763,  -4066, -13832\}, \{     0,   3929,  -3504, -13827\},\n\
+	\{     0,   3634,  -4035, -14096\}, \{     0,   3195,  -6232, -14808\},\n\
+	\{     0,   3428,  -6179, -14913\}, \{     0,   3506,  -5525, -14510\},\n\
+	\{     0,   3754,  -5724, -14134\}, \{     0,   3630,  -5791, -14743\},\n\
+	\{     0,   3857,  -5548, -14269\}, \{     0,   4654,  -4964, -13701\},\n\
+	\{     0,   4853,  -4388, -13822\}, \{     0,   4735,  -4632, -13864\},\n\
+	\{     0,   4981,  -4381, -13979\}, \{     0,   5528,  -3984, -13626\},\n\
+	\{     0,   5130,  -4326, -13639\}, \{     0,   5095,  -3792, -13638\},\n\
+	\{     0,   5346,  -3366, -13030\}, \{     0,   5498,  -3496, -13682\},\n\
+	\{     0,   5144,  -3120, -13986\}, \{     0,   5427,  -2871, -12931\},\n\
+	\{     0,   5939,  -2824, -12646\}, \{     0,   6030,  -2983, -12662\},\n\
+	\{     0,   5959,  -3142, -12116\}, \{     0,   5903,  -2700, -11731\},\n\
+	\{     0,   6256,  -3546, -10932\}, \{     0,   6384,  -3767, -11326\},\n\
+	\{     0,   6086,  -3399, -11769\}, \{     0,   5915,  -3257, -12066\},\n\
+	\{     0,   6257,  -4021, -12273\}, \{     0,   6084,  -4192, -12153\},\n\
+	\{     0,   5482,  -4102, -12637\}, \{     0,   5836,  -3698, -12767\},\n\
+	\{     0,   6025,  -4014, -13219\}, \{     0,   5713,  -3812, -14315\},\n\
+	\{     0,   5997,  -3855, -14788\}, \{     0,   5866,  -3905, -15408\},\n\
+	\{     0,   5328,  -4627, -16458\}, \{     0,   5686,  -3646, -14885\},\n\
+	\{     0,   5551,  -3407, -15112\}, \{     0,   5720,  -3165, -14247\},\n\
+	\{     0,   6044,  -3818, -14224\}, \{     0,   5963,  -3342, -14531\},\n\
+	\{     0,   6128,  -3225, -13495\}, \{     0,   6564,  -3662, -13408\},\n\
+	\{     0,   6000,  -3479, -13609\}, \{     0,   5876,  -3190, -11817\},\n\
+	\{     0,   7165,  -2876, -10874\}, \{     0,   6593,  -4000, -11565\},\n\
+	\{     0,   6207,  -3694, -11278\}, \{     0,   6732,  -2326, -11167\},\n\
+	\{     0,   6335,  -3650, -11508\}, \{     0,   6220,  -4220, -12438\},\n\
+	\{     0,   6069,  -3838, -12545\}, \{     0,   6182,  -4635, -12472\},\n\
+	\{     0,   5696,  -4834, -12334\}, \{     0,   6047,  -4121, -11691\},\n\
+	\{     0,   6324,  -4125, -10980\}, \{     0,   6102,  -3923, -10939\},\n\
+	\{     0,   6091,  -3829, -10736\}, \{     0,   5858,  -4001, -10473\},\n\
+	\{     0,   5473,  -4773, -11209\}, \{     0,   6045,  -4642, -10361\},\n\
+	\{     0,   5494,  -4391, -10203\}, \n\
+};"
+
+calMap[LJ02]="\{\n\
+	\{     0,   -726,    598,  -2561\}, \{     0,   -743,    864,  -2549\},\n\
+	\{     0,   -769,    992,  -2477\}, \{     0,   -905,    665,  -2742\},\n\
+	\{     0,   -944,    665,  -2710\}, \{     0,  -1180,    727,  -2794\},\n\
+	\{     0,  -1012,    642,  -2599\}, \{     0,  -1195,    690,  -2770\},\n\
+	\{     0,  -1191,    667,  -2846\}, \{     0,  -1173,    684,  -2759\},\n\
+	\{     0,  -1158,    708,  -2795\}, \{     0,  -1072,    678,  -2852\},\n\
+	\{     0,  -1175,    872,  -2747\}, \{     0,  -1011,    862,  -2673\},\n\
+	\{     0,  -1086,    755,  -2927\}, \{     0,  -1042,   1076,  -2731\},\n\
+	\{     0,  -1042,    914,  -2765\}, \{     0,   -758,   1182,  -2443\},\n\
+	\{     0,   -757,   1219,  -2500\}, \{     0,   -534,   1472,  -2295\},\n\
+	\{     0,   -497,   1543,  -2104\}, \{     0,  -1267,   -632,  -3273\},\n\
+	\{     0,  -1133,   -761,  -3048\}, \{     0,  -1065,   -375,  -2952\},\n\
+	\{     0,   -722,   -133,  -2551\}, \{     0,   -586,     52,  -2505\},\n\
+	\{     0,   -546,     67,  -2219\}, \{     0,   -477,    177,  -2017\},\n\
+	\{     0,   -317,    317,  -1888\}, \{     0,   -161,    364,  -1712\},\n\
+	\{     0,      5,    359,  -1770\}, \{     0,   -283,    214,  -1901\},\n\
+	\{     0,    -59,    353,  -1551\}, \{     0,    108,    454,  -1465\},\n\
+	\{     0,    -74,    796,  -1225\}, \{     0,     41,    685,  -1221\},\n\
+	\{     0,     84,    576,  -1318\}, \{     0,     14,    504,  -1313\},\n\
+	\{     0,     37,    448,  -1301\}, \{     0,     18,    344,  -1408\},\n\
+	\{     0,    -70,    240,  -1384\}, \{     0,    -27,    186,  -1595\},\n\
+	\{     0,    622,    981,   -855\}, \{     0,    351,    889,  -1188\},\n\
+	\{     0,    475,    758,  -1328\}, \{     0,    305,   1025,  -1222\},\n\
+	\{     0,    526,    609,  -1397\}, \{     0,    398,    426,  -1695\},\n\
+	\{     0,    237,    543,  -1835\}, \{     0,    357,    739,  -1747\},\n\
+	\{     0,    400,    699,  -1834\}, \{     0,    319,    943,  -1998\},\n\
+	\{     0,    244,    783,  -2197\}, \{     0,    249,    976,  -2195\},\n\
+	\{     0,    266,    859,  -2406\}, \{     0,    332,    959,  -2477\},\n\
+	\{     0,    225,    968,  -2554\}, \{     0,     97,    808,  -2815\},\n\
+	\{     0,     73,    895,  -2852\}, \{     0,   -155,    877,  -2986\},\n\
+	\{     0,    -71,    914,  -2943\}, \{     0,   -232,    862,  -2966\},\n\
+	\{     0,   -347,    772,  -3176\}, \{     0,    675,    250,   -956\},\n\
+	\{     0,    589,    204,   -935\}, \{     0,    459,    110,   -867\},\n\
+	\{     0,    149,    -88,  -1251\}, \{     0,    272,   -145,   -930\},\n\
+	\{     0,    304,    -62,   -857\}, \{     0,     24,   -487,  -1384\},\n\
+	\{     0,     51,    -31,   -984\}, \{     0,    154,    -77,   -992\},\n\
+	\{     0,    -23,   -238,  -1234\}, \{     0,     28,   -331,  -1323\},\n\
+	\{     0,    104,   -415,  -1424\}, \{     0,   -177,   -633,  -1704\},\n\
+	\{     0,     21,   -514,  -1572\}, \{     0,    210,   -796,  -1584\},\n\
+	\{     0,    133,   -693,  -1782\}, \{     0,    161,   -882,  -1824\},\n\
+	\{     0,    118,  -1098,  -1994\}, \n\
+};"
+
+calMap[LJ03]="\{\n\
+	\{     0,  13063,  -4747, -10433\}, \{     0,   3443,  -4140,  -9849\},\n\
+	\{     0,   7069,  -4629, -10540\}, \{     0,  13946,  -4544, -10775\},\n\
+	\{     0,  12968,  -4307, -10347\}, \{     0,  20281,  -5019, -11282\},\n\
+	\{     0,  22661,  -5079, -11148\}, \{     0,  16734,  -4442, -10374\},\n\
+	\{     0,  15423,  -4074, -10422\}, \{     0,  22851,  -4441, -10405\},\n\
+	\{     0,  14291,  -3978,  -9960\}, \{     0,   4367,  -3954,  -9810\},\n\
+	\{     0,  11785,  -3957, -10150\}, \{     0,   3218,  -3775,  -9825\},\n\
+	\{     0,   3344,  -3314,  -9254\}, \{     0,   6873,  -3528,  -9614\},\n\
+	\{     0,   3630,  -3230,  -9069\}, \{     0,   3442,  -3275,  -9653\},\n\
+	\{     0,   3346,  -3858,  -9895\}, \{     0,   3721,  -3391,  -9296\},\n\
+	\{     0,   3261,  -3428,  -9383\}, \{     0, -24770,  -8031, -10490\},\n\
+	\{     0, -24608,  -7690, -10198\}, \{     0, -24868,  -7897,  -9937\},\n\
+	\{     0, -24880,  -7994, -10295\}, \{     0, -24908,  -7089, -10312\},\n\
+	\{     0, -24547,  -7588, -10044\}, \{     0, -24905,  -8076,  -9985\},\n\
+	\{     0, -24646,  -7229,  -9709\}, \{     0, -24916,  -7800, -10193\},\n\
+	\{     0, -25334,  -8019, -10733\}, \{     0, -24839,  -7637, -10037\},\n\
+	\{     0, -25020,  -7138,  -9907\}, \{     0, -24502,  -7503, -10369\},\n\
+	\{     0, -24471,  -7222, -10546\}, \{     0, -24537,  -7066, -10359\},\n\
+	\{     0, -24407,  -6616,  -9797\}, \{     0, -23898,  -7370, -10755\},\n\
+	\{     0, -24587,  -7630, -10656\}, \{     0, -24411,  -7258, -11072\},\n\
+	\{     0, -24028,  -7203, -10471\}, \{     0, -24139,  -7585, -10014\},\n\
+	\{     0, -23817,  -6456, -10002\}, \{     0, -24122,  -6453, -10354\},\n\
+	\{     0,  25236,  -6345,  -9380\}, \{     0,  25260,  -6144,  -9727\},\n\
+	\{     0, -25031,  -6591, -10264\}, \{     0,  11624,  -6478, -10071\},\n\
+	\{     0,  11896,  -5407,  -9780\}, \{     0,  14144,  -5554, -10328\},\n\
+	\{     0,   5556,  -5558, -10775\}, \{     0,   3406,  -5945, -10115\},\n\
+	\{     0,   3384,  -5384, -10050\}, \{     0,   3263,  -4468,  -9634\},\n\
+	\{     0,   5991,  -4734,  -9494\}, \{     0,   3953,  -5377, -10430\},\n\
+	\{     0,   4514,  -3687,  -9547\}, \{     0,   4487,  -3691,  -9332\},\n\
+	\{     0,   5085,  -4417,  -9657\}, \{     0,   5222,  -3694,  -9115\},\n\
+	\{     0,   4960,  -4086,  -8862\}, \{     0,   4994,  -4292,  -9127\},\n\
+	\{     0,   5162,  -4509,  -8554\}, \{     0,   4337,  -5390,  -8443\},\n\
+	\{     0,   4628,  -4976,  -9047\}, \{     0,   4293,  -4876,  -9218\},\n\
+	\{     0,   4465,  -5352,  -9014\}, \{     0,   4428,  -4936,  -9521\},\n\
+	\{     0,   4048,  -5497,  -9795\}, \{     0,   4290,  -6034,  -9032\},\n\
+	\{     0,   4184,  -4996,  -8434\}, \{     0,   3950,  -4983,  -8474\},\n\
+	\{     0,   4247,  -4407,  -7955\}, \{     0,   4386,  -4769,  -8079\},\n\
+	\{     0,   4311,  -5367,  -8478\}, \{     0,   4283,  -4809,  -8025\},\n\
+	\{     0,   3885,  -4011,  -7495\}, \{     0,   3885,  -4593,  -7577\},\n\
+	\{     0,   3622,  -5239,  -8157\}, \{     0,   3576,  -5007,  -7816\},\n\
+	\{     0,   3778,  -3793,  -7362\}, \n\
+};"
+
+calMap[LJ04]="\{\n\
+	\{     0,  -3188,  -5668,  -7029\}, \{     0,  -3144,  -5592,  -6708\},\n\
+	\{     0,  -3332,  -5859,  -7135\}, \{     0,  -3402,  -5694,  -6908\},\n\
+	\{     0,  -3376,  -5858,  -7070\}, \{     0,  -3383,  -5474,  -6886\},\n\
+	\{     0,  -3518,  -5487,  -6925\}, \{     0,  -3383,  -5342,  -6659\},\n\
+	\{     0,  -3487,  -5535,  -6848\}, \{     0,  -3472,  -5206,  -6576\},\n\
+	\{     0,  -3432,  -5335,  -6581\}, \{     0,  -3502,  -5071,  -6421\},\n\
+	\{     0,  -3549,  -5020,  -6390\}, \{     0,  -3618,  -4961,  -6310\},\n\
+	\{     0,  -3774,  -4938,  -6377\}, \{     0,  -3868,  -5039,  -6488\},\n\
+	\{     0,  -3865,  -4778,  -6328\}, \{     0,  -3812,  -4602,  -6360\},\n\
+	\{     0,  -3990,  -4498,  -6189\}, \{     0,  -3820,  -4493,  -6070\},\n\
+	\{     0,  -3793,  -4262,  -5963\}, \{     0,  -4355,  -5745,  -6648\},\n\
+	\{     0,  -4372,  -5742,  -6633\}, \{     0,  -4458,  -5618,  -6650\},\n\
+	\{     0,  -4484,  -5695,  -6732\}, \{     0,  -4367,  -5513,  -6642\},\n\
+	\{     0,  -4433,  -5498,  -6628\}, \{     0,  -4364,  -5480,  -6563\},\n\
+	\{     0,  -4344,  -5382,  -6497\}, \{     0,  -4255,  -5470,  -6465\},\n\
+	\{     0,  -4154,  -5145,  -6183\}, \{     0,  -4211,  -5200,  -6136\},\n\
+	\{     0,  -4086,  -5205,  -6195\}, \{     0,  -4113,  -5261,  -6338\},\n\
+	\{     0,  -4069,  -4832,  -5831\}, \{     0,  -3835,  -4826,  -5801\},\n\
+	\{     0,  -4030,  -5011,  -6065\}, \{     0,  -3711,  -4838,  -5795\},\n\
+	\{     0,  -3644,  -4881,  -5899\}, \{     0,  -3507,  -4813,  -5800\},\n\
+	\{     0,  -3453,  -4947,  -5520\}, \{     0,  -3374,  -4954,  -5642\},\n\
+	\{     0,  -4837,  -5736,  -7500\}, \{     0,  -4470,  -5620,  -7385\},\n\
+	\{     0,  -4401,  -5408,  -7370\}, \{     0,  -4271,  -5626,  -7496\},\n\
+	\{     0,  -4286,  -5828,  -7556\}, \{     0,  -4184,  -5982,  -7565\},\n\
+	\{     0,  -3923,  -5491,  -7415\}, \{     0,  -3926,  -5554,  -7685\},\n\
+	\{     0,  -3657,  -5235,  -7542\}, \{     0,  -3530,  -5104,  -7717\},\n\
+	\{     0,  -3370,  -4853,  -7737\}, \{     0,  -3224,  -4703,  -7679\},\n\
+	\{     0,  -3100,  -4620,  -7733\}, \{     0,  -3010,  -4547,  -7648\},\n\
+	\{     0,  -2838,  -4318,  -7619\}, \{     0,  -2907,  -4260,  -7604\},\n\
+	\{     0,  -2883,  -4306,  -7768\}, \{     0,  -2878,  -3949,  -7601\},\n\
+	\{     0,  -2927,  -4097,  -7840\}, \{     0,  -2816,  -3790,  -7544\},\n\
+	\{     0,  -2853,  -3654,  -7534\}, \{     0,  -2052,  -2142,  -3986\},\n\
+	\{     0,  -2109,  -2259,  -4027\}, \{     0,  -2132,  -2002,  -3745\},\n\
+	\{     0,  -2275,  -2181,  -3810\}, \{     0,  -2353,  -1951,  -3419\},\n\
+	\{     0,  -2428,  -2046,  -3391\}, \{     0,  -2537,  -1974,  -3301\},\n\
+	\{     0,  -2568,  -1805,  -3074\}, \{     0,  -2764,  -1930,  -3068\},\n\
+	\{     0,  -2793,  -1922,  -2816\}, \{     0,  -2931,  -2060,  -2982\},\n\
+	\{     0,  -3118,  -2158,  -2858\}, \{     0,  -3370,  -2240,  -3088\},\n\
+	\{     0,  -3411,  -2369,  -3055\}, \{     0,  -3867,  -2590,  -3016\},\n\
+	\{     0,  -3965,  -2696,  -3099\}, \{     0,  -4112,  -2907,  -3438\},\n\
+	\{     0,  -4226,  -2747,  -3341\}, \n\
+};"
+
+calMap[LJ06]="\{\n\
+	\{     0,  -4989,  -7102,  -2178\}, \{     0,  -5092,  -7204,  -2325\},\n\
+	\{     0,  -4959,  -7013,  -2137\}, \{     0,  -4960,  -6784,  -1920\},\n\
+	\{     0,  -5025,  -6734,  -2104\}, \{     0,  -5181,  -6637,  -2017\},\n\
+	\{     0,  -5262,  -6792,  -2110\}, \{     0,  -5362,  -6621,  -2110\},\n\
+	\{     0,  -5258,  -6451,  -2031\}, \{     0,  -5375,  -6390,  -2064\},\n\
+	\{     0,  -5280,  -6288,  -2052\}, \{     0,  -5445,  -6434,  -2101\},\n\
+	\{     0,  -5553,  -6402,  -2272\}, \{     0,  -5603,  -6628,  -2477\},\n\
+	\{     0,  -5661,  -6626,  -2492\}, \{     0,  -5731,  -6618,  -2616\},\n\
+	\{     0,  -5746,  -6626,  -2664\}, \{     0,  -6007,  -7024,  -2951\},\n\
+	\{     0,  -6018,  -7010,  -2969\}, \{     0,  -5746,  -6939,  -2833\},\n\
+	\{     0,  -5770,  -7034,  -3026\}, \{     0,  -8509,  -8777,  -6863\},\n\
+	\{     0,  -8593,  -9060,  -6868\}, \{     0,  -8514,  -9104,  -6795\},\n\
+	\{     0,  -8401,  -9387,  -6931\}, \{     0,  -8236,  -9191,  -6586\},\n\
+	\{     0,  -8155,  -9371,  -6595\}, \{     0,  -8192,  -9551,  -6363\},\n\
+	\{     0,  -7995,  -9550,  -6185\}, \{     0,  -7968,  -9690,  -6220\},\n\
+	\{     0,  -7826,  -9694,  -6052\}, \{     0,  -7694,  -9660,  -5763\},\n\
+	\{     0,  -7857, -10020,  -5947\}, \{     0,  -7543,  -9682,  -5463\},\n\
+	\{     0,  -7184,  -9071,  -4747\}, \{     0,  -7282,  -9220,  -4767\},\n\
+	\{     0,  -7417,  -9371,  -4765\}, \{     0,  -7238,  -9321,  -4430\},\n\
+	\{     0,  -7320,  -9420,  -4560\}, \{     0,  -7254,  -9185,  -4270\},\n\
+	\{     0,  -7378,  -9262,  -4324\}, \{     0,  -7078,  -9074,  -3976\},\n\
+	\{     0, -10047, -10956,  -7258\}, \{     0, -10107, -10961,  -7192\},\n\
+	\{     0, -10264, -11167,  -7427\}, \{     0, -10160, -10823,  -7282\},\n\
+	\{     0, -10276, -11378,  -7508\}, \{     0, -10576, -11282,  -7688\},\n\
+	\{     0, -10801, -11460,  -7845\}, \{     0, -10822, -10983,  -7809\},\n\
+	\{     0, -10947, -10998,  -8018\}, \{     0, -11215, -10876,  -8255\},\n\
+	\{     0, -11247, -10590,  -8188\}, \{     0, -11302, -10269,  -8237\},\n\
+	\{     0, -11583, -10213,  -8413\}, \{     0, -11561, -10001,  -8448\},\n\
+	\{     0, -11482,  -9425,  -8273\}, \{     0, -11573,  -9203,  -8344\},\n\
+	\{     0, -11661,  -8895,  -8267\}, \{     0, -11843,  -8879,  -8259\},\n\
+	\{     0, -11799,  -8715,  -8112\}, \{     0, -12002,  -8422,  -8238\},\n\
+	\{     0, -12022,  -8434,  -8409\}, \{     0,  -8755,  -4274,  -4932\},\n\
+	\{     0,  -9183,  -4523,  -5458\}, \{     0,  -9293,  -4300,  -5260\},\n\
+	\{     0,  -9530,  -4543,  -5569\}, \{     0,  -9573,  -4168,  -5429\},\n\
+	\{     0,  -9847,  -4448,  -5638\}, \{     0,  -9999,  -4504,  -5969\},\n\
+	\{     0,  -9858,  -4176,  -5716\}, \{     0,  -9988,  -4378,  -5978\},\n\
+	\{     0,  -9760,  -3942,  -5627\}, \{     0, -10072,  -4163,  -6002\},\n\
+	\{     0,  -9892,  -4091,  -5833\}, \{     0,  -9873,  -3867,  -5828\},\n\
+	\{     0,  -9911,  -4149,  -5877\}, \{     0,  -9844,  -4016,  -5908\},\n\
+	\{     0,  -9528,  -3912,  -5604\}, \{     0,  -9432,  -3911,  -5648\},\n\
+	\{     0,  -9314,  -3730,  -5422\}, \n\
+};"
+
@@ -0,0 +1,40 @@
+clear;clc;
+
+fid = fopen("../caldata", "w");
+fprintf(fid, "declare -A calMap\n");
+
+for i = 1:6
+    id = sprintf("JG%02d", i);
+    write_data(fid, pwd, id);
+end
+
+for i = 1:6
+    id = sprintf("LJ%02d", i);
+    write_data(fid, pwd, id);
+end
+
+fclose(fid);
+
+function write_data(fid, folder_name, dev_id)
+    file_path = sprintf("%s/phase_%s.mat", folder_name, dev_id);
+    if ~isfile(file_path)
+         warning('[%s] dose not exist.\n', file_path);
+         return;
+    end
+    load(file_path);
+    data = sortrows(dataDec1, 1);
+    fprintf(fid, 'calMap[%s]="\\{\\n\\\n', dev_id);
+    for i = 1:size(data,1)
+        if (mod(i, 2) == 1)
+            fprintf(fid, "\t");
+        end
+        fprintf(fid, "\\{%6d, %6d, %6d, %6d\\},", ...
+            data(i,2), data(i,3), data(i,4), data(i,5));
+        if (mod(i, 2) == 1)
+            fprintf(fid, " ");
+        else
+            fprintf(fid, "\\n\\\n");
+        end
+    end
+    fprintf(fid, '\\n\\\n};"\n\n');
+end
@@ -0,0 +1,442 @@
+'''
+    @brief This is an example plugin, can receive and send data
+    @author
+    @date
+    @license LGPL-3.0
+'''
+from PyQt5.QtWidgets import QWidget, QVBoxLayout, QHBoxLayout, QTextEdit, QPushButton, QLabel, QScrollArea, QSplitter
+from PyQt5.QtCore import Qt, pyqtSignal
+from PyQt5.QtGui import QFont, QTextCursor
+from struct import Struct
+try:
+    import utils_ui
+    from plugins.base import Plugin_Base
+    from conn import ConnectionStatus
+    from i18n import _
+    from widgets import statusBar
+except ImportError:
+    from COMTool import utils_ui
+    from COMTool.plugins.base import Plugin_Base
+    from COMTool.i18n import _
+    from COMTool.conn import  ConnectionStatus
+    from COMTool.widgets import statusBar
+
+class Plugin(Plugin_Base):
+    id = "DUIFEI"
+    name = _("DUIFEI")
+    showReceiveDataSignal = pyqtSignal(str)
+
+    def onInit(self, config):
+        '''
+            init params
+        '''
+        default = {
+            "version": 1,
+            "customSendItems": [
+                {
+                    "caption": "自检",
+                    "icon": "fa5.question-circle",
+                    "data": "5A 54 E1 DD 00 BE 02 5A FE"
+                },
+                # {
+                #     "caption": "数据发送测试 - 1",
+                #     "icon": "fa5.play-circle",
+                #     "data": ""
+                # },
+                # {
+                #     "caption": "数据发送测试 - 2",
+                #     "icon": "fa5.play-circle",
+                #     "data": ""
+                # },
+                {
+                    "caption": "装订 - 【主】反拦截小功率",
+                    "icon": "fa5.play-circle",
+                    "data": "5A 54 E3 DD 77 11 00 00 00 48 06 5A FE"
+                },
+                {
+                    "caption": "装订 - 【主】反拦截全功率",
+                    "icon": "fa5.play-circle",
+                    "data": "5A 54 E3 DD 66 11 00 00 00 37 06 5A FE"
+                },
+                {
+                    "caption": "装订 - 【主】反拦截静默",
+                    "icon": "fa5.play-circle",
+                    "data": "5A 54 E3 DD 88 11 00 00 00 59 06 5A FE"
+                },
+                {
+                    "caption": "遥测 - 【主】反拦截",
+                    "icon": "fa5.play-circle",
+                    "data": "5A 54 E6 DD 99 00 5C 03 5A FE"
+                },
+                {
+                    "caption": "点名 - 【主】反拦截",
+                    "icon": "fa5.play-circle",
+                    "data": "5A 54 E5 DD 77 00 39 03 5A FE"
+                },
+                {
+                    "caption": "装订 - 【从】拦截小功率",
+                    "icon": "fa5.play-circle",
+                    "data": "5A 54 E3 DD 77 00 00 00 00 37 06 5A FE"
+                },
+                {
+                    "caption": "装订 - 【从】拦截大功率",
+                    "icon": "fa5.play-circle",
+                    "data": "5A 54 E3 DD 66 00 00 00 00 26 06 5A FE"
+                },
+                {
+                    "caption": "装订 - 【从】拦截静默",
+                    "icon": "fa5.play-circle",
+                    "data": "5A 54 E3 DD 88 00 00 00 00 48 06 5A FE"
+                },
+                {
+                    "caption": "遥测 - 【从】拦截",
+                    "icon": "fa5.play-circle",
+                    "data": "5A 54 F6 DD 99 00 6C 03 5A FE"
+                },
+                {
+                    "caption": "点名 - 【从】拦截",
+                    "icon": "fa5.play-circle",
+                    "data": "5A 54 F5 DD 77 00 49 03 5A FE"
+                }
+            ]
+        }
+        self.config = config
+        for k in default:
+            if not k in self.config:
+                self.config[k] = default[k]
+
+    def onConnChanged(self, status:ConnectionStatus, msg:str):
+        print("-- connection changed: {}, msg: {}".format(status, msg))
+
+    def onWidgetMain(self, parent):
+        '''
+            main widget, just return a QWidget object
+        '''
+        self.mainWidget = QSplitter(Qt.Vertical)
+        # receive widget
+        self.receiveWidget = QTextEdit("")
+        font = QFont('Consolas, DejaVu Sans Mono, Courier New, monospace, Microsoft YaHei', 10)
+        self.receiveWidget.setFont(font)
+        self.receiveWidget.setLineWrapMode(QTextEdit.NoWrap)
+        # clear button
+        self.clearBtn = QPushButton("")
+        utils_ui.setButtonIcon(self.clearBtn, "mdi6.broom")
+        # send scroll
+        self.customSendScroll = QScrollArea()
+        self.customSendScroll.setMinimumHeight(20)
+        self.customSendScroll.setWidgetResizable(True)
+        self.customSendScroll.setVerticalScrollBarPolicy(Qt.ScrollBarAsNeeded)
+        self.customSendScroll.setHorizontalScrollBarPolicy(Qt.ScrollBarAlwaysOff)
+        cutomSendItemsWraper = QWidget()
+        self.customSendScroll.setWidget(cutomSendItemsWraper)
+
+        # -- wrapper widget
+        cutomSendItemsWraper0 = QWidget()
+        cutomSendItemsWraper0.setProperty("class", "scrollbar2")
+        layout0 = QVBoxLayout()
+        layout0.setContentsMargins(0,8,0,0)
+        cutomSendItemsWraper0.setLayout(layout0)
+        layout0.addWidget(self.customSendScroll)
+        customSendItemsLayoutWrapper = QVBoxLayout()
+        customSendItemsLayoutWrapper.setContentsMargins(0,0,0,0)
+        cutomSendItemsWraper.setLayout(customSendItemsLayoutWrapper)
+
+        # -- items container
+        self.customItems = QWidget()
+        self.customSendItemsLayout = QVBoxLayout()
+        self.customSendItemsLayout.setContentsMargins(0,0,0,0)
+        self.customItems.setLayout(self.customSendItemsLayout)
+        customSendItemsLayoutWrapper.addWidget(self.customItems)
+        customSendItemsLayoutWrapper.addStretch(0)
+
+        # add widgets
+        self.mainWidget.addWidget(self.receiveWidget)
+        self.mainWidget.addWidget(self.clearBtn)
+        self.mainWidget.addWidget(cutomSendItemsWraper0)
+        self.mainWidget.setStretchFactor(0, 2)
+        self.mainWidget.setStretchFactor(1, 1)
+        self.mainWidget.setStretchFactor(2, 11)
+
+        # event
+        def clearReceived():
+            self.receiveWidget.clear();self.statusBar.clear()
+        self.clearBtn.clicked.connect(clearReceived)
+        return self.mainWidget
+
+    def onWidgetStatusBar(self, parent):
+        self.statusBar = statusBar(rxTxCount=True)
+        return self.statusBar
+
+    def onUiInitDone(self):
+        '''
+            UI init done, you can update your widget here
+            this method runs in UI thread, do not block too long
+        '''
+        newItems = []
+        print(self.config["customSendItems"])
+        for item in self.config["customSendItems"]:
+            print(item)
+            item = self.insertSendItem(item, load=True)
+            newItems.append(item)
+        self.config["customSendItems"] = newItems
+        self.showReceiveDataSignal.connect(self.showReceivedData)
+        # frame struct
+        self.structSelfTestRsp = Struct("<BB B BBBbbb BbBBB BB")
+        self.structStatusCheckRsp = Struct("<BB Q      HIII      IBBBBI BBHH HHHIIIIII i II 4s      IIII d Q dBB dB H B 3s      BBBbbb BbBBB 2s")
+        self.structFljData = Struct("<dddd IHI fff fff")
+        self.structLjData = Struct("<IHI ffff IHI fff fff fff IHI fff fff fff IHI fff fff fff I")
+        self.structSysInfo = Struct("<IHI H B I B fff fff fff")
+
+    def insertSendItem(self, item = None, load = False):
+        caption = item["caption"]
+        itemWidget = QWidget()
+        layout = QHBoxLayout()
+        layout.setContentsMargins(0,0,0,0)
+        itemWidget.setLayout(layout)
+        send = QPushButton("")
+        label = QLabel(caption)
+        if (not "icon" in item) or not item["icon"]:
+            item["icon"] = "fa.send"
+        utils_ui.setButtonIcon(send, item["icon"])
+        send.setProperty("class", "smallBtn")
+        def sendCustomData(idx):
+            self.sendCustomItem(self.config["customSendItems"][idx])
+        send.clicked.connect(lambda: sendCustomData(self.customSendItemsLayout.indexOf(itemWidget)))
+        layout.addWidget(label)
+        layout.addWidget(send)
+        self.customSendItemsLayout.addWidget(itemWidget)
+        if not load:
+            self.config["customSendItems"].append(item)
+        return item
+
+    def showReceivedData(self, text: str):
+        curScrollValue = self.receiveWidget.verticalScrollBar().value()
+        self.receiveWidget.moveCursor(QTextCursor.End)
+        endScrollValue = self.receiveWidget.verticalScrollBar().value()
+        self.receiveWidget.insertPlainText(text)
+        if curScrollValue < endScrollValue:
+            self.receiveWidget.verticalScrollBar().setValue(curScrollValue)
+        else:
+            self.receiveWidget.moveCursor(QTextCursor.End)
+
+    def onReceived(self, data : bytes):
+        '''
+            call in receive thread, not UI thread
+        '''
+        self.statusBar.addRx(len(data))
+        ## Apply data validation check
+        if len(data) < 7:
+            self.showReceiveDataSignal.emit("\n### Wrong data format: wrong frame header/tail\n")
+            return
+
+        dataLen = data[-3]
+        if data[0] != 0x5A or data[1] != 0x54 or data[-1] != 0xFE or data[-2] != 0x5A:
+            self.showReceiveDataSignal.emit("\n### Wrong data format: wrong length\n")
+
+        checkSum = 0
+        for i in data[2:-4]:
+            checkSum += i
+        if checkSum & 0xFF != data[-4]:
+            self.showReceiveDataSignal.emit("\n### Wrong data format: wrong check sum\n")
+
+        ## Eval data
+        data = data[2:-5].replace(b'\x00\x54\xFE', b'\x54\xFE')
+        # self.printFrame(data)
+        if data[0] == 0xE1:
+            # eval self test
+            self.showReceiveDataSignal.emit(self.evalSelfTestRsp(data) + "\n")
+        elif data[0] == 0xE6 or data[0] == 0xF6:
+            self.showReceiveDataSignal.emit(self.evalStatusCheckRsp(data) + "\n")
+        elif data[0] == 0xE5 or data[0] == 0xF5:
+            self.showReceiveDataSignal.emit('Retrieved Data Frame:\n' + self.printFrame(data) + "\n")
+        else:
+            self.showReceiveDataSignal.emit(f"\n### Unexpected response code 0x{data[0]:02x}.\n")
+
+    def evalSelfTestRsp(self, data: bytes):
+        try:
+            payload = self.structSelfTestRsp.unpack(data)
+        except :
+            return f"\n### evalSelfTestRsp:: Failed to unpack data (data length {len(data)} byte).\n"
+
+        ret = "----------- 自检回令 -----------\n"
+
+        ret += f"节点编号: 0x{payload[-2]:02X}\n"
+
+        ret += "节点类型: "
+        if payload[1] == 0xDD:
+            ret += f"K频段 (0x{payload[1]:02X})\n"
+        elif payload[1] == 0xEE:
+            ret += f"S频段 (0x{payload[1]:02X})\n"
+        else:
+            ret += f"【未知错误】(0x{payload[1]:02X})\n"
+
+        ret += "自检结果: "
+        if payload[2] == 0xAA:
+            ret += f"正常 (0x{payload[2]:02X})\n"
+        elif payload[2] == 0x55:
+            ret += f"异常 (0x{payload[2]:02X})\n"
+        else:
+            ret += f"【未知错误】(0x{payload[2]:02X})\n"
+
+        hwOffset = 3
+
+        ret += f"FPGA 电压监测: {bin(payload[hwOffset+0])[2:].zfill(8)}\n"
+        ret += f"时钟锁定状态:   {bin(payload[hwOffset+1])[2:].zfill(8)}\n"
+        ret += f"AD 锁定状态:   {bin(payload[hwOffset+2])[2:].zfill(8)}\n"
+        ret += f"AD 温度 1: {payload[hwOffset+3]:>4d}\n"
+        ret += f"AD 温度 2: {payload[hwOffset+4]:>4d}\n"
+        ret += f"FPGA 温度: {payload[hwOffset+5]:>4d}\n"
+        ret += f"电压监测: {bin(payload[hwOffset+6])[2:].zfill(8)}\n"
+        ret += f"射频温度: {payload[hwOffset+7]:>4d}\n"
+        ret += f"锁定指示: {bin(payload[hwOffset+8])[2:].zfill(8)}\n"
+        ret += f"MGC 1~2: {payload[hwOffset+9] & 0x0f:>2d} - {payload[hwOffset+9] >> 4:>2d}\n"
+        ret += f"MGC 3~4: {payload[hwOffset+10] & 0x0f:>2d} - {payload[hwOffset+10] >> 4:>2d}\n"
+        ret += "--------------------------------\n"
+
+        return ret + '\n' + self.printFrame(data)
+
+    def printFrame(self, data: bytes):
+        ret = ''
+        for i in range(len(data)):
+            ret += f'{data[i]:02X}'
+            ret += '\n' if i%16 == 15 else ' '
+        ret += '\n'
+        return ret
+
+    def evalStatusCheckRsp(self, data: bytes):
+        try:
+            payload = self.structStatusCheckRsp.unpack(data)
+        except :
+            return f"\n### evalStatusCheckRsp:: Failed to unpack data (data length {len(data)} byte).\n"
+
+        ret = "----------- 遥测回令 -----------\n"
+
+        ret += "节点类型: "
+        if payload[1] == 0xDD:
+            ret += f"K频段 (0x{payload[1]:02X})\n"
+        elif payload[1] == 0xEE:
+            ret += f"S频段 (0x{payload[1]:02X})\n"
+        else:
+            ret += f"【未知错误】(0x{payload[1]:02X})\n"
+
+        ret += f"时间戳: {payload[2]/1e5:.2f} ms\n"
+
+        sysbusOffset = 3
+        linkOffset = 7
+        phyOffset = 30
+        hwOffset = 44
+
+        ret += "\n  -- 总线状态\n"
+        ret += f"配置装订:    {payload[sysbusOffset + 0]:04X}\n"
+        ret += f"装置点名计数: {payload[sysbusOffset + 1]:>6d}\n"
+        ret += f"业务下发计数: {payload[sysbusOffset + 2]:>6d}\n"
+        ret += f"遥测请求计数: {payload[sysbusOffset + 3]:>6d}\n"
+
+        ret += "\n  -- 链路层状态\n"
+        ret += f"帧号:   {payload[linkOffset + 0]:>6d}\n"
+        ret += f"时隙号: {payload[linkOffset + 1]:>3d}\n"
+
+        ret += "当前角色: "
+        if payload[linkOffset + 2] == 0xAA:
+            ret += f"反拦截 (0x{payload[linkOffset + 2]:02X})\n"
+        elif payload[linkOffset + 2] == 0xCC:
+            ret += f"拦截 (0x{payload[linkOffset + 2]:02X})\n"
+        else:
+            ret += f"【未知错误】(0x{payload[linkOffset + 2]:02X})\n"
+
+        ret += "网络连接状态: "
+        if payload[linkOffset + 3] == 0x11:
+            ret += f"已连接 (0x{payload[linkOffset + 3]:02X})\n"
+        elif payload[linkOffset + 3] == 0x00:
+            ret += f"未连接 (0x{payload[linkOffset + 3]:02X})\n"
+        else:
+            ret += f"【未知错误】(0x{payload[linkOffset + 3]:02X})\n"
+
+        ret += "网络运行阶段: "
+        if payload[linkOffset + 4] == 0x11:
+            ret += f"扫描建网 (0x{payload[linkOffset + 4]:02X})\n"
+        elif payload[linkOffset + 4] == 0x22:
+            ret += f"业务通信 (0x{payload[linkOffset + 4]:02X})\n"
+        else:
+            ret += f"【未知错误】(0x{payload[linkOffset + 4]:02X})\n"
+
+        ret += f"重建/入网计数: {payload[linkOffset + 5]:>6d}\n"
+        ret += f"通信波位号:  {payload[linkOffset + 6]:>2d}\n"
+
+        ret += "通信波束宽度: "
+        if payload[linkOffset + 7] == 0x01:
+            ret += f"120° 宽波束 (0x{payload[linkOffset + 7]:02X})\n"
+        elif payload[linkOffset + 7] == 0x02:
+            ret += f"60° 次波束 (0x{payload[linkOffset + 7]:02X})\n"
+        elif payload[linkOffset + 7] == 0x03:
+            ret += f"25° 次波束 (0x{payload[linkOffset + 7]:02X})\n"
+        elif payload[linkOffset + 7] == 0x04:
+            ret += f"8° 窄波束 (0x{payload[linkOffset + 7]:02X})\n"
+        else:
+            ret += f"【未知错误】(0x{payload[linkOffset + 7]:02X})\n"
+
+        ret += f"离轴角: {payload[linkOffset + 8]*0.1:.2f}°\n"
+        ret += f"偏航角: {payload[linkOffset + 9]*0.1:.2f}°\n"
+        ret += f"基准帧发送计数: {payload[linkOffset + 10]:>6d}\n"
+        ret += f"基准帧接收计数: {payload[linkOffset + 11]:>6d}\n"
+        ret += f"基准帧正确计数: {payload[linkOffset + 12]:>6d}\n"
+        ret += f"双向握手帧发送计数: {payload[linkOffset + 13]:>6d}\n"
+        ret += f"双向握手帧接收计数: {payload[linkOffset + 14]:>6d}\n"
+        ret += f"双向握手帧正确计数: {payload[linkOffset + 15]:>6d}\n"
+        ret += f"业务帧发送计数: {payload[linkOffset + 16]:>6d}\n"
+        ret += f"业务帧接收计数: {payload[linkOffset + 17]:>6d}\n"
+        ret += f"业务帧正确计数: {payload[linkOffset + 18]:>6d}\n"
+        ret += f"时间偏差记录: {payload[linkOffset + 19]/1e2:.2f} us\n"
+        ret += f"发送数据 ID: {payload[linkOffset + 20]:>6d}\n"
+        ret += f"接收数据 ID: {payload[linkOffset + 21]:>6d}\n"
+
+        ret += "\n  -- 物理层状态\n"
+        ret += f"捕获计数:    {payload[phyOffset + 0]:>6d}\n"
+        ret += f"帧同步计数:  {payload[phyOffset + 1]:>6d}\n"
+        ret += f"译码计数:    {payload[phyOffset + 2]:>6d}\n"
+        ret += f"CRC 正确计数:{payload[phyOffset + 3]:>6d}\n"
+        ret += f"多普勒估计:  {payload[phyOffset + 4]:.2f} Hz\n"
+        ret += f"正确接收时刻: {payload[phyOffset + 5]/1e2:.2f} us\n"
+        ret += f"捕获峰均比:  {payload[phyOffset + 6]:.2f}\n"
+        ret += f"捕获相位值:  {payload[phyOffset + 7]:>3d}\n"
+        ret += f"捕获频偏通道: {payload[phyOffset + 8]:>3d}\n"
+        ret += f"帧同步峰均比:   {payload[phyOffset + 9]:.2f}\n"
+        ret += f"帧同步频偏通道: {payload[phyOffset + 10]:>3d}\n"
+        ret += f"交织输入数据幅度统计:\t0x{payload[phyOffset + 11]:04X}\n"
+        ret += "天线工作模式: "
+        if payload[phyOffset + 12] == 0x01:
+            ret += f"静默模式 (0x{payload[phyOffset + 12]:02X})\n"
+        elif payload[phyOffset + 12] == 0x02:
+            ret += f"低功率模式 (0x{payload[phyOffset + 12]:02X})\n"
+        elif payload[phyOffset + 12] == 0x03:
+            ret += f"全功率模式 (0x{payload[phyOffset + 12]:02X})\n"
+        else:
+            ret += f"【未知错误】(0x{payload[phyOffset + 12]:02X})\n"
+
+        ret += "\n  -- 硬件状态\n"
+        ret += f"FPGA 电压监测: {bin(payload[hwOffset+0])[2:].zfill(8)}\n"
+        ret += f"时钟锁定状态:   {bin(payload[hwOffset+1])[2:].zfill(8)}\n"
+        ret += f"AD 锁定状态:   {bin(payload[hwOffset+2])[2:].zfill(8)}\n"
+        ret += f"AD 温度 1: {payload[hwOffset+3]:>4d}\n"
+        ret += f"AD 温度 2: {payload[hwOffset+4]:>4d}\n"
+        ret += f"FPGA 温度: {payload[hwOffset+5]:>4d}\n"
+        ret += f"电压监测: {bin(payload[hwOffset+6])[2:].zfill(8)}\n"
+        ret += f"射频温度: {payload[hwOffset+7]:>4d}\n"
+        ret += f"锁定指示: {bin(payload[hwOffset+8])[2:].zfill(8)}\n"
+        ret += f"MGC 1~2: {payload[hwOffset+9] & 0x0f:>2d} - {payload[hwOffset+9] >> 4:>2d}\n"
+        ret += f"MGC 3~4: {payload[hwOffset+10] & 0x0f:>2d} - {payload[hwOffset+10] >> 4:>2d}\n"
+
+        ret += "--------------------------------\n"
+        return ret + '\n' + self.printFrame(data)
+
+    def onSent(self, ok, msg, length, path):
+        if ok:
+            self.statusBar.addTx(length)
+        else:
+            self.hintSignal.emit("error", _("Error"), _("Send data failed!") + " " + msg)
+
+    def sendCustomItem(self, item):
+        data = item["data"]
+        dateBytes = self.parseSendData(data, encoding = self.configGlobal["encoding"], isHexStr = True)
+        if dateBytes:
+            self.send(dateBytes, callback=self.onSent)
@@ -359,20 +359,20 @@
 /* Definitions for driver GPIO */
 #define XPAR_XGPIO_NUM_INSTANCES 1

-/* Definitions for peripheral CONFIG_GPIO */
-#define XPAR_CONFIG_GPIO_BASEADDR 0x41200000
-#define XPAR_CONFIG_GPIO_HIGHADDR 0x4120FFFF
-#define XPAR_CONFIG_GPIO_DEVICE_ID 0
-#define XPAR_CONFIG_GPIO_INTERRUPT_PRESENT 0
-#define XPAR_CONFIG_GPIO_IS_DUAL 1
+/* Definitions for peripheral MPC_GPIO */
+#define XPAR_MPC_GPIO_BASEADDR 0x41200000
+#define XPAR_MPC_GPIO_HIGHADDR 0x4120FFFF
+#define XPAR_MPC_GPIO_DEVICE_ID 0
+#define XPAR_MPC_GPIO_INTERRUPT_PRESENT 0
+#define XPAR_MPC_GPIO_IS_DUAL 1


 /******************************************************************/

-/* Canonical definitions for peripheral CONFIG_GPIO */
+/* Canonical definitions for peripheral MPC_GPIO */
 #define XPAR_GPIO_0_BASEADDR 0x41200000
 #define XPAR_GPIO_0_HIGHADDR 0x4120FFFF
-#define XPAR_GPIO_0_DEVICE_ID XPAR_CONFIG_GPIO_DEVICE_ID
+#define XPAR_GPIO_0_DEVICE_ID XPAR_MPC_GPIO_DEVICE_ID
 #define XPAR_GPIO_0_INTERRUPT_PRESENT 0
 #define XPAR_GPIO_0_IS_DUAL 1

@@ -425,17 +425,14 @@

 /* Definitions for Fabric interrupts connected to ps7_scugic_0 */
 #define XPAR_FABRIC_PHY_IRQ_INTR 61U
-#define XPAR_FABRIC_FRAME_UART_0_RX_INTR_INTR 62U
-#define XPAR_FABRIC_FRAME_UART_0_TX_INTR_INTR 63U
-#define XPAR_FABRIC_MPC_IRQ_INTR 64U
-#define XPAR_FABRIC_PHY_5MS_INTR 65U
-#define XPAR_FABRIC_PHY_5MS_DELAY_2MS_INTR 66U
+#define XPAR_FABRIC_PHY_5MS_INTR 62U
+#define XPAR_FABRIC_PHY_5MS_DELAY_2MS_INTR 63U
+#define XPAR_FABRIC_MPC_RX_IRQ_INTR 64U
+#define XPAR_FABRIC_MPC_TX_IRQ_INTR 65U

 /******************************************************************/

 /* Canonical definitions for Fabric interrupts connected to ps7_scugic_0 */
-#define XPAR_FABRIC_FRAME_UART_0_RX_INTR_VEC_ID XPAR_FABRIC_FRAME_UART_0_RX_INTR_INTR
-#define XPAR_FABRIC_FRAME_UART_0_TX_INTR_VEC_ID XPAR_FABRIC_FRAME_UART_0_TX_INTR_INTR

 /******************************************************************/

@@ -43,10 +43,10 @@
 XGpio_Config XGpio_ConfigTable[XPAR_XGPIO_NUM_INSTANCES] =
 {
 	{
-		XPAR_CONFIG_GPIO_DEVICE_ID,
-		XPAR_CONFIG_GPIO_BASEADDR,
-		XPAR_CONFIG_GPIO_INTERRUPT_PRESENT,
-		XPAR_CONFIG_GPIO_IS_DUAL
+		XPAR_MPC_GPIO_DEVICE_ID,
+		XPAR_MPC_GPIO_BASEADDR,
+		XPAR_MPC_GPIO_INTERRUPT_PRESENT,
+		XPAR_MPC_GPIO_IS_DUAL
 	}
 };

@@ -18,18 +18,6 @@ BEGIN PROCESSOR
 END


-BEGIN DRIVER
- PARAMETER DRIVER_NAME = frame_uart
- PARAMETER DRIVER_VER = 1.0
- PARAMETER HW_INSTANCE = Frame_Uart_0
-END
-
-BEGIN DRIVER
- PARAMETER DRIVER_NAME = gpio
- PARAMETER DRIVER_VER = 4.4
- PARAMETER HW_INSTANCE = config_gpio
-END
-
 BEGIN DRIVER
 PARAMETER DRIVER_NAME = generic
 PARAMETER DRIVER_VER = 2.0
@@ -54,6 +42,12 @@ BEGIN DRIVER
 PARAMETER HW_INSTANCE = mpc_bram_interface_mpc_bram_ctrl
 END

+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = gpio
+ PARAMETER DRIVER_VER = 4.4
+ PARAMETER HW_INSTANCE = mpc_gpio
+END
+
 BEGIN DRIVER
 PARAMETER DRIVER_NAME = bram
 PARAMETER DRIVER_VER = 4.3
@@ -13,7 +13,7 @@ RM := rm -rf
 -include sources.mk
 -include src/util/subdir.mk
 -include src/time_ctrl/subdir.mk
-include src/systembus/subdir.mk
+-include src/mpc/subdir.mk
 -include src/networking/phy_layer/subdir.mk
 -include src/networking/link_layer/geometry/subdir.mk
 -include src/networking/link_layer/subdir.mk
@@ -23,7 +23,7 @@ C_DEPS += \
 src/dev_profile/%.o: ../src/dev_profile/%.c
 	@echo 'Building file: $<'
 	@echo 'Invoking: ARM v7 gcc compiler'
-	$(CC) -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
+	$(CC) -std=c17 -pedantic -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
 	@echo 'Finished building: $<'
 	@echo ' '

@@ -4,23 +4,23 @@

 # Add inputs and outputs from these tool invocations to the build variables
 C_SRCS += \
-../src/systembus/systembus.c \
-../src/systembus/systembus_uart.c 
+../src/mpc/mpc.c \
+../src/mpc/mpc_hw.c

 OBJS += \
-./src/systembus/systembus.o \
-./src/systembus/systembus_uart.o 
+./src/mpc/mpc.o \
+./src/mpc/mpc_hw.o

 C_DEPS += \
-./src/systembus/systembus.d \
-./src/systembus/systembus_uart.d 
+./src/mpc/mpc.d \
+./src/mpc/mpc_hw.d


 # Each subdirectory must supply rules for building sources it contributes
 src/systembus/%.o: ../src/systembus/%.c
 	@echo 'Building file: $<'
 	@echo 'Invoking: ARM v7 gcc compiler'
-	$(CC) -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
+	$(CC) -std=c17 -pedantic -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
 	@echo 'Finished building: $<'
 	@echo ' '

@@ -23,7 +23,7 @@ C_DEPS += \
 src/networking/link_layer/geometry/%.o: ../src/networking/link_layer/geometry/%.c
 	@echo 'Building file: $<'
 	@echo 'Invoking: ARM v7 gcc compiler'
-	$(CC) -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
+	$(CC) -std=c17 -pedantic -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
 	@echo 'Finished building: $<'
 	@echo ' '

@@ -38,7 +38,7 @@ C_DEPS += \
 src/networking/link_layer/%.o: ../src/networking/link_layer/%.c
 	@echo 'Building file: $<'
 	@echo 'Invoking: ARM v7 gcc compiler'
-	$(CC) -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
+	$(CC) -std=c17 -pedantic -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
 	@echo 'Finished building: $<'
 	@echo ' '

@@ -20,7 +20,7 @@ C_DEPS += \
 src/networking/phy_layer/%.o: ../src/networking/phy_layer/%.c
 	@echo 'Building file: $<'
 	@echo 'Invoking: ARM v7 gcc compiler'
-	$(CC) -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
+	$(CC) -std=c17 -pedantic -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
 	@echo 'Finished building: $<'
 	@echo ' '

@@ -23,7 +23,7 @@ C_DEPS += \
 src/%.o: ../src/%.c
 	@echo 'Building file: $<'
 	@echo 'Invoking: ARM v7 gcc compiler'
-	$(CC) -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
+	$(CC) -std=c17 -pedantic -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
 	@echo 'Finished building: $<'
 	@echo ' '

@@ -17,7 +17,7 @@ C_DEPS += \
 src/time_ctrl/%.o: ../src/time_ctrl/%.c
 	@echo 'Building file: $<'
 	@echo 'Invoking: ARM v7 gcc compiler'
-	$(CC) -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
+	$(CC) -std=c17 -pedantic -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
 	@echo 'Finished building: $<'
 	@echo ' '

@@ -32,7 +32,7 @@ C_DEPS += \
 src/util/%.o: ../src/util/%.c
 	@echo 'Building file: $<'
 	@echo 'Invoking: ARM v7 gcc compiler'
-	$(CC) -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
+	$(CC) -std=c17 -pedantic -Wall -O0 -g3 -I../bsp/ps7_cortexa9_0/include -I../src/include -c -fmessage-length=0 -MT"$@" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -o "$@" "$<"
 	@echo 'Finished building: $<'
 	@echo ' '

@@ -1,2 +0,0 @@
-*startfile:
-crti%O%s crtbegin%O%s
@@ -10,18 +10,24 @@
 * History:
 * [2021-04-28]: Initial edition.
 *
- * Copyright(c) 2021 Beijing Institute of Technology.
+ * Copyright(c) 2024 Beijing Institute of Technology.
 * Lab of Communication and Networking
 *
 ******************************************************************************/

-#ifndef CONFIG_H_
-#define CONFIG_H_
-
-#define XILINX_PLATFORM
+#ifndef __APP_CONFIG_H_
+#define __APP_CONFIG_H_

 #include "xparameters.h"

+#ifdef PLATFORM_ZYNQMP // Zynq MPSoC (Zynq UltraScale+)
+#define HSJL_GE
+#elif defined(PLATFORM_ZYNQ)
+#define HSJL_NODE
+#else
+#error Unsupported hardware...
+#endif
+
 /******** Software Version ********/
 #define _APP_VER 0x00010008

@@ -35,34 +41,42 @@
 // 2 - print warnings and errors
 // 1 - print only errors
 // other - print nothing
+
 #define DATALINK_ENABLE_AUTORECONNECT
 #define DATALINK_ENABLE_AUTOTIMESYNC
 // #define DATALINK_ENABLE_BERTEST

-
 /************ Hardware Configs ************/
-#define CPU_CLK_HZ 			XPAR_CPU_CORTEXA9_0_CPU_CLK_FREQ_HZ
-#define GLOBAL_TIMER_CLK_HZ (CPU_CLK_HZ/2)
-#define SCU_TIMER_CLK_HZ 	(CPU_CLK_HZ/2)
+#ifdef HSJL_GE // Zynq MPSoC (Zynq UltraScale+)
+#define CPU_CLK_HZ XPAR_CPU_CORTEXA53_0_CPU_CLK_FREQ_HZ
 #define FCLK_CLK0_HZ 100000000
-
+#define APP_TIMER_CLK_HZ FCLK_CLK0_HZ
+#else // Zynq-7000
+#define CPU_CLK_HZ XPAR_CPU_CORTEXA9_0_CPU_CLK_FREQ_HZ
+#define APP_TIMER_CLK_HZ (CPU_CLK_HZ / 2)
+#define FCLK_CLK0_HZ 100000000
+#endif
 /********* Zynq Platform Configs **********/
-// SCU Timer (for logging)
-#define SCUTIMER_DEVICE_ID XPAR_PS7_SCUTIMER_0_DEVICE_ID
-#define SCUTIMER_INTR_ID XPAR_SCUTIMER_INTR
-
+// APP Timer (for logging)
+#ifdef HSJL_GE // Zynq MPSoC (Zynq UltraScale+)
+#define APPTIMER_DEVICE_ID XPAR_AXI_TIMER_DEVICE_ID
+#define APPTIMER_INTR_ID XPAR_FABRIC_AXI_TIMER_INTERRUPT_INTR
+#else
+#define APPTIMER_DEVICE_ID XPAR_PS7_SCUTIMER_0_DEVICE_ID
+#define APPTIMER_INTR_ID XPAR_SCUTIMER_INTR
+#endif
 // Physical Layer Configs
-#define PHY_DEVICE_ID 0
+#define PHY_DEVICE_ID (0x01 | 0x00)
 #define PHY_BASEADDR XPAR_PHYC_BASEADDR
-#define PHY_BEAM_SET_PRESET
 #define PHY_BEAM_FORMING_ENABLE
 // -- Antenna Bram Configs
-#define PHY_ANTCONFIG_BRAM_DEVICE_ID XPAR_PHY_DATA_INTERFACE_ANT_INFO_BRAM_CTRL_DEVICE_ID
+#define PHY_ANTCONFIG_BRAM_DEVICE_ID XPAR_PHY_DATA_INTERFACE_ANT_CONFIG_BRAM_CTRL_DEVICE_ID
+#define PHY_ANTINFO_BRAM_DEVICE_ID XPAR_PHY_DATA_INTERFACE_ANT_BEAM_BRAM_CTRL_DEVICE_ID
 // -- Buffers
 #define PHY_TXBUFF_BRAM_DEVICE_ID XPAR_PHY_DATA_INTERFACE_TX_FRAME_BRAM_CTRL_DEVICE_ID
 #define PHY_RXBUFF_BRAM_DEVICE_ID XPAR_PHY_DATA_INTERFACE_RX_FRAME_BRAM_CTRL_DEVICE_ID
 // -- Xadc
-#define PHY_HW_XADC_DEVICE_ID XPAR_PS7_XADC_0_DEVICE_ID
+#define PHY_HW_SYSMON_DEVICE_ID XPAR_SYSTEM_MANAGEMENT_DEVICE_ID
 // -- Interrupt id
 #define PHY_INTR_ID XPAR_FABRIC_PHY_IRQ_INTR
 #define PERIODIC_5MS_INTR_ID XPAR_FABRIC_PHY_5MS_DELAY_2MS_INTR
@@ -71,18 +85,202 @@
 #define TIME_CONTROLLER_BASEADDR XPAR_TMC_BASEADDR

 // System Bus Configs
-//#define SYSBUS_BASE_ADDR	XPAR_SYSTEMBUS_BASEADDR
-//#define SYSBUS_TX_INTR_ID	XPAR_FABRIC_SYSTEMBUS_TX_DONE_INTR
-//#define SYSBUS_RX_INTR_ID	XPAR_FABRIC_SYSTEMBUS_RX_DONE_INTR
-
-// Global Timer config
-#define GLOBAL_TIMER_DEVICE_ID	XPAR_GLOBAL_TMR_DEVICE_ID
-#define GLOBAL_TIMER_BASEADDR	XPAR_GLOBAL_TMR_BASEADDR
-#define GLOBAL_TIMER_INTR_ID	XPAR_GLOBAL_TMR_INTR
+#define SYSBUS_BASE_ADDR XPAR_SYSTEMBUS_BASEADDR
+#define SYSBUS_TX_INTR_ID XPAR_FABRIC_SYSTEMBUS_TX_DONE_INTR
+#define SYSBUS_RX_INTR_ID XPAR_FABRIC_SYSTEMBUS_RX_DONE_INTR

 // INTC configis
 #define INTC_DEVICE_ID XPAR_SCUGIC_0_DEVICE_ID

+/********* Hardware Configurations **********/
+#ifdef HSJL_GE // Zynq MPSoC (Zynq UltraScale+)
+#define RFSOC
+#define LMK04828
+//#define LMX2594_ADC
+//#define LMX2594_DAC
+#define RFDC_DEVICE_ID 	XPAR_XRFDC_0_DEVICE_ID
+#else
+#define AD9361_REG
+//#define AD9361_API
+#define AD9528
+//#define AD9653
+//#define AD9694
+#endif
+
+// AD9361 Configuration
+#define SPI_INTERFACE_SPI_ENGINE
+#define HAVE_SPLIT_GAIN_TABLE 1 /* only set to 0 in case split_gain_table_mode_enable = 0*/
+#define HAVE_TDD_SYNTH_TABLE 1	/* only set to 0 in case split_gain_table_mode_enable = 0*/
+#define AD9361_DEVICE 1			/* set it 1 if AD9361 device is used, 0 otherwise */
+#define AD9364_DEVICE 0			/* set it 1 if AD9364 device is used, 0 otherwise */
+#define AD9363A_DEVICE 0		/* set it 1 if AD9363A device is used, 0 otherwise */
+#define HAVE_VERBOSE_MESSAGES	/* Recommended during development prints errors and warnings */
+// #define HAVE_DEBUG_MESSAGES /* For Debug purposes only */
+// AD9361 GPIO Configurations
+#define AD9361_GPIO_DEVICE_ID 0
+#define AD9361_GPIO_OFFSET 54
+#define AD9361_GPIO_INPUT 0
+#define AD9361_GPIO_OUTPUT 1
+#define AD9361_GPIO_DISABLE 0
+#define AD9361_GPIO_ENABLE 1
+// -- AD9361-1 SPI Engine Configuration
+#define AD9361_SPI_DEVICE_ID 0
+#define AD9361_SPI_ENGINE_REF_CLK FCLK_CLK0_HZ
+#define AD9361_SPI_ENGINE_MAX_SPEED 5000000
+#define AD9361_SPI_ENGINE_BASEADDR XPAR_AXI_SPI_ENGINE_AXI_SPI_ENGINE_BASEADDR
+#define AD9361_SPI_ENGINE_DATA_WIDTH 8
+#define AD9361_SPI_ENGINE_CS_DELAY 3
+#define AD9361_TIMEOUT_TH 2000
+#define AD9361_1_SPI_CS 0x01
+#define AD9361_2_SPI_CS 0x02
+#define AD9361_2_TIMEOUT_TH 2000
+// -- AD9361-1 GPIO
+#define AD9361_1_TXNRX (AD9361_GPIO_OFFSET + 6)
+#define AD9361_1_ENABLE (AD9361_GPIO_OFFSET + 7)
+#define AD9361_1_EN_AGC (AD9361_GPIO_OFFSET + 8)
+#define AD9361_1_RESET_B (AD9361_GPIO_OFFSET + 9)
+#define AD9361_1_CTRL_OUT0 (AD9361_GPIO_OFFSET + 10)
+#define AD9361_1_CTRL_OUT1 (AD9361_GPIO_OFFSET + 11)
+#define AD9361_1_CTRL_OUT2 (AD9361_GPIO_OFFSET + 12)
+#define AD9361_1_CTRL_OUT3 (AD9361_GPIO_OFFSET + 13)
+#define AD9361_1_CTRL_OUT4 (AD9361_GPIO_OFFSET + 14)
+#define AD9361_1_CTRL_OUT5 (AD9361_GPIO_OFFSET + 15)
+#define AD9361_1_CTRL_OUT6 (AD9361_GPIO_OFFSET + 16)
+#define AD9361_1_CTRL_OUT7 (AD9361_GPIO_OFFSET + 17)
+#define AD9361_1_CTRL_IN0 (AD9361_GPIO_OFFSET + 18)
+#define AD9361_1_CTRL_IN1 (AD9361_GPIO_OFFSET + 19)
+#define AD9361_1_CTRL_IN2 (AD9361_GPIO_OFFSET + 20)
+#define AD9361_1_CTRL_IN3 (AD9361_GPIO_OFFSET + 21)
+// -- AD9361-2 GPIO
+#define AD9361_2_TXNRX (AD9361_GPIO_OFFSET + 22)
+#define AD9361_2_ENABLE (AD9361_GPIO_OFFSET + 23)
+#define AD9361_2_EN_AGC (AD9361_GPIO_OFFSET + 24)
+#define AD9361_2_RESET_B (AD9361_GPIO_OFFSET + 25)
+#define AD9361_2_CTRL_OUT0 (AD9361_GPIO_OFFSET + 26)
+#define AD9361_2_CTRL_OUT1 (AD9361_GPIO_OFFSET + 27)
+#define AD9361_2_CTRL_OUT2 (AD9361_GPIO_OFFSET + 28)
+#define AD9361_2_CTRL_OUT3 (AD9361_GPIO_OFFSET + 29)
+#define AD9361_2_CTRL_OUT4 (AD9361_GPIO_OFFSET + 30)
+#define AD9361_2_CTRL_OUT5 (AD9361_GPIO_OFFSET + 31)
+#define AD9361_2_CTRL_OUT6 (AD9361_GPIO_OFFSET + 32)
+#define AD9361_2_CTRL_OUT7 (AD9361_GPIO_OFFSET + 33)
+#define AD9361_2_CTRL_IN0 (AD9361_GPIO_OFFSET + 34)
+#define AD9361_2_CTRL_IN1 (AD9361_GPIO_OFFSET + 35)
+#define AD9361_2_CTRL_IN2 (AD9361_GPIO_OFFSET + 36)
+#define AD9361_2_CTRL_IN3 (AD9361_GPIO_OFFSET + 37)
+// AD9361-Status Code
+#define AD9361_SYNC (AD9361_GPIO_OFFSET + 38)
+#define AD9361_RX_FIFO_RST (AD9361_GPIO_OFFSET + 39)
+#define AD9361_1_CAL_START (AD9361_GPIO_OFFSET + 40)
+#define AD9361_2_CAL_START (AD9361_GPIO_OFFSET + 41)
+#define AD9361_RECAL (AD9361_GPIO_OFFSET + 42)
+#define AD9361_TX_SWITCH (AD9361_GPIO_OFFSET + 43)
+#define AD9361_1_CAL_DONE (AD9361_GPIO_OFFSET + 44)
+#define AD9361_2_CAL_DONE (AD9361_GPIO_OFFSET + 45)
+#define AD9361_CAL_RESULT (AD9361_GPIO_OFFSET + 46)
+
+typedef enum
+{
+	TX_FREQ_125,
+	TX_FREQ_126,
+	TX_FREQ_4125
+} ad9361TxFreq;
+
+// HMC7044 Configurations
+#define HMC7044_GPIO_DEVICE_ID 0
+#define HMC7044_GPIO_OFFSET 54
+#define HMC7044_RESET (HMC7044_GPIO_OFFSET + 0)
+#define HMC7044_SYNC (HMC7044_GPIO_OFFSET + 1)
+#define HMC7044_GPIO_0 (HMC7044_GPIO_OFFSET + 2)
+#define HMC7044_GPIO_1 (HMC7044_GPIO_OFFSET + 3)
+#define HMC7044_GPIO_2 (HMC7044_GPIO_OFFSET + 4)
+#define HMC7044_GPIO_3 (HMC7044_GPIO_OFFSET + 5)
+// -- HMC7044 SPI Engine Configuration
+#define HMC7044_SPI_DEVICE_ID 0
+#define HMC7044_SPI_ENGINE_REF_CLK FCLK_CLK0_HZ
+#define HMC7044_SPI_ENGINE_MAX_SPEED 5000000
+#define HMC7044_SPI_ENGINE_BASEADDR XPAR_AXI_SPI_ENGINE_AXI_SPI_ENGINE_BASEADDR
+#define HMC7044_SPI_ENGINE_DATA_WIDTH 8
+#define HMC7044_SPI_ENGINE_CS_DELAY 3
+#define HMC7044_SPI_CS_HMC7044 0x00
+
+// AD9528 Configurations
+#define AD9528_GPIO_DEVICE_ID 0
+#define AD9528_GPIO_OFFSET 54
+#define AD9528_RESETB (AD9528_GPIO_OFFSET+0)
+#define AD9528_SYSREF_REQ (AD9528_GPIO_OFFSET+1)
+#define AD9528_STATUS_0 (AD9528_GPIO_OFFSET+2)
+#define AD9528_STATUS_1 (AD9528_GPIO_OFFSET+3)
+// -- AD9528 SPI Engine Configuration
+#define AD9528_SPI_DEVICE_ID 0
+#define AD9528_SPI_ENGINE_REF_CLK FCLK_CLK0_HZ
+#define AD9528_SPI_ENGINE_MAX_SPEED 5000000
+#define AD9528_SPI_ENGINE_BASEADDR XPAR_AXI_SPI_ENGINE_AXI_SPI_ENGINE_BASEADDR
+#define AD9528_SPI_ENGINE_DATA_WIDTH 8
+#define AD9528_SPI_ENGINE_CS_DELAY 3
+#define AD9528_SPI_CS 0x00
+
+// LMK04828 Configurations
+#define LMK04828_GPIO_DEVICE_ID 0
+#define LMK04828_GPIO_OFFSET 54
+// -- LMK04828 SPI Engine Configuration
+#define LMK04828_SPI_DEVICE_ID 0
+#define LMK04828_SPI_ENGINE_REF_CLK FCLK_CLK0_HZ
+#define LMK04828_SPI_ENGINE_MAX_SPEED 5000000
+#define LMK04828_SPI_ENGINE_BASEADDR XPAR_AXI_SPI_ENGINE_AXI_SPI_ENGINE_BASEADDR
+#define LMK04828_SPI_ENGINE_DATA_WIDTH 8
+#define LMK04828_SPI_ENGINE_CS_DELAY 3
+#define LMK04828_SPI_CS 0x00
+
+// LMX2594_ADC Configurations
+#define LMX2594_ADC_GPIO_DEVICE_ID 0
+#define LMX2594_ADC_GPIO_OFFSET 54
+// -- LMX2594_ADC SPI Engine Configuration
+#define LMX2594_ADC_SPI_DEVICE_ID 0
+#define LMX2594_ADC_SPI_ENGINE_REF_CLK FCLK_CLK0_HZ
+#define LMX2594_ADC_SPI_ENGINE_MAX_SPEED 5000000
+#define LMX2594_ADC_SPI_ENGINE_BASEADDR XPAR_AXI_SPI_ENGINE_AXI_SPI_ENGINE_BASEADDR
+#define LMX2594_ADC_SPI_ENGINE_DATA_WIDTH 8
+#define LMX2594_ADC_SPI_ENGINE_CS_DELAY 3
+#define LMX2594_ADC_SPI_CS 0x01
+
+// LMX2594_DAC Configurations
+#define LMX2594_DAC_GPIO_DEVICE_ID 0
+#define LMX2594_DAC_GPIO_OFFSET 54
+// -- LMX2594_DAC SPI Engine Configuration
+#define LMX2594_DAC_SPI_DEVICE_ID 0
+#define LMX2594_DAC_SPI_ENGINE_REF_CLK FCLK_CLK0_HZ
+#define LMX2594_DAC_SPI_ENGINE_MAX_SPEED 5000000
+#define LMX2594_DAC_SPI_ENGINE_BASEADDR XPAR_AXI_SPI_ENGINE_AXI_SPI_ENGINE_BASEADDR
+#define LMX2594_DAC_SPI_ENGINE_DATA_WIDTH 8
+#define LMX2594_DAC_SPI_ENGINE_CS_DELAY 3
+#define LMX2594_DAC_SPI_CS 0x02
+
+// AD9653 Configurations
+#define AD9653_GPIO_DEVICE_ID 0
+#define AD9653_GPIO_OFFSET 54
+#define AD9653_POWR_DOWN (AD9653_GPIO_OFFSET+0)
+// -- AD9653 SPI Engine Configuration
+#define AD9653_SPI_DEVICE_ID 0
+#define AD9653_SPI_ENGINE_REF_CLK FCLK_CLK0_HZ
+#define AD9653_SPI_ENGINE_MAX_SPEED 5000000
+#define AD9653_SPI_ENGINE_BASEADDR XPAR_AXI_SPI_ENGINE_AXI_SPI_ENGINE_BASEADDR
+#define AD9653_SPI_ENGINE_DATA_WIDTH 8
+#define AD9653_SPI_ENGINE_CS_DELAY 3
+#define AD9653_SPI_CS 0x03
+
+// AD9694 Configurations
+#define AD9694_GPIO_DEVICE_ID 0
+#define AD9694_GPIO_OFFSET 54
+// -- AD9694 SPI Engine Configuration
+#define AD9694_SPI_DEVICE_ID 0
+#define AD9694_SPI_ENGINE_REF_CLK FCLK_CLK0_HZ
+#define AD9694_SPI_ENGINE_MAX_SPEED 5000000
+#define AD9694_SPI_ENGINE_BASEADDR XPAR_AXI_SPI_ENGINE_AXI_SPI_ENGINE_BASEADDR
+#define AD9694_SPI_ENGINE_DATA_WIDTH 8
+#define AD9694_SPI_ENGINE_CS_DELAY 3
+#define AD9694_SPI_CS 0x03
+
 // Configuration Check
 #if defined(PHY_BEAM_SET_PRESET) && !defined(PHY_BEAM_FORMING_ENABLE)
 #define PHY_BEAM_FORMING_ENABLE
@@ -93,9 +291,6 @@
 #if !defined(DATALINK_ENABLE_AUTOTIMESYNC)
 #warning To enbale bit error rate test, auto time-sync should be enabled...
 #endif
-#if defined(DATALINK_ENABLE_AUTORECONNECT)
-	#error Do not support auto reconnnect in bit error rate test mode...
-#endif
 #endif

-#endif
+#endif //__APP_CONFIG_H_
@@ -1,110 +0,0 @@
-/******************************************************************************
-*
-* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
-*
-* Permission is hereby granted, free of charge, to any person obtaining a copy
-* of this software and associated documentation files (the "Software"), to deal
-* in the Software without restriction, including without limitation the rights
-* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-* copies of the Software, and to permit persons to whom the Software is
-* furnished to do so, subject to the following conditions:
-*
-* The above copyright notice and this permission notice shall be included in
-* all copies or substantial portions of the Software.
-*
-* Use of the Software is limited solely to applications:
-* (a) running on a Xilinx device, or
-* (b) that interact with a Xilinx device through a bus or interconnect.
-*
-* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
-* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
-* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-* SOFTWARE.
-*
-* Except as contained in this notice, the name of the Xilinx shall not be used
-* in advertising or otherwise to promote the sale, use or other dealings in
-* this Software without prior written authorization from Xilinx.
-*
-******************************************************************************/
-
-#include "xparameters.h"
-#include "xil_cache.h"
-#include "platform_config.h"
-
-/*
- * Uncomment one of the following two lines, depending on the target,
- * if ps7/psu init source files are added in the source directory for
- * compiling example outside of SDK.
- */
-/*#include "ps7_init.h"*/
-/*#include "psu_init.h"*/
-
-#ifdef STDOUT_IS_16550
- #include "xuartns550_l.h"
-
- #define UART_BAUD 9600
-#endif
-
-void
-enable_caches()
-{
-#ifdef __PPC__
-    Xil_ICacheEnableRegion(CACHEABLE_REGION_MASK);
-    Xil_DCacheEnableRegion(CACHEABLE_REGION_MASK);
-#elif __MICROBLAZE__
-#ifdef XPAR_MICROBLAZE_USE_ICACHE
-    Xil_ICacheEnable();
-#endif
-#ifdef XPAR_MICROBLAZE_USE_DCACHE
-    Xil_DCacheEnable();
-#endif
-#endif
-}
-
-void
-disable_caches()
-{
-#ifdef __MICROBLAZE__
-#ifdef XPAR_MICROBLAZE_USE_DCACHE
-    Xil_DCacheDisable();
-#endif
-#ifdef XPAR_MICROBLAZE_USE_ICACHE
-    Xil_ICacheDisable();
-#endif
-#endif
-}
-
-void
-init_uart()
-{
-#ifdef STDOUT_IS_16550
-    XUartNs550_SetBaud(STDOUT_BASEADDR, XPAR_XUARTNS550_CLOCK_HZ, UART_BAUD);
-    XUartNs550_SetLineControlReg(STDOUT_BASEADDR, XUN_LCR_8_DATA_BITS);
-#endif
-    /* Bootrom/BSP configures PS7/PSU UART to 115200 bps */
-}
-
-void
-init_platform()
-{
-    /*
-     * If you want to run this example outside of SDK,
-     * uncomment one of the following two lines and also #include "ps7_init.h"
-     * or #include "ps7_init.h" at the top, depending on the target.
-     * Make sure that the ps7/psu_init.c and ps7/psu_init.h files are included
-     * along with this example source files for compilation.
-     */
-    /* ps7_init();*/
-    /* psu_init();*/
-    enable_caches();
-    init_uart();
-}
-
-void
-cleanup_platform()
-{
-    disable_caches();
-}
@@ -1,41 +0,0 @@
-/******************************************************************************
-*
-* Copyright (C) 2008 - 2014 Xilinx, Inc.  All rights reserved.
-*
-* Permission is hereby granted, free of charge, to any person obtaining a copy
-* of this software and associated documentation files (the "Software"), to deal
-* in the Software without restriction, including without limitation the rights
-* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-* copies of the Software, and to permit persons to whom the Software is
-* furnished to do so, subject to the following conditions:
-*
-* The above copyright notice and this permission notice shall be included in
-* all copies or substantial portions of the Software.
-*
-* Use of the Software is limited solely to applications:
-* (a) running on a Xilinx device, or
-* (b) that interact with a Xilinx device through a bus or interconnect.
-*
-* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
-* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
-* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-* SOFTWARE.
-*
-* Except as contained in this notice, the name of the Xilinx shall not be used
-* in advertising or otherwise to promote the sale, use or other dealings in
-* this Software without prior written authorization from Xilinx.
-*
-******************************************************************************/
-
-#ifndef __PLATFORM_H_
-#define __PLATFORM_H_
-
-#include "platform_config.h"
-
-void init_platform();
-void cleanup_platform();
-
-#endif
@@ -1,7 +0,0 @@
-#ifndef __PLATFORM_CONFIG_H_
-#define __PLATFORM_CONFIG_H_
-
-#define STDOUT_IS_PS7_UART
-#define UART_DEVICE_ID 0
-
-#endif
@@ -0,0 +1,340 @@
+#include "dev_profile.h"
+#include "../config/app_config.h"
+#include "../drivers/rf-transceiver/ad9361/ad9361_api.h"
+#include "../drivers/axi_core/spi_engine/spi_engine.h"
+#include "../drivers/platform/xilinx_gpio.h"
+
+struct spi_engine_init_param spi_engine_param = {
+	.ref_clk_hz = AD9361_SPI_ENGINE_REF_CLK,
+	.type = SPI_ENGINE,
+	.spi_engine_baseaddr = AD9361_SPI_ENGINE_BASEADDR,
+	.cs_delay = AD9361_SPI_ENGINE_CS_DELAY,
+	.data_width = AD9361_SPI_ENGINE_DATA_WIDTH
+};
+
+struct xil_gpio_init_param xil_gpio_param = {
+	.type = GPIO_PS,
+	.device_id = AD9361_GPIO_DEVICE_ID
+};
+
+AD9361_InitParam ad9361_default_init_param = {
+	/* Device selection */
+	ID_AD9361,	// dev_sel
+	/* Reference Clock */
+	48000000UL,	//reference_clk_rate
+	/* Base Configuration */
+	1,		//two_rx_two_tx_mode_enable *** adi,2rx-2tx-mode-enable
+	1,		//one_rx_one_tx_mode_use_rx_num *** adi,1rx-1tx-mode-use-rx-num
+	1,		//one_rx_one_tx_mode_use_tx_num *** adi,1rx-1tx-mode-use-tx-num
+	1,		//frequency_division_duplex_mode_enable *** adi,frequency-division-duplex-mode-enable
+	0,		//frequency_division_duplex_independent_mode_enable *** adi,frequency-division-duplex-independent-mode-enable
+	0,		//tdd_use_dual_synth_mode_enable *** adi,tdd-use-dual-synth-mode-enable
+	0,		//tdd_skip_vco_cal_enable *** adi,tdd-skip-vco-cal-enable
+	0,		//tx_fastlock_delay_ns *** adi,tx-fastlock-delay-ns
+	0,		//rx_fastlock_delay_ns *** adi,rx-fastlock-delay-ns
+	0,		//rx_fastlock_pincontrol_enable *** adi,rx-fastlock-pincontrol-enable
+	0,		//tx_fastlock_pincontrol_enable *** adi,tx-fastlock-pincontrol-enable
+	0,		//external_rx_lo_enable *** adi,external-rx-lo-enable
+	0,		//external_tx_lo_enable *** adi,external-tx-lo-enable
+	5,		//dc_offset_tracking_update_event_mask *** adi,dc-offset-tracking-update-event-mask
+	6,		//dc_offset_attenuation_high_range *** adi,dc-offset-attenuation-high-range
+	5,		//dc_offset_attenuation_low_range *** adi,dc-offset-attenuation-low-range
+	0x28,	//dc_offset_count_high_range *** adi,dc-offset-count-high-range
+	0x32,	//dc_offset_count_low_range *** adi,dc-offset-count-low-range
+	0,		//split_gain_table_mode_enable *** adi,split-gain-table-mode-enable
+	MAX_SYNTH_FREF,	//trx_synthesizer_target_fref_overwrite_hz *** adi,trx-synthesizer-target-fref-overwrite-hz
+	0,		// qec_tracking_slow_mode_enable *** adi,qec-tracking-slow-mode-enable
+	/* ENSM Control */
+	0,		//ensm_enable_pin_pulse_mode_enable *** adi,ensm-enable-pin-pulse-mode-enable
+	0,		//ensm_enable_txnrx_control_enable *** adi,ensm-enable-txnrx-control-enable
+	/* LO Control */
+	4125000000UL,	//rx_synthesizer_frequency_hz *** adi,rx-synthesizer-frequency-hz
+	4126000000UL,	//tx_synthesizer_frequency_hz *** adi,tx-synthesizer-frequency-hz
+	1,				//tx_lo_powerdown_managed_enable *** adi,tx-lo-powerdown-managed-enable
+	/* Rate & BW Control */
+	{768000000, 192000000, 96000000, 48000000, 24000000, 24000000},// rx_path_clock_frequencies[6] *** adi,rx-path-clock-frequencies
+	{768000000, 192000000, 96000000, 48000000, 24000000, 24000000},// tx_path_clock_frequencies[6] *** adi,tx-path-clock-frequencies
+	18000000,//rf_rx_bandwidth_hz *** adi,rf-rx-bandwidth-hz
+	18000000,//rf_tx_bandwidth_hz *** adi,rf-tx-bandwidth-hz
+	/* RF Port Control */
+	0,		//rx_rf_port_input_select *** adi,rx-rf-port-input-select
+	0,		//tx_rf_port_input_select *** adi,tx-rf-port-input-select
+	/* TX Attenuation Control */
+	10000,	//tx_attenuation_mdB *** adi,tx-attenuation-mdB
+	0,		//update_tx_gain_in_alert_enable *** adi,update-tx-gain-in-alert-enable
+	/* Reference Clock Control */
+	0,		//xo_disable_use_ext_refclk_enable *** adi,xo-disable-use-ext-refclk-enable
+	{8, 5920},	//dcxo_coarse_and_fine_tune[2] *** adi,dcxo-coarse-and-fine-tune
+	CLKOUT_DISABLE,	//clk_output_mode_select *** adi,clk-output-mode-select
+	/* Gain Control */
+	2,		//gc_rx1_mode *** adi,gc-rx1-mode
+	2,		//gc_rx2_mode *** adi,gc-rx2-mode
+	58,		//gc_adc_large_overload_thresh *** adi,gc-adc-large-overload-thresh
+	4,		//gc_adc_ovr_sample_size *** adi,gc-adc-ovr-sample-size
+	47,		//gc_adc_small_overload_thresh *** adi,gc-adc-small-overload-thresh
+	8192,	//gc_dec_pow_measurement_duration *** adi,gc-dec-pow-measurement-duration
+	0,		//gc_dig_gain_enable *** adi,gc-dig-gain-enable
+	800,	//gc_lmt_overload_high_thresh *** adi,gc-lmt-overload-high-thresh
+	704,	//gc_lmt_overload_low_thresh *** adi,gc-lmt-overload-low-thresh
+	24,		//gc_low_power_thresh *** adi,gc-low-power-thresh
+	15,		//gc_max_dig_gain *** adi,gc-max-dig-gain
+	0,		//gc_use_rx_fir_out_for_dec_pwr_meas_enable *** adi,gc-use-rx-fir-out-for-dec-pwr-meas-enable
+	/* Gain MGC Control */
+	2,		//mgc_dec_gain_step *** adi,mgc-dec-gain-step
+	2,		//mgc_inc_gain_step *** adi,mgc-inc-gain-step
+	0,		//mgc_rx1_ctrl_inp_enable *** adi,mgc-rx1-ctrl-inp-enable
+	0,		//mgc_rx2_ctrl_inp_enable *** adi,mgc-rx2-ctrl-inp-enable
+	0,		//mgc_split_table_ctrl_inp_gain_mode *** adi,mgc-split-table-ctrl-inp-gain-mode
+	/* Gain AGC Control */
+	10,		//agc_adc_large_overload_exceed_counter *** adi,agc-adc-large-overload-exceed-counter
+	2,		//agc_adc_large_overload_inc_steps *** adi,agc-adc-large-overload-inc-steps
+	0,		//agc_adc_lmt_small_overload_prevent_gain_inc_enable *** adi,agc-adc-lmt-small-overload-prevent-gain-inc-enable
+	10,		//agc_adc_small_overload_exceed_counter *** adi,agc-adc-small-overload-exceed-counter
+	4,		//agc_dig_gain_step_size *** adi,agc-dig-gain-step-size
+	3,		//agc_dig_saturation_exceed_counter *** adi,agc-dig-saturation-exceed-counter
+	1000,	// agc_gain_update_interval_us *** adi,agc-gain-update-interval-us
+	0,		//agc_immed_gain_change_if_large_adc_overload_enable *** adi,agc-immed-gain-change-if-large-adc-overload-enable
+	0,		//agc_immed_gain_change_if_large_lmt_overload_enable *** adi,agc-immed-gain-change-if-large-lmt-overload-enable
+	10,		//agc_inner_thresh_high *** adi,agc-inner-thresh-high
+	1,		//agc_inner_thresh_high_dec_steps *** adi,agc-inner-thresh-high-dec-steps
+	12,		//agc_inner_thresh_low *** adi,agc-inner-thresh-low
+	1,		//agc_inner_thresh_low_inc_steps *** adi,agc-inner-thresh-low-inc-steps
+	10,		//agc_lmt_overload_large_exceed_counter *** adi,agc-lmt-overload-large-exceed-counter
+	2,		//agc_lmt_overload_large_inc_steps *** adi,agc-lmt-overload-large-inc-steps
+	10,		//agc_lmt_overload_small_exceed_counter *** adi,agc-lmt-overload-small-exceed-counter
+	5,		//agc_outer_thresh_high *** adi,agc-outer-thresh-high
+	2,		//agc_outer_thresh_high_dec_steps *** adi,agc-outer-thresh-high-dec-steps
+	18,		//agc_outer_thresh_low *** adi,agc-outer-thresh-low
+	2,		//agc_outer_thresh_low_inc_steps *** adi,agc-outer-thresh-low-inc-steps
+	1,		//agc_attack_delay_extra_margin_us; *** adi,agc-attack-delay-extra-margin-us
+	0,		//agc_sync_for_gain_counter_enable *** adi,agc-sync-for-gain-counter-enable
+	/* Fast AGC */
+	64,		//fagc_dec_pow_measuremnt_duration ***  adi,fagc-dec-pow-measurement-duration
+	260,	//fagc_state_wait_time_ns ***  adi,fagc-state-wait-time-ns
+	/* Fast AGC - Low Power */
+	0,		//fagc_allow_agc_gain_increase ***  adi,fagc-allow-agc-gain-increase-enable
+	5,		//fagc_lp_thresh_increment_time ***  adi,fagc-lp-thresh-increment-time
+	1,		//fagc_lp_thresh_increment_steps ***  adi,fagc-lp-thresh-increment-steps
+	/* Fast AGC - Lock Level (Lock Level is set via slow AGC inner high threshold) */
+	1,		//fagc_lock_level_lmt_gain_increase_en ***  adi,fagc-lock-level-lmt-gain-increase-enable
+	5,		//fagc_lock_level_gain_increase_upper_limit ***  adi,fagc-lock-level-gain-increase-upper-limit
+	/* Fast AGC - Peak Detectors and Final Settling */
+	1,		//fagc_lpf_final_settling_steps ***  adi,fagc-lpf-final-settling-steps
+	1,		//fagc_lmt_final_settling_steps ***  adi,fagc-lmt-final-settling-steps
+	3,		//fagc_final_overrange_count ***  adi,fagc-final-overrange-count
+	/* Fast AGC - Final Power Test */
+	0,		//fagc_gain_increase_after_gain_lock_en ***  adi,fagc-gain-increase-after-gain-lock-enable
+	/* Fast AGC - Unlocking the Gain */
+	0,		//fagc_gain_index_type_after_exit_rx_mode ***  adi,fagc-gain-index-type-after-exit-rx-mode
+	1,		//fagc_use_last_lock_level_for_set_gain_en ***  adi,fagc-use-last-lock-level-for-set-gain-enable
+	1,		//fagc_rst_gla_stronger_sig_thresh_exceeded_en ***  adi,fagc-rst-gla-stronger-sig-thresh-exceeded-enable
+	5,		//fagc_optimized_gain_offset ***  adi,fagc-optimized-gain-offset
+	10,		//fagc_rst_gla_stronger_sig_thresh_above_ll ***  adi,fagc-rst-gla-stronger-sig-thresh-above-ll
+	1,		//fagc_rst_gla_engergy_lost_sig_thresh_exceeded_en ***  adi,fagc-rst-gla-engergy-lost-sig-thresh-exceeded-enable
+	1,		//fagc_rst_gla_engergy_lost_goto_optim_gain_en ***  adi,fagc-rst-gla-engergy-lost-goto-optim-gain-enable
+	10,		//fagc_rst_gla_engergy_lost_sig_thresh_below_ll ***  adi,fagc-rst-gla-engergy-lost-sig-thresh-below-ll
+	8,		//fagc_energy_lost_stronger_sig_gain_lock_exit_cnt ***  adi,fagc-energy-lost-stronger-sig-gain-lock-exit-cnt
+	1,		//fagc_rst_gla_large_adc_overload_en ***  adi,fagc-rst-gla-large-adc-overload-enable
+	1,		//fagc_rst_gla_large_lmt_overload_en ***  adi,fagc-rst-gla-large-lmt-overload-enable
+	0,		//fagc_rst_gla_en_agc_pulled_high_en ***  adi,fagc-rst-gla-en-agc-pulled-high-enable
+	0,		//fagc_rst_gla_if_en_agc_pulled_high_mode ***  adi,fagc-rst-gla-if-en-agc-pulled-high-mode
+	64,		//fagc_power_measurement_duration_in_state5 ***  adi,fagc-power-measurement-duration-in-state5
+	2,		//fagc_large_overload_inc_steps *** adi,fagc-adc-large-overload-inc-steps
+	/* RSSI Control */
+	1,		//rssi_delay *** adi,rssi-delay
+	1000,	//rssi_duration *** adi,rssi-duration
+	3,		//rssi_restart_mode *** adi,rssi-restart-mode
+	0,		//rssi_unit_is_rx_samples_enable *** adi,rssi-unit-is-rx-samples-enable
+	1,		//rssi_wait *** adi,rssi-wait
+	/* Aux ADC Control */
+	256,	//aux_adc_decimation *** adi,aux-adc-decimation
+	48000000UL,	//aux_adc_rate *** adi,aux-adc-rate
+	/* AuxDAC Control */
+	1,		//aux_dac_manual_mode_enable ***  adi,aux-dac-manual-mode-enable
+	0,		//aux_dac1_default_value_mV ***  adi,aux-dac1-default-value-mV
+	0,		//aux_dac1_active_in_rx_enable ***  adi,aux-dac1-active-in-rx-enable
+	0,		//aux_dac1_active_in_tx_enable ***  adi,aux-dac1-active-in-tx-enable
+	0,		//aux_dac1_active_in_alert_enable ***  adi,aux-dac1-active-in-alert-enable
+	0,		//aux_dac1_rx_delay_us ***  adi,aux-dac1-rx-delay-us
+	0,		//aux_dac1_tx_delay_us ***  adi,aux-dac1-tx-delay-us
+	0,		//aux_dac2_default_value_mV ***  adi,aux-dac2-default-value-mV
+	0,		//aux_dac2_active_in_rx_enable ***  adi,aux-dac2-active-in-rx-enable
+	0,		//aux_dac2_active_in_tx_enable ***  adi,aux-dac2-active-in-tx-enable
+	0,		//aux_dac2_active_in_alert_enable ***  adi,aux-dac2-active-in-alert-enable
+	0,		//aux_dac2_rx_delay_us ***  adi,aux-dac2-rx-delay-us
+	0,		//aux_dac2_tx_delay_us ***  adi,aux-dac2-tx-delay-us
+	/* Temperature Sensor Control */
+	256,	//temp_sense_decimation *** adi,temp-sense-decimation
+	1000,	//temp_sense_measurement_interval_ms *** adi,temp-sense-measurement-interval-ms
+	0xCE,	//temp_sense_offset_signed *** adi,temp-sense-offset-signed
+	1,		//temp_sense_periodic_measurement_enable *** adi,temp-sense-periodic-measurement-enable
+	/* Control Out Setup */
+	0xFF,	//ctrl_outs_enable_mask *** adi,ctrl-outs-enable-mask
+	0,		//ctrl_outs_index *** adi,ctrl-outs-index
+	/* External LNA Control */
+	0,		//elna_settling_delay_ns *** adi,elna-settling-delay-ns
+	0,		//elna_gain_mdB *** adi,elna-gain-mdB
+	0,		//elna_bypass_loss_mdB *** adi,elna-bypass-loss-mdB
+	0,		//elna_rx1_gpo0_control_enable *** adi,elna-rx1-gpo0-control-enable
+	0,		//elna_rx2_gpo1_control_enable *** adi,elna-rx2-gpo1-control-enable
+	0,		//elna_gaintable_all_index_enable *** adi,elna-gaintable-all-index-enable
+	/* Digital Interface Control */
+	0,		//digital_interface_tune_skip_mode *** adi,digital-interface-tune-skip-mode
+	0,		//digital_interface_tune_fir_disable *** adi,digital-interface-tune-fir-disable
+	1,		//pp_tx_swap_enable *** adi,pp-tx-swap-enable
+	1,		//pp_rx_swap_enable *** adi,pp-rx-swap-enable
+	0,		//tx_channel_swap_enable *** adi,tx-channel-swap-enable
+	0,		//rx_channel_swap_enable *** adi,rx-channel-swap-enable
+	1,		//rx_frame_pulse_mode_enable *** adi,rx-frame-pulse-mode-enable
+	0,		//two_t_two_r_timing_enable *** adi,2t2r-timing-enable
+	0,		//invert_data_bus_enable *** adi,invert-data-bus-enable
+	0,		//invert_data_clk_enable *** adi,invert-data-clk-enable
+	0,		//fdd_alt_word_order_enable *** adi,fdd-alt-word-order-enable
+	0,		//invert_rx_frame_enable *** adi,invert-rx-frame-enable
+	0,		//fdd_rx_rate_2tx_enable *** adi,fdd-rx-rate-2tx-enable
+	0,		//swap_ports_enable *** adi,swap-ports-enable
+	0,		//single_data_rate_enable *** adi,single-data-rate-enable
+	1,		//lvds_mode_enable *** adi,lvds-mode-enable
+	0,		//half_duplex_mode_enable *** adi,half-duplex-mode-enable
+	0,		//single_port_mode_enable *** adi,single-port-mode-enable
+	0,		//full_port_enable *** adi,full-port-enable
+	0,		//full_duplex_swap_bits_enable *** adi,full-duplex-swap-bits-enable
+	0,		//delay_rx_data *** adi,delay-rx-data
+	0,		//rx_data_clock_delay *** adi,rx-data-clock-delay
+	4,		//rx_data_delay *** adi,rx-data-delay
+	7,		//tx_fb_clock_delay *** adi,tx-fb-clock-delay
+	0,		//tx_data_delay *** adi,tx-data-delay
+	150,	//lvds_bias_mV *** adi,lvds-bias-mV
+	1,		//lvds_rx_onchip_termination_enable *** adi,lvds-rx-onchip-termination-enable
+	0,		//rx1rx2_phase_inversion_en *** adi,rx1-rx2-phase-inversion-enable
+	0xFF,	//lvds_invert1_control *** adi,lvds-invert1-control
+	0x0F,	//lvds_invert2_control *** adi,lvds-invert2-control
+	/* GPO Control */
+	0,		//gpo_manual_mode_enable *** adi,gpo-manual-mode-enable
+	0,		//gpo_manual_mode_enable_mask *** adi,gpo-manual-mode-enable-mask
+	0,		//gpo0_inactive_state_high_enable *** adi,gpo0-inactive-state-high-enable
+	0,		//gpo1_inactive_state_high_enable *** adi,gpo1-inactive-state-high-enable
+	0,		//gpo2_inactive_state_high_enable *** adi,gpo2-inactive-state-high-enable
+	0,		//gpo3_inactive_state_high_enable *** adi,gpo3-inactive-state-high-enable
+	0,		//gpo0_slave_rx_enable *** adi,gpo0-slave-rx-enable
+	0,		//gpo0_slave_tx_enable *** adi,gpo0-slave-tx-enable
+	0,		//gpo1_slave_rx_enable *** adi,gpo1-slave-rx-enable
+	0,		//gpo1_slave_tx_enable *** adi,gpo1-slave-tx-enable
+	0,		//gpo2_slave_rx_enable *** adi,gpo2-slave-rx-enable
+	0,		//gpo2_slave_tx_enable *** adi,gpo2-slave-tx-enable
+	0,		//gpo3_slave_rx_enable *** adi,gpo3-slave-rx-enable
+	0,		//gpo3_slave_tx_enable *** adi,gpo3-slave-tx-enable
+	0,		//gpo0_rx_delay_us *** adi,gpo0-rx-delay-us
+	0,		//gpo0_tx_delay_us *** adi,gpo0-tx-delay-us
+	0,		//gpo1_rx_delay_us *** adi,gpo1-rx-delay-us
+	0,		//gpo1_tx_delay_us *** adi,gpo1-tx-delay-us
+	0,		//gpo2_rx_delay_us *** adi,gpo2-rx-delay-us
+	0,		//gpo2_tx_delay_us *** adi,gpo2-tx-delay-us
+	0,		//gpo3_rx_delay_us *** adi,gpo3-rx-delay-us
+	0,		//gpo3_tx_delay_us *** adi,gpo3-tx-delay-us
+	/* Tx Monitor Control */
+	37000,	//low_high_gain_threshold_mdB *** adi,txmon-low-high-thresh
+	0,		//low_gain_dB *** adi,txmon-low-gain
+	24,		//high_gain_dB *** adi,txmon-high-gain
+	0,		//tx_mon_track_en *** adi,txmon-dc-tracking-enable
+	0,		//one_shot_mode_en *** adi,txmon-one-shot-mode-enable
+	511,	//tx_mon_delay *** adi,txmon-delay
+	8192,	//tx_mon_duration *** adi,txmon-duration
+	2,		//tx1_mon_front_end_gain *** adi,txmon-1-front-end-gain
+	2,		//tx2_mon_front_end_gain *** adi,txmon-2-front-end-gain
+	48,		//tx1_mon_lo_cm *** adi,txmon-1-lo-cm
+	48,		//tx2_mon_lo_cm *** adi,txmon-2-lo-cm
+	/* GPIO definitions */
+	/* Reset_b */
+	{
+		.number = AD9361_1_RESET_B,
+		.platform_ops = &xil_gpio_ops,
+		.extra = &xil_gpio_param
+	},		//gpio_resetb *** reset-gpios
+	/* MCS Sync */
+	{
+		.number = -1,
+		.platform_ops = &xil_gpio_ops,
+		.extra = &xil_gpio_param
+	},		//gpio_sync *** sync-gpios
+	/* Cal-SW1 */
+	{
+		.number = -1,
+		.platform_ops = &xil_gpio_ops,
+		.extra = &xil_gpio_param
+	},		//gpio_cal_sw1 *** cal-sw1-gpios
+	/* Cal-SW2 */
+	{
+		.number = -1,
+		.platform_ops = &xil_gpio_ops,
+		.extra = &xil_gpio_param
+	},		//gpio_cal_sw2 *** cal-sw2-gpios
+
+	{
+		.device_id = AD9361_SPI_DEVICE_ID,
+		.mode = SPI_MODE_1,
+		.chip_select = AD9361_1_SPI_CS,
+		.platform_ops = &spi_eng_platform_ops,
+		.extra = &spi_engine_param
+	},
+
+	/* External LO clocks */
+	NULL,	//(*ad9361_rfpll_ext_recalc_rate)()
+	NULL,	//(*ad9361_rfpll_ext_round_rate)()
+	NULL,	//(*ad9361_rfpll_ext_set_rate)()
+};
+
+AD9361_RXFIRConfig rx_fir_config = {	// BPF PASSBAND 3/20 fs to 1/4 fs
+	3, // rx
+	0, // rx_gain
+	1, // rx_dec
+	{
+		-4, -6, -37, 35, 186, 86, -284, -315,
+		107, 219, -4, 271, 558, -307, -1182, -356,
+		658, 157, 207, 1648, 790, -2525, -2553, 748,
+		865, -476, 3737, 6560, -3583, -14731, -5278, 14819,
+		14819, -5278, -14731, -3583, 6560, 3737, -476, 865,
+		748, -2553, -2525, 790, 1648, 207, 157, 658,
+		-356, -1182, -307, 558, 271, -4, 219, 107,
+		-315, -284, 86, 186, 35, -37, -6, -4,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0
+	}, // rx_coef[128]
+	64, // rx_coef_size
+	{0, 0, 0, 0, 0, 0}, //rx_path_clks[6]
+	0 // rx_bandwidth
+};
+
+AD9361_TXFIRConfig tx_fir_config = {	// BPF PASSBAND 3/20 fs to 1/4 fs
+	3, // tx
+	-6, // tx_gain
+	1, // tx_int
+	{
+		-4, -6, -37, 35, 186, 86, -284, -315,
+		107, 219, -4, 271, 558, -307, -1182, -356,
+		658, 157, 207, 1648, 790, -2525, -2553, 748,
+		865, -476, 3737, 6560, -3583, -14731, -5278, 14819,
+		14819, -5278, -14731, -3583, 6560, 3737, -476, 865,
+		748, -2553, -2525, 790, 1648, 207, 157, 658,
+		-356, -1182, -307, 558, 271, -4, 219, 107,
+		-315, -284, 86, 186, 35, -37, -6, -4,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0
+	}, // tx_coef[128]
+	64, // tx_coef_size
+	{0, 0, 0, 0, 0, 0}, // tx_path_clks[6]
+	0 // tx_bandwidth
+};
+
@@ -0,0 +1,134 @@
+#include "dev_profile.h"
+#include "../config/app_config.h"
+#include "../drivers/platform/xilinx_gpio.h"
+#include "../drivers/axi_core/spi_engine/spi_engine.h"
+#include "../drivers/frequency/ad9528/ad9528.h"
+
+static struct spi_engine_init_param spi_engine_param = {
+	.ref_clk_hz = AD9528_SPI_ENGINE_REF_CLK,
+	.type = SPI_ENGINE,
+	.spi_engine_baseaddr = AD9528_SPI_ENGINE_BASEADDR,
+	.cs_delay = AD9528_SPI_ENGINE_CS_DELAY,
+	.data_width = AD9528_SPI_ENGINE_DATA_WIDTH
+};
+
+static struct xil_gpio_init_param xil_gpio_param = {
+	.type = GPIO_PS,
+	.device_id = AD9528_GPIO_DEVICE_ID
+};
+
+static struct spi_init_param ad9528_spi_init = {
+	.device_id = AD9528_SPI_DEVICE_ID,
+    .max_speed_hz = AD9528_SPI_ENGINE_MAX_SPEED,
+	.mode = SPI_MODE_0,
+	.chip_select = AD9528_SPI_CS,
+	.platform_ops = &spi_eng_platform_ops,
+	.extra = &spi_engine_param
+};
+
+static struct gpio_init_param ad9528_gpio_resetb_init = {
+	.number = AD9528_RESETB,
+	.platform_ops = &xil_gpio_ops,
+	.extra = &xil_gpio_param
+};
+
+static struct gpio_init_param ad9528_gpio_sysref_req_init = {
+	.number = AD9528_SYSREF_REQ,
+	.platform_ops = &xil_gpio_ops,
+	.extra = &xil_gpio_param
+};
+
+static ad9528pll1Settings_t clockPll1Settings = {
+    .refA_Frequency_Hz  = 50000000,
+    .refA_Divider       = 1,
+    .refA_bufferCtrl    = SINGLE_ENDED,
+    .refB_Frequency_Hz  = 0,
+    .refB_Divider       = 1,
+    .refB_bufferCtrl    = DISABLED,
+    .vcxo_Frequency_Hz  = 50000000,
+    .vcxoBufferCtrl     = SINGLE_ENDED,
+    .nDivider           = 1
+};
+
+static ad9528pll2Settings_t clockPll2Settings = {
+    .rfDivider = 4,
+    .n2Divider = 20,
+    .totalNdiv = 80
+};
+
+/*******************************************************************
+ * Output Distribution Settings
+ * 9369CE02A uses the following clock outputs
+ * OUT 1: FPGA REFCLK
+ * OUT 3: FPGA SYSREF
+ * OUT 12: DUT SYSREF
+ * OUT 13: DUT REFCLK
+ *******************************************************************
+ */
+static ad9528outputSettings_t clockOutputSettings = {
+    .outPowerDown = 0xE001,
+    .outSource = {
+            AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV,
+			AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV,
+			AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV
+    },
+    .outBufferCtrl = {
+    		0,0,0,0,0,
+    		0,0,0,0,0,
+			0,0,0,0
+    },
+    .outAnalogDelay = {
+    		0,0,0,0,0,
+    		0,0,0,0,0,
+			0,0,0,0
+    },
+    .outDigitalDelay = {
+    		0,0,0,0,0,
+    		0,0,0,0,0,
+			0,0,0,0
+    },
+    .outChannelDiv = {
+    		5,25,25,5,5,
+			5,5,5,5,5,
+			5,5,10,5
+    },
+    .outFrequency_Hz    = {
+            200e6, 40e6, 40e6, 200e6, 200e6,
+			200e6, 200e6, 200e6, 200e6, 200e6,
+			200e6, 200e6, 100e6, 200e6
+    }
+};
+
+static ad9528sysrefSettings_t clockSysrefSettings = {
+    .sysrefRequestMethod    = PIN,
+    .sysrefSource           = INTERNAL,
+    .sysrefPinEdgeMode      = LEVEL_ACTIVE_HIGH,
+    .sysrefPinBufferMode    = DISABLED,
+    .sysrefPatternMode      = CONTINUOUS,
+    .sysrefNshotMode        = FOUR_PULSES,
+    .sysrefDivide           = 256
+};
+
+static ad9528spiSettings_t clockSpiSettings = {
+    .chipSelectIndex        = AD9528_SPI_CS, //chip select Index, not used
+    .writeBitPolarity       = 0, //Write bit polarity
+    .longInstructionWord    = 1, //16bit instruction word
+    .MSBFirst               = 1, //MSB first
+    .CPHA                   = 0, //Clock phase
+    .CPOL                   = 0, //Clock polarity
+    .enSpiStreaming         = 0, //uint8_t enSpiStreaming;
+    .autoIncAddrUp          = 1, //uint8_t autoIncAddrUp;
+    .fourWireMode           = 1  //uint8_t fourWireMode;
+};
+
+ad9528Init_t ad9528_default_init_param = {
+	/* SPI */
+	.spi_init = &ad9528_spi_init,
+	.gpio_init_resetb = &ad9528_gpio_resetb_init,
+	.gpio_init_sysref_req = &ad9528_gpio_sysref_req_init,
+    .spiSettings = &clockSpiSettings,
+    .pll1Settings = &clockPll1Settings,
+    .pll2Settings = &clockPll2Settings,
+    .outputSettings = &clockOutputSettings,
+    .sysrefSettings = &clockSysrefSettings
+};
@@ -0,0 +1,46 @@
+#include "dev_profile.h"
+#include "spi.h"
+#include "../config/app_config.h"
+#include "../drivers/adc/ad9653/ad9653.h"
+#include "../drivers/axi_core/spi_engine/spi_engine.h"
+#include "../drivers/platform/xilinx_gpio.h"
+
+static struct spi_engine_init_param spi_engine_param = {
+	.ref_clk_hz = AD9653_SPI_ENGINE_REF_CLK,
+	.type = SPI_ENGINE,
+	.spi_engine_baseaddr = AD9653_SPI_ENGINE_BASEADDR,
+	.cs_delay = AD9653_SPI_ENGINE_CS_DELAY,
+	.data_width = AD9653_SPI_ENGINE_DATA_WIDTH
+};
+
+static struct xil_gpio_init_param xil_gpio_param = {
+	.type = GPIO_PS,
+	.device_id = AD9653_GPIO_DEVICE_ID
+};
+
+static struct spi_init_param ad9653_spi_init = {
+	.device_id = AD9653_SPI_DEVICE_ID,
+    .max_speed_hz = AD9653_SPI_ENGINE_MAX_SPEED,
+	.mode = SPI_MODE_4,
+	.chip_select = AD9653_SPI_CS,
+	.platform_ops = &spi_eng_platform_ops,
+	.extra = &spi_engine_param
+};
+
+static struct gpio_init_param ad9653_gpio_resetb_init = {
+	.number = AD9653_POWR_DOWN,
+	.platform_ops = &xil_gpio_ops,
+	.extra = &xil_gpio_param
+};
+
+struct ad9653_init_param ad9653_default_init_param = {
+	/* SPI */
+	.spi_init = &ad9653_spi_init,
+	.gpio_pdwn = &ad9653_gpio_resetb_init
+};
+
+const uint32_t ad9653_default_config_len = 36;
+const struct ad9653_config ad9653_default_config[] = {
+	// configuration
+
+};
@@ -0,0 +1,72 @@
+#include "dev_profile.h"
+#include "spi.h"
+#include "../config/app_config.h"
+#include "../drivers/adc/ad9694/ad9694.h"
+#include "../drivers/axi_core/spi_engine/spi_engine.h"
+#include "../drivers/platform/xilinx_gpio.h"
+
+static struct spi_engine_init_param spi_engine_param = {
+	.ref_clk_hz = AD9694_SPI_ENGINE_REF_CLK,
+	.type = SPI_ENGINE,
+	.spi_engine_baseaddr = AD9694_SPI_ENGINE_BASEADDR,
+	.cs_delay = AD9694_SPI_ENGINE_CS_DELAY,
+	.data_width = AD9694_SPI_ENGINE_DATA_WIDTH
+};
+
+//static struct xil_gpio_init_param xil_gpio_param = {
+//	.type = GPIO_PS,
+//	.device_id = AD9694_GPIO_DEVICE_ID
+//};
+
+static struct spi_init_param ad9694_spi_init = {
+	.device_id = AD9694_SPI_DEVICE_ID,
+    .max_speed_hz = AD9694_SPI_ENGINE_MAX_SPEED,
+	.mode = SPI_MODE_4,
+	.chip_select = AD9694_SPI_CS,
+	.platform_ops = &spi_eng_platform_ops,
+	.extra = &spi_engine_param
+};
+
+struct ad9694_init_param ad9694_default_init_param = {
+	/* SPI */
+	.spi_init = &ad9694_spi_init
+};
+
+const uint32_t ad9694_default_config_len = 36;
+const struct ad9694_config ad9694_default_config[] = {
+	// reset
+	{0x0000, 0x81},
+	{0x1228, 0x4F},	// JESD204B start-up circuit reset
+	{0x1228, 0x0F},	// JESD204B start-up normal operation
+	{0x1222, 0x04}, // PLL calibration
+	{0x1222, 0x00}, // PLL normal operation
+	{0x1262, 0x08}, // PLL loss of lock control - Clear loss of lock
+	{0x1262, 0x00}, // PLL loss of lock control - Normal operation
+
+	// system clock
+	{0x0108, 0x00}, // Clock divider = 1 -> device clock = 368.64MHz
+	{0x0201, 0x00}, // Chip decimation ration = 1 -> full sample rate
+
+	// channel configuration
+	{0x0009, 0x03}, // ADC Pair AB & CD receive all spi command
+	{0x0571, 0x15}, // JESD204B map JTX Link Control 1
+	{0x056E, 0x00}, // JESD204B map PLL control, lane rate 6.75~13.5Gbps, actual = 7.3728Gbps
+	{0x0570, 0x49}, // JESD204B map JTX quick config: L=2 M=2 F=2
+	{0x058B, 0x01}, // JESD204B map JTX SCR L config: scrambler disabled, L=2
+	{0x0590, 0x2F}, // JESD204B map JTX Subclass & NP config: subclass 1, N' = 16
+	{0x058D, 0x1F}, // JESD204B map JTX K config: K = 32
+	{0x058F, 0x2D}, // JESD204B map JTX N config: CS = 0, N = 14
+	{0x0571, 0x14}, // JESD204B map JTX Link Control 1
+	{0x05B0, 0x00}, // SERDOUTx0, SERDOUTx1 power on
+	{0x0120, 0x0A}, // SYSREF COntrol: continuous mode, captured on falling edge
+
+	// fast detect control
+	{0x0040, 0x00}, // FD_B/FD_D, FD_A/FD_C function as Fast Detect B/D, A/C output
+	{0x0245, 0x01}, // Fine fast detect enabled
+	{0x0247, 0xFE}, // Channel map fast detect upper threshold LSB
+	{0x0248, 0x1F}, // Channel map fast detect upper threshold MSB, -> 8190
+	{0x0249, 0xA4}, // Channel map fast detect lower threshold LSB
+	{0x024A, 0x1F}, // Channel map fast detect lower threshold MSB, -> 8100
+	{0x024B, 0x80}, // Channel map fast detect dwell time LSB
+	{0x024C, 0x00}  // Channel map fast detect dwell time MSB, -> 128
+};
@@ -3,11 +3,55 @@

 #include "irq.h"
 #include "error.h"
+#include "../drivers/frequency/hmc7044/hmc7044.h"
+#include "../drivers/frequency/ad9528/ad9528.h"
+#include "../drivers/frequency/lmk04828/lmk04828.h"
+#include "../drivers/frequency/lmx2594/lmx2594.h"
+#include "../drivers/rf-transceiver/ad9361_reg/ad9361_reg.h"
+#include "../drivers/rf-transceiver/ad9361/ad9361_api.h"
+#include "../drivers/adc/ad9694/ad9694.h"
+#include "../drivers/adc/ad9653/ad9653.h"
 #include "../config/app_config.h"

 // device parameters
 extern struct irq_init_param intc_init_param;
-extern struct timer_init_param scutimer_init_param;
-extern struct global_timer_init_param globaltimer_init_param;
+extern struct timer_init_param apptimer_init_param;
+
+// HMC7044
+extern struct hmc7044_init_param hmc7044_default_init_param;
+
+// AD9528
+extern ad9528Init_t ad9528_default_init_param;
+
+// LMK04828
+extern struct lmk04828_init_param lmk04828_default_init_param;
+extern const struct lmk04828_config lmk04828_default_config[];
+extern const uint32_t lmk04828_default_config_len;
+
+// LMX2594
+extern struct lmx2594_init_param lmx2594_adc_init_param;
+extern struct lmx2594_init_param lmx2594_dac_init_param;
+extern const struct lmx2594_config lmx2594_default_config[];
+extern const uint32_t lmx2594_default_config_len;
+
+// AD9361
+extern AD9361_InitParam ad9361_default_init_param;
+extern AD9361_RXFIRConfig rx_fir_config;
+extern AD9361_TXFIRConfig tx_fir_config;
+extern struct ad9361_reg_init_param ad9361_1_reg_default_init_param;
+extern struct ad9361_reg_init_param ad9361_2_reg_default_init_param;
+uint32_t ad9361_1_reg_config(struct ad9361_reg_dev *dev);
+uint32_t ad9361_2_reg_config(struct ad9361_reg_dev *dev);
+
+// AD9653
+extern struct ad9653_init_param ad9653_default_init_param;
+extern const struct ad9653_config ad9653_default_config[];
+extern const uint32_t ad9653_default_config_len;
+
+// AD9694
+extern struct ad9694_init_param ad9694_default_init_param;
+extern const struct ad9694_config ad9694_default_config[];
+extern const uint32_t ad9694_default_config_len;
+

 #endif /* SRC_DEV_PROFILE_H_ */
@@ -1,11 +0,0 @@
-#include "dev_profile.h"
-#include "global_timer.h"
-#include "../config/app_config.h"
-
-struct global_timer_init_param globaltimer_init_param = {
-	.base_addr = GLOBAL_TIMER_BASEADDR,
-	.id = GLOBAL_TIMER_DEVICE_ID,
-	.freq_hz = GLOBAL_TIMER_CLK_HZ,
-	.load_value = 0x0000000000000000
-};
-
@@ -0,0 +1,132 @@
+#include "dev_profile.h"
+#include "../config/app_config.h"
+#include "../drivers/platform/xilinx_gpio.h"
+#include "../drivers/axi_core/spi_engine/spi_engine.h"
+#include "../drivers/frequency/hmc7044/hmc7044.h"
+
+
+static struct spi_engine_init_param spi_engine_param = {
+	.ref_clk_hz = HMC7044_SPI_ENGINE_REF_CLK,
+	.type = SPI_ENGINE,
+	.spi_engine_baseaddr = HMC7044_SPI_ENGINE_BASEADDR,
+	.cs_delay = HMC7044_SPI_ENGINE_CS_DELAY,
+	.data_width = HMC7044_SPI_ENGINE_DATA_WIDTH
+};
+
+//static struct xil_gpio_init_param xil_gpio_param = {
+//	.type = GPIO_PS,
+//	.device_id = AD9361_GPIO_DEVICE_ID
+//};
+
+// hmc7044 spi settings
+static struct spi_init_param hmc7044_spi_init_param = {
+	.device_id = HMC7044_SPI_DEVICE_ID,
+    .max_speed_hz = HMC7044_SPI_ENGINE_MAX_SPEED,
+	.mode = SPI_MODE_4,
+	.chip_select = HMC7044_SPI_CS_HMC7044,
+	.platform_ops = &spi_eng_platform_ops,
+	.extra = &spi_engine_param
+};
+
+// hmc7044 channel specifications
+struct hmc7044_chan_spec hmc7044_chan_spec[4] = {
+	/* AD9361_XTAL */
+	{
+		.disable = 0,
+		.num = 3,
+		.divider = 100,
+		.coarse_delay = 0,
+		.fine_delay = 0,
+		.high_performance_mode_dis = true,
+		.start_up_mode_dynamic_enable = false,
+		.dynamic_driver_enable = false,
+		.output_control0_rb4_enable = true,
+		.force_mute_enable = false,
+		.driver_mode = CML,
+		.driver_impedance = INTERNAL_100OHM_PER_PIN,
+		.out_mux_mode = CHANNEL_DIV
+	},
+	/* FPGA_DAC_LOGIC_CLK */
+	{
+		.disable = 0,
+		.num = 4,
+		.divider = 10,
+		.coarse_delay = 0,
+		.fine_delay = 0,
+		.high_performance_mode_dis = true,
+		.start_up_mode_dynamic_enable = false,
+		.dynamic_driver_enable = false,
+		.output_control0_rb4_enable = true,
+		.force_mute_enable = false,
+		.driver_mode = CML,
+		.driver_impedance = INTERNAL_100OHM_PER_PIN,
+		.out_mux_mode = CHANNEL_DIV
+	},
+	/* B_AD9361_XTAL */
+	{
+		.disable = 0,
+		.num = 12,
+		.divider = 100,
+		.coarse_delay = 0,
+		.fine_delay = 0,
+		.high_performance_mode_dis = false,
+		.start_up_mode_dynamic_enable = false,
+		.dynamic_driver_enable = false,
+		.output_control0_rb4_enable = true,
+		.force_mute_enable = false,
+		.driver_mode = CML,
+		.driver_impedance = INTERNAL_100OHM_PER_PIN,
+		.out_mux_mode = CHANNEL_DIV
+	},
+	/* AD9361_RX_EXT_LO */
+	{
+		.disable = 0,
+		.num = 13,
+		.divider = 10,
+		.coarse_delay = 0,
+		.fine_delay = 0,
+		.high_performance_mode_dis = false,
+		.start_up_mode_dynamic_enable = false,
+		.dynamic_driver_enable = false,
+		.output_control0_rb4_enable = true,
+		.force_mute_enable = false,
+		.driver_mode = CML,
+		.driver_impedance = INTERNAL_100OHM_PER_PIN,
+		.out_mux_mode = CHANNEL_DIV
+	},
+};
+
+// hmc7044 default configurations
+struct hmc7044_init_param hmc7044_default_init_param = {
+	.spi_init = &hmc7044_spi_init_param,
+	.clkin_freq = {0, 100000000, 0, 0},
+	.vcxo_freq = 100000000,
+	.pll2_freq = 2500000000,
+	.pll1_loop_bw = 200,
+	.sysref_timer_div = 1536,
+	.in_buf_mode = {
+			BUFFER_DISABLE,
+			ENABLE_AC_COUPLE | ENABLE_INTERNAL_TERM | BUFFER_ENABLE,
+			BUFFER_DISABLE,
+			BUFFER_DISABLE,
+			ENABLE_AC_COUPLE | ENABLE_INTERNAL_TERM | BUFFER_ENABLE
+	},
+	.gpi_ctrl = {
+			GPI_DISABLE,
+			GPI_DISABLE,
+			CHIP_SLEEP_MODE,
+			PULSE_GEN_REQUSET
+	},
+	.gpo_ctrl = {
+			PLL1_LOCK_DETECT | GPO_CMOS_MODE,
+			PLL2_LOCK_DETECT | GPO_CMOS_MODE,
+			GPO_DISABLE,
+			GPO_DISABLE
+	},
+	.num_channels = 4,
+	.pll1_ref_prio_ctrl = 0xE4,
+	.sync_pin_mode = SYNC_MULTICHIP,
+	.high_performance_mode_clock_dist_en = false,
+	.pulse_gen_mode = PULSE_ONE,
+	.channels = hmc7044_chan_spec
+};
@@ -2,6 +2,7 @@
 #include "irq.h"
 #include "../config/app_config.h"
 #include "../drivers/platform/xilinx_irq.h"
+
 struct xil_irq_init_param xil_intc_init_param = {
 	.type = IRQ_PS
 };
@@ -0,0 +1,182 @@
+#include "dev_profile.h"
+#include "spi.h"
+#include "../config/app_config.h"
+#include "../drivers/frequency/lmk04828/lmk04828.h"
+#include "../drivers/axi_core/spi_engine/spi_engine.h"
+#include "../drivers/platform/xilinx_gpio.h"
+
+static struct spi_engine_init_param spi_engine_param = {
+	.ref_clk_hz = LMK04828_SPI_ENGINE_REF_CLK,
+	.type = SPI_ENGINE,
+	.spi_engine_baseaddr = LMK04828_SPI_ENGINE_BASEADDR,
+	.cs_delay = LMK04828_SPI_ENGINE_CS_DELAY,
+	.data_width = LMK04828_SPI_ENGINE_DATA_WIDTH
+};
+
+//static struct xil_gpio_init_param xil_gpio_param = {
+//	.type = GPIO_PS,
+//	.device_id = LMK04828_GPIO_DEVICE_ID
+//};
+
+static struct spi_init_param lmk04828_spi_init = {
+	.device_id = LMK04828_SPI_DEVICE_ID,
+    .max_speed_hz = LMK04828_SPI_ENGINE_MAX_SPEED,
+	.mode = SPI_MODE_0,
+	.chip_select = LMK04828_SPI_CS,
+	.platform_ops = &spi_eng_platform_ops,
+	.extra = &spi_engine_param
+};
+
+struct lmk04828_init_param lmk04828_default_init_param = {
+	/* SPI */
+	.spi_init = &lmk04828_spi_init
+};
+
+const uint32_t lmk04828_default_config_len = 137;
+const struct lmk04828_config lmk04828_default_config[] = {
+	// 192MHz
+	{0x0000, 0x90}, // [7] reset; [4] 3-wire mode disabled
+	{0x0000, 0x10}, // [7] normal operation; [4] 3-wire mode disabled
+	{0x0002, 0x00}, // [0] normal operation
+	{0x0003, 0x06}, // [7-0] product device type, read only, default: 6
+	{0x0004, 0xD0}, // [7-0] msb of product identifier, read only, default: 208
+	{0x0005, 0x5B}, // [7-0] lsb of product identifier, read only, default: 91
+	{0x0006, 0x00}, // [7-0] ic version identifier, read only, default: 32
+	{0x000C, 0x51}, // [7-0] msb of vendor identifier, read only, default: 81
+	{0x000D, 0x04}, // [7-0] lsb of vendor identifier, read only, default: 4
+	// device clock 0
+	{0x0100, 0x10}, // [6] output drive level (ODL); [5] input drive level (IDL); [4-0] device clock (DCLK) output divider
+	{0x0101, 0x55}, // DCLK: [7-4] output digital delay (DDLY) high count; [3-0] DDLY low count
+	{0x0102, 0x55},
+	{0x0103, 0x01}, // DCLK: [7-3] analog delay (ADLY) value, 25 ps per lsb; [2] ADLY input mux; [1-0] DCLK input mux
+	{0x0104, 0x22}, // [6] DCLK half step value; [5] SDCLK output MUX; [4-1] SDCLK DDLY; [0] SYSREF half step value
+	{0x0105, 0x00}, // SYSREF: [4] ADLY enable; [3:0] ADLY value, 600 ps + 150 ps per lsb
+	{0x0106, 0xF0}, // [7] DCLK DDLY enable; [6] DCLK glitchless half step enable; [5] DCLK glitchless ADLY enable; [4] DCLK ADLY enable; [3]: clock group enable; [2-1] SYSREF disable mode; [0]: SYSREF disable
+	{0x0107, 0x11}, // [7] SDCLK output polarity; [6-4] SDCLK output format; [3] DCLK output polarity; [2:0] DCLK output format
+	// device clock 2
+	{0x0108, 0x10}, // [6] output drive level (ODL); [5] input drive level (IDL); [4-0] device clock (DCLK) output divider
+	{0x0109, 0x55}, // DCLK: [7-4] output digital delay (DDLY) high count; [3-0] DDLY low count
+	{0x010A, 0x55},
+	{0x010B, 0x00}, // DCLK: [7-3] analog delay (ADLY) value, 25 ps per lsb; [2] ADLY input mux; [1-0] DCLK input mux
+	{0x010C, 0x22}, // [6] DCLK half step value; [5] SDCLK output MUX; [4-1] SDCLK DDLY; [0] SYSREF half step value
+	{0x010D, 0x00}, // SYSREF: [4] ADLY enable; [3:0] ADLY value, 600 ps + 150 ps per lsb
+	{0x010E, 0xF0}, // [7] DCLK DDLY enable; [6] DCLK glitchless half step enable; [5] DCLK glitchless ADLY enable; [4] DCLK ADLY enable; [3]: clock group enable; [2-1] SYSREF disable mode; [0]: SYSREF disable
+	{0x010F, 0x10}, // [7] SDCLK output polarity; [6-4] SDCLK output format; [3] DCLK output polarity; [2:0] DCLK output format
+	// device clock 4
+	{0x0110, 0x10}, // [6] output drive level (ODL); [5] input drive level (IDL); [4-0] device clock (DCLK) output divider
+	{0x0111, 0x55}, // DCLK: [7-4] output digital delay (DDLY) high count; [3-0] DDLY low count
+	{0x0112, 0x55},
+	{0x0113, 0x00}, // DCLK: [7-3] analog delay (ADLY) value, 25 ps per lsb; [2] ADLY input mux; [1-0] DCLK input mux
+	{0x0114, 0x22}, // [6] DCLK half step value; [5] SDCLK output MUX; [4-1] SDCLK DDLY; [0] SYSREF half step value
+	{0x0115, 0x00}, // SYSREF: [4] ADLY enable; [3:0] ADLY value, 600 ps + 150 ps per lsb
+	{0x0116, 0xF0}, // [7] DCLK DDLY enable; [6] DCLK glitchless half step enable; [5] DCLK glitchless ADLY enable; [4] DCLK ADLY enable; [3]: clock group enable; [2-1] SYSREF disable mode; [0]: SYSREF disable
+	{0x0117, 0x11}, // [7] SDCLK output polarity; [6-4] SDCLK output format; [3] DCLK output polarity; [2:0] DCLK output format
+	// device clock 6
+	{0x0118, 0x10}, // [6] output drive level (ODL); [5] input drive level (IDL); [4-0] device clock (DCLK) output divider
+	{0x0119, 0x55}, // DCLK: [7-4] output digital delay (DDLY) high count; [3-0] DDLY low count
+	{0x011A, 0x55},
+	{0x011B, 0x00}, // DCLK: [7-3] analog delay (ADLY) value, 25 ps per lsb; [2] ADLY input mux; [1-0] DCLK input mux
+	{0x011C, 0x02}, // [6] DCLK half step value; [5] SDCLK output MUX; [4-1] SDCLK DDLY; [0] SYSREF half step value
+	{0x011D, 0x00}, // SYSREF: [4] ADLY enable; [3:0] ADLY value, 600 ps + 150 ps per lsb
+	{0x011E, 0xF0}, // [7] DCLK DDLY enable; [6] DCLK glitchless half step enable; [5] DCLK glitchless ADLY enable; [4] DCLK ADLY enable; [3]: clock group enable; [2-1] SYSREF disable mode; [0]: SYSREF disable
+	{0x011F, 0x55}, // [7] SDCLK output polarity; [6-4] SDCLK output format; [3] DCLK output polarity; [2:0] DCLK output format
+	// device clock 8
+	{0x0120, 0x10}, // [6] output drive level (ODL); [5] input drive level (IDL); [4-0] device clock (DCLK) output divider
+	{0x0121, 0x55}, // DCLK: [7-4] output digital delay (DDLY) high count; [3-0] DDLY low count
+	{0x0122, 0x55},
+	{0x0123, 0x00}, // DCLK: [7-3] analog delay (ADLY) value, 25 ps per lsb; [2] ADLY input mux; [1-0] DCLK input mux
+	{0x0124, 0x22}, // [6] DCLK half step value; [5] SDCLK output MUX; [4-1] SDCLK DDLY; [0] SYSREF half step value
+	{0x0125, 0x00}, // SYSREF: [4] ADLY enable; [3:0] ADLY value, 600 ps + 150 ps per lsb
+	{0x0126, 0xF0}, // [7] DCLK DDLY enable; [6] DCLK glitchless half step enable; [5] DCLK glitchless ADLY enable; [4] DCLK ADLY enable; [3]: clock group enable; [2-1] SYSREF disable mode; [0]: SYSREF disable
+	{0x0127, 0x55}, // [7] SDCLK output polarity; [6-4] SDCLK output format; [3] DCLK output polarity; [2:0] DCLK output format
+	// device clock 10
+	{0x0128, 0x10}, // [6] output drive level (ODL); [5] input drive level (IDL); [4-0] device clock (DCLK) output divider
+	{0x0129, 0x55}, // DCLK: [7-4] output digital delay (DDLY) high count; [3-0] DDLY low count
+	{0x012A, 0x55},
+	{0x012B, 0x00}, // DCLK: [7-3] analog delay (ADLY) value, 25 ps per lsb; [2] ADLY input mux; [1-0] DCLK input mux
+	{0x012C, 0x22}, // [6] DCLK half step value; [5] SDCLK output MUX; [4-1] SDCLK DDLY; [0] SYSREF half step value
+	{0x012D, 0x00}, // SYSREF: [4] ADLY enable; [3:0] ADLY value, 600 ps + 150 ps per lsb
+	{0x012E, 0xF0}, // [7] DCLK DDLY enable; [6] DCLK glitchless half step enable; [5] DCLK glitchless ADLY enable; [4] DCLK ADLY enable; [3]: clock group enable; [2-1] SYSREF disable mode; [0]: SYSREF disable
+	{0x012F, 0x51}, // [7] SDCLK output polarity; [6-4] SDCLK output format; [3] DCLK output polarity; [2:0] DCLK output format
+	// device clock 12
+	{0x0130, 0x10}, // [6] output drive level (ODL); [5] input drive level (IDL); [4-0] device clock (DCLK) output divider
+	{0x0131, 0x55}, // DCLK: [7-4] output digital delay (DDLY) high count; [3-0] DDLY low count
+	{0x0132, 0x55},
+	{0x0133, 0x00}, // DCLK: [7-3] analog delay (ADLY) value, 25 ps per lsb; [2] ADLY input mux; [1-0] DCLK input mux
+	{0x0134, 0x22}, // [6] DCLK half step value; [5] SDCLK output MUX; [4-1] SDCLK DDLY; [0] SYSREF half step value
+	{0x0135, 0x00}, // SYSREF: [4] ADLY enable; [3:0] ADLY value, 600 ps + 150 ps per lsb
+	{0x0136, 0xF0}, // [7] DCLK DDLY enable; [6] DCLK glitchless half step enable; [5] DCLK glitchless ADLY enable; [4] DCLK ADLY enable; [3]: clock group enable; [2-1] SYSREF disable mode; [0]: SYSREF disable
+	{0x0137, 0x55}, // [7] SDCLK output polarity; [6-4] SDCLK output format; [3] DCLK output polarity; [2:0] DCLK output format
+	// clock distribution source
+	{0x0138, 0x20}, // [6-5] VCO mux; [4] OSCout mux; [3:0] OSCout format
+	{0x0139, 0x03}, // [2] SYSREF output mux; [1-0] SYSREF source
+	{0x013A, 0x0C}, // [4-0] SYSREF divider [12:8]
+	{0x013B, 0x00}, // [7-0] SYSREF divider [7:0]
+	{0x013C, 0x00}, // [4-0] SYSREF DDLY [12:8]
+	{0x013D, 0x08}, // [7-0] SYSREF DDLY [7:0]
+	{0x013E, 0x03}, // [1-0] SYSREF pulse count
+	{0x013F, 0x00}, // [4] pll2 mux; [3] pll1 mux; [2-1] feedback mux; [0]  feedback mux enable
+	{0x0140, 0x0B}, // power-down control: [7] pll1; [6] vco_ldo; [5] vco; [4] OSCin; [3] individual SYSREF; [2] SYSREF; [1] SYSREF DDLY; [0] SYSREF pluse generator
+	{0x0141, 0x00}, // dynamic DDLY control
+	{0x0142, 0x00}, // dynamic DDLY step control
+	{0x0143, 0x10},
+	{0x0144, 0xFF},
+	{0x0145, 0x7F},
+	{0x0146, 0x12},
+	{0x0147, 0x1A},
+	{0x0148, 0x03},
+	{0x0149, 0x05},
+	{0x014A, 0x1B},
+	{0x014B, 0x16},
+	{0x014C, 0x00},
+	{0x014D, 0x00},
+	{0x014E, 0xC0},
+	{0x014F, 0x7F},
+	{0x0150, 0x03},
+	{0x0151, 0x02},
+	{0x0152, 0x00},
+	{0x0153, 0x00},
+	{0x0154, 0x78},
+	{0x0155, 0x00},
+	{0x0156, 0x7D},
+	{0x0157, 0x00},
+	{0x0158, 0x96},
+	{0x0159, 0x06},
+	{0x015A, 0x00},
+	{0x015B, 0xD4},
+	{0x015C, 0x20},
+	{0x015D, 0x00},
+	{0x015E, 0x00},
+	{0x015F, 0x3B},
+	{0x0160, 0x00},
+	{0x0161, 0x02},
+	{0x0162, 0x44},
+	{0x0163, 0x00},
+	{0x0164, 0x00},
+	{0x0165, 0x0C},
+	{0x0171, 0xAA},
+	{0x0172, 0x02},
+	{0x017C, 0x15},
+	{0x017D, 0x33},
+	{0x0166, 0x00},
+	{0x0167, 0x00},
+	{0x0168, 0x19},
+	{0x0169, 0x59},
+	{0x016A, 0x20},
+	{0x016B, 0x00},
+	{0x016C, 0x00},
+	{0x016D, 0x00},
+	{0x016E, 0x1B},
+	{0x0173, 0x00},
+	{0x0182, 0x00},
+	{0x0183, 0x00},
+	{0x0184, 0x00},
+	{0x0185, 0x00},
+	{0x0188, 0x00},
+	{0x0189, 0x00},
+	{0x018A, 0x00},
+	{0x018B, 0x00},
+	{0x1FFD, 0x00},
+	{0x1FFE, 0x00},
+	{0x1FFF, 0x53}
+};
@@ -0,0 +1,181 @@
+#include "dev_profile.h"
+#include "spi.h"
+#include "../config/app_config.h"
+#include "../drivers/frequency/lmx2594/lmx2594.h"
+#include "../drivers/axi_core/spi_engine/spi_engine.h"
+#include "../drivers/platform/xilinx_gpio.h"
+
+static struct spi_engine_init_param spi_engine_param = {
+	.ref_clk_hz = AD9653_SPI_ENGINE_REF_CLK,
+	.type = SPI_ENGINE,
+	.spi_engine_baseaddr = AD9653_SPI_ENGINE_BASEADDR,
+	.cs_delay = AD9653_SPI_ENGINE_CS_DELAY,
+	.data_width = AD9653_SPI_ENGINE_DATA_WIDTH
+};
+
+//static struct xil_gpio_init_param xil_gpio_param = {
+//	.type = GPIO_PS,
+//	.device_id = AD9653_GPIO_DEVICE_ID
+//};
+
+static struct spi_init_param lmx2594_adc_spi_init = {
+	.device_id = LMX2594_ADC_SPI_DEVICE_ID,
+    .max_speed_hz = LMX2594_ADC_SPI_ENGINE_MAX_SPEED,
+	.mode = SPI_MODE_0,
+	.chip_select = LMX2594_ADC_SPI_CS,
+	.platform_ops = &spi_eng_platform_ops,
+	.extra = &spi_engine_param
+};
+
+static struct spi_init_param lmx2594_dac_spi_init = {
+	.device_id = LMX2594_DAC_SPI_DEVICE_ID,
+    .max_speed_hz = LMX2594_DAC_SPI_ENGINE_MAX_SPEED,
+	.mode = SPI_MODE_0,
+	.chip_select = LMX2594_DAC_SPI_CS,
+	.platform_ops = &spi_eng_platform_ops,
+	.extra = &spi_engine_param
+};
+
+struct lmx2594_init_param lmx2594_adc_init_param = {
+	/* SPI */
+	.spi_init = &lmx2594_adc_spi_init
+};
+
+struct lmx2594_init_param lmx2594_dac_init_param = {
+	/* SPI */
+	.spi_init = &lmx2594_dac_spi_init
+};
+
+const uint32_t lmx2594_default_config_len = 110;
+const struct lmx2594_config lmx2594_default_config[] = {
+	// 0 ~ 78: General configuration
+	// 79 ~ 106: Ramping configuration
+	// 107 ~ 112: Readback registers
+
+	// Recommended Initial Power-Up Sequence
+	// For the most reliable programming, TI recommends this procedure::
+	// 1. Apply power to device.
+	// 2. Program RESET = 1 to reset registers.
+	// 3. Program RESET = 0 to remove reset.
+	// 4. Program registers as shown in the register map in REVERSE order from highest to lowest.
+	// 5. Wait 10 ms.
+	// 6. Program register R0 one additional time with FCAL_EN = 1 to ensure that the VCO calibration runs from a stable state.
+
+	// Reset
+	{  0, 0x0002},
+
+	// Remove Reset
+	{  0, 0x0000},
+
+	// Reverse order programming
+	{106, 0x0000},
+	{105, 0x0021},
+	{104, 0x0000},
+	{103, 0xD555},
+	{102, 0x3F97},
+	{101, 0x0011},
+	{100, 0x0000},
+	{ 99, 0x2AAB},
+	{ 98, 0x01A0},
+	{ 97, 0x0888},
+	{ 96, 0x0000},
+	{ 95, 0x0000}, // fixed
+	{ 94, 0x0000}, // fixed
+	{ 93, 0x0000}, // fixed
+	{ 92, 0x0000}, // fixed
+	{ 91, 0x0000}, // fixed
+	{ 90, 0x0000}, // fixed
+	{ 89, 0x0000}, // fixed
+	{ 88, 0x0000}, // fixed
+	{ 87, 0x0000}, // fixed
+	{ 86, 0x5879},
+	{ 85, 0xEC58},
+	{ 84, 0x0001},
+	{ 83, 0x54C9},
+	{ 82, 0x2961},
+	{ 81, 0x0000},
+	{ 80, 0x4000},
+	{ 79, 0x001F},
+	{ 78, 0x0003}, // [8:1] VCO_CAPCTRL_STRT
+	{ 77, 0x0000}, // fixed
+	{ 76, 0x000C}, // fixed
+	{ 75, 0x0800}, // [10:6] CHDIV
+	{ 74, 0x0000}, // [11:6] JESD_DAC4_CTRL; [5:0] JESD_DAC3_CTRL
+	{ 73, 0x003F}, // [11:6] JESD_DAC2_CTRL; [5:0] JESD_DAC1_CTRL
+	{ 72, 0x0001}, // [10:0] SYSREF_DIV
+	{ 71, 0x0081}, // [7:5] SYSREF_DIV_PRE; [4] SYSREF_PULSE; [3] SYSREF_EN; [2] SYSREF_REPEAT
+	{ 70, 0xC350}, // [15:0] MASH_RST_COUNT
+	{ 69, 0x0000}, // [15:0] MASH_RST_COUNT
+	{ 68, 0x03E8}, // fixed
+	{ 67, 0x0000}, // fixed
+	{ 66, 0x01F4}, // fixed
+	{ 65, 0x0000}, // fixed
+	{ 64, 0x1388}, // fixed
+	{ 63, 0x0000}, // fixed
+	{ 62, 0x0322}, // fixed
+	{ 61, 0x00A8}, // fixed
+	{ 60, 0x0000}, // [15:0] LD_DLY
+	{ 59, 0x0001}, // [0] LD_TYPE
+	{ 58, 0x9001}, // [15] INPIN_IGNORE; [14] INPIN_HYST; [13:12] INPIN_LVL; [11:9] INPIN_FMT
+	{ 57, 0x0020}, // fixed
+	{ 56, 0x0000}, // fixed
+	{ 55, 0x0000}, // fixed
+	{ 54, 0x0000}, // fixed
+	{ 53, 0x0000}, // fixed
+	{ 52, 0x0820}, // fixed
+	{ 51, 0x0080}, // fixed
+	{ 50, 0x0000}, // fixed
+	{ 49, 0x4180}, // fixed
+	{ 48, 0x0300}, // fixed
+	{ 47, 0x0300}, // fixed
+	{ 46, 0x07FC}, // [1:0] OUTB_MUX
+	{ 45, 0xC0DF}, // [12:11] OUTA_MUX; [10:9] OUT_ISET; [5:0] OUTB_PWR
+	{ 44, 0x1AA3}, // [13:8] OUTA_PWR; [7] OUTB_PD; [6] OUTA_PD; [5] MASH_RESET_N; [2:0] MASH_ORDER
+	{ 43, 0x0000}, // [15:0] PLL_NUM
+	{ 42, 0x0000}, // [15:0] PLL_NUM
+	{ 41, 0x0000}, // [15:0] MASH_SEE
+	{ 40, 0x0000}, // [15:0] MASH_SEE
+	{ 39, 0x03E8}, // [15:0] PLL_DEN
+	{ 38, 0x0000}, // [15:0] PLL_DEN
+	{ 37, 0x0304}, // [37] MASH_SEED_EN; [13:8] PFD_DLY_SEL
+	{ 36, 0x0028}, // [15:0] PLL_N
+	{ 35, 0x0004}, // fixed
+	{ 34, 0x0000}, // [2:0] PLL_N
+	{ 33, 0x1E21}, // fixed
+	{ 32, 0x0393}, // fixed
+	{ 31, 0x43EC}, // [14] SEG1_EN
+	{ 30, 0x318C}, // fixed
+	{ 29, 0x318C}, // fixed
+	{ 28, 0x0488}, // fixed
+	{ 27, 0x0002}, // fixed
+	{ 26, 0x0DB0}, // fixed
+	{ 25, 0x0C2B}, // fixed
+	{ 24, 0x071A}, // fixed
+	{ 23, 0x007C}, // fixed
+	{ 22, 0x0001}, // fixed
+	{ 21, 0x0401}, // fixed
+	{ 20, 0xE048}, // [13:11] VCO_SEL. [10] VCO_SEL_FORCE
+	{ 19, 0x27B7}, // [7:0] VCO_CAPCTRL
+	{ 18, 0x0064}, // fixed
+	{ 17, 0x012C}, // [8:0] VCO_DACISET_STRT
+	{ 16, 0x0080}, // [8:0] VCO_DACISET
+	{ 15, 0x064F}, // fixed
+	{ 14, 0x1E70}, // [6:4] CPG
+	{ 13, 0x4000}, // fixed
+	{ 12, 0x5001}, // [11:0] PLL_R_PR
+	{ 11, 0x0018}, // [11:4] PLL_R
+	{ 10, 0x10D8}, // [11:7] MULT
+	{  9, 0x0604}, // [12] OSC_2X
+	{  8, 0x2000}, // [14] VCO_DACISET_FORCE; [11] VCO_CAPCTRL_FORCE
+	{  7, 0x40B2}, // [14] OUT_FORCE
+	{  6, 0xC802}, // fixed
+	{  5, 0x00C8}, // fixed
+	{  4, 0x0C43}, // [15:8] ACAL_CMP_DLY
+	{  3, 0x0642}, // fixed
+	{  2, 0x0500}, // fixed
+	{  1, 0x0809}, // [2:0] CAL_CLK_DIV
+	{  0, 0x2598}, // [15] RAMP_EN; [14] VCO_PHASE_SYNC; [9] OUT_MUTE; [8:7] FCAL_HPFD_ADJ; [6:5] FCAL_LPFD_ADJ; [3] FCAL_EN; [2] MUXOUT_LD_SEL; [1] RESET; [0] POWERDOWN
+
+	// one more time
+	{  0, 0x2598}
+};
@@ -3,15 +3,19 @@
 #include "../config/app_config.h"
 #include "../drivers/platform/xilinx_timer.h"

-struct xil_timer_init_param xil_scutimer_init_param = {
+struct xil_timer_init_param xil_apptimer_init_param = {
 	.active_tmr = 0,
+#ifdef __aarch64__
+	.type = TIMER_PL
+#else
 	.type = TIMER_PS
+#endif
 };

-struct timer_init_param scutimer_init_param = {
-	.id = SCUTIMER_DEVICE_ID,
-	.freq_hz = SCU_TIMER_CLK_HZ,
-	.ticks_count = (SCU_TIMER_CLK_HZ/10), //update log every 100ms
+struct timer_init_param apptimer_init_param = {
+	.id = APPTIMER_DEVICE_ID,
+	.freq_hz = APP_TIMER_CLK_HZ,
+	.ticks_count = (APP_TIMER_CLK_HZ/10), //update log every 100ms
 	.platform_ops = &xil_timer_ops,
-	.extra = &xil_scutimer_init_param
+	.extra = &xil_apptimer_init_param
 };
@@ -0,0 +1,129 @@
+/***************************************************************************//**
+ * @file ad9653.c
+ * @brief Implementation of AD9653 Driver.
+ * @author DBogdan ([email protected])
+ ********************************************************************************
+ * Copyright 2014-2016(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Analog Devices, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * - The use of this software may or may not infringe the patent rights
+ * of one or more patent holders. This license does not release you
+ * from the requirement that you obtain separate licenses from these
+ * patent holders to use this software.
+ * - Use of the software either in source or binary form, must be run
+ * on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include "ad9653.h"
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "../../../include/error.h"
+
+/***************************************************************************//**
+ * @brief ad9653_read
+ *******************************************************************************/
+int32_t ad9653_read(struct ad9653_dev *dev,
+			uint16_t reg_addr,
+			uint8_t *reg_data)
+{
+	uint8_t tx_buf[2];
+	uint8_t rx_buf[1];
+	int32_t ret;
+
+	tx_buf[0] = 0x80 | (reg_addr >> 8);
+	tx_buf[1] = reg_addr & 0xFF;
+	
+
+	ret = spi_write_and_read_3wire(dev->spi_desc,
+			tx_buf, rx_buf, 2, 1);
+
+	*reg_data = rx_buf[0];
+
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief ad9653_write
+ *******************************************************************************/
+int32_t ad9653_write(struct ad9653_dev *dev,
+			 uint16_t reg_addr,
+			 uint8_t reg_data)
+{
+	uint8_t buf[3];
+
+	int32_t ret;
+
+	buf[0] = reg_addr >> 8;
+	buf[1] = reg_addr & 0xFF;
+	buf[2] = reg_data;
+
+	ret = spi_write_and_read_3wire(dev->spi_desc,
+				 buf, NULL, 3, 0);
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief ad9653_init
+ *******************************************************************************/
+int32_t ad9653_init(struct ad9653_dev **device,
+		     const struct ad9653_init_param *init_param)
+{
+	int ret = SUCCESS;
+	struct ad9653_dev *dev;
+
+	dev = (struct ad9653_dev *)malloc(sizeof(*dev));
+	if (!dev)
+		return FAILURE;
+
+	/* SPI */
+	ret = spi_init(&dev->spi_desc, init_param->spi_init);
+
+	*device = dev;
+
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief Free the resources allocated by ad9653_setup().
+ *
+ * @param dev - The device structure.
+ *
+ * @return SUCCESS in case of success, negative error code otherwise.
+*******************************************************************************/
+int32_t ad9653_remove(struct ad9653_dev *dev)
+{
+	int32_t ret;
+
+	ret = spi_remove(dev->spi_desc);
+
+	free(dev);
+
+	return ret;
+}
@@ -0,0 +1,233 @@
+/***************************************************************************//**
+ * @file ad9653.h
+ * @brief Header file of AD9653 Driver.
+ * @author DBogdan ([email protected])
+ ********************************************************************************
+ * Copyright 2014-2016(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Analog Devices, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * - The use of this software may or may not infringe the patent rights
+ * of one or more patent holders. This license does not release you
+ * from the requirement that you obtain separate licenses from these
+ * patent holders to use this software.
+ * - Use of the software either in source or binary form, must be run
+ * on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************/
+#ifndef AD9653_H_
+#define AD9653_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdint.h>
+#include "delay.h"
+#include "spi.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+#define AD9694_REG_GLOBAL_MAP_SPI_CONF_A						0x0000
+#define AD9694_REG_GLOBAL_MAP_SPI_CONF_B						0x0001
+#define AD9694_REG_CH_MAP_CHIP_CONF								0x0002
+#define AD9694_REG_PAIR_MAP_CHIP_TYPE							0x0003
+#define AD9694_REG_PAIR_MAP_CHIP_ID_LSB							0x0004
+#define AD9694_REG_PAIR_MAP_CHIP_GRADE							0x0006
+#define AD9694_REG_PAIR_MAP_DEV_INDEX							0x0008
+#define AD9694_REG_GLOBAL_MAP_PAIR_INDEX						0x0009
+#define AD9694_REG_PAIR_MAP_SCRATCH_PAD							0x000A
+#define AD9694_REG_PAIR_MAP_SPI_REVISION						0x000B
+#define AD9694_REG_PAIR_MAP_VENDOR_ID_LSB						0x000C
+#define AD9694_REG_PAIR_MAP_VENDOR_ID_MSB						0x000D
+#define AD9694_REG_CH_MAP_CHIP_PD_PIN							0x003F
+#define AD9694_REG_PAIR_MAP_CHIP_PIN_CTRL_1						0x0040
+#define AD9694_REG_PAIR_MAP_CLK_DIV_CTRL						0x0108
+#define AD9694_REG_CH_MAP_CLK_DIV_PHASE							0x0109
+#define AD9694_REG_PAIR_MAP_CLK_DIV_SYSREF_CTRL					0x010A
+#define AD9694_REG_PAIR_MAP_CLK_DELAY_CTRL						0x0110
+#define AD9694_REG_CH_MAP_CLK_SUPER_FINE_DELAY					0x0111
+#define AD9694_REG_CH_MAP_CLK_FINE_DELAY						0x0112
+#define AD9694_REG_CLK_DETN_CTRL								0x011A
+#define AD9694_REG_PAIR_MAP_CLK_STAT							0x011B
+#define AD9694_REG_CLK_DCS_CTRL_1								0x011C
+#define AD9694_REG_CLK_DCS_CTRL_2								0x011E
+#define AD9694_REG_CLK_DCS_CTRL_3								0x011F
+#define AD9694_REG_PAIR_MAP_SYSREF_CTRL_1						0x0120
+#define AD9694_REG_PAIR_MAP_SYSREF_CTRL_2						0x0121
+#define AD9694_REG_PAIR_MAP_SYSREF_CTRL_4						0x0123
+#define AD9694_REG_PAIR_MAP_SYSREF_STAT_1						0x0128
+#define AD9694_REG_PAIR_MAP_SYSREF_STAT_2						0x0129
+#define AD9694_REG_PAIR_MAP_SYSREF_STAT_3						0x012A
+#define AD9694_REG_PAIR_MAP_CHIP_SYNC							0x01FF
+#define AD9694_REG_PAIR_MAP_CHIP_MODE							0x0200
+#define AD9694_REG_PAIR_MAP_CHIP_DEC_RATIO						0x0201
+#define AD9694_REG_CH_MAP_CUSTOM_OFFSET							0x0228
+#define AD9694_REG_CH_MAP_FD_CTRL								0x0245
+#define AD9694_REG_CH_MAP_FD_UT_LSB								0x0247
+#define AD9694_REG_CH_MAP_FD_UT_MSB								0x0248
+#define AD9694_REG_CH_MAP_FD_LT_LSB								0x0249
+#define AD9694_REG_CH_MAP_FD_LT_MSB								0x024A
+#define AD9694_REG_CH_MAP_FD_DWELL_TIME_LSB						0x024B
+#define AD9694_REG_CH_MAP_FD_DWELL_TIME_MSB						0x024C
+#define AD9694_REG_PAIR_MAP_SIG_MON_SYNC_CTRL					0x026F
+#define AD9694_REG_CH_MAP_SIG_MON_CTRL							0x0270
+#define AD9694_REG_CH_MAP_SIG_MON_PERIOD_0						0x0271
+#define AD9694_REG_CH_MAP_SIG_MON_PERIOD_1						0x0272
+#define AD9694_REG_CH_MAP_SIG_MON_PERIOD_2						0x0273
+#define AD9694_REG_CH_MAP_SIG_MON_STAT_CTRL						0x0274
+#define AD9694_REG_CH_MAP_SIG_MON_STAT_0						0x0275
+#define AD9694_REG_CH_MAP_SIG_MON_STAT_1						0x0276
+#define AD9694_REG_CH_MAP_SIG_MON_STAT_2						0x0277
+#define AD9694_REG_CH_MAP_SIG_MON_STAT_FRAME_CNT				0x0278
+#define AD9694_REG_CH_MAP_SIG_MON_SERIAL_FRAMER_CTRL			0x0279
+#define AD9694_REG_SPORT_OVER_JESD204B_INPUT_SEL				0x027A
+#define AD9694_REG_PAIR_MAP_DDC_SYNC_CTRL						0x0300
+#define AD9694_REG_PAIR_MAP_DDC_0_CTRL							0x0310
+#define AD9694_REG_PAIR_MAP_DDC_0_INPUT_SEL						0x0311
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_0					0x0314
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_1					0x0315
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_2					0x0316
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_3					0x0317
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_4					0x0318
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_5					0x031A
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_0				0x031D
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_1				0x031E
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_2				0x031F
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_3				0x0320
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_4				0x0321
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_5				0x0322
+#define AD9694_REG_PAIR_MAP_DDC_0_TEST_ENABLE					0x0327
+#define AD9694_REG_PAIR_MAP_DDC_1_CTRL							0x0330
+#define AD9694_REG_PAIR_MAP_DDC_1_INPUT_SEL						0x0331
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_0					0x0334
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_1					0x0335
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_2					0x0336
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_3					0x0337
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_4					0x0338
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_5					0x033A
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_0				0x033D
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_1				0x033E
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_2				0x033F
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_3				0x0340
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_4				0x0341
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_5				0x0342
+#define AD9694_REG_PAIR_MAP_DDC_1_TEST_ENABLE					0x0347
+#define AD9694_REG_CH_MAP_TEST_MODE_CTRL						0x0550
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_1_LSB					0x0551
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_1_MSB					0x0552
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_2_LSB					0x0553
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_2_MSB					0x0554
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_3_LSB					0x0555
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_3_MSB					0x0556
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_4_LSB					0x0557
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_4_MSB					0x0558
+#define AD9694_REG_PAIR_MAP_OUTPUT_CTRL_MODE_0					0x0559
+#define AD9694_REG_PAIR_MAP_OUTPUT_CTRL_MODE_1					0x055A
+#define AD9694_REG_PAIR_MAP_OUTPUT_SAMPLE_MODE					0x0561
+#define AD9694_REG_PAIR_MAP_OUTPUT_CH_SEL						0x0564
+#define AD9694_REG_JESD204B_MAP_PLL_CTRL						0x056E
+#define AD9694_REG_JESD204B_MAP_PLL_STAT						0x056F
+#define AD9694_REG_JESD204B_MAP_JTX_QUICK_CONF					0x0570
+#define AD9694_REG_JESD204B_MAP_JTX_LINK_CTRL_1					0x0571
+#define AD9694_REG_JESD204B_MAP_JTX_LINK_CTRL_2					0x0572
+#define AD9694_REG_JESD204B_MAP_JTX_LINK_CTRL_3					0x0573
+#define AD9694_REG_JESD204B_MAP_JTX_LINK_CTRL_4					0x0574
+#define AD9694_REG_JESD204B_MAP_JTX_LMFC_OFFSET					0x0578
+#define AD9694_REG_JESD204B_MAP_JTX_DID_CONF					0x0580
+#define AD9694_REG_JESD204B_MAP_JTX_BID_CONF					0x0581
+#define AD9694_REG_JESD204B_MAP_JTX_LID_0_CONF					0x0583
+#define AD9694_REG_JESD204B_MAP_JTX_LID_1_CONF					0x0585
+#define AD9694_REG_JESD204B_MAP_JTX_SCR_L_CONF					0x058B
+#define AD9694_REG_JESD204B_MAP_JTX_F_CONF						0x058C
+#define AD9694_REG_JESD204B_MAP_JTX_K_CONF						0x058D
+#define AD9694_REG_JESD204B_MAP_JTX_M_CONF						0x058E
+#define AD9694_REG_JESD204B_MAP_JTX_CS_N_CONF					0x058F
+#define AD9694_REG_JESD204B_MAP_JTX_SUBCLASS_CONF				0x0590
+#define AD9694_REG_JESD204B_MAP_JTX_S_CONF						0x0591
+#define AD9694_REG_JESD204B_MAP_JTX_HD_CF_CONF					0x0592
+#define AD9694_REG_JESD204B_MAP_JTX_CHECKSUM_0_CONF				0x05A0
+#define AD9694_REG_JESD204B_MAP_JTX_CHECKSUM_1_CONF				0x05A1
+#define AD9694_REG_SERDOUTX0_SERDOUTX1_LANE_PD					0x05B0
+#define AD9694_REG_JESD204B_MAP_JTX_LANE_ASSIGN_1				0x05B2
+#define AD9694_REG_JESD204B_MAP_JTX_LANE_ASSIGN_2				0x05B3
+#define AD9694_REG_JESD204B_MAP_SERD_ADJUST_0					0x05C0
+#define AD9694_REG_JESD204B_MAP_SERD_ADJUST_1					0x05C1
+#define AD9694_REG_JESD204B_SER_PE_SEL_LANE_0					0x05C4
+#define AD9694_REG_JESD204B_SER_PE_SEL_LANE_1					0x05C6
+#define AD9694_REG_LARGE_DITHER_CTRL							0x0922
+#define AD9694_REG_PLL_CAL										0x1222
+#define AD9694_REG_JESD204B_STARTUP_CIRCUIT_RST					0x1228
+#define AD9694_REG_PLL_LOSS_OF_LOCK_CTRL						0x1262
+#define AD9694_REG_DC_OFFSET_CAL_CTRL							0x0701
+#define AD9694_REG_DC_OFFSET_CAL_CTRL_2							0x073B
+#define AD9694_REG_PAIR_MAP_VREF_CTRL							0x18A6
+#define AD9694_REG_EXT_VCM_BUF_CTRL_1							0x18E0
+#define AD9694_REG_EXT_VCM_BUF_CTRL_2							0x18E1
+#define AD9694_REG_EXT_VCM_BUF_CTRL_3							0x18E2
+#define AD9694_REG_EXT_VCM_BUF_CTRL								0x18E3
+#define AD9694_REG_TEMP_DIODE_EXPORT							0x18E6
+#define AD9694_REG_CH_MAP_ANALOG_INPUT_CTRL						0x1908
+#define AD9694_REG_CH_MAP_INPUT_FULLSCALE_RANGE					0x1910
+#define AD9694_REG_CH_MAP_BUF_CTRL_1							0x1A4C
+#define AD9694_REG_CH_MAP_BUF_CTRL_2							0x1A4D
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+struct ad9653_dev {
+	/* SPI */
+	struct spi_desc	*spi_desc;
+	struct gpio_desc *gpio_desc_pdwn;
+};
+
+struct ad9653_init_param {
+	/* SPI */
+	struct spi_init_param *spi_init;
+	struct gpio_init_param *gpio_pdwn;
+};
+
+struct ad9653_config {
+	uint16_t addr;
+	uint8_t value;
+};
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+
+int32_t ad9653_read(struct ad9653_dev *dev,
+			uint16_t reg_addr,
+			uint8_t *reg_data);
+
+int32_t ad9653_write(struct ad9653_dev *dev,
+			 uint16_t reg_addr,
+			 uint8_t reg_data);
+
+int32_t ad9653_init(struct ad9653_dev **device,
+		     const struct ad9653_init_param *init_param);
+
+int32_t ad9653_remove(struct ad9653_dev *dev);
+
+#endif
@@ -0,0 +1,128 @@
+/***************************************************************************//**
+ * @file ad9694.c
+ * @brief Implementation of AD9680 Driver.
+ * @author DBogdan ([email protected])
+ ********************************************************************************
+ * Copyright 2014-2016(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Analog Devices, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * - The use of this software may or may not infringe the patent rights
+ * of one or more patent holders. This license does not release you
+ * from the requirement that you obtain separate licenses from these
+ * patent holders to use this software.
+ * - Use of the software either in source or binary form, must be run
+ * on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdlib.h>
+#include <stdio.h>
+#include "ad9694.h"
+#include "../../../include/error.h"
+
+/***************************************************************************//**
+ * @brief ad9694_read
+ *******************************************************************************/
+int32_t ad9694_read(struct ad9694_dev *dev,
+			uint16_t reg_addr,
+			uint8_t *reg_data)
+{
+	uint8_t tx_buf[2];
+	uint8_t rx_buf[1];
+	int32_t ret;
+
+	tx_buf[0] = 0x80 | (reg_addr >> 8);
+	tx_buf[1] = reg_addr & 0xFF;
+	
+
+	ret = spi_write_and_read_3wire(dev->spi_desc,
+			tx_buf, rx_buf, 2, 1);
+
+	*reg_data = rx_buf[0];
+
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief ad9694_write
+ *******************************************************************************/
+int32_t ad9694_write(struct ad9694_dev *dev,
+			 uint16_t reg_addr,
+			 uint8_t reg_data)
+{
+	uint8_t buf[3];
+
+	int32_t ret;
+
+	buf[0] = reg_addr >> 8;
+	buf[1] = reg_addr & 0xFF;
+	buf[2] = reg_data;
+
+	ret = spi_write_and_read_3wire(dev->spi_desc,
+				 buf, NULL, 3, 0);
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief ad9694_init
+ *******************************************************************************/
+int32_t ad9694_init(struct ad9694_dev **device,
+		     const struct ad9694_init_param *init_param)
+{
+	int ret = SUCCESS;
+	struct ad9694_dev *dev;
+
+	dev = (struct ad9694_dev *)malloc(sizeof(*dev));
+	if (!dev)
+		return FAILURE;
+
+	/* SPI */
+	ret = spi_init(&dev->spi_desc, init_param->spi_init);
+
+	*device = dev;
+
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief Free the resources allocated by ad9694_setup().
+ *
+ * @param dev - The device structure.
+ *
+ * @return SUCCESS in case of success, negative error code otherwise.
+*******************************************************************************/
+int32_t ad9694_remove(struct ad9694_dev *dev)
+{
+	int32_t ret;
+
+	ret = spi_remove(dev->spi_desc);
+
+	free(dev);
+
+	return ret;
+}
@@ -0,0 +1,231 @@
+/***************************************************************************//**
+ * @file ad9694.h
+ * @brief Header file of AD9694 Driver.
+ * @author DBogdan ([email protected])
+ ********************************************************************************
+ * Copyright 2014-2016(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Analog Devices, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * - The use of this software may or may not infringe the patent rights
+ * of one or more patent holders. This license does not release you
+ * from the requirement that you obtain separate licenses from these
+ * patent holders to use this software.
+ * - Use of the software either in source or binary form, must be run
+ * on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************/
+#ifndef AD9694_H_
+#define AD9694_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdint.h>
+#include "delay.h"
+#include "spi.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+#define AD9694_REG_GLOBAL_MAP_SPI_CONF_A						0x0000
+#define AD9694_REG_GLOBAL_MAP_SPI_CONF_B						0x0001
+#define AD9694_REG_CH_MAP_CHIP_CONF								0x0002
+#define AD9694_REG_PAIR_MAP_CHIP_TYPE							0x0003
+#define AD9694_REG_PAIR_MAP_CHIP_ID_LSB							0x0004
+#define AD9694_REG_PAIR_MAP_CHIP_GRADE							0x0006
+#define AD9694_REG_PAIR_MAP_DEV_INDEX							0x0008
+#define AD9694_REG_GLOBAL_MAP_PAIR_INDEX						0x0009
+#define AD9694_REG_PAIR_MAP_SCRATCH_PAD							0x000A
+#define AD9694_REG_PAIR_MAP_SPI_REVISION						0x000B
+#define AD9694_REG_PAIR_MAP_VENDOR_ID_LSB						0x000C
+#define AD9694_REG_PAIR_MAP_VENDOR_ID_MSB						0x000D
+#define AD9694_REG_CH_MAP_CHIP_PD_PIN							0x003F
+#define AD9694_REG_PAIR_MAP_CHIP_PIN_CTRL_1						0x0040
+#define AD9694_REG_PAIR_MAP_CLK_DIV_CTRL						0x0108
+#define AD9694_REG_CH_MAP_CLK_DIV_PHASE							0x0109
+#define AD9694_REG_PAIR_MAP_CLK_DIV_SYSREF_CTRL					0x010A
+#define AD9694_REG_PAIR_MAP_CLK_DELAY_CTRL						0x0110
+#define AD9694_REG_CH_MAP_CLK_SUPER_FINE_DELAY					0x0111
+#define AD9694_REG_CH_MAP_CLK_FINE_DELAY						0x0112
+#define AD9694_REG_CLK_DETN_CTRL								0x011A
+#define AD9694_REG_PAIR_MAP_CLK_STAT							0x011B
+#define AD9694_REG_CLK_DCS_CTRL_1								0x011C
+#define AD9694_REG_CLK_DCS_CTRL_2								0x011E
+#define AD9694_REG_CLK_DCS_CTRL_3								0x011F
+#define AD9694_REG_PAIR_MAP_SYSREF_CTRL_1						0x0120
+#define AD9694_REG_PAIR_MAP_SYSREF_CTRL_2						0x0121
+#define AD9694_REG_PAIR_MAP_SYSREF_CTRL_4						0x0123
+#define AD9694_REG_PAIR_MAP_SYSREF_STAT_1						0x0128
+#define AD9694_REG_PAIR_MAP_SYSREF_STAT_2						0x0129
+#define AD9694_REG_PAIR_MAP_SYSREF_STAT_3						0x012A
+#define AD9694_REG_PAIR_MAP_CHIP_SYNC							0x01FF
+#define AD9694_REG_PAIR_MAP_CHIP_MODE							0x0200
+#define AD9694_REG_PAIR_MAP_CHIP_DEC_RATIO						0x0201
+#define AD9694_REG_CH_MAP_CUSTOM_OFFSET							0x0228
+#define AD9694_REG_CH_MAP_FD_CTRL								0x0245
+#define AD9694_REG_CH_MAP_FD_UT_LSB								0x0247
+#define AD9694_REG_CH_MAP_FD_UT_MSB								0x0248
+#define AD9694_REG_CH_MAP_FD_LT_LSB								0x0249
+#define AD9694_REG_CH_MAP_FD_LT_MSB								0x024A
+#define AD9694_REG_CH_MAP_FD_DWELL_TIME_LSB						0x024B
+#define AD9694_REG_CH_MAP_FD_DWELL_TIME_MSB						0x024C
+#define AD9694_REG_PAIR_MAP_SIG_MON_SYNC_CTRL					0x026F
+#define AD9694_REG_CH_MAP_SIG_MON_CTRL							0x0270
+#define AD9694_REG_CH_MAP_SIG_MON_PERIOD_0						0x0271
+#define AD9694_REG_CH_MAP_SIG_MON_PERIOD_1						0x0272
+#define AD9694_REG_CH_MAP_SIG_MON_PERIOD_2						0x0273
+#define AD9694_REG_CH_MAP_SIG_MON_STAT_CTRL						0x0274
+#define AD9694_REG_CH_MAP_SIG_MON_STAT_0						0x0275
+#define AD9694_REG_CH_MAP_SIG_MON_STAT_1						0x0276
+#define AD9694_REG_CH_MAP_SIG_MON_STAT_2						0x0277
+#define AD9694_REG_CH_MAP_SIG_MON_STAT_FRAME_CNT				0x0278
+#define AD9694_REG_CH_MAP_SIG_MON_SERIAL_FRAMER_CTRL			0x0279
+#define AD9694_REG_SPORT_OVER_JESD204B_INPUT_SEL				0x027A
+#define AD9694_REG_PAIR_MAP_DDC_SYNC_CTRL						0x0300
+#define AD9694_REG_PAIR_MAP_DDC_0_CTRL							0x0310
+#define AD9694_REG_PAIR_MAP_DDC_0_INPUT_SEL						0x0311
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_0					0x0314
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_1					0x0315
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_2					0x0316
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_3					0x0317
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_4					0x0318
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_INC_5					0x031A
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_0				0x031D
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_1				0x031E
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_2				0x031F
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_3				0x0320
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_4				0x0321
+#define AD9694_REG_PAIR_MAP_DDC_0_PHASE_OFFSET_5				0x0322
+#define AD9694_REG_PAIR_MAP_DDC_0_TEST_ENABLE					0x0327
+#define AD9694_REG_PAIR_MAP_DDC_1_CTRL							0x0330
+#define AD9694_REG_PAIR_MAP_DDC_1_INPUT_SEL						0x0331
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_0					0x0334
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_1					0x0335
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_2					0x0336
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_3					0x0337
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_4					0x0338
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_INC_5					0x033A
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_0				0x033D
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_1				0x033E
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_2				0x033F
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_3				0x0340
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_4				0x0341
+#define AD9694_REG_PAIR_MAP_DDC_1_PHASE_OFFSET_5				0x0342
+#define AD9694_REG_PAIR_MAP_DDC_1_TEST_ENABLE					0x0347
+#define AD9694_REG_CH_MAP_TEST_MODE_CTRL						0x0550
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_1_LSB					0x0551
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_1_MSB					0x0552
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_2_LSB					0x0553
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_2_MSB					0x0554
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_3_LSB					0x0555
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_3_MSB					0x0556
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_4_LSB					0x0557
+#define AD9694_REG_PAIR_MAP_USER_PATTERN_4_MSB					0x0558
+#define AD9694_REG_PAIR_MAP_OUTPUT_CTRL_MODE_0					0x0559
+#define AD9694_REG_PAIR_MAP_OUTPUT_CTRL_MODE_1					0x055A
+#define AD9694_REG_PAIR_MAP_OUTPUT_SAMPLE_MODE					0x0561
+#define AD9694_REG_PAIR_MAP_OUTPUT_CH_SEL						0x0564
+#define AD9694_REG_JESD204B_MAP_PLL_CTRL						0x056E
+#define AD9694_REG_JESD204B_MAP_PLL_STAT						0x056F
+#define AD9694_REG_JESD204B_MAP_JTX_QUICK_CONF					0x0570
+#define AD9694_REG_JESD204B_MAP_JTX_LINK_CTRL_1					0x0571
+#define AD9694_REG_JESD204B_MAP_JTX_LINK_CTRL_2					0x0572
+#define AD9694_REG_JESD204B_MAP_JTX_LINK_CTRL_3					0x0573
+#define AD9694_REG_JESD204B_MAP_JTX_LINK_CTRL_4					0x0574
+#define AD9694_REG_JESD204B_MAP_JTX_LMFC_OFFSET					0x0578
+#define AD9694_REG_JESD204B_MAP_JTX_DID_CONF					0x0580
+#define AD9694_REG_JESD204B_MAP_JTX_BID_CONF					0x0581
+#define AD9694_REG_JESD204B_MAP_JTX_LID_0_CONF					0x0583
+#define AD9694_REG_JESD204B_MAP_JTX_LID_1_CONF					0x0585
+#define AD9694_REG_JESD204B_MAP_JTX_SCR_L_CONF					0x058B
+#define AD9694_REG_JESD204B_MAP_JTX_F_CONF						0x058C
+#define AD9694_REG_JESD204B_MAP_JTX_K_CONF						0x058D
+#define AD9694_REG_JESD204B_MAP_JTX_M_CONF						0x058E
+#define AD9694_REG_JESD204B_MAP_JTX_CS_N_CONF					0x058F
+#define AD9694_REG_JESD204B_MAP_JTX_SUBCLASS_CONF				0x0590
+#define AD9694_REG_JESD204B_MAP_JTX_S_CONF						0x0591
+#define AD9694_REG_JESD204B_MAP_JTX_HD_CF_CONF					0x0592
+#define AD9694_REG_JESD204B_MAP_JTX_CHECKSUM_0_CONF				0x05A0
+#define AD9694_REG_JESD204B_MAP_JTX_CHECKSUM_1_CONF				0x05A1
+#define AD9694_REG_SERDOUTX0_SERDOUTX1_LANE_PD					0x05B0
+#define AD9694_REG_JESD204B_MAP_JTX_LANE_ASSIGN_1				0x05B2
+#define AD9694_REG_JESD204B_MAP_JTX_LANE_ASSIGN_2				0x05B3
+#define AD9694_REG_JESD204B_MAP_SERD_ADJUST_0					0x05C0
+#define AD9694_REG_JESD204B_MAP_SERD_ADJUST_1					0x05C1
+#define AD9694_REG_JESD204B_SER_PE_SEL_LANE_0					0x05C4
+#define AD9694_REG_JESD204B_SER_PE_SEL_LANE_1					0x05C6
+#define AD9694_REG_LARGE_DITHER_CTRL							0x0922
+#define AD9694_REG_PLL_CAL										0x1222
+#define AD9694_REG_JESD204B_STARTUP_CIRCUIT_RST					0x1228
+#define AD9694_REG_PLL_LOSS_OF_LOCK_CTRL						0x1262
+#define AD9694_REG_DC_OFFSET_CAL_CTRL							0x0701
+#define AD9694_REG_DC_OFFSET_CAL_CTRL_2							0x073B
+#define AD9694_REG_PAIR_MAP_VREF_CTRL							0x18A6
+#define AD9694_REG_EXT_VCM_BUF_CTRL_1							0x18E0
+#define AD9694_REG_EXT_VCM_BUF_CTRL_2							0x18E1
+#define AD9694_REG_EXT_VCM_BUF_CTRL_3							0x18E2
+#define AD9694_REG_EXT_VCM_BUF_CTRL								0x18E3
+#define AD9694_REG_TEMP_DIODE_EXPORT							0x18E6
+#define AD9694_REG_CH_MAP_ANALOG_INPUT_CTRL						0x1908
+#define AD9694_REG_CH_MAP_INPUT_FULLSCALE_RANGE					0x1910
+#define AD9694_REG_CH_MAP_BUF_CTRL_1							0x1A4C
+#define AD9694_REG_CH_MAP_BUF_CTRL_2							0x1A4D
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+struct ad9694_dev {
+	/* SPI */
+	struct spi_desc	*spi_desc;
+};
+
+struct ad9694_init_param {
+	/* SPI */
+	struct spi_init_param	*spi_init;
+};
+
+struct ad9694_config {
+	uint16_t addr;
+	uint8_t value;
+};
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+
+int32_t ad9694_read(struct ad9694_dev *dev,
+			uint16_t reg_addr,
+			uint8_t *reg_data);
+
+int32_t ad9694_write(struct ad9694_dev *dev,
+			 uint16_t reg_addr,
+			 uint8_t reg_data);
+
+int32_t ad9694_init(struct ad9694_dev **device,
+		     const struct ad9694_init_param *init_param);
+
+int32_t ad9694_remove(struct ad9694_dev *dev);
+
+#endif
@@ -0,0 +1,241 @@
+/***************************************************************************//**
+ *   @file   gpio.c
+ *   @brief  Implementation of the GPIO Interface
+ *   @author Antoniu Miclaus ([email protected])
+********************************************************************************
+ * Copyright 2020(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+#include <inttypes.h>
+#include "gpio.h"
+#include <stdlib.h>
+#include "error.h"
+
+/******************************************************************************/
+/************************ Functions Definitions *******************************/
+/******************************************************************************/
+
+/**
+ * @brief Obtain the GPIO decriptor.
+ * @param desc - The GPIO descriptor.
+ * @param param - GPIO Initialization parameters.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t gpio_get(struct gpio_desc **desc,
+		       const struct gpio_init_param *param)
+{
+	int32_t ret;
+
+	if (!param || !param->platform_ops)
+		return -EINVAL;
+
+	if (!param->platform_ops->gpio_ops_get)
+		return -ENOSYS;
+
+	ret = param->platform_ops->gpio_ops_get(desc, param);
+	if (ret)
+		return ret;
+
+	(*desc)->platform_ops = param->platform_ops;
+
+	return 0;
+}
+
+/**
+ * @brief Get the value of an optional GPIO.
+ * @param desc - The GPIO descriptor.
+ * @param param - GPIO Initialization parameters.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t gpio_get_optional(struct gpio_desc **desc,
+				const struct gpio_init_param *param)
+{
+	int32_t ret;
+
+	if (!param || (param->number == -1)) {
+		*desc = NULL;
+		return 0;
+	}
+
+	if (!param->platform_ops)
+		return -EINVAL;
+
+	if (!param->platform_ops->gpio_ops_get_optional)
+		return -ENOSYS;
+
+	ret = param->platform_ops->gpio_ops_get_optional(desc, param);
+	if (ret)
+		return ret;
+
+	(*desc)->platform_ops = param->platform_ops;
+
+	return 0;
+}
+/**
+ * @brief Free the resources allocated by gpio_get().
+ * @param desc - The GPIO descriptor.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t gpio_remove(struct gpio_desc *desc)
+{
+	if (desc) {
+		if (!desc->platform_ops)
+			return -EINVAL;
+
+		if (!desc->platform_ops->gpio_ops_remove)
+			return -ENOSYS;
+
+		return desc->platform_ops->gpio_ops_remove(desc);
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Enable the input direction of the specified GPIO.
+ * @param desc - The GPIO descriptor.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t gpio_direction_input(struct gpio_desc *desc)
+{
+	if (desc) {
+		if (!desc->platform_ops)
+			return -EINVAL;
+
+		if (!desc->platform_ops->gpio_ops_direction_input)
+			return -ENOSYS;
+
+		return desc->platform_ops->gpio_ops_direction_input(desc);
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Enable the output direction of the specified GPIO.
+ * @param desc - The GPIO descriptor.
+ * @param value - The value.
+ *                Example: GPIO_HIGH
+ *                         GPIO_LOW
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t gpio_direction_output(struct gpio_desc *desc,
+				    uint8_t value)
+{
+	if (desc) {
+		if (!desc->platform_ops)
+			return -EINVAL;
+
+		if (!desc->platform_ops->gpio_ops_direction_output)
+			return -ENOSYS;
+
+		return desc->platform_ops->
+		       gpio_ops_direction_output(desc, value);
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Get the direction of the specified GPIO.
+ * @param desc - The GPIO descriptor.
+ * @param direction - The direction.
+ *                    Example: GPIO_OUT
+ *                             GPIO_IN
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t gpio_get_direction(struct gpio_desc *desc,
+				 uint8_t *direction)
+{
+	if (desc) {
+		if (!desc->platform_ops)
+			return -EINVAL;
+
+		if (!desc->platform_ops->gpio_ops_get_direction)
+			return -ENOSYS;
+
+		return desc->platform_ops->
+		       gpio_ops_get_direction(desc, direction);
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Set the value of the specified GPIO.
+ * @param desc - The GPIO descriptor.
+ * @param value - The value.
+ *                Example: GPIO_HIGH
+ *                         GPIO_LOW
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t gpio_set_value(struct gpio_desc *desc,
+			     uint8_t value)
+{
+	if (desc) {
+		if (!desc->platform_ops)
+			return -EINVAL;
+
+		if (!desc->platform_ops->gpio_ops_set_value)
+			return -ENOSYS;
+
+		return desc->platform_ops->gpio_ops_set_value(desc, value);
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Get the value of the specified GPIO.
+ * @param desc - The GPIO descriptor.
+ * @param value - The value.
+ *                Example: GPIO_HIGH
+ *                         GPIO_LOW
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t gpio_get_value(struct gpio_desc *desc,
+			     uint8_t *value)
+{
+	if (desc) {
+		if (!desc->platform_ops)
+			return -EINVAL;
+
+		if (!desc->platform_ops->gpio_ops_set_value)
+			return -ENOSYS;
+
+		return desc->platform_ops->gpio_ops_get_value(desc, value);
+	}
+
+	return 0;
+}
@@ -0,0 +1,135 @@
+/***************************************************************************//**
+ *   @file   i2c.c
+ *   @brief  Implementation of the I2C Interface
+ *   @author Antoniu Miclaus ([email protected])
+********************************************************************************
+ * Copyright 2020(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+#include <inttypes.h>
+#include "i2c.h"
+#include <stdlib.h>
+#include "error.h"
+
+/**
+ * @brief Initialize the I2C communication peripheral.
+ * @param desc - The I2C descriptor.
+ * @param param - The structure that contains the I2C parameters.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t i2c_init(struct i2c_desc **desc,
+		       const struct i2c_init_param *param)
+{
+	int32_t ret;
+
+	if (!param || !param->platform_ops)
+		return -EINVAL;
+
+	if (!param->platform_ops->i2c_ops_init)
+		return -ENOSYS;
+
+	ret = param->platform_ops->i2c_ops_init(desc, param);
+	if (ret)
+		return ret;
+
+	(*desc)->platform_ops = param->platform_ops;
+
+	return 0;
+}
+
+/**
+ * @brief Free the resources allocated by i2c_init().
+ * @param desc - The I2C descriptor.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t i2c_remove(struct i2c_desc *desc)
+{
+	if (!desc || !desc->platform_ops)
+		return -EINVAL;
+
+	if (!desc->platform_ops->i2c_ops_remove)
+		return -ENOSYS;
+
+	return desc->platform_ops->i2c_ops_remove(desc);
+}
+
+/**
+ * @brief I2C Write data to slave device.
+ * @param desc - The I2C descriptor.
+ * @param data - The buffer with the transmitted/received data.
+ * @param bytes_number - Number of bytes to write.
+ * @param stop_bit - Stop conditional control.
+ *                   Example: 0 - A stop condition will not be generated.
+ *                            1 - A stop condition will be generated.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t i2c_write(struct i2c_desc *desc,
+			uint8_t *data,
+			uint8_t bytes_number,
+			uint8_t stop_bit)
+{
+	if (!desc || !desc->platform_ops)
+		return -EINVAL;
+
+	if (!desc->platform_ops->i2c_ops_write)
+		return -ENOSYS;
+
+	return desc->platform_ops->i2c_ops_write(desc, data, bytes_number,
+			stop_bit);
+}
+
+/**
+ * @brief I2C Read data from slave device.
+ * @param desc - The i2c descriptor.
+ * @param data - The buffer with the transmitted/received data.
+ * @param bytes_number - Number of bytes to read.
+ * @param stop_bit - Stop conditional control.
+ *                   Example: 0 - A stop condition will not be generated.
+ *                            1 - A stop condition will be generated.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t i2c_read(struct i2c_desc *desc,
+		       uint8_t *data,
+		       uint8_t bytes_number,
+		       uint8_t stop_bit)
+{
+	if (!desc || !desc->platform_ops)
+		return -EINVAL;
+
+	if (!desc->platform_ops->i2c_ops_read)
+		return -ENOSYS;
+
+	return desc->platform_ops->i2c_ops_read(desc, data, bytes_number,
+						stop_bit);
+}
@@ -0,0 +1,161 @@
+/***************************************************************************//**
+ *   @file   spi.c
+ *   @brief  Implementation of the SPI Interface
+ *   @author Antoniu Miclaus ([email protected])
+********************************************************************************
+ * Copyright 2020(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+#include <inttypes.h>
+#include "spi.h"
+#include <stdlib.h>
+#include "error.h"
+
+/**
+ * @brief Initialize the SPI communication peripheral.
+ * @param desc - The SPI descriptor.
+ * @param param - The structure that contains the SPI parameters.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t spi_init(struct spi_desc **desc,
+		       const struct spi_init_param *param)
+{
+	int32_t ret;
+
+	if (!param || !param->platform_ops)
+		return -EINVAL;
+
+	if (!param->platform_ops->init)
+		return -ENOSYS;
+
+	ret = param->platform_ops->init(desc, param);
+	if (ret)
+		return ret;
+
+	(*desc)->platform_ops = param->platform_ops;
+	(*desc)->parent = param->parent;
+
+	return 0;
+}
+
+/**
+ * @brief Free the resources allocated by spi_init().
+ * @param desc - The SPI descriptor.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t spi_remove(struct spi_desc *desc)
+{
+	if (!desc || !desc->platform_ops)
+		return -EINVAL;
+
+	if (!desc->platform_ops->remove)
+		return -ENOSYS;
+
+	return desc->platform_ops->remove(desc);
+}
+
+/**
+ * @brief Write and read data to/from SPI.
+ * @param desc - The SPI descriptor.
+ * @param data - The buffer with the transmitted/received data.
+ * @param bytes_number - Number of bytes to write/read.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t spi_write_and_read(struct spi_desc *desc,
+				 uint8_t *data,
+				 uint16_t bytes_number)
+{
+	if (!desc || !desc->platform_ops)
+		return -EINVAL;
+
+	if (!desc->platform_ops->write_and_read)
+		return -ENOSYS;
+
+	return desc->platform_ops->write_and_read(desc, data, bytes_number);
+}
+
+/**
+ * @brief Write and read data to/from SPI in 3 wire mode.
+ * @param desc - The SPI descriptor.
+ * @param write_data - The buffer with the transmitted data.
+ * @param read_data - The buffer with the received data.
+ * @param write_bytes_number - Number of bytes to write.
+ * @param read_bytes_number - Number of bytes to read.
+ * @return SUCCESS in case of success, FAILURE otherwise.
+ */
+int32_t spi_write_and_read_3wire(struct spi_desc *desc,
+			   uint8_t *write_data,
+			   uint8_t *read_data,
+			   uint16_t write_bytes_number,
+			   uint16_t read_bytes_number)
+{
+	if (!desc || !desc->platform_ops)
+		return -EINVAL;
+
+	if (!desc->platform_ops->write_and_read_3wire)
+		return -ENOSYS;
+	return desc->platform_ops->write_and_read_3wire(desc, write_data, read_data,
+			write_bytes_number, read_bytes_number);
+}
+/**
+ * @brief  Iterate over head list and send all spi messages
+ * @param desc - The SPI descriptor.
+ * @param msgs - Array of messages.
+ * @param len - Number of messages in the array.
+ * @return 0 in case of success, negativ error code otherwise.
+ */
+int32_t spi_transfer(struct spi_desc *desc,
+			   struct spi_msg *msgs,
+			   uint32_t len)
+{
+	int32_t  ret;
+	uint32_t i;
+
+	if (!desc || !desc->platform_ops)
+		return -EINVAL;
+
+	if (desc->platform_ops->transfer)
+		return desc->platform_ops->transfer(desc, msgs, len);
+
+	for (i = 0; i < len; i++) {
+		if (msgs[i].rx_buff != msgs[i].tx_buff || !msgs[i].tx_buff)
+			return -EINVAL;
+		ret = spi_write_and_read(desc, msgs[i].rx_buff,
+					       msgs[i].bytes_number);
+		if (IS_ERR_VALUE(ret))
+			return ret;
+	}
+
+	return 0;
+}
@@ -0,0 +1,547 @@
+/*******************************************************************************
+ *   @file   axi_dmac.c
+ *   @brief  Driver for the Analog Devices AXI-DMAC core.
+ *   @author DBogdan ([email protected])
+********************************************************************************
+ * Copyright 2018(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include "axi_io.h"
+#include "error.h"
+#include "delay.h"
+#include "axi_dmac.h"
+
+/*******************************************************************************
+ * @brief ISR for dev to mem DMA transfer. It computes the next transfer params,
+ *			if any, and sets the transfer structure fields accordingly.
+ *
+ * @param instance - the instance that triggered the ISR.
+ *
+ * @return None.
+*******************************************************************************/
+void axi_dmac_dev_to_mem_isr(void *instance)
+{
+	struct axi_dmac *dmac = (struct axi_dmac *)instance;
+	uint32_t burst_size;
+	uint32_t reg_val;
+
+	/* Get interrupt sources and clear interrupts. */
+	axi_dmac_read(dmac, AXI_DMAC_REG_IRQ_PENDING, &reg_val);
+	axi_dmac_write(dmac, AXI_DMAC_REG_IRQ_PENDING, reg_val);
+
+	if (reg_val & AXI_DMAC_IRQ_SOT) {
+		if (dmac->remaining_size) {
+			/* See if remaining size is bigger than max transfer size and
+			 * set burst size. */
+			if (dmac->remaining_size > dmac->max_length) {
+				burst_size = dmac->max_length;
+			} else {
+				burst_size = dmac->remaining_size - 1;
+			}
+
+			/* The current transfer was started; set up the new one. */
+			axi_dmac_write(dmac, AXI_DMAC_REG_DEST_ADDRESS, dmac->next_dest_addr);
+			axi_dmac_write(dmac, AXI_DMAC_REG_DEST_STRIDE, 0x0);
+			axi_dmac_write(dmac, AXI_DMAC_REG_X_LENGTH, burst_size);
+			axi_dmac_write(dmac, AXI_DMAC_REG_Y_LENGTH, 0x0);
+
+			/* Compute size of the next transfer. */
+			dmac->remaining_size = dmac->remaining_size - (burst_size + 1);
+			/* Address must advance with +1 since the DMAC writes X_LENGTH+1. */
+			dmac->next_dest_addr = dmac->next_dest_addr + (burst_size + 1);
+
+			/* Trigger the next transfer. */
+			axi_dmac_write(dmac, AXI_DMAC_REG_TRANSFER_SUBMIT, AXI_DMAC_TRANSFER_SUBMIT);
+		}
+	}
+	if (reg_val & AXI_DMAC_IRQ_EOT) {
+		if (!dmac->remaining_size) {
+			dmac->transfer.transfer_done = true;
+			dmac->next_dest_addr = 0;
+		}
+	}
+}
+
+/*******************************************************************************
+ * @brief ISR for mem DMA to dev transfer. It computes the next transfer params,
+ *			if any, and sets the transfer structure fields accordingly.
+ *
+ * @param instance - the instance that triggered the ISR.
+ *
+ * @return None.
+*******************************************************************************/
+void axi_dmac_mem_to_dev_isr(void *instance)
+{
+	struct axi_dmac *dmac = (struct axi_dmac *)instance;
+	uint32_t burst_size;
+	uint32_t reg_val;
+
+	/* Get interrupt sources and clear interrupts. */
+	axi_dmac_read(dmac, AXI_DMAC_REG_IRQ_PENDING, &reg_val);
+	axi_dmac_write(dmac, AXI_DMAC_REG_IRQ_PENDING, reg_val);
+
+	if (reg_val & AXI_DMAC_IRQ_SOT) {
+		if ((dmac->transfer.cyclic == CYCLIC) &&
+		    (dmac->next_src_addr >= (dmac->init_addr + dmac->transfer.size - 1))) {
+			dmac->remaining_size = dmac->transfer.size;
+			dmac->next_src_addr = dmac->init_addr;
+		}
+
+		if (dmac->remaining_size) {
+			/** See if remaining size is bigger than max transfer size and
+			 * set burst size. */
+			if (dmac->remaining_size > dmac->max_length) {
+				burst_size = dmac->max_length;
+			} else {
+				burst_size = dmac->remaining_size - 1;
+			}
+
+			/* The current transfer was started; set up the new one. */
+			axi_dmac_write(dmac, AXI_DMAC_REG_SRC_ADDRESS, dmac->next_src_addr);
+			axi_dmac_write(dmac, AXI_DMAC_REG_SRC_STRIDE, 0x0);
+			axi_dmac_write(dmac, AXI_DMAC_REG_X_LENGTH, burst_size);
+			axi_dmac_write(dmac, AXI_DMAC_REG_Y_LENGTH, 0x0);
+
+			/* Compute parameters for the next transfer. */
+			dmac->remaining_size = dmac->remaining_size - (burst_size + 1);
+			/* Address must advance with +1 since the DMAC writes X_LENGTH+1. */
+			dmac->next_src_addr = dmac->next_src_addr + (burst_size + 1);
+
+			/* Trigger the current transfer */
+			axi_dmac_write(dmac, AXI_DMAC_REG_TRANSFER_SUBMIT, AXI_DMAC_TRANSFER_SUBMIT);
+		}
+	}
+	if (reg_val & AXI_DMAC_IRQ_EOT) {
+		if ((!dmac->remaining_size) && (dmac->transfer.cyclic != CYCLIC)) {
+			dmac->transfer.transfer_done = true;
+			dmac->next_src_addr = 0;
+		}
+	}
+}
+
+/*******************************************************************************
+ * @brief ISR for mem DMA to mem DMA transfer. It computes the next transfer
+ *			params, if any, and sets the transfer structure fields accordingly.
+ *
+ * @param instance - the instance that triggered the ISR.
+ *
+ * @return None.
+*******************************************************************************/
+void axi_dmac_mem_to_mem_isr(void *instance)
+{
+	struct axi_dmac *dmac = (struct axi_dmac *)instance;
+	uint32_t burst_size;
+	uint32_t reg_val;
+
+	/* Get interrupt sources and clear interrupts. */
+	axi_dmac_read(dmac, AXI_DMAC_REG_IRQ_PENDING, &reg_val);
+	axi_dmac_write(dmac, AXI_DMAC_REG_IRQ_PENDING, reg_val);
+
+	if (reg_val & AXI_DMAC_IRQ_SOT) {
+		if (dmac->remaining_size) {
+			/** See if remaining size is bigger than max transfer size and
+			 * set burst size. */
+			if (dmac->remaining_size > dmac->max_length) {
+				burst_size = dmac->max_length;
+			} else {
+				burst_size = dmac->remaining_size - 1;
+			}
+
+			/* The current transfer was started; set up the new one. */
+			axi_dmac_write(dmac, AXI_DMAC_REG_SRC_ADDRESS, dmac->next_src_addr);
+			axi_dmac_write(dmac, AXI_DMAC_REG_SRC_STRIDE, 0x0);
+			axi_dmac_write(dmac, AXI_DMAC_REG_DEST_ADDRESS, dmac->next_dest_addr);
+			axi_dmac_write(dmac, AXI_DMAC_REG_DEST_STRIDE, 0x0);
+			axi_dmac_write(dmac, AXI_DMAC_REG_X_LENGTH, burst_size);
+			axi_dmac_write(dmac, AXI_DMAC_REG_Y_LENGTH, 0x0);
+
+			/* Compute parameters for the next transfer. */
+			dmac->remaining_size = dmac->remaining_size - (burst_size + 1);
+			/* Address must advance with +1 since the DMAC writes X_LENGTH+1. */
+			dmac->next_src_addr = dmac->next_src_addr + (burst_size + 1);
+			dmac->next_dest_addr = dmac->next_dest_addr + (burst_size + 1);
+
+			/* If transfer finished advance src address so that transfer_done can be set*/
+			if (!dmac->remaining_size) {
+				dmac->next_src_addr = dmac->next_src_addr + (burst_size + 1);
+			}
+
+			/* Trigger the current transfer */
+			axi_dmac_write(dmac, AXI_DMAC_REG_TRANSFER_SUBMIT, AXI_DMAC_TRANSFER_SUBMIT);
+		}
+	}
+	if (reg_val & AXI_DMAC_IRQ_EOT) {
+		if (!dmac->remaining_size) {
+			if(dmac->next_src_addr > (dmac->init_addr + dmac->transfer.size)) {
+				dmac->transfer.transfer_done = true;
+				dmac->next_src_addr = 0;
+				dmac->next_dest_addr = 0;
+			}
+		}
+	}
+}
+
+/*******************************************************************************
+ * @brief Wrapper for AXI IO through UIO/devmem read function.
+ *
+ * @param dmac - DMAC istance containing UIO index (/dev/uioX)/base address.
+ * @param reg_addr - Address to read from.
+ * @param reg_data - Location where read data will be stored.
+ *
+ * @return 0 - success.
+*******************************************************************************/
+int32_t axi_dmac_read(struct axi_dmac *dmac,
+		      uint32_t reg_addr,
+		      uint32_t *reg_data)
+{
+	axi_io_read(dmac->base, reg_addr, reg_data);
+
+	return 0;
+}
+
+/*******************************************************************************
+ * @brief Wrapper for AXI IO through UIO/devmem wrrite function.
+ *
+ * @param dmac - DMAC istance containing UIO index (/dev/uioX)/base address.
+ * @param reg_addr - Address to write to.
+ * @param reg_data - Data to be written.
+ *
+ * @return 0 - success.
+*******************************************************************************/
+int32_t axi_dmac_write(struct axi_dmac *dmac,
+		       uint32_t reg_addr,
+		       uint32_t reg_data)
+{
+	axi_io_write(dmac->base, reg_addr, reg_data);
+
+	return 0;
+}
+
+/*******************************************************************************
+ * @brief Get transfer status (value of dmac->transfer.transfer_done flag).
+ *
+ * @note This function should not be used if DMA IRQ is not used.
+ *
+ * @param dmac - DMAC istance.
+ * @param rdy - Transfer status (0 - not ready, 1 - ready).
+ *
+ * @return 0 - success.
+*******************************************************************************/
+int32_t axi_dmac_is_transfer_ready(struct axi_dmac *dmac, bool *rdy)
+{
+	*rdy = dmac->transfer.transfer_done;
+
+	return 0;
+}
+
+/*******************************************************************************
+ * @brief Get DMAC capabilities.
+ *
+ * @param dmac - DMAC istance.
+ *
+ * @return 0 for success, -1 in case of failure.
+*******************************************************************************/
+static int32_t axi_dmac_detect_caps(struct axi_dmac *dmac)
+{
+	uint32_t reg_val, initial_reg_val = 0;
+	uint32_t src_mem_mapped = 0;
+	uint32_t dest_mem_mapped = 0;
+
+	dmac->max_length = -1;
+	dmac->direction = INVALID_DIR;
+
+	/* Check if HW cyclic possible */
+	axi_dmac_read(dmac, AXI_DMAC_REG_FLAGS, &initial_reg_val);
+	axi_dmac_write(dmac, AXI_DMAC_REG_FLAGS, DMA_CYCLIC);
+	axi_dmac_read(dmac, AXI_DMAC_REG_FLAGS, &reg_val);
+	if (reg_val == DMA_CYCLIC)
+		dmac->hw_cyclic = true;
+	/* Restore initial value for AXI_DMAC_REG_FLAGS register */
+	axi_dmac_write(dmac, AXI_DMAC_REG_FLAGS, initial_reg_val);
+
+	/* Get maximum burst size and set value. */
+	axi_dmac_write(dmac, AXI_DMAC_REG_X_LENGTH, dmac->max_length);
+	axi_dmac_read(dmac, AXI_DMAC_REG_X_LENGTH, &dmac->max_length);
+
+	/* Get transfer direction and set value. */
+	axi_dmac_write(dmac, AXI_DMAC_REG_DEST_ADDRESS, 0xffffffff);
+	axi_dmac_read(dmac, AXI_DMAC_REG_DEST_ADDRESS, &dest_mem_mapped);
+	axi_dmac_write(dmac, AXI_DMAC_REG_SRC_ADDRESS, 0xffffffff);
+	axi_dmac_read(dmac, AXI_DMAC_REG_SRC_ADDRESS, &src_mem_mapped);
+
+	if (dest_mem_mapped && !src_mem_mapped) {
+		dmac->direction = DMA_DEV_TO_MEM;
+	} else if (!dest_mem_mapped && src_mem_mapped) {
+		dmac->direction = DMA_MEM_TO_DEV;
+	} else if (dest_mem_mapped && src_mem_mapped) {
+		dmac->direction = DMA_MEM_TO_MEM;
+	} else {
+		printf("Destination and source memory-mapped interfaces not supported.\n");
+		return -1;
+	}
+	return 0;
+}
+
+/*******************************************************************************
+ * @brief Get transfer status (value of dmac->transfer.transfer_done flag).
+ *
+ * @param dmac_core - DMAC istance.
+ * @param init - Structure containing initializing data.
+ *
+ * @return 0 for success, -1 in case of failure.
+*******************************************************************************/
+int32_t axi_dmac_init(struct axi_dmac **dmac_core,
+		      const struct axi_dmac_init *init)
+{
+	struct axi_dmac *dmac;
+
+	dmac = (struct axi_dmac *)calloc(1, sizeof(*dmac));
+	if (!dmac)
+		return -1;
+
+	dmac->name = init->name;
+	dmac->base = init->base;
+	dmac->irq_option = init->irq_option;
+
+	*dmac_core = dmac;
+
+	int32_t status = axi_dmac_detect_caps(*dmac_core);
+	if (status < 0)
+		return -1;
+
+	return 0;
+}
+
+/*******************************************************************************
+ * @brief Remove the DMAC instance.
+ *
+ * @param dmac - DMAC istance.
+ *
+ * @return 0 for success, -1 in case of failure.
+*******************************************************************************/
+int32_t axi_dmac_remove(struct axi_dmac *dmac)
+{
+	if (!dmac)
+		return -1;
+
+	free(dmac);
+
+	return 0;
+}
+
+/*******************************************************************************
+ * @brief Start a DMA transfer.
+ *
+ * @param dmac - DMAC istance.
+ * @param dma_transfer - Structure containing transfer details.
+ *
+ * @return 0 for success, -1 in case of failure.
+*******************************************************************************/
+int32_t axi_dmac_transfer_start(struct axi_dmac *dmac,
+				struct axi_dma_transfer *dma_transfer)
+{
+	uint32_t reg_val, burst_size;
+
+	if (dma_transfer->size == 0)
+		return 0; /* Nothing to do. */
+
+	/* Set current transfer parameters. */
+	dmac->transfer.size = dma_transfer->size;
+	dmac->transfer.cyclic = dma_transfer->cyclic;
+	dmac->transfer.dest_addr = dma_transfer->dest_addr;
+	dmac->transfer.src_addr = dma_transfer->src_addr;
+
+	dmac->remaining_size = dma_transfer->size;
+	dmac->next_dest_addr = dma_transfer->dest_addr;
+	dmac->next_src_addr = dma_transfer->src_addr;
+
+	/* If HW cyclic transfer selected and not available, show error */
+	/* HW cyclic transfer available only for MEM to DEV transfers. */
+	if ((!dmac->hw_cyclic) && (dma_transfer->cyclic == CYCLIC)) {
+		printf("Transfer mode not supported!\n");
+		return -1;
+	}
+
+	/* Cyclic transfers not possible for DEV_TO_MEM and MEM_TO_MEM transmissions. */
+	if ((dmac->direction == DMA_DEV_TO_MEM)
+	    || (dmac->direction == DMA_MEM_TO_MEM)) {
+		if (dma_transfer->cyclic == CYCLIC) {
+			printf("Transfer mode not supported!\n");
+			return -1;
+		}
+	}
+
+	/* Cyclic transfers set to HW or SW depending on size for MEM to DEV. */
+	if ((dmac->direction == DMA_MEM_TO_DEV) && (dmac->transfer.cyclic == CYCLIC)) {
+		if ((dmac->remaining_size - 1) <= dmac->max_length) {
+			if (dmac->hw_cyclic) {
+				axi_dmac_read(dmac, AXI_DMAC_REG_FLAGS, &reg_val);
+				reg_val = reg_val | DMA_CYCLIC;
+				axi_dmac_write(dmac, AXI_DMAC_REG_FLAGS, reg_val);
+			}
+		} else {
+			axi_dmac_read(dmac, AXI_DMAC_REG_FLAGS, &reg_val);
+			reg_val = reg_val & ~DMA_CYCLIC;
+			axi_dmac_write(dmac, AXI_DMAC_REG_FLAGS, reg_val);
+		}
+	}
+
+	/* Enable DMA if not already enabled. */
+	axi_dmac_read(dmac, AXI_DMAC_REG_CTRL, &reg_val);
+	if (!(reg_val & AXI_DMAC_CTRL_ENABLE)) {
+		axi_dmac_write(dmac, AXI_DMAC_REG_CTRL, 0x0);
+		axi_dmac_write(dmac, AXI_DMAC_REG_CTRL, AXI_DMAC_CTRL_ENABLE);
+		axi_dmac_write(dmac, AXI_DMAC_REG_IRQ_MASK, 0x0);
+	}
+
+	axi_dmac_read(dmac, AXI_DMAC_REG_TRANSFER_SUBMIT, &reg_val);
+	/* If we don't have a start of transfer then start compute
+	 * values and trigger next transfer. */
+	if (!(reg_val & AXI_DMAC_QUEUE_FULL)) {
+		switch (dmac->direction) {
+		case DMA_DEV_TO_MEM:
+			dmac->init_addr = dmac->next_dest_addr;
+			axi_dmac_write(dmac, AXI_DMAC_REG_DEST_ADDRESS, dmac->next_dest_addr);
+			axi_dmac_write(dmac, AXI_DMAC_REG_DEST_STRIDE, 0x0);
+			break;
+		case DMA_MEM_TO_DEV:
+			dmac->init_addr = dmac->next_src_addr;
+			axi_dmac_write(dmac, AXI_DMAC_REG_SRC_ADDRESS, dmac->next_src_addr);
+			axi_dmac_write(dmac, AXI_DMAC_REG_SRC_STRIDE, 0x0);
+			break;
+		case DMA_MEM_TO_MEM:
+			dmac->init_addr = dmac->next_src_addr;
+			axi_dmac_write(dmac, AXI_DMAC_REG_DEST_ADDRESS, dmac->next_dest_addr);
+			axi_dmac_write(dmac, AXI_DMAC_REG_DEST_STRIDE, 0x0);
+			axi_dmac_write(dmac, AXI_DMAC_REG_SRC_ADDRESS, dmac->next_src_addr);
+			axi_dmac_write(dmac, AXI_DMAC_REG_SRC_STRIDE, 0x0);
+			break;
+		default:
+			return -1; /* Other directions are not supported yet. */
+		}
+
+		/* Compute the burst size. */
+		if (dmac->remaining_size > dmac->max_length) {
+			burst_size = dmac->max_length;
+		} else {
+			burst_size = dmac->remaining_size - 1;
+		}
+
+		/* Compute next address (src or dest, or both, depending on type of transfer). */
+		switch (dmac->direction) {
+		case DMA_DEV_TO_MEM:
+			dmac->next_dest_addr = dmac->next_dest_addr + (burst_size + 1);
+			break;
+		case DMA_MEM_TO_DEV:
+			dmac->next_src_addr = dmac->next_src_addr + (burst_size + 1);
+			break;
+		case DMA_MEM_TO_MEM:
+			dmac->next_dest_addr = dmac->next_dest_addr + (burst_size + 1);
+			dmac->next_src_addr = dmac->next_src_addr + (burst_size + 1);
+			break;
+		default:
+			return -1;
+		}
+
+		/* Compute remaining size. */
+		dmac->remaining_size = dmac->remaining_size - (burst_size + 1);
+
+		/* Specify the length of the transfer and trigger transfer. */
+		axi_dmac_write(dmac, AXI_DMAC_REG_X_LENGTH, burst_size);
+		axi_dmac_write(dmac, AXI_DMAC_REG_Y_LENGTH, 0x0);
+		axi_dmac_write(dmac, AXI_DMAC_REG_TRANSFER_SUBMIT, AXI_DMAC_TRANSFER_SUBMIT);
+	} else {
+		return -1;
+	}
+
+	return 0;
+}
+
+/*******************************************************************************
+ * @brief Wait for DMA transfer to be completed.
+ *
+ * @param dmac - DMAC istance.
+ * @param timeout_ms - Number of ms to wait for completion of transfer.
+ *
+ * @return 0 for success, -1 in case trasnfer not completed in specified time.
+*******************************************************************************/
+int32_t axi_dmac_transfer_wait_completion(struct axi_dmac *dmac,
+		uint32_t timeout_ms)
+{
+	uint32_t timeout = 0;
+	uint32_t reg_val = 0;
+
+	if (dmac->irq_option == IRQ_ENABLED) {
+		while (!dmac->transfer.transfer_done) {
+			timeout++;
+			mdelay(1);
+			if (timeout == timeout_ms) {
+				printf("Error transferring data using DMA.\n");
+				return -1;
+			}
+		}
+	} else if (dmac->irq_option == IRQ_DISABLED) {
+		axi_dmac_read(dmac, AXI_DMAC_REG_IRQ_PENDING, &reg_val);
+		while (reg_val != (AXI_DMAC_IRQ_SOT | AXI_DMAC_IRQ_EOT)) {
+			timeout++;
+			mdelay(1);
+			if (timeout == timeout_ms) {
+				printf("Error transferring data using DMA.\n");
+				return -1;
+			}
+			axi_dmac_read(dmac, AXI_DMAC_REG_IRQ_PENDING, &reg_val);
+		}
+	}
+
+	return 0;
+}
+
+/*******************************************************************************
+ * @brief Stop a DMA transfer.
+ *
+ * @param dmac - DMAC istance.
+ *
+ * @return None
+*******************************************************************************/
+void axi_dmac_transfer_stop(struct axi_dmac *dmac)
+{
+	axi_dmac_write(dmac, AXI_DMAC_REG_CTRL, AXI_DMAC_CTRL_DISABLE);
+}
@@ -0,0 +1,156 @@
+/***************************************************************************//**
+ *   @file   axi_dmac.h
+ *   @brief  Driver for the Analog Devices AXI-DMAC core.
+ *   @author DBogdan ([email protected])
+********************************************************************************
+ * Copyright 2018(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+#ifndef AXI_DMAC_H_
+#define AXI_DMAC_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdint.h>
+#include "util.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+#define AXI_DMAC_REG_IRQ_MASK		0x80
+#define AXI_DMAC_REG_IRQ_PENDING	0x84
+#define AXI_DMAC_IRQ_SOT			BIT(0)
+#define AXI_DMAC_IRQ_EOT			BIT(1)
+
+#define AXI_DMAC_REG_INTF_DESC		0x010
+#define AXI_DMAC_DMA_TYPE_DEST		GENMASK(5,4)
+#define AXI_DMAC_DMA_TYPE_SRC		GENMASK(13,12)
+//Define macro for src and dest
+
+#define AXI_DMAC_REG_CTRL			0x400
+#define AXI_DMAC_CTRL_ENABLE		BIT(0)
+#define AXI_DMAC_CTRL_DISABLE		0u
+#define AXI_DMAC_CTRL_PAUSE			BIT(1)
+
+#define AXI_DMAC_REG_TRANSFER_ID		0x404
+#define AXI_DMAC_REG_TRANSFER_SUBMIT	0x408
+#define AXI_DMAC_TRANSFER_SUBMIT		BIT(0)
+#define AXI_DMAC_QUEUE_FULL				BIT(0)
+#define AXI_DMAC_REG_FLAGS				0x40c
+#define AXI_DMAC_REG_DEST_ADDRESS		0x410
+#define AXI_DMAC_REG_SRC_ADDRESS		0x414
+#define AXI_DMAC_REG_X_LENGTH			0x418
+#define AXI_DMAC_REG_Y_LENGTH			0x41c
+#define AXI_DMAC_REG_DEST_STRIDE		0x420
+#define AXI_DMAC_REG_SRC_STRIDE			0x424
+#define AXI_DMAC_REG_TRANSFER_DONE		0x428
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+enum use_irq {
+	IRQ_DISABLED = 0,
+	IRQ_ENABLED = 1
+};
+
+enum dma_direction {
+	INVALID_DIR = 0,
+	DMA_DEV_TO_MEM = 1,
+	DMA_MEM_TO_DEV = 2,
+	DMA_MEM_TO_MEM = 3
+};
+
+enum dma_flags {
+	DMA_CYCLIC = 1,
+	DMA_LAST = 2,
+	DMA_PARTIAL_REPORTING_EN = 4
+};
+
+// Could be transformed to a bool
+enum cyclic_transfer {
+	NO = 0,
+	CYCLIC = 1
+};
+
+struct axi_dma_transfer {
+	uint32_t size;
+	volatile bool transfer_done;
+	enum cyclic_transfer cyclic;
+	uint32_t src_addr;
+	uint32_t dest_addr;
+};
+
+struct axi_dmac {
+	const char *name;
+	uint32_t base;
+	enum use_irq irq_option;
+	enum dma_direction direction;
+	bool hw_cyclic;
+	uint32_t max_length;
+	volatile struct axi_dma_transfer transfer;
+	//Current sub-transfer properties
+	uint32_t init_addr;
+	uint32_t remaining_size;
+	uint32_t next_src_addr;
+	uint32_t next_dest_addr;
+};
+
+struct axi_dmac_init {
+	const char *name;
+	uint32_t base;
+	enum use_irq irq_option;
+};
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+void axi_dmac_dev_to_mem_isr(void *instance);
+void axi_dmac_mem_to_dev_isr(void *instance);
+void axi_dmac_mem_to_mem_isr(void *instance);
+void axi_dmac_write_isr(void *instance);
+int32_t axi_dmac_read(struct axi_dmac *dmac, uint32_t reg_addr,
+		      uint32_t *reg_data);
+int32_t axi_dmac_write(struct axi_dmac *dmac, uint32_t reg_addr,
+		       uint32_t reg_data);
+int32_t axi_dmac_is_transfer_ready(struct axi_dmac *dmac, bool *rdy);
+int32_t axi_dmac_init(struct axi_dmac **adc_core,
+		      const struct axi_dmac_init *init);
+int32_t axi_dmac_remove(struct axi_dmac *dmac);
+int32_t axi_dmac_transfer_start(struct axi_dmac *dmac,
+				struct axi_dma_transfer *dma_transfer);
+int32_t axi_dmac_transfer_wait_completion(struct axi_dmac *dmac,
+		uint32_t timeout_ms);
+void axi_dmac_transfer_stop(struct axi_dmac *dmac);
+
+#endif
@@ -0,0 +1,996 @@
+/*******************************************************************************
+ *   @file   spi_engine.c
+ *   @brief  Core implementation of the SPI Engine Driver.
+ *   @author Sergiu Cuciurean ([email protected])
+********************************************************************************
+ * Copyright 2019(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+/* In debug mode the printf function used in displaying the messages is causing
+significant delays */
+//#define DEBUG_LEVEL 2
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sleep.h>
+#include <inttypes.h>
+
+#include "axi_io.h"
+#include "error.h"
+#include "spi_engine.h"
+
+/**
+ * @brief Spi engine platform specific SPI platform ops structure
+ */
+const struct spi_platform_ops spi_eng_platform_ops = {
+	.init = &spi_engine_init,
+	.write_and_read = &spi_engine_write_and_read,
+	.write_and_read_3wire = &spi_engine_write_and_read_3wire,
+	.remove = &spi_engine_remove
+};
+
+/******************************************************************************/
+/***************************** Static variables *******************************/
+/******************************************************************************/
+
+/**
+ * @brief Static variable used to sync transfers
+ *
+ */
+static uint8_t _sync_id = 0x01;
+
+/******************************************************************************/
+/************************** Functions Implementation **************************/
+/******************************************************************************/
+
+/**
+ * @brief Write SPI Engine's axi registers
+ *
+ * @param desc Decriptor containing SPI Engine's parameters
+ * @param reg_addr The address of the SPI Engine's axi register where the data
+ * 	will be written
+ * @param reg_data Data that will be written
+ * @return int32_t This function allways returns SUCCESS
+ */
+int32_t spi_engine_write(struct spi_engine_desc *desc,
+			 uint32_t reg_addr,
+			 uint32_t reg_data)
+{
+	axi_io_write(desc->spi_engine_baseaddr, reg_addr, reg_data);
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Read SPI Engine's axi registers
+ *
+ * @param desc Decriptor containing SPI Engine's parameters
+ * @param reg_addr The address of the SPI Engine's axi register from where the
+ * 	data where the data will be read
+ * @param reg_data Pointer where the read that will be stored
+ * @return int32_t This function allways returns SUCCESS
+ */
+int32_t spi_engine_read(struct spi_engine_desc *desc,
+			uint32_t reg_addr,
+			uint32_t *reg_data)
+{
+	axi_io_read(desc->spi_engine_baseaddr, reg_addr, reg_data);
+	return SUCCESS;
+}
+
+/**
+ * @brief Set width of the transferred word over SPI
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param data_width The desired data width
+ * 	The supported values are:
+ * 		- 8
+ * 		- 16
+ * 		- 24
+ * 		- 32
+ */
+int32_t spi_engine_set_transfer_width(struct spi_desc *desc,
+				      uint8_t data_width)
+{
+	struct spi_engine_desc	*desc_extra;
+
+	desc_extra = desc->extra;
+
+	if (data_width > desc_extra->max_data_width)
+		desc_extra->data_width = desc_extra->max_data_width;
+	else
+		desc_extra->data_width = data_width;
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Set SPI engine clock frequency
+ *
+ * @param desc Decriptor containing SPI Engine's parameters
+ * @param speed_hz SPI engine transfer speed
+ */
+void spi_engine_set_speed(struct spi_desc *desc,
+			  uint32_t speed_hz)
+{
+	struct spi_engine_desc	*desc_extra;
+
+	desc_extra = desc->extra;
+
+	desc_extra->clk_div =  desc_extra->ref_clk_hz /
+			       (2 * speed_hz) - 1;
+}
+
+/**
+ * @brief Set the number of words transferred in a single transaction
+ *
+ * @param desc Decriptor containing SPI Engine's parameters
+ * @param bytes_number The number of bytes to be converted
+ * @return uint8_t A number of words in which bytes_number can be grouped
+ */
+static uint8_t spi_get_words_number(struct spi_engine_desc *desc,
+				    uint8_t bytes_number)
+{
+	uint8_t xfer_word_len;
+	uint8_t words_number;
+
+	xfer_word_len = desc->data_width / 8;
+	words_number = bytes_number / xfer_word_len;
+
+	if ((bytes_number % xfer_word_len) != 0)
+		words_number++;
+
+	return words_number;
+}
+
+/**
+ * @brief Get the word length in bytes
+ *
+ * @param desc Decriptor containing SPI Engine's parameters
+ * @return uint8_t Number of bytes that fit in one word
+ */
+static uint8_t spi_get_word_length(struct spi_engine_desc *desc)
+{
+	uint8_t word_length;
+
+	word_length = desc->data_width / 8;
+
+	return word_length;
+}
+
+/**
+ * @brief Compute the prescaler used to set the sleep period.
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param sleep_time_ns The amount of time where the transfer hangs
+ * @param sleep_div Clock prescaler
+ * @return int32_t This function allways returns SUCCESS
+ */
+static int32_t spi_get_sleep_div(struct spi_desc *desc,
+				 uint32_t sleep_time_ns,
+				 uint32_t *sleep_div)
+{
+	struct spi_engine_desc	*eng_desc;
+
+	eng_desc = desc->extra;
+
+	/*
+	 * Engine Wiki:
+	 *
+	 * The frequency of the SCLK signal is derived from the
+	 * module clock frequency using the following formula:
+	 * f_sclk = f_clk / ((div + 1) * 2)
+	 */
+
+	*sleep_div = (desc->max_speed_hz / 1000000 * sleep_time_ns / 1000) /
+		     ((eng_desc->clk_div + 1) * 2) - 1;
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Create a new commands queue used in a spi transfer
+ *
+ * @param fifo Command buffer, usually used in fifo mode
+ * @param cmd Command with which the buffer will be initiated
+ * @return int32_t Failure if the memory allocation failed
+ */
+static int32_t spi_engine_queue_new_cmd(struct spi_engine_cmd_queue **fifo,
+					uint32_t cmd)
+{
+	struct spi_engine_cmd_queue *local_fifo;
+
+	local_fifo = (spi_engine_cmd_queue*)malloc(sizeof(*local_fifo));
+
+	if(!local_fifo)
+		return FAILURE;
+
+	local_fifo->cmd = cmd;
+	local_fifo->next = NULL;
+	*fifo = local_fifo;
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Add a command at the end of an existing queue
+ *
+ * @param fifo Command buffer, usually used in fifo mode
+ * @param cmd Command to be added
+ */
+static void spi_engine_queue_add_cmd(struct spi_engine_cmd_queue **fifo,
+				     uint32_t cmd)
+{
+	struct spi_engine_cmd_queue *to_add = NULL;
+	struct spi_engine_cmd_queue *local_fifo;
+
+	local_fifo = *fifo;
+	while (local_fifo->next != NULL) {
+		// Get the last element
+		local_fifo = local_fifo->next;
+	}
+
+	// Create a new element
+	spi_engine_queue_new_cmd(&to_add, cmd);
+	// Add as the next element
+	local_fifo->next = to_add;
+}
+
+/**
+ * @brief Add a command at the beginning of an existing queue
+ *
+ * @param fifo Command buffer, usually used in fifo mode
+ * @param cmd Command to be added
+ */
+static void spi_engine_queue_append_cmd(struct spi_engine_cmd_queue **fifo,
+					uint32_t cmd)
+{
+	struct spi_engine_cmd_queue *to_add = NULL;
+
+	// Create a new element
+	spi_engine_queue_new_cmd(&to_add, cmd);
+	// Interchange the addresses
+	to_add->next = *fifo;
+	*fifo = to_add;
+}
+
+
+/**
+ * @brief Get the command from the beginning of the queue
+ *
+ * @param fifo Command buffer, usually used in fifo mode
+ * @param cmd Value of the command that was extracted
+ * @return int32_t Return FAILURE if the queue is empty
+ */
+static int32_t spi_engine_queue_get_cmd(struct spi_engine_cmd_queue **fifo,
+					uint32_t *cmd)
+{
+	struct spi_engine_cmd_queue *local_fifo;
+
+	if (!*fifo)
+		return FAILURE;
+
+	local_fifo = *fifo;
+	*cmd = local_fifo->cmd;
+	if ((*fifo)->next) {
+		*fifo = local_fifo->next;
+		free(local_fifo);
+	} else {
+		free(*fifo);
+		*fifo = NULL;
+	}
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Free the memory allocated by a queue
+ *
+ * @param fifo The queue that needs it's memory freed
+ * @return int32_t This function always returns SUCCESS
+ */
+static int32_t spi_engine_queue_free(struct spi_engine_cmd_queue **fifo)
+{
+	if(*fifo && (*fifo)->next)
+		spi_engine_queue_free(&(*fifo)->next);
+	if((*fifo) != NULL) {
+		free(*fifo);
+		*fifo = NULL;
+	}
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Write the SPI engine's command fifo
+ *
+ * @param desc Decriptor containing SPI Engine's parameters
+ * @param cmd The command that will be written
+ * @return int32_t Returns FAILURE if the the axi transfer failed
+ */
+static int32_t spi_engine_write_cmd_reg(struct spi_engine_desc *desc,
+					uint32_t cmd)
+{
+	int32_t ret;
+
+	/* Check if offload is enabled */
+	if(desc->offload_config & (OFFLOAD_TX_EN | OFFLOAD_RX_EN)) {
+		ret = spi_engine_write(desc,
+				       SPI_ENGINE_REG_OFFLOAD_CMD_MEM(0),
+				       cmd);
+
+	} else {
+		ret = spi_engine_write(desc,
+				       SPI_ENGINE_REG_CMD_FIFO,
+				       cmd);
+	}
+
+	return ret;
+}
+
+/**
+ * @brief Write a transfer command to the SPI engine's command fifo
+ *
+ * @param desc Decriptor containing SPI Engine's parameters
+ * @param read_write Read/Write operation flag
+ * @param bytes_number Number of bytes to transfer
+ * @return int32_t This function always returns SUCCESS
+ */
+static int32_t spi_engine_transfer(struct spi_engine_desc *desc,
+				   uint8_t read_write,
+				   uint8_t bytes_number)
+{
+	uint8_t words_number;
+
+	words_number = spi_get_words_number(desc, bytes_number);
+
+	desc->offload_tx_len += words_number;
+
+	/*
+	 * Engine Wiki:
+	 *
+	 * https://wiki.analog.com/resources/fpga/peripherals/spi_engine
+	 *
+	 * The words number is zero based
+	 */
+
+	spi_engine_write_cmd_reg(desc,
+				 SPI_ENGINE_CMD_TRANSFER(read_write,
+						 words_number  - 1));
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Change the state of the chip select port
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param assert Chip select state.
+ * 		 The supported values are :
+ * 			-true (HIGH)
+ * 			-false (LOW)
+ */
+static void spi_engine_set_cs(struct spi_desc *desc,
+			      bool assert)
+{
+	uint8_t			mask;
+	struct spi_engine_desc	*eng_desc;
+
+	eng_desc = desc->extra;
+
+	mask = 0xFF;
+	/* Switch the state only of the selected chip select */
+	if (!assert)
+		mask ^= BIT(desc->chip_select);
+
+	spi_engine_write_cmd_reg(eng_desc,
+				 SPI_ENGINE_CMD_ASSERT(eng_desc->cs_delay,
+						 mask));
+}
+
+/**
+ * @brief Add a delay between the engine commands
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param sleep_time_ns Number of nanoseconds to sleep between commands
+ */
+static void spi_gen_sleep_ns(struct spi_desc *desc,
+			     uint32_t sleep_time_ns)
+{
+	uint32_t 		sleep_div;
+	struct spi_engine_desc	*eng_desc;
+
+	eng_desc = desc->extra;
+
+	spi_get_sleep_div(desc, sleep_time_ns, &sleep_div);
+
+	spi_engine_write_cmd_reg(eng_desc, SPI_ENGINE_CMD_SLEEP(sleep_div));
+}
+
+/**
+ * @brief Spi engine command interpreter
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param cmd Command to send to the engine
+ * @return int32_t - SUCCESS if the command is transferred
+ *		   - FAILURE if the command format is invalid
+ */
+static int32_t spi_engine_write_cmd(struct spi_desc *desc,
+				    uint32_t cmd)
+{
+	uint8_t				engine_command;
+	uint8_t				parameter;
+	uint8_t				modifier;
+	struct spi_engine_desc		*desc_extra;
+
+	desc_extra = desc->extra;
+
+	engine_command = (cmd >> 12) & 0x0F;
+	modifier = (cmd >> 8) & 0x0F;
+	parameter = cmd & 0xFF;
+
+	switch(engine_command) {
+	case SPI_ENGINE_INST_TRANSFER:
+		spi_engine_transfer(desc_extra, modifier, parameter);
+		break;
+
+	case SPI_ENGINE_INST_ASSERT:
+		if(parameter == 0xFF) {
+			/* Set the CS HIGH */
+			spi_engine_set_cs(desc, true);
+		} else if(parameter == 0x00) {
+			/* Set the CS LOW */
+			spi_engine_set_cs(desc, false);
+		}
+		break;
+
+	/* The SYNC and SLEEP commands got the same value but different
+	modifier */
+	case SPI_ENGINE_INST_SYNC_SLEEP:
+		/* SYNC instruction */
+		if(modifier == 0x00) {
+			spi_engine_write_cmd_reg(desc_extra, cmd);
+		} else if(modifier == 0x01) {
+			spi_gen_sleep_ns(desc, parameter);
+		}
+		break;
+	case SPI_ENGINE_INST_CONFIG:
+		spi_engine_write_cmd_reg(desc_extra, cmd);
+
+		break;
+
+	default:
+
+		return FAILURE;
+	}
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Prepare the command queue before sending it to the engine
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param msg Structure used to store the transfer messages
+ * @return int32_t This function always returns SUCCESS
+ */
+static int32_t spi_engine_compile_message(struct spi_desc *desc,
+		struct spi_engine_msg *msg)
+{
+	struct spi_engine_desc	*desc_extra;
+
+	desc_extra = desc->extra;
+
+	/* Configure the prescaler */
+	spi_engine_queue_append_cmd(&msg->cmds,
+				    SPI_ENGINE_CMD_CONFIG(
+					    SPI_ENGINE_CMD_REG_CLK_DIV,
+					    desc_extra->clk_div));
+
+	/* Set the data transfer length */
+	spi_engine_queue_append_cmd(&msg->cmds,
+				    SPI_ENGINE_CMD_CONFIG(
+					    SPI_ENGINE_CMD_DATA_TRANSFER_LEN,
+					    desc_extra->data_width));
+	/*
+	 * Configure the spi mode :
+	 *	- 3 wire
+	 *	- CPOL
+	 *	- CPHA
+	 */
+	spi_engine_queue_append_cmd(&msg->cmds,
+				    SPI_ENGINE_CMD_CONFIG(
+					    SPI_ENGINE_CMD_REG_CONFIG,
+					    desc->mode));
+
+	/* Add a sync command to signal that the transfer has finished */
+	spi_engine_queue_add_cmd(&msg->cmds, SPI_ENGINE_CMD_SYNC(_sync_id));
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Initiate a spi transfer (Blocking)
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param msg Structure used to store the transfer messages
+ * @return int32_t - SUCCESS if the transfer finished
+ *		   - FAILURE if the memory allocation failed
+ */
+static int32_t spi_engine_transfer_message(struct spi_desc *desc,
+		struct spi_engine_msg *msg)
+{
+	uint32_t		i;
+	uint32_t		data;
+	uint32_t		sync_id;
+	bool 			offload_en;
+	struct spi_engine_desc	*desc_extra;
+
+	desc_extra = desc->extra;
+
+	spi_engine_compile_message(desc, msg);
+
+	offload_en = (desc_extra->offload_config & OFFLOAD_TX_EN) |
+		     (desc_extra->offload_config & OFFLOAD_RX_EN);
+
+	/* Write the command fifo buffer */
+	while(msg->cmds != NULL) {
+		spi_engine_queue_get_cmd(&msg->cmds, &data);
+		spi_engine_write_cmd(desc, data);
+	}
+
+	/* Write a number of tx_length WORDS on the SDO line */
+	if(offload_en) {
+		for(i = 0; i < desc_extra->offload_tx_len; i++)
+			spi_engine_write(desc_extra,
+					 SPI_ENGINE_REG_OFFLOAD_SDO_MEM(0),
+					 msg->tx_buf[i]);
+
+	} else {
+		if(msg->tx_buf != NULL){
+			for(i = 0; i < msg->tx_length; i++)
+				spi_engine_write(desc_extra,
+						SPI_ENGINE_REG_SDO_DATA_FIFO,
+						msg->tx_buf[i]);
+		}
+		do {
+			spi_engine_read(desc_extra,
+					SPI_ENGINE_REG_SYNC_ID,
+					&sync_id);
+		}
+		/* Wait for the end sync signal */
+		while(sync_id != _sync_id);
+		_sync_id++;
+
+		/* Read a number of rx_length WORDS from the SDI line and store
+		them */
+		for(i = 0; i < msg->rx_length; i++) {
+			spi_engine_read(desc_extra,
+					SPI_ENGINE_REG_SDI_DATA_FIFO,
+					&data);
+								/* Store the rx data if rx buffer valid, flush sdi_fifo if
+			rx buffer is invalid.*/
+			if(msg->rx_buf != NULL){
+				msg->rx_buf[i] = data;
+			}
+		}
+	}
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Initialize the spi engine
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param param Structure containing the spi init parameters
+ * @return int32_t - SUCCESS if the transfer finished
+ *		   - FAILURE if the memory allocation failed
+ */
+int32_t spi_engine_init(struct spi_desc **desc,
+			const struct spi_init_param *param)
+{
+	uint32_t			data_width;
+	uint32_t			spi_engine_version;
+	struct spi_engine_desc		*eng_desc;
+	struct spi_engine_init_param	*spi_engine_init;
+
+	if (!param) {
+		return FAILURE;
+	}
+
+	*desc = malloc(sizeof(**desc));
+	if(! *desc) {
+		free(*desc);
+		return FAILURE;
+	}
+
+	eng_desc = (struct spi_engine_desc*)malloc(sizeof(*eng_desc));
+
+	if (!eng_desc)
+		return FAILURE;
+
+	spi_engine_init = param->extra;
+
+	(*desc)->max_speed_hz = param->max_speed_hz;
+	(*desc)->chip_select = param->chip_select;
+	(*desc)->mode = param->mode;
+	(*desc)->extra = eng_desc;
+
+	eng_desc->offload_config = OFFLOAD_DISABLED;
+	eng_desc->spi_engine_baseaddr = spi_engine_init->spi_engine_baseaddr;
+	eng_desc->type = spi_engine_init->type;
+	eng_desc->cs_delay = spi_engine_init->cs_delay;
+	eng_desc->ref_clk_hz = spi_engine_init->ref_clk_hz;
+	eng_desc->clk_div =  eng_desc->ref_clk_hz /
+			     (2 * param->max_speed_hz) - 1;
+
+	/* Perform a reset */
+	spi_engine_write(eng_desc, SPI_ENGINE_REG_RESET, 0x01);
+	usleep(1000);
+	spi_engine_write(eng_desc, SPI_ENGINE_REG_RESET, 0x00);
+
+	/* Get current data width */
+	spi_engine_read(eng_desc, SPI_ENGINE_REG_DATA_WIDTH, &data_width);
+	eng_desc->max_data_width = data_width;
+
+	spi_engine_set_transfer_width(*desc, spi_engine_init->data_width);
+
+	/* Get spi engine version */
+	spi_engine_read(eng_desc, SPI_ENGINE_REG_VERSION, &spi_engine_version);
+
+	printf("Spi engine v%"PRIu32".%"PRIu32".%"PRIu32" successfully initialized.\n",
+	       (spi_engine_version >> 16),
+	       ((spi_engine_version >> 8) & 0xFF),
+	       (spi_engine_version & 0xFF));
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Write/read on the spi interface in 4-wire mode (full-duplex)
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param data Pointer to data buffer
+ * @param bytes_number Number of bytes to transfer
+ * @return int32_t - SUCCESS if the transfer finished
+ *		   - FAILURE if the memory allocation or transfer failed
+ */
+int32_t spi_engine_write_and_read(struct spi_desc *desc,
+				  uint8_t *data,
+				  uint16_t bytes_number)
+{
+	uint8_t 		word_len;
+	uint8_t 		words_number;
+	int32_t 		ret;
+	struct spi_engine_msg	msg;
+	struct spi_engine_desc	*desc_extra;
+
+	desc_extra = desc->extra;
+
+	/* If we want to access SPI interface and SPI engine offload module was
+	 * activated, we need to disable it
+	 * This is set in spi_engine_offload_init() */
+	desc_extra->offload_config = OFFLOAD_DISABLED;
+	/* This is set in spi_engine_offload_transfer() */
+	spi_engine_write(desc_extra, SPI_ENGINE_REG_OFFLOAD_CTRL(0), 0);
+
+	words_number = spi_get_words_number(desc_extra, bytes_number);
+
+	msg.cmds = (spi_engine_cmd_queue*)malloc(sizeof(*msg.cmds));
+	if (!msg.cmds)
+		return FAILURE;
+
+	msg.tx_buf =(uint32_t*)calloc(words_number, sizeof(msg.tx_buf[0]));
+	msg.rx_buf =(uint32_t*)calloc(words_number, sizeof(msg.rx_buf[0]));
+	msg.tx_length = words_number;
+	msg.rx_length = words_number;
+
+	/* Get the length of transferred word */
+	word_len = spi_get_word_length(desc_extra);
+
+	/* Make sure the CS is HIGH before starting a transaction */
+	msg.cmds->next = NULL;
+	msg.cmds->cmd = CS_HIGH;
+	// Assert select.
+	spi_engine_queue_add_cmd(&msg.cmds, CS_LOW);
+	// add read/write command
+	spi_engine_queue_add_cmd(&msg.cmds, WRITE_READ(bytes_number));
+	// Disable select.
+	spi_engine_queue_add_cmd(&msg.cmds, CS_HIGH);
+
+	/* Pack the bytes into engine WORDS */
+	for (int i = 0; i < bytes_number; i++)
+		msg.tx_buf[i / word_len] |= data[i] << (desc_extra->data_width-
+							(i % word_len + 1) * 8);
+
+	ret = spi_engine_transfer_message(desc, &msg);
+
+	for (int i = 0; i < bytes_number; i++)
+		data[i] = msg.rx_buf[(i) / word_len] >>
+			  (desc_extra->data_width -
+			   ((i) % word_len + 1) * 8);
+
+	spi_engine_queue_free(&msg.cmds);
+	free(msg.tx_buf);
+	free(msg.rx_buf);
+
+	return ret;
+}
+
+/**
+ * @brief Write and read on the spi interface in 3-wire mode (half-duplex)
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param data Pointer to data buffer
+ * @param bytes_number Number of bytes to transfer
+ * @return int32_t - SUCCESS if the transfer finished
+ *		   - FAILURE if the memory allocation or transfer failed
+ */
+int32_t spi_engine_write_and_read_3wire(struct spi_desc *desc,
+		   uint8_t *write_data,
+		   uint8_t *read_data,
+		   uint16_t write_bytes_number,
+		   uint16_t read_bytes_number)
+{
+	uint8_t 		word_len;
+	uint8_t 		wr_words_number;
+	uint8_t 		rd_words_number;
+	int32_t 		ret;
+	struct spi_engine_msg	msg;
+	struct spi_engine_desc	*desc_extra;
+
+	desc_extra = desc->extra;
+
+	/* If we want to access SPI interface and SPI engine offload module was
+	 * activated, we need to disable it
+	 * This is set in spi_engine_offload_init() */
+	desc_extra->offload_config = OFFLOAD_DISABLED;
+	/* This is set in spi_engine_offload_transfer() */
+	spi_engine_write(desc_extra, SPI_ENGINE_REG_OFFLOAD_CTRL(0), 0);
+
+	wr_words_number = spi_get_words_number(desc_extra, write_bytes_number);
+	rd_words_number = spi_get_words_number(desc_extra, read_bytes_number);
+
+	msg.cmds = (spi_engine_cmd_queue*)malloc(sizeof(*msg.cmds));
+	if (!msg.cmds)
+		return FAILURE;
+
+	msg.tx_buf =(wr_words_number>0)?(uint32_t*)calloc(wr_words_number, sizeof(msg.tx_buf[0])):NULL;
+	msg.rx_buf =(rd_words_number>0)?(uint32_t*)calloc(rd_words_number, sizeof(msg.rx_buf[0])):NULL;
+	msg.tx_length = wr_words_number;
+	msg.rx_length = rd_words_number;
+
+	/* Get the length of transferred word */
+	word_len = spi_get_word_length(desc_extra);
+
+	/* Make sure the CS is HIGH before starting a transaction */
+	msg.cmds->next = NULL;
+	msg.cmds->cmd = CS_HIGH;
+
+	// Assert select.
+	spi_engine_queue_add_cmd(&msg.cmds, CS_LOW);
+
+	// add read/write command
+	if(write_bytes_number > 0)
+	spi_engine_queue_add_cmd(&msg.cmds, WRITE(write_bytes_number));
+	if(read_bytes_number > 0)
+	spi_engine_queue_add_cmd(&msg.cmds, READ(read_bytes_number));
+
+	// Disable select.
+	spi_engine_queue_add_cmd(&msg.cmds, CS_HIGH);
+
+	/* Pack the bytes into engine WORDS */
+	for (int i = 0; i < write_bytes_number; i++)
+		msg.tx_buf[i / word_len] |= write_data[i] << (desc_extra->data_width-
+							(i % word_len + 1) * 8);
+
+	ret = spi_engine_transfer_message(desc, &msg);
+
+	for (int i = 0; i < read_bytes_number; i++)
+		read_data[i] = msg.rx_buf[(i) / word_len] >>
+		  (desc_extra->data_width -
+		   ((i) % word_len + 1) * 8);
+
+	spi_engine_queue_free(&msg.cmds);
+	free(msg.tx_buf);
+	free(msg.rx_buf);
+
+	return ret;
+}
+
+/**
+ * @brief Initialize the SPI engine's offload module
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param param Structure containing the offload init parameters
+ * @return int32_t This function always returns SUCCESS
+ */
+int32_t spi_engine_offload_init(struct spi_desc *desc,
+				const struct spi_engine_offload_init_param *param)
+{
+	struct spi_engine_desc	*eng_desc;
+	struct axi_dmac_init	dmac_init;
+
+	eng_desc = desc->extra;
+
+	eng_desc->offload_config = param->offload_config;
+
+	if(!(param->dma_flags)) {
+		eng_desc->cyclic = CYCLIC;
+	} else {
+		if((*(param->dma_flags)) & DMA_CYCLIC)
+			eng_desc->cyclic = CYCLIC;
+		else
+			eng_desc->cyclic = NO;
+	}
+
+
+	if(param->offload_config & OFFLOAD_TX_EN) {
+		dmac_init.name = "DAC DMAC";
+		dmac_init.base = param->tx_dma_baseaddr;
+		axi_dmac_init(&eng_desc->offload_tx_dma, &dmac_init);
+		if(!eng_desc->offload_tx_dma)
+			return FAILURE;
+	}
+	if(param->offload_config & OFFLOAD_RX_EN) {
+		dmac_init.name = "ADC DMAC";
+		dmac_init.base = param->rx_dma_baseaddr;
+		axi_dmac_init(&eng_desc->offload_rx_dma, &dmac_init);
+		if(!eng_desc->offload_rx_dma)
+			return FAILURE;
+	}
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Initiate a SPI transfer in offload mode
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @param msg Offload message that get's to be transferred
+ * @param no_samples Number of time the messages will be transferred
+ * @return int32_t This function always returns SUCCESS
+ */
+int32_t spi_engine_offload_transfer(struct spi_desc *desc,
+				    struct spi_engine_offload_message msg,
+				    uint32_t no_samples)
+{
+	struct spi_engine_msg	transfer;
+	struct spi_engine_desc	*eng_desc;
+	uint32_t 		i;
+	uint8_t 		word_length;
+
+	eng_desc = desc->extra;
+
+	/* Check if offload is disabled */
+	if(!((eng_desc->offload_config & OFFLOAD_TX_EN) |
+	     (eng_desc->offload_config & OFFLOAD_RX_EN)))
+		return FAILURE;
+
+	spi_engine_write(eng_desc, SPI_ENGINE_REG_OFFLOAD_RESET(0), 1);
+	spi_engine_write(eng_desc, SPI_ENGINE_REG_OFFLOAD_RESET(0), 0);
+
+	eng_desc->offload_tx_len = 0;
+	eng_desc->offload_rx_len = 0;
+
+	transfer.cmds = (spi_engine_cmd_queue*)malloc(sizeof(*transfer.cmds));
+
+	if (!transfer.cmds)
+		return -1;
+
+	transfer.tx_buf = msg.commands_data;
+
+	/* Load the commands into the message */
+	transfer.cmds->next = NULL;
+	transfer.cmds->cmd = msg.commands[0];
+	i = 1;
+	while(i < msg.no_commands) {
+		spi_engine_queue_add_cmd(&transfer.cmds, msg.commands[i++]);
+
+	}
+
+	spi_engine_transfer_message(desc, &transfer);
+
+	/* Start transfer */
+	spi_engine_write(eng_desc, SPI_ENGINE_REG_OFFLOAD_CTRL(0), 0x0001);
+
+	word_length = spi_get_word_length(eng_desc);
+	if(eng_desc->offload_config & OFFLOAD_TX_EN) {
+		struct axi_dma_transfer tx_transfer = {
+			// Number of bytes to write/read
+			.size = word_length * eng_desc->offload_tx_len * no_samples,
+			// Transfer done flag
+			.transfer_done = 0,
+			// Signal transfer mode
+			.cyclic = eng_desc->cyclic,
+			// Address of data source
+			.src_addr = (uintptr_t)msg.tx_addr,
+			// Address of data destination
+			.dest_addr = 0
+		};
+		axi_dmac_transfer_start(eng_desc->offload_tx_dma, &tx_transfer);
+	}
+
+	if(eng_desc->offload_config & OFFLOAD_RX_EN) {
+		struct axi_dma_transfer rx_transfer = {
+			// Number of bytes to write/read
+			.size = word_length * eng_desc->offload_tx_len * no_samples,
+			// Transfer done flag
+			.transfer_done = 0,
+			// Signal transfer mode
+			.cyclic = NO,
+			// Address of data source
+			.src_addr = 0,
+			// Address of data destination
+			.dest_addr = (uintptr_t)msg.rx_addr
+		};
+		axi_dmac_transfer_start(eng_desc->offload_rx_dma, &rx_transfer);
+		axi_dmac_transfer_wait_completion(eng_desc->offload_rx_dma, 500);
+	}
+
+	usleep(1000);
+
+	spi_engine_queue_free(&transfer.cmds);
+
+	return SUCCESS;
+}
+
+/**
+ * @brief Free the resources allocated by spi_init().
+ *
+ * @param desc Decriptor containing SPI interface parameters
+ * @return int32_t This function allways returns SUCCESS
+ */
+int32_t spi_engine_remove(struct spi_desc *desc)
+{
+	struct spi_engine_desc	*eng_desc;
+
+	eng_desc = desc->extra;
+
+	if(eng_desc->offload_config & OFFLOAD_TX_EN)
+		axi_dmac_remove(eng_desc->offload_tx_dma);
+	if(eng_desc->offload_config & OFFLOAD_RX_EN)
+		axi_dmac_remove(eng_desc->offload_rx_dma);
+	free(desc->extra);
+	free(desc);
+
+	return SUCCESS;
+}
@@ -0,0 +1,229 @@
+/*******************************************************************************
+ *   @file   spi_engine.h
+ *   @brief  Header file of SPI Engine core features.
+ *   @author Sergiu Cuciurean ([email protected])
+********************************************************************************
+ * Copyright 2019(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+#ifndef SPI_ENGINE_H
+#define SPI_ENGINE_H
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include <stdint.h>
+
+#include "spi_engine_private.h"
+#include "../axi_dmac/axi_dmac.h"
+#include "../../platform/xilinx_spi.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+
+#define OFFLOAD_DISABLED		0x00
+#define OFFLOAD_TX_EN			BIT(0)
+#define OFFLOAD_RX_EN			BIT(1)
+#define OFFLOAD_TX_RX_EN		OFFLOAD_TX_EN | OFFLOAD_RX_EN
+
+#define SPI_ENGINE_MSG_QUEUE_END	0xFFFFFFFF
+
+/* Spi engine commands */
+#define	WRITE(no_bytes)			((SPI_ENGINE_INST_TRANSFER << 12) |\
+	(SPI_ENGINE_INSTRUCTION_TRANSFER_W << 8) | no_bytes)
+
+#define	READ(no_bytes)			((SPI_ENGINE_INST_TRANSFER << 12) |\
+	(SPI_ENGINE_INSTRUCTION_TRANSFER_R << 8) | no_bytes)
+
+#define	WRITE_READ(no_bytes)		((SPI_ENGINE_INST_TRANSFER << 12) |\
+	(SPI_ENGINE_INSTRUCTION_TRANSFER_RW << 8) | no_bytes)
+
+#define SLEEP(time)			SPI_ENGINE_CMD_SLEEP(time & 0xF)
+
+/* The delay and chip select parmeters are passed over the engine descriptor
+and will be used inside the function call */
+#define CS_HIGH				SPI_ENGINE_CMD_ASSERT(0x01, 0xFF)
+#define CS_LOW				SPI_ENGINE_CMD_ASSERT(0x01, 0x00)
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+
+/**
+ * @struct spi_engine_init_param
+ * @brief  Structure containing the init parameters needed by the SPI engine
+ */
+struct spi_engine_init_param {
+	/** SPI engine reference clock */
+	uint32_t	ref_clk_hz;
+	/** Type of implementation */
+	enum xil_spi_type	type;
+	/** Base address where the HDL core is situated */
+	uint32_t 		spi_engine_baseaddr;
+	/** Delay between the CS toggle and the start of SCLK */
+	uint32_t		cs_delay;
+	/** Data with of one SPI transfer ( in bits ) */
+	uint8_t			data_width;
+};
+
+
+/**
+ * @struct spi_engine_desc
+ * @brief  Structure representing an SPI engine device
+ */
+struct spi_engine_desc {
+	/** SPI engine reference clock */
+	uint32_t	ref_clk_hz;
+	/** Type of implementation */
+	enum xil_spi_type	type;
+	/** Pointer to a DMAC used in transmission */
+	struct axi_dmac		*offload_tx_dma;
+	/** Pointer to a DMAC used in reception */
+	struct axi_dmac		*offload_rx_dma;
+	/** Transfer mode for Tx DMAC */
+	enum cyclic_transfer cyclic;
+	/** Offload's module transfer direction : TX, RX or both */
+	uint8_t			offload_config;
+	/** Number of words that the module has to send */
+	uint8_t			offload_tx_len;
+	/** Number of words that the module has to receive */
+	uint8_t			offload_rx_len;
+	/** Base address where the HDL core is situated */
+	uint32_t		spi_engine_baseaddr;
+	/** Base address where the RX DMAC core is situated */
+	uint32_t		rx_dma_baseaddr;
+	/** Base address where the TX DMAC core is situated */
+	uint32_t		tx_dma_baseaddr;
+	/** Delay between the CS toggle and the start of SCLK */
+	uint8_t			cs_delay;
+	/** Clock divider used in transmission delays */
+	uint32_t		clk_div;
+	/** Data with of one SPI transfer ( in bits ) */
+	uint8_t			data_width;
+	/** The maximum data width supported by the engine */
+	uint8_t 		max_data_width;
+};
+
+
+/**
+ * @struct spi_engine_offload_init_param
+ * @brief  Structure containing the init parameters needed by the offload module
+ */
+struct spi_engine_offload_init_param {
+	/** Base address where the RX DMAC core is situated */
+	uint32_t	rx_dma_baseaddr;
+	/** Base address where the TX DMAC core is situated */
+	uint32_t	tx_dma_baseaddr;
+	/** DMAC flags - if not initialized, the default value is DMA_CYCLIC */
+	uint32_t	*dma_flags;
+	/** Offload's module transfer direction : TX, RX or both */
+	uint8_t		offload_config;
+};
+
+/**
+ * @struct spi_engine_offload_message
+ * @brief  Structure representing an offload message
+ */
+struct spi_engine_offload_message {
+	/** Pointer to the SPI engine commands buffer that will be sent.
+	 * The available commands can be found at:
+	 * https://wiki.analog.com/resources/fpga/peripherals/spi_engine/
+	*/
+	uint32_t *commands;
+	/** Length of the SPI engine commands buffer */
+	uint32_t no_commands;
+	/** Pointer of the data that will be sent over spi */
+	uint32_t *commands_data;
+	/** The address where the data that will be transmitted is situated */
+	uint32_t tx_addr;
+	/** The address where the data that will be received is situated */
+	uint32_t rx_addr;
+};
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+
+/**
+ * @brief Spi engine platform specific SPI platform ops structure
+ */
+extern const struct spi_platform_ops xil_spi_ops;
+
+/* Write SPI Engine's axi registers */
+int32_t spi_engine_write(struct spi_engine_desc *desc,
+			 uint32_t reg_addr,
+			 uint32_t reg_data);
+
+/* Read SPI Engine's axi registers */
+int32_t spi_engine_read(struct spi_engine_desc *desc,
+			uint32_t reg_addr,
+			uint32_t *reg_data);
+/* Initialize the SPI engine device */
+int32_t spi_engine_init(struct spi_desc **desc,
+			const struct spi_init_param *param);
+
+/* Write and read data over SPI using the SPI engine */
+int32_t spi_engine_write_and_read(struct spi_desc *desc,
+				  uint8_t *data,
+				  uint16_t bytes_number);
+
+/* Write and read data over SPI using the SPI engine in 3-wire mode */
+int32_t spi_engine_write_and_read_3wire(struct spi_desc *desc,
+		   uint8_t *write_data,
+		   uint8_t *read_data,
+		   uint16_t write_bytes_number,
+		   uint16_t read_bytes_number);
+/* Free the resources used by the SPI engine device */
+int32_t spi_engine_remove(struct spi_desc *desc);
+
+/* Initialize the SPI engine offload module */
+int32_t spi_engine_offload_init(struct spi_desc *desc,
+				const struct spi_engine_offload_init_param *param);
+
+/* Write and read data over SPI using the offload module */
+int32_t spi_engine_offload_transfer(struct spi_desc *desc,
+				    struct spi_engine_offload_message msg,
+				    uint32_t no_samples);
+
+/* Set SPI transfer width */
+int32_t spi_engine_set_transfer_width(struct spi_desc *desc,
+				      uint8_t data_wdith);
+
+/* Set SPI transfer speed */
+void spi_engine_set_speed(struct spi_desc *desc,
+			  uint32_t speed_hz);
+
+#endif // SPI_ENGINE_H
@@ -0,0 +1,154 @@
+/*******************************************************************************
+ *   @file   spi_engine_private.h
+ *   @brief  Private definitions of the SPI Engine
+ *   @author Sergiu Cuciurean ([email protected])
+********************************************************************************
+ * Copyright 2019(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+#ifndef SPI_ENGINE_PRIVATE_H
+#define SPI_ENGINE_PRIVATE_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "spi.h"
+#include "util.h"
+
+/******************************************************************************/
+/*************************** Spi Engine registers *****************************/
+/******************************************************************************/
+
+#define SPI_ENGINE_REG_VERSION			0x00
+#define SPI_ENGINE_REG_DATA_WIDTH		0x0C
+#define SPI_ENGINE_REG_RESET			0x40
+#define SPI_ENGINE_REG_INT_ENABLE		0x80
+#define SPI_ENGINE_REG_INT_PENDING		0x84
+#define SPI_ENGINE_REG_INT_SOURCE		0x88
+#define SPI_ENGINE_REG_SYNC_ID			0xC0
+#define SPI_ENGINE_REG_CMD_FIFO_ROOM		0xD0
+#define SPI_ENGINE_REG_SDO_FIFO_ROOM		0xD4
+#define SPI_ENGINE_REG_SDI_FIFO_LEVEL		0xD8
+#define SPI_ENGINE_REG_CMD_FIFO 		0xE0
+#define SPI_ENGINE_REG_SDO_DATA_FIFO		0xE4
+#define SPI_ENGINE_REG_SDI_DATA_FIFO		0xE8
+#define SPI_ENGINE_REG_SDI_DATA_FIFO_PEEK	0xEC
+
+/******************************************************************************/
+/************************ Spi Engine register parameters **********************/
+/******************************************************************************/
+
+#define SPI_ENGINE_INST_TRANSFER		0x00
+#define SPI_ENGINE_INST_ASSERT			0x01
+#define SPI_ENGINE_INST_CONFIG			0x02
+#define SPI_ENGINE_INST_SYNC_SLEEP		0x03
+#define SPI_ENGINE_INST_MISC			0x03
+#define SPI_ENGINE_CMD_REG_CLK_DIV		0x00
+#define SPI_ENGINE_CMD_REG_CONFIG		0x01
+#define SPI_ENGINE_CMD_DATA_TRANSFER_LEN	0x02
+#define SPI_ENGINE_MISC_SYNC			0x00
+#define SPI_ENGINE_MISC_SLEEP			0x01
+#define SPI_ENGINE_SYNC_TRANSFER_BEGIN		BIT(1)
+#define SPI_ENGINE_SYNC_TRANSFER_END		BIT(2)
+#define SPI_ENGINE_INT_CMD_ALMOST_EMPTY		BIT(0)
+#define SPI_ENGINE_INT_SDO_ALMOST_EMPTY		BIT(1)
+#define SPI_ENGINE_INT_SDI_ALMOST_FULL		BIT(2)
+#define SPI_ENGINE_INT_SYNC			BIT(3)
+#define SPI_ENGINE_OFFLOAD_CTRL_ENABLE		BIT(0)
+#define SPI_ENGINE_OFFLOAD_STATUS_ENABLED	BIT(0)
+#define SPI_ENGINE_CONFIG_CPHA			BIT(0)
+#define SPI_ENGINE_CONFIG_CPOL			BIT(1)
+#define SPI_ENGINE_CONFIG_3WIRE			BIT(2)
+#define SPI_ENGINE_VERSION_MAJOR(x) 		((x >> 16) & 0xff)
+#define SPI_ENGINE_VERSION_MINOR(x) 		((x >> 8) & 0xff)
+#define SPI_ENGINE_VERSION_PATCH(x) 		(x & 0xff)
+
+/******************************************************************************/
+/**************************** Spi Engine commands *****************************/
+/******************************************************************************/
+
+#define SPI_ENGINE_INSTRUCTION_TRANSFER_W	0x01
+#define SPI_ENGINE_INSTRUCTION_TRANSFER_R	0x02
+#define SPI_ENGINE_INSTRUCTION_TRANSFER_RW	0x03
+
+#define SPI_ENGINE_REG_OFFLOAD_CTRL(x)		(0x100 + (0x20 * x))
+#define SPI_ENGINE_REG_OFFLOAD_STATUS(x)	(0x104 + (0x20 * x))
+#define SPI_ENGINE_REG_OFFLOAD_RESET(x)		(0x108 + (0x20 * x))
+#define SPI_ENGINE_REG_OFFLOAD_CMD_MEM(x)	(0x110 + (0x20 * x))
+#define SPI_ENGINE_REG_OFFLOAD_SDO_MEM(x)	(0x114 + (0x20 * x))
+
+#define SPI_ENGINE_CMD(inst, arg1, arg2) 				\
+			(((inst & 0x03) << 12) | 			\
+			((arg1 & 0x03) << 8) | arg2 )
+
+#define SPI_ENGINE_CMD_TRANSFER(readwrite, n)				\
+	SPI_ENGINE_CMD(SPI_ENGINE_INST_TRANSFER,			\
+			(readwrite), (n))
+
+#define SPI_ENGINE_CMD_ASSERT(delay, cs) 				\
+	SPI_ENGINE_CMD(SPI_ENGINE_INST_ASSERT,				\
+			(delay), (cs))
+
+#define SPI_ENGINE_CMD_CONFIG(reg, val)					\
+	SPI_ENGINE_CMD(SPI_ENGINE_INST_CONFIG,				\
+			(reg), (val))
+
+#define SPI_ENGINE_CMD_SLEEP(delay) 					\
+	SPI_ENGINE_CMD(SPI_ENGINE_INST_MISC, 				\
+			SPI_ENGINE_MISC_SLEEP, 				\
+			(delay))
+
+#define SPI_ENGINE_CMD_SYNC(id) 					\
+	SPI_ENGINE_CMD(SPI_ENGINE_INST_MISC, 				\
+			SPI_ENGINE_MISC_SYNC, 				\
+			(id))
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+
+typedef struct spi_engine_cmd_queue {
+	uint32_t	cmd;
+	struct		spi_engine_cmd_queue *next;
+} spi_engine_cmd_queue;
+
+typedef struct spi_engine_msg {
+	uint32_t			*tx_buf;
+	uint32_t			*rx_buf;
+	uint32_t			tx_length;
+	uint32_t			rx_length;
+	struct spi_engine_cmd_queue	*cmds;
+} spi_engine_msg;
+
+#endif // SPI_ENGINE_PRIVATE_H
@@ -0,0 +1,783 @@
+/**
+ * \file ad9528.c
+ * \brief Contains source code for configuring and initializing AD9528 clock device
+ */
+
+/**
+* \page Disclaimer Legal Disclaimer
+* Copyright 2015-2017 Analog Devices Inc.
+* Released under the AD9371 API license.
+*
+*/
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "ad9528.h"
+#include "../../../include/error.h"
+
+static uint32_t _desired_time_to_elapse_ms = 0;
+
+/**
+ * \brief Write data to a register
+ */
+int32_t AD9528_spiWriteByte(ad9528Device_t *device, uint16_t addr,
+				 uint8_t data)
+{
+	uint8_t buf[3];
+	int32_t status;
+
+	buf[0] = (addr >> 8) & 0x7F;
+	buf[1] = addr & 0xFF;
+	buf[2] = data;
+	status = spi_write_and_read_3wire(device->spi_desc,
+			buf, NULL, 3, 0);
+
+	return status;
+}
+
+/**
+ * \brief Read data from a register
+ */
+int32_t AD9528_spiReadByte(ad9528Device_t *device, uint16_t addr,
+				uint8_t *readdata)
+{
+	uint8_t tx_buf[2];
+	uint8_t rx_buf[1];
+	int32_t status;
+
+	tx_buf[0] = 0x80 | addr >> 8;
+	tx_buf[1] = addr & 0xFF;
+
+	status = spi_write_and_read_3wire(device->spi_desc,
+			tx_buf, rx_buf, 2, 1);
+
+	*readdata = rx_buf[0];
+
+	return status;
+}
+
+/**
+ * \brief Modify a field of bits from a register
+ */
+int32_t AD9528_spiWriteField(ad9528Device_t *device,
+				  uint16_t addr, uint8_t fieldVal, uint8_t mask, uint8_t startBit)
+{
+	int32_t errVal;
+	uint8_t readVal;
+
+	errVal = AD9528_spiReadByte(device, addr, &readVal);
+	if (errVal < 0)
+		return errVal;
+
+	readVal = (readVal & ~mask) | ((fieldVal << startBit) & mask);
+
+	return AD9528_spiWriteByte(device, addr, readVal);
+}
+
+/**
+ * \brief Set the desired timeout value
+ */
+int32_t AD9528_setTimeout_ms(uint32_t timeOut_ms)
+{
+	_desired_time_to_elapse_ms = timeOut_ms;
+
+	return SUCCESS;
+}
+
+/**
+ * \brief Verify if the desired time has elapsed
+ */
+int32_t AD9528_hasTimeoutExpired()
+{
+	udelay(1000);
+
+	_desired_time_to_elapse_ms--;
+	if (_desired_time_to_elapse_ms > 0)
+		return SUCCESS;
+
+	return FAILURE;
+}
+
+/**
+ * \brief Performs a hard reset on the AD9528 DUT
+ *
+ * <B>Dependencies</B>
+ * - device->spiSettings->chipSelectIndex
+ *
+ * \param device is structure pointer to the AD9528 data structure containing settings
+ * \return Returns enum ADI_ERR, ADIERR_OK=pass, !ADIERR_OK=fail
+ */
+int32_t AD9528_resetDevice(ad9528Device_t *device)
+{
+	gpio_direction_output(device->gpio_resetb, 0);
+	mdelay(100);
+	gpio_direction_output(device->gpio_resetb, 1);
+	mdelay(100);
+
+	AD9528_spiWriteByte(device, AD9528_ADDR_ADI_SPI_CONFIG_A, 0x81);
+	mdelay(100);
+	AD9528_spiWriteByte(device, AD9528_ADDR_ADI_SPI_CONFIG_A, 0x00);
+	mdelay(100);
+
+	return SUCCESS;
+}
+
+/**
+ * \brief Sets the AD9528 device SPI settings (3wire/4wire, MSBFirst, etc).
+ *
+ * This function will use the settings in the device->spiSettings structure
+ * to set SPI stream mode, address auto increment direction, MSBFirst/LSBfirst,
+ * and 3wire/4wire mode.  The AD9528 device always uses SPI MODE 0 (CPHA=0, CPOL=0).
+ * This function will update your device->spiSettings to set CHPA=0 and CPOL=0 and
+ * longInstructionWord =1 to use a 16bit instruction word.
+ *
+ * <B>Dependencies</B>
+ * - writes device->spiSettings->CPHA = 0
+ * - writes device->spiSettings->CPOL = 0
+ * - writes device->spiSettings->longInstructionWord = 1
+ *
+ * - device->spiSettings->MSBFirst
+ * - device->spiSettings->enSpiStreaming
+ * - device->spiSettings->autoIncAddrUp
+ * - device->spiSettings->fourWireMode
+ *
+ * \param device is structure pointer to the AD9528 data structure containing settings
+ *
+ * \return Returns enum ADI_ERR, ADIERR_OK=pass, !ADIERR_OK=fail
+ */
+int32_t AD9528_setSpiSettings(ad9528Device_t *device)
+{
+	uint8_t spiReg = 0;
+
+	device->spiSettings->CPHA = 0;
+	device->spiSettings->CPOL = 0;
+	device->spiSettings->longInstructionWord = 1;
+
+	if (device->spiSettings->MSBFirst == 0) {
+		spiReg |= 0x42; /* SPI bit is 1=LSB first */
+	}
+
+	if (device->spiSettings->autoIncAddrUp > 0) {
+		spiReg |= 0x24;
+	}
+
+	if (device->spiSettings->fourWireMode > 0) {
+		spiReg |= 0x18;
+	}
+
+	AD9528_spiWriteByte(device, AD9528_ADDR_ADI_SPI_CONFIG_A, spiReg);
+
+	if (device->spiSettings->enSpiStreaming > 0) {
+		/* Allow SPI streaming mode: SPI message ends when chip select deasserts */
+		AD9528_spiWriteByte(device, AD9528_ADDR_ADI_SPI_CONFIG_B, 0x00);
+	} else {
+		/* Force single instruction mode */
+		AD9528_spiWriteByte(device, AD9528_ADDR_ADI_SPI_CONFIG_B, 0x80);
+	}
+
+	return SUCCESS;
+}
+
+/**
+ * \brief Helper function for ADI transceiver eval boards to init the AD9528 data structure
+ *
+ * This function inits the AD9528 device data structure with defaults that
+ * are known to work with the ADI AD9369 and AD9371 evaluation boards.  NOTE: This function will
+ * modify the contents of the AD9528 device data structure.
+ *
+ * <B>Dependencies</B>
+ * - spi->chipSelectIndex
+ * - spi
+ *
+ * \param device Pointer to the AD9528 device data structure to initialize
+ * \param vcxoFrequency_Hz The VCXO frequency that is connected to the AD9528
+ * \param refAFrequency_Hz The reference clock frequency being input into the AD9528 REFCLK A input
+ * \param outputDeviceClock_Hz Desired output clock frequency to the FPGA and transceiver device
+ *
+ * \return Returns enum ADI_ERR, 0=pass, >0 = fail
+*/
+int32_t AD9528_initDeviceDataStruct(ad9528Device_t *device,
+					uint32_t vcxoFrequency_Hz, uint32_t refAFrequency_Hz,
+					uint32_t outputDeviceClock_Hz)
+{
+//	uint16_t chDiv;
+//	uint8_t i = 0;
+//
+//	uint32_t pll1PfdFreq_Hz = 0;
+//	uint8_t pll1Ndiv = 0;
+//	uint8_t validPll1DivSetting = 0;
+//	uint8_t refAdiv = 1;
+//
+//
+//	uint8_t pll2RfDiv = 3; /* Valid values 3,4,5 */
+//	uint16_t pll2Ndiv = 1; /* Valid values 1-256 */
+//	uint32_t pll2InputFreq_Hz = 0;
+//	uint64_t pll2VcoFreq_Hz = 0;
+//	uint16_t pll2NdivStart = 0;
+//	uint8_t validPll2DivSetting = 0;
+//	uint64_t chDivU64 = 0;
+//
+//	static const uint64_t PLL2_MIN_VCO_FREQ_HZ = 3450000000ULL;
+//	static const uint64_t PLL2_MAX_VCO_FREQ_HZ = 4025000000ULL;
+
+//	struct spi_init_param spi_param;
+//	int32_t status;
+//
+//	status = gpio_get(&device->gpio_resetb, CLK_RESETB);
+//	status |= gpio_get(&device->gpio_sysref_req, ADRV_SYSREF_REQ);
+//
+//	spi_param.id = 0;
+//	spi_param.mode = SPI_MODE_0;
+//	spi_param.chip_select = CLK_CS;
+//	status |= spi_init(&device->spi_desc, &spi_param);
+//
+//	if (status != SUCCESS)
+//		return FAILURE;
+
+	/*******************************************************************
+	 * PLL1 Settings
+	 *******************************************************************
+	 */
+
+	/* find valid PLL1 Ndiv and REFA div */
+//	for (pll1Ndiv = 1; pll1Ndiv < 20; pll1Ndiv++) {
+//		pll1PfdFreq_Hz = vcxoFrequency_Hz / pll1Ndiv;
+//
+//		if ((pll1PfdFreq_Hz <= 110000000) && (pll1PfdFreq_Hz >= 1000000) &&
+//		    (pll1PfdFreq_Hz <= refAFrequency_Hz) &&
+//		    (refAFrequency_Hz % pll1PfdFreq_Hz == 0)
+//		   ) {
+//			validPll1DivSetting = 1;
+//			refAdiv = refAFrequency_Hz / pll1PfdFreq_Hz ;
+//			break;
+//		}
+//	}
+//
+//	if (validPll1DivSetting == 0) {
+//		return FAILURE;
+//	}
+
+//	device->pll1Settings->nDivider =
+//		pll1Ndiv; //This init function always runs PLL1 at 30.72MHz Pfd rate
+//	device->pll1Settings->refA_bufferCtrl =
+//		DIFFERENTIAL;	   //DISABLED = 0, SINGLE_ENDED, NEG_SINGLE_ENDED, DIFFERENTIAL
+//	device->pll1Settings->refA_Divider = refAdiv;
+//	device->pll1Settings->refA_Frequency_Hz = refAFrequency_Hz;
+//	device->pll1Settings->refB_bufferCtrl =
+//		DISABLED;		   //DISABLED = 0, SINGLE_ENDED, NEG_SINGLE_ENDED, DIFFERENTIAL
+//	device->pll1Settings->refB_Divider = 1;
+//	device->pll1Settings->refB_Frequency_Hz = 0;
+//	device->pll1Settings->vcxoBufferCtrl  =
+//		NEG_SINGLE_ENDED;   //DISABLED = 0, SINGLE_ENDED, NEG_SINGLE_ENDED, DIFFERENTIAL
+//	device->pll1Settings->vcxo_Frequency_Hz = vcxoFrequency_Hz;
+
+	/*******************************************************************
+	 * PLL2 Settings
+	 *******************************************************************
+	 */
+
+	/*******************************************************************
+	 * Output Distribution Settings
+	 * 9369CE02A uses the following clock outputs
+	 * OUT 1: FPGA REFCLK
+	 * OUT 3: FPGA SYSREF
+	 * OUT 12: DUT SYSREF
+	 * OUT 13: DUT REFCLK
+	 *******************************************************************
+	 */
+
+	/* PLL 2 input clock can be several different things.  Currently hard coded by this init funciton to use
+	 * PLL 1 output (VCXO Frequency) with no scaling
+	 */
+//	pll2InputFreq_Hz = device->pll1Settings->vcxo_Frequency_Hz;
+//	validPll2DivSetting = 0;
+
+	/* Sweep PLL2 Divider settings to find something that has a valid integer divide (3,4,5)*/
+//	for (pll2RfDiv = 3; pll2RfDiv <= 5; pll2RfDiv++) {
+//
+//		pll2NdivStart = (PLL2_MIN_VCO_FREQ_HZ / pll2RfDiv / pll2InputFreq_Hz);
+//		/* find valid PLL2 Ndiv (1-256) */
+//		for (pll2Ndiv = pll2NdivStart; pll2Ndiv <= 256; pll2Ndiv++) {
+//			pll2VcoFreq_Hz = (pll2InputFreq_Hz * pll2RfDiv * pll2Ndiv);
+//
+//			if (pll2VcoFreq_Hz < PLL2_MIN_VCO_FREQ_HZ) {
+//				/* Continue to next PLL2 N div */
+//				continue;
+//			} else if (pll2VcoFreq_Hz > PLL2_MAX_VCO_FREQ_HZ) {
+//				/* Break to next PLL2 RF div */
+//				break;
+//			}
+//
+//			if (((pll2VcoFreq_Hz / pll2RfDiv) % outputDeviceClock_Hz) == 0) {
+//
+//				device->pll2Settings->rfDivider = pll2RfDiv;
+//				device->pll2Settings->n2Divider = pll2Ndiv;
+//				device->pll2Settings->totalNdiv = pll2RfDiv * pll2Ndiv;
+//				chDivU64 = ((pll2VcoFreq_Hz / pll2RfDiv) / outputDeviceClock_Hz);
+//
+//				if ((chDivU64 < 1) || (chDivU64 > 256)) {
+//					return FAILURE;
+//				} else {
+//					chDiv = (uint16_t)(chDivU64);
+//				}
+//
+//				validPll2DivSetting = 1;
+//				break;
+//			}
+//		}
+//
+//		if (validPll2DivSetting == 1) {
+//			break;
+//		}
+//	}
+//
+//	if (validPll2DivSetting == 0) {
+//		return FAILURE;
+//	}
+//
+//	device->outputSettings->outPowerDown = (uint16_t)(
+//			~0x318A);	 //enable outputs 13,12,8,7,3 and 1
+//
+//	for (i=0; i<14; i++) {
+//		device->outputSettings->outSource[i] =
+//			CHANNEL_DIV; //CHANNEL_DIV , PLL1_OUTPUT, SYSREF, INV_PLL1_OUTPUT
+//		device->outputSettings->outBufferCtrl[i] = LVDS;		//LVDS, LVDS_BOOST, HSTL
+//		device->outputSettings->outChannelDiv[i] = chDiv;
+//		device->outputSettings->outFrequency_Hz[i] = outputDeviceClock_Hz;
+//		device->outputSettings->outAnalogDelay[i] = 0;
+//		device->outputSettings->outDigitalDelay[i] = 0;
+//	}
+//
+//
+//	device->outputSettings->outSource[3] = SYSREF;
+//	device->outputSettings->outSource[7] = SYSREF;
+//	device->outputSettings->outSource[12] = SYSREF;
+//
+//
+//	device->sysrefSettings->sysrefDivide =
+//		512; //SYSREF frequency = VCXO / 2 / sysrefDivde
+//	device->sysrefSettings->sysrefNshotMode =
+//		ONE_PULSE;		//ONE_PULSE=0, TWO_PULSES=2, FOUR_PULSES=3, SIX_PULSES=4, EIGHT_PULSES=5
+//	device->sysrefSettings->sysrefPatternMode =
+//		CONTINUOUS;		  //NSHOT=0, CONTINUOUS=1, PRBS=2, STOP=3
+//	device->sysrefSettings->sysrefPinBufferMode =
+//		DISABLED;	 //DISABLED = 0, SINGLE_ENDED, NEG_SINGLE_ENDED, DIFFERENTIAL
+//	device->sysrefSettings->sysrefPinEdgeMode =
+//		LEVEL_ACTIVE_HIGH;  //LEVEL_ACTIVE_HIGH=0, LEVEL_ACTIVE_LOW=1, RISING_EDGE=2, FALLING_EDGE=3
+//	device->sysrefSettings->sysrefRequestMethod = PIN;		  //SPI=0,PIN=1
+//	device->sysrefSettings->sysrefSource =
+//		INTERNAL;			//EXTERNAL=0, EXT_RESAMPLED=1, INTERNAL=2
+
+	return SUCCESS;
+}
+
+int32_t AD9528_init(ad9528Device_t **device, const ad9528Init_t *init_device)
+{
+	int ret = SUCCESS;
+	ad9528Device_t *dev;
+
+	dev = (ad9528Device_t *)malloc(sizeof(*dev));
+	if (!dev)
+		return FAILURE;
+
+	/* SPI */
+	ret = spi_init(&dev->spi_desc, init_device->spi_init);
+	ret |= gpio_get(&dev->gpio_resetb, init_device->gpio_init_resetb);
+	ret |= gpio_get(&dev->gpio_sysref_req, init_device->gpio_init_sysref_req);
+
+	gpio_direction_output(dev->gpio_resetb, 0);
+	gpio_direction_output(dev->gpio_sysref_req, 0);
+
+	AD9528_resetDevice(dev);
+
+	dev->spiSettings = init_device->spiSettings;
+	dev->pll1Settings = init_device->pll1Settings;
+	dev->pll2Settings = init_device->pll2Settings;
+	dev->outputSettings = init_device->outputSettings;
+	dev->sysrefSettings = init_device->sysrefSettings;
+
+	*device = dev;
+
+	return ret;
+}
+
+/**
+ * \brief Initializes the AD9528 by writing all SPI registers
+ *
+ * Initializes the AD9528 for use with the AD9369 transceiver.  Designed to work with
+ * a reference clock of 122.88MHz.  Reference clock is expected to be 30.72MHz.
+ * The output clocks from the AD9528 can run at 122.88M, 153.6M, 184.32M, 245.76M, or 307.2M.
+ * Typical setup: REFA frequency = 30.72, VCXO = 122.88MHz
+ * SYNC(SYSREF) pulses output at rate of 120kHz
+ *
+ * <B>Dependencies</B>
+ * - All parameters in device structure
+ *
+ * \param device is structure pointer to AD9528 clock device structure
+ *
+ * \return Returns enum ADI_ERR, 0=pass, >0 = fail
+ */
+int32_t AD9528_config(ad9528Device_t
+			      *device)   //writes all registers to desired values, leaves clock outputs off, SYSREF output disabled.
+{
+	uint8_t pll2_Adiv=0;
+	uint8_t pll2_Bdiv=0;
+	uint8_t reg108=0;
+	uint8_t reg109=0x4;
+	uint8_t i = 0;
+	uint8_t j = 0;
+	uint8_t reg508;
+	int32_t retval = SUCCESS;
+
+	retval = AD9528_setSpiSettings(device);
+	if (retval != SUCCESS) {
+		return retval;
+	}
+
+	/**********************************************************************
+	 * Configure PLL1
+	 **********************************************************************
+	 */
+
+	AD9528_spiWriteByte(device, AD9528_ADDR_REF_A_DIVIDER_LSB,
+			    device->pll1Settings->refA_Divider & 0xFF);		//REF A div[7:0]
+	AD9528_spiWriteByte(device, AD9528_ADDR_REF_A_DIVIDER_MSB,
+			    (device->pll1Settings->refA_Divider >> 8) & 0x03); //REF A div[9:8]
+	AD9528_spiWriteByte(device, AD9528_ADDR_REF_B_DIVIDER_LSB,
+			    device->pll1Settings->refB_Divider & 0xFF);		//REF B div[7:0]
+	AD9528_spiWriteByte(device, AD9528_ADDR_REF_B_DIVIDER_MSB,
+			    (device->pll1Settings->refB_Divider >> 8) & 0x03); //REF B div[9:8]
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL1_N_DIV_LSB,
+			    device->pll1Settings->nDivider & 0xFF); //PLL1 N div[7:0]
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL1_N_DIV_MSB,
+			    (device->pll1Settings->nDivider >> 8) & 0x03); //PLL1 N div[9:8]
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL1_CHARGEPUMP,
+			    0x0A); //PLL1 Charge Pump control 1
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL1_CP_CTRL2,
+			    0x03); //PLL1 Charge Pump control 2
+
+	switch (device->pll1Settings->refA_bufferCtrl) {
+	case DISABLED:
+		reg108 &= ~0x28;
+		reg109 &= ~0x01;
+		break; //clear all REFA enable bits
+	case SINGLE_ENDED:
+		reg108 |=  0x08;
+		reg109 &= ~0x01;
+		break; //Set REFA receiver enable, clear REFA SE negative input enable
+	case NEG_SINGLE_ENDED:
+		reg108 |=  0x08;
+		reg108 &= ~0x10;
+		reg109 |= 0x01;
+		break; //Disable REFA diff receiver, enable REFA receiver and use negative REFA input
+	case DIFFERENTIAL:
+		reg108 |=  0x28;
+		reg109 &= ~0x01;
+		break;
+	default:
+		reg108 |=  0x08;
+		reg109 &= ~0x01;
+		break; //default to single ended case
+	}
+	switch (device->pll1Settings->refB_bufferCtrl) {
+	case DISABLED:
+		reg108 &= ~0x50;
+		reg109 &= ~0x02;
+		break; //clear all REFB enable bits
+	case SINGLE_ENDED:
+		reg108 |=  0x10;
+		reg109 &= ~0x02;
+		break; //Set REFB receiver enable, clear REFB SE negative input enable
+	case NEG_SINGLE_ENDED:
+		reg108 |=  0x10;
+		reg108 &= ~0x40;
+		reg109 |= 0x02;
+		break; //Disable REFB diff receiver, enable REFB receiver and use negative REFB input
+	case DIFFERENTIAL:
+		reg108 |=  0x50;
+		reg109 &= ~0x02;
+		break;
+	default:
+		reg108 |=  0x10;
+		reg109 &= ~0x02;
+		break; //default to single ended case
+	}
+	switch (device->pll1Settings->vcxoBufferCtrl) {
+	case DISABLED:
+		reg108 &= ~0x03;
+		reg108 |=  0x04;
+		break; //power down VCXO input
+	case SINGLE_ENDED:
+		reg108 &= ~0x07;
+		break; //Clear VCXO receiver power down, defaults to Single ended mode
+	case NEG_SINGLE_ENDED:
+		reg108 &= ~0x07;
+		reg108 |=  0x02;
+		break; //Clear VCXO power down, enable Negative single ended mode[1]
+	case DIFFERENTIAL:
+		reg108 &= ~0x07;
+		reg108 |=  0x01;
+		break; //Clear VCXO power down, enable differential input buffer[0]
+	default:
+		reg108 &= ~0x07;
+		break; //default to positive single ended case
+	}
+
+
+	AD9528_spiWriteByte(device, AD9528_ADDR_INPUT_RECEIVERS1,
+			    reg108); //Input receiver settings (single ended or differential clock inputs)
+	AD9528_spiWriteByte(device, AD9528_ADDR_INPUT_RECEIVERS2,
+			    reg109); //Input receiver settings
+	AD9528_spiWriteByte(device, AD9528_ADDR_INPUT_RECEIVERS3,
+			    0x0A); //Reference selection mode
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL1_FASTLOCK,
+			    0x00); //Disable Fast lock
+
+	/**********************************************************************
+	 * Configure PLL2
+	 **********************************************************************
+	 */
+	pll2_Bdiv = device->pll2Settings->totalNdiv / 4;
+	pll2_Adiv = device->pll2Settings->totalNdiv % 4;
+
+	if (pll2_Adiv > 3) {  //A div valid range (0 to 3)
+		return FAILURE;
+	}
+	if (pll2_Bdiv < 3 || pll2_Bdiv > 63) {
+		return FAILURE;
+	}
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL2_CHARGEPUMP,
+			    0xE6); //PLL2 Charge Pump[7:0]
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL2_N_DIV,
+			    ((pll2_Adiv & 0x3) << 6) | (pll2_Bdiv & 0x3F)); //PLL2 A and B divider
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL2_CTRL, 0x03); //PLL2 control
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL2_VCO_CTRL, 0x01); //Manual VCO CAL
+
+	if (device->pll2Settings->rfDivider < 3
+	    || device->pll2Settings->rfDivider > 5) {
+		return FAILURE;
+	}
+
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL2_VCO_DIV,
+			    device->pll2Settings->rfDivider); //VCO divider
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL2_LF_CTRL1,
+			    0x3A); //PLL2 Loop filter [7:0]
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL2_LF_CTRL2,
+			    0x00); //PLL2 Loop filter [8]
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL2_RDIV, 0x01); //R divider
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL2_REPLICA_CHDIV,
+			    (device->pll2Settings->totalNdiv / device->pll2Settings->rfDivider)
+			    -1 ); //Replica channel divider: Ndivider = rfDivider * R divider
+	AD9528_spiWriteByte(device, AD9528_ADDR_PLL2_REPLICA_DIV_PHASE,
+			    0x00); //Replica Channel Divider phase
+
+	/**********************************************************************
+	 * Configure Output Distribution
+	 **********************************************************************
+	 */
+	for (i=0; i<14; i=i+1) {
+		AD9528_spiWriteByte(device, AD9528_ADDR_CH_OUT0_CTRL1 + j,
+				    ((device->outputSettings->outSource[i] & 0x7) << 5) |
+				    (device->outputSettings->outAnalogDelay[i] & 0x1F));
+		AD9528_spiWriteByte(device, AD9528_ADDR_CH_OUT0_CTRL2 + j,
+				    ((device->outputSettings->outBufferCtrl[i] & 0x3) << 6) |
+				    (device->outputSettings->outDigitalDelay[i] & 0x3F));
+		AD9528_spiWriteByte(device, AD9528_ADDR_CH_OUT0_CHDIV + j,
+				    device->outputSettings->outChannelDiv[i]-1);
+		j = j+3;
+	}
+
+	AD9528_spiWriteByte(device, AD9528_ADDR_OUTPUT_SYNC, 0x00); //Sync outputs
+	AD9528_spiWriteByte(device, AD9528_ADDR_MASK_SYNC1, 0x00); //Mask SYNC[7:0]
+	AD9528_spiWriteByte(device, AD9528_ADDR_MASK_SYNC2, 0x00); //Mask SYNC[13:8]
+	AD9528_spiWriteByte(device, AD9528_ADDR_EN_OUTPUT_PATH_SEL1,
+			    0x00); //Bypass SYSREF resample [6:0], bit0:Enable VCXO to feed output distrubution
+	AD9528_spiWriteByte(device, AD9528_ADDR_EN_OUTPUT_PATH_SEL2,
+			    0x00); //Bypass SYSREF resample [13:7]
+
+	/**********************************************************************
+	 * Configure SYSREF operation
+	 **********************************************************************
+	 */
+	AD9528_spiWriteByte(device, AD9528_ADDR_SYSERF_DIV_LSB,
+			    device->sysrefSettings->sysrefDivide & 0xFF); //SYSREF divider [7:0]
+	AD9528_spiWriteByte(device, AD9528_ADDR_SYSERF_DIV_MSB,
+			    (device->sysrefSettings->sysrefDivide >> 8) & 0xFF); //SYSREF divider [7:0]
+
+	AD9528_spiWriteByte(device, AD9528_ADDR_SYSREF_CTRL3,
+			    ((device->sysrefSettings->sysrefRequestMethod & 0x1) << 7) |
+			    ((device->sysrefSettings->sysrefPinEdgeMode & 0x3) << 5) );
+
+	AD9528_spiWriteByte(device, AD9528_ADDR_SYSREF_CTRL4,
+			    ((device->sysrefSettings->sysrefSource & 0x03) << 6) |
+			    ((device->sysrefSettings->sysrefPatternMode & 0x3) << 4 ) |
+			    ((device->sysrefSettings->sysrefNshotMode & 0x7) << 1) );
+
+	if(device->sysrefSettings->sysrefPinBufferMode == DISABLED) {
+		AD9528_spiWriteByte(device, AD9528_ADDR_SYSREF_CTRL5,
+				    0x04); //power down input buffer for external SYSREF
+	} else if(device->sysrefSettings->sysrefPinBufferMode == SINGLE_ENDED) {
+		AD9528_spiWriteByte(device, AD9528_ADDR_SYSREF_CTRL5,
+				    0x00); //enable positive singled ended input
+	} else if(device->sysrefSettings->sysrefPinBufferMode == NEG_SINGLE_ENDED) {
+		AD9528_spiWriteByte(device, AD9528_ADDR_SYSREF_CTRL5,
+				    0x02); //enable negative singled ended input
+	} else if(device->sysrefSettings->sysrefPinBufferMode == DIFFERENTIAL) {
+		AD9528_spiWriteByte(device, AD9528_ADDR_SYSREF_CTRL5,
+				    0x01); //enable differential input buffer
+	} else {
+		AD9528_spiWriteByte(device, AD9528_ADDR_SYSREF_CTRL5,
+				    0x04); //power down input buffer for external SYSREF
+	}
+
+	/**********************************************************************
+	 * Power down control
+	 **********************************************************************
+	 */
+
+	if (device->pll1Settings->bypassPll1 > 0) {
+		AD9528_spiWriteByte(device, AD9528_ADDR_POWERDOWN_CTRL,
+				    0x14);// power up PLL2 and output distribution, power down PLL1
+	} else {
+		AD9528_spiWriteByte(device, AD9528_ADDR_POWERDOWN_CTRL,
+				    0x10);// power up PLL1, PLL2 and output distribution
+	}
+
+	AD9528_spiWriteByte(device, AD9528_ADDR_CH_POWERDOWN1,
+			    device->outputSettings->outPowerDown & 0xFF); //power down out[7:0]
+	AD9528_spiWriteByte(device, AD9528_ADDR_CH_POWERDOWN2,
+			    ((device->outputSettings->outPowerDown >> 8) & 0x3F)); //power down out[13:8]
+	AD9528_spiWriteByte(device, AD9528_ADDR_LDO_ENABLES1,
+			    0xFF); //LDO enable per output channel [7:0]
+	AD9528_spiWriteByte(device, AD9528_ADDR_LDO_ENABLES2,
+			    0xFF); //LDO enable per output channel [15:8]
+	AD9528_spiWriteByte(device, AD9528_ADDR_STATUS0_CTRL,
+			    0x07); //STATUS 0 outputs REFA present
+	AD9528_spiWriteByte(device, AD9528_ADDR_STATUS1_CTRL,
+			    0x01); //STATUS 1 outputs PLL1 and PLL2 locked
+	AD9528_spiWriteByte(device, AD9528_ADDR_STATUS_OE,
+			    0x0C);// Make Status0 and Status1 outputs after reset.
+
+	AD9528_spiWriteByte(device, AD9528_ADDR_IO_UPDATE,
+			    0x01); //IO update to make all these settings valid in the 9528
+
+	AD9528_setTimeout_ms(1000);
+
+	do {
+		AD9528_spiReadByte(device, AD9528_ADDR_STATUS_READBACK0, &reg508);
+		if(AD9528_hasTimeoutExpired() > 0) {
+			return FAILURE;
+		}
+	} while((reg508 & 0x26) != 0x26);
+
+	return SUCCESS;
+}
+
+
+/// Send a SPI message to request a SYSREF pulse or continuous SYSREF from the AD9528.
+/*******************************************************************************//**
+ * Requests a SYSREF from the AD9528.  It will use whatever settings for SYSREF
+ * that are current configured in the AD9528.  This could be a single pulse,
+ * multiple pulses, or continuous pulses.
+ * <B>Dependencies</B>
+ * - device->spiSettings
+ * - device->sysrefSettings->sysrefPatternMode
+ *
+ * \param device is structure pointer to AD9528 clock device structure
+ * \param enableSYSREF If NSHOT SYSREF mode, this parameter is ignored.  If PRBS/CONTINUOUS SYSREF mode, 1= enable SYSREF, 0= disable SYSREF.
+ *
+ * \return Returns enum ADI_ERR, 0=pass, >0 = fail
+ ***********************************************************************************/
+int32_t AD9528_requestSysref(ad9528Device_t *device, uint8_t enableSYSREF)
+{
+	uint8_t _enableSYSREF=0;
+
+	if (device->sysrefSettings->sysrefPatternMode == NSHOT || enableSYSREF > 0) {
+		_enableSYSREF = 1;
+	} else {
+		_enableSYSREF = 0;
+	}
+
+	AD9528_spiWriteField(device, AD9528_ADDR_SYSREF_CTRL4, _enableSYSREF, 0x01,
+			     0x00); //Set SPI SYSREF request bit
+	AD9528_spiWriteByte(device, AD9528_ADDR_IO_UPDATE,
+			    0x01); //IO update to make all these settings valid in the 9528
+
+	return SUCCESS;
+}
+
+/// Allow changing the 9528 SYSREF frequency and pattern mode(CONTINUOUS, PRBS vs NSHOT mode)
+/*******************************************************************************//**
+ * NOTE: this function will update the device structure with the parameter values passed
+ * into this function. The device->sysrefSettings->sysrefPatternMode, device->sysrefSettings->sysrefNshotMode,
+ * and device->sysrefSettings->sysrefDivide values will be updated in the device structure.
+ *
+ * <B>Dependencies</B>
+ * - device->spiSettings
+ *
+ * \param device is structure pointer to AD9528 clock device structure
+ * \param divideFromPll1Out Sets the SYSREF pulse frequency. SYSREF frequency = PLL1_VCXO frequency/divideFromPll1Out
+ * \param sysrefPatternMode Valid settings: NSHOT, CONTINUOUS, PRBS, STOP
+ * \param nShotPulses Valid settings: ONE_PULSE=0, TWO_PULSES=2, FOUR_PULSES=3, SIX_PULSES=4, EIGHT_PULSES=5
+ *
+ * \return Returns enum ADI_ERR, 0=pass, >0 = fail
+ ***********************************************************************************/
+int32_t AD9528_setupSYSREF(ad9528Device_t *device,
+			       uint16_t divideFromPll1Out,  sysrefPatternMode_t sysrefPatternMode,
+			       sysrefNshotMode_t nShotPulses)
+{
+	uint8_t reg403=0;
+
+	device->sysrefSettings->sysrefPatternMode = sysrefPatternMode;
+	device->sysrefSettings->sysrefNshotMode = nShotPulses;
+	device->sysrefSettings->sysrefDivide = divideFromPll1Out >>
+					       1;  //SYSREF frequency is (PLL1)VCXO frequency / 2 / device->sysrefSettings->sysrefDivide
+
+	AD9528_spiReadByte(device, AD9528_ADDR_SYSREF_CTRL4, &reg403);
+
+	reg403 = reg403 & ~0x01; //clear bit 0 to stop a continuous sysref if it is on.
+	AD9528_spiWriteByte(device, AD9528_ADDR_SYSREF_CTRL4, reg403);
+
+	reg403 = reg403 & ~0x3E; //clear bits for pattern mode and Nshot mode bitfields
+	reg403 = reg403 | ((sysrefPatternMode & 0x3) << 4) | ((nShotPulses & 0x7) << 1);
+	AD9528_spiWriteByte(device, AD9528_ADDR_SYSREF_CTRL4,
+			    reg403); //update internal sysref pattern mode and Nshot mode (number of pulses)
+
+	//SYSREF request bit x403[0] is left 0.  The next call to AD9528_requestSysref will start the SYSREF
+	AD9528_spiWriteByte(device, AD9528_ADDR_IO_UPDATE,
+			    0x01); //IO update to make all these settings valid in the 9528
+
+
+	return SUCCESS;
+}
+
+int32_t AD9528_sysrefReq(ad9528Device_t *device,
+			     ad9528SysrefReqMode_t mode)
+{
+	if (mode == SYSREF_CONT_ON)
+		gpio_direction_output(device->gpio_sysref_req, 1);
+	else if (mode == SYSREF_CONT_OFF)
+		gpio_direction_output(device->gpio_sysref_req, 0);
+	else if (mode == SYSREF_PULSE) {
+		gpio_direction_output(device->gpio_sysref_req, 1);
+		mdelay(1);
+		gpio_direction_output(device->gpio_sysref_req, 0);
+	} else
+		return FAILURE;
+
+	return SUCCESS;
+}
+
+/**
+ * \brief Free the allocated resources
+ */
+int32_t AD9528_remove(ad9528Device_t *device)
+{
+	int32_t status;
+
+	status = gpio_remove(device->gpio_resetb);
+	status |= gpio_remove(device->gpio_sysref_req);
+	status |= spi_remove(device->spi_desc);
+
+	return SUCCESS;
+}
@@ -0,0 +1,245 @@
+/**
+ * \file ad9528.h
+ * \brief Contains function declarations and ad9528Device_t structure typedef for ad9528.c
+ */
+
+/**
+* \page Disclaimer Legal Disclaimer
+* Copyright 2015-2017 Analog Devices Inc.
+* Released under the AD9371 API license.
+*
+*/
+
+#ifndef _AD9528_H_
+#define _AD9528_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdint.h>
+#include "delay.h"
+#include "spi.h"
+#include "gpio.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+
+/* AD9528 SPI Address defines */
+#define AD9528_ADDR_ADI_SPI_CONFIG_A	0x000
+#define AD9528_ADDR_ADI_SPI_CONFIG_B	0x001
+#define AD9528_ADDR_IO_UPDATE		 	0x00F
+
+#define AD9528_ADDR_REF_A_DIVIDER_LSB	0x100
+#define AD9528_ADDR_REF_A_DIVIDER_MSB	0x101
+#define AD9528_ADDR_REF_B_DIVIDER_LSB	0x102
+#define AD9528_ADDR_REF_B_DIVIDER_MSB	0x103
+#define AD9528_ADDR_PLL1_N_DIV_LSB		0x104
+#define AD9528_ADDR_PLL1_N_DIV_MSB		0x105
+#define AD9528_ADDR_PLL1_CHARGEPUMP		0x106
+#define AD9528_ADDR_PLL1_CP_CTRL2		0x107
+#define AD9528_ADDR_INPUT_RECEIVERS1	0x108
+#define AD9528_ADDR_INPUT_RECEIVERS2	0x109
+#define AD9528_ADDR_INPUT_RECEIVERS3	0x10A
+#define AD9528_ADDR_PLL1_FASTLOCK		0x10B
+
+#define AD9528_ADDR_PLL2_CHARGEPUMP		0x200
+#define AD9528_ADDR_PLL2_N_DIV			0x201
+#define AD9528_ADDR_PLL2_CTRL			0x202
+#define AD9528_ADDR_PLL2_VCO_CTRL		0x203
+#define AD9528_ADDR_PLL2_VCO_DIV		0x204
+#define AD9528_ADDR_PLL2_LF_CTRL1		0x205
+#define AD9528_ADDR_PLL2_LF_CTRL2		0x206
+#define AD9528_ADDR_PLL2_RDIV			0x207
+#define AD9528_ADDR_PLL2_REPLICA_CHDIV	0x208
+#define AD9528_ADDR_PLL2_REPLICA_DIV_PHASE	0x209
+
+#define AD9528_ADDR_CH_OUT0_CTRL1		0x300
+#define AD9528_ADDR_CH_OUT0_CTRL2		0x301
+#define AD9528_ADDR_CH_OUT0_CHDIV		0x302
+#define AD9528_ADDR_OUTPUT_SYNC			0x32A
+#define AD9528_ADDR_MASK_SYNC1			0x32B
+#define AD9528_ADDR_MASK_SYNC2			0x32C
+#define AD9528_ADDR_EN_OUTPUT_PATH_SEL1	0x32D
+#define AD9528_ADDR_EN_OUTPUT_PATH_SEL2 0x32E
+
+#define AD9528_ADDR_SYSERF_DIV_LSB		0x400
+#define AD9528_ADDR_SYSERF_DIV_MSB		0x401
+#define AD9528_ADDR_SYSREF_CTRL3		0x402
+#define AD9528_ADDR_SYSREF_CTRL4		0x403
+#define AD9528_ADDR_SYSREF_CTRL5		0x404
+
+#define AD9528_ADDR_POWERDOWN_CTRL		0x500
+#define AD9528_ADDR_CH_POWERDOWN1		0x501
+#define AD9528_ADDR_CH_POWERDOWN2		0x502
+#define AD9528_ADDR_LDO_ENABLES1		0x503
+#define AD9528_ADDR_LDO_ENABLES2		0x504
+#define AD9528_ADDR_STATUS0_CTRL		0x505
+#define AD9528_ADDR_STATUS1_CTRL		0x506
+#define AD9528_ADDR_STATUS_OE			0x507
+#define AD9528_ADDR_STATUS_READBACK0	0x508
+#define AD9528_ADDR_STATUS_READBACK1	0x509
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+
+///Enum to select what source outputs from each AD9528 output channel
+typedef enum {
+	AD9528_CHANNEL_DIV = 0, PLL1_OUTPUT = 1, //VCXO frequency
+	SYSREF = 2,
+	INV_PLL1_OUTPUT = 5 //VCXO inverted
+} ad9528outSourceSel_t;
+
+///Enum to select what output buffer standard is used for the clock outputs
+typedef enum {
+	AD9528_LVDS = 0, AD9528_LVDS_BOOST = 1, AD9528_HSTL = 2
+} ad9528outBufferControl_t;
+
+///Enum to select the clock input buffer mode.
+typedef enum {
+	DISABLED = 0, SINGLE_ENDED, NEG_SINGLE_ENDED, DIFFERENTIAL
+} ad9528RefBuffer_t;
+
+/// Structure to hold AD9528 PLL1 settings
+typedef struct {
+	uint32_t refA_Frequency_Hz;
+	uint16_t refA_Divider;
+	ad9528RefBuffer_t refA_bufferCtrl;
+
+	uint32_t refB_Frequency_Hz;
+	uint16_t refB_Divider;
+	ad9528RefBuffer_t refB_bufferCtrl;
+
+	uint32_t vcxo_Frequency_Hz;
+	ad9528RefBuffer_t vcxoBufferCtrl;
+
+	uint16_t nDivider;
+	uint8_t bypassPll1;
+} ad9528pll1Settings_t;
+
+/// Structure to hold AD9528 PLL2 settings
+typedef struct {
+	uint8_t rfDivider; //VCO divider: Valid range (3,4,5)
+	uint8_t n2Divider; //PLL2 N2 Divider
+	uint8_t totalNdiv; //NDiv = 4*Bdiv + Adiv //Bdiv valid range (3 to 63), Adiv valid range (0-3)
+} ad9528pll2Settings_t;
+
+/// Structure to hold AD9528 Output Clock settings
+typedef struct {
+	uint16_t outPowerDown; //bit per output, if 1 power down that output.
+	ad9528outSourceSel_t
+	outSource[14]; //CHANNEL_DIV, PLL1_OUTPUT, SYSREF, INV_PLL1_OUTPUT
+	ad9528outBufferControl_t outBufferCtrl[14]; //LVDS, LVDS_BOOST, HSTL
+	uint8_t outAnalogDelay[14]; //5 bits
+	uint8_t outDigitalDelay[14]; //6 bits, 1/2 clock resolution @ channel div input frequency
+	uint8_t outChannelDiv[14]; //8 bit channel divider
+	uint32_t outFrequency_Hz[14]; //output clock frequency per clock output
+} ad9528outputSettings_t;
+
+///Enum to select the SYSREF output source
+typedef enum {
+	EXTERNAL = 0, EXT_RESAMPLED = 1, INTERNAL = 2
+} sysrefSourceSelection_t;
+
+///Enum to choose the SYSREF pattern mode.
+typedef enum {
+	NSHOT = 0, CONTINUOUS = 1, PRBS = 2, STOP = 3
+} sysrefPatternMode_t;
+
+///Enum to select the SYSREF input pin mode.
+typedef enum {
+	LEVEL_ACTIVE_HIGH = 0, LEVEL_ACTIVE_LOW = 1, RISING_EDGE = 2, FALLING_EDGE = 3
+} sysrefPinEdgeMode_t;
+
+///Enum to select the SYSREF output # of pulses for NSHOT mode.
+typedef enum {
+	ONE_PULSE = 0, TWO_PULSES = 2, FOUR_PULSES = 3, SIX_PULSES = 4, EIGHT_PULSES = 5
+} sysrefNshotMode_t;
+
+//Enum to select how a SYSREF is requested.
+typedef enum {
+	SPI = 0, PIN = 1
+} sysrefRequestMethod_t;
+
+/// Structure to hold AD9528 SYSREF output settings
+typedef struct {
+	sysrefRequestMethod_t sysrefRequestMethod;
+	sysrefSourceSelection_t sysrefSource;
+	sysrefPinEdgeMode_t sysrefPinEdgeMode;
+	ad9528RefBuffer_t sysrefPinBufferMode;
+	sysrefPatternMode_t sysrefPatternMode;
+	sysrefNshotMode_t sysrefNshotMode;
+	uint16_t sysrefDivide;
+
+} ad9528sysrefSettings_t;
+
+/// Structure to hold AD9528 SPI settings
+typedef struct {
+	uint8_t chipSelectIndex;		///< valid 1~8
+	uint8_t writeBitPolarity;		///< the level of the write bit of a SPI write instruction word, value is inverted for SPI read operation
+	uint8_t longInstructionWord;	///< 1 = 16bit instruction word, 0 = 8bit instruction word
+	uint8_t MSBFirst;				///< 1 = MSBFirst, 0 = LSBFirst
+	uint8_t CPHA;					///< clock phase, sets which clock edge the data updates (valid 0 or 1)
+	uint8_t CPOL;					///< clock polarity 0 = clock starts low, 1 = clock starts high
+	uint8_t enSpiStreaming;			///< Not implemented. SW feature to improve SPI throughput.
+	uint8_t autoIncAddrUp;			///< Not implemented. For SPI Streaming, set address increment direction. 1= next addr = addr+1, 0:addr = addr-1
+	uint8_t fourWireMode;			///< 1: Use 4-wire SPI, 0: 3-wire SPI (SDIO pin is bidirectional). NOTE: ADI's FPGA platform always uses 4-wire mode.
+	uint32_t spiClkFreq_Hz;			///< SPI Clk frequency in Hz (default 25000000), platform will use next lowest frequency that it's baud rate generator can create */
+} ad9528spiSettings_t;
+
+/// Structure to hold AD9528 settings
+typedef struct {
+	struct gpio_desc *gpio_resetb;
+	struct gpio_desc *gpio_sysref_req;
+	struct spi_desc *spi_desc;
+	ad9528spiSettings_t *spiSettings;
+	ad9528pll1Settings_t *pll1Settings;
+	ad9528pll2Settings_t *pll2Settings;
+	ad9528outputSettings_t *outputSettings;
+	ad9528sysrefSettings_t *sysrefSettings;
+} ad9528Device_t;
+
+typedef struct {
+	struct gpio_init_param *gpio_init_resetb;
+	struct gpio_init_param *gpio_init_sysref_req;
+	struct spi_init_param *spi_init;
+	ad9528spiSettings_t *spiSettings;
+	ad9528pll1Settings_t *pll1Settings;
+	ad9528pll2Settings_t *pll2Settings;
+	ad9528outputSettings_t *outputSettings;
+	ad9528sysrefSettings_t *sysrefSettings;
+} ad9528Init_t;
+
+typedef enum {
+	SYSREF_CONT_ON,
+	SYSREF_CONT_OFF,
+	SYSREF_PULSE,
+} ad9528SysrefReqMode_t;
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+
+//Helper function to setup the 9528 device data structure specifically for the ADI transceiver evaluation cards
+int32_t AD9528_initDeviceDataStruct(ad9528Device_t *device,
+					uint32_t vcxoFrequency_Hz, uint32_t refAFrequency_Hz,
+					uint32_t outputDeviceClock_Hz);
+int32_t AD9528_spiReadByte(ad9528Device_t *device, uint16_t addr,
+				uint8_t *readdata);
+
+//AD9528 API functions
+int32_t AD9528_hasTimeoutExpired();
+int32_t AD9528_resetDevice(ad9528Device_t *device);
+int32_t AD9528_init(ad9528Device_t **device, const ad9528Init_t *init_device);
+int32_t AD9528_config(ad9528Device_t
+			      *device); //writes all registers to desired values, leaves clock outputs off.
+int32_t AD9528_setupSYSREF(ad9528Device_t *device,
+			       uint16_t divideFromPll1Out,  sysrefPatternMode_t sysrefPatternMode,
+			       sysrefNshotMode_t nShotPulses);
+int32_t AD9528_requestSysref(ad9528Device_t *device, uint8_t enableSYSREF);
+int32_t AD9528_sysrefReq(ad9528Device_t *device,
+			     ad9528SysrefReqMode_t mode);
+int32_t AD9528_remove(ad9528Device_t *device);
+
+#endif
@@ -0,0 +1,927 @@
+/***************************************************************************//**
+ *   @file   hmc7044.c
+ *   @brief  Implementation of HMC7044, HMC7043 Driver.
+ *   @author DBogdan ([email protected])
+********************************************************************************
+ * Copyright 2018-2020(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdlib.h>
+#include <stdio.h>
+#include "hmc7044.h"
+#include "../../../include/error.h"
+#include "../../../include/util.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+#define HMC7044_WRITE		(0 << 15)
+#define HMC7044_READ		(1 << 15)
+#define HMC7044_CNT(x)		(((x) - 1) << 13)
+#define HMC7044_ADDR(x)		((x) & 0xFFF)
+
+/* Global Control */
+#define HMC7044_REG_SOFT_RESET		0x0000
+#define HMC7044_SOFT_RESET		BIT(0)
+
+#define HMC7044_REG_REQ_MODE_0		0x0001
+#define HMC7044_RESEED_REQ		BIT(7)
+#define HMC7044_HIGH_PERF_DISTRIB_PATH	BIT(6)
+#define HMC7044_HIGH_PERF_PLL_VCO	BIT(5)
+#define HMC7044_FORCE_HOLDOVER		BIT(4)
+#define HMC7044_MUTE_OUT_DIV		BIT(3)
+#define HMC7044_PULSE_GEN_REQ		BIT(2)
+#define HMC7044_RESTART_DIV_FSM		BIT(1)
+#define HMC7044_SLEEP_MODE		BIT(0)
+
+#define HMC7044_REG_REQ_MODE_1		0x0002
+#define HMC7044_PLL2_AUTOTUNE_TRIG	BIT(2)
+#define HMC7044_SLIP_REQ		BIT(1)
+
+#define HMC7044_REG_EN_CTRL_0		0x0003
+#define HMC7044_RF_RESEEDER_EN		BIT(5)
+#define HMC7044_VCO_SEL(x)		(((x) & 0x3) << 3)
+#define HMC7044_VCO_EXT			0
+#define HMC7044_VCO_HIGH		1
+#define HMC7044_VCO_LOW			2
+#define HMC7044_SYSREF_TIMER_EN		BIT(2)
+#define HMC7044_PLL2_EN			BIT(1)
+#define HMC7044_PLL1_EN			BIT(0)
+
+#define HMC7044_REG_EN_CTRL_1		0x0004
+#define HMC7044_SEVEN_PAIRS(x)		((x) & 0x7f)
+
+#define HMC7044_REG_GLOB_MODE		0x0005
+#define HMC7044_REF_PATH_EN(x)		((x) & 0xf)
+#define HMC7044_RFSYNC_EN		BIT(4)
+#define HMC7044_VCOIN_MODE_EN		BIT(5)
+#define HMC7044_SYNC_PIN_MODE(x)	(((x) & 0x3) << 6)
+
+/* PLL1 */
+#define HMC7044_REG_CLKIN0_BUF_CTRL	0x000A
+#define HMC7044_REG_CLKIN1_BUF_CTRL	0x000B
+#define HMC7044_REG_CLKIN2_BUF_CTRL	0x000C
+#define HMC7044_REG_CLKIN3_BUF_CTRL	0x000D
+#define HMC7044_REG_OSCIN_BUF_CTRL	0x000E
+
+#define HMC7044_REG_PLL1_REF_PRIO_CTRL	0x0014
+
+#define HMC7044_HIGH_Z_EN		BIT(4)
+#define HMC7044_LVPECL_EN		BIT(3)
+#define HMC7044_AC_COUPLING_EN		BIT(2)
+#define HMC7044_100_OHM_EN		BIT(1)
+#define HMC7044_BUF_EN			BIT(0)
+
+#define HMC7044_REG_CLKIN_PRESCALER(x)	(0x001C + (x))
+#define HMC7044_REG_OSCIN_PRESCALER	0x0020
+
+#define HMC7044_REG_PLL1_R_LSB		0x0021
+#define HMC7044_R1_LSB(x)		((x) & 0xff)
+
+#define HMC7044_REG_PLL1_R_MSB		0x0022
+#define HMC7044_R1_MSB(x)		(((x) & 0xff00) >> 8)
+
+#define HMC7044_REG_PLL1_N_LSB		0x0026
+#define HMC7044_N1_LSB(x)		((x) & 0xff)
+
+#define HMC7044_REG_PLL1_N_MSB		0x0027
+#define HMC7044_N1_MSB(x)		(((x) & 0xff00) >> 8)
+
+#define HMC7044_REG_PLL1_LOCK_DETECT	0x0028
+#define HMC7044_LOCK_DETECT_SLIP	BIT(5)
+#define HMC7044_LOCK_DETECT_TIMER(x)	((x) & 0x1f)
+
+/* PLL2 */
+#define HMC7044_REG_PLL2_FREQ_DOUBLER	0x0032
+#define HMC7044_PLL2_FREQ_DOUBLER_DIS	BIT(0)
+
+#define HMC7044_REG_PLL2_R_LSB		0x0033
+#define HMC7044_R2_LSB(x)		((x) & 0xff)
+
+#define HMC7044_REG_PLL2_R_MSB		0x0034
+#define HMC7044_R2_MSB(x)		(((x) & 0xf00) >> 8)
+
+#define HMC7044_REG_PLL2_N_LSB		0x0035
+#define HMC7044_N2_LSB(x)		((x) & 0xff)
+
+#define HMC7044_REG_PLL2_N_MSB		0x0036
+#define HMC7044_N2_MSB(x)		(((x) & 0xff00) >> 8)
+
+#define HMC7044_REG_OSCOUT_PATH		0x0039
+#define HMC7044_REG_OSCOUT_DRIVER_0	0x003A
+#define HMC7044_REG_OSCOUT_DRIVER_1	0x003B
+
+/* GPIO/SDATA Control */
+#define HMC7044_REG_GPI_CTRL(x)		(0x0046 + (x))
+#define HMC7044_REG_GPI_SEL(x)		((x) & 0xf)
+
+#define HMC7044_REG_GPO_CTRL(x)		(0x0050 + (x))
+#define HMC7044_GPO_SEL(x)		(((x) & 0x3f) << 2)
+#define HMC7044_GPO_MODE		BIT(1)
+#define HMC7044_GPO_EN			BIT(0)
+
+/* SYSREF/SYNC Control */
+#define HMC7044_REG_PULSE_GEN		0x005A
+#define HMC7044_PULSE_GEN_MODE(x)	((x) & 0x7)
+
+#define HMC7044_REG_SYNC		0x005B
+#define HMC7044_SYNC_RETIME		BIT(2)
+#define HMC7044_SYNC_THROUGH_PLL2	BIT(1)
+#define HMC7044_SYNC_POLARITY		BIT(0)
+
+#define HMC7044_REG_SYSREF_TIMER_LSB	0x005C
+#define HMC7044_SYSREF_TIMER_LSB(x)	((x) & 0xff)
+
+#define HMC7044_REG_SYSREF_TIMER_MSB	0x005D
+#define HMC7044_SYSREF_TIMER_MSB(x)	(((x) & 0xf00) >> 8)
+
+#define HMC7044_CLK_INPUT_CTRL		0x0064
+#define HMC7044_LOW_FREQ_INPUT_MODE	BIT(0)
+#define HMC7044_DIV_2_INPUT_MODE	BIT(1)
+
+/* Status and Alarm readback */
+#define HMC7044_REG_ALARM_READBACK	0x007D
+#define HMC7044_REG_PLL1_STATUS		0x0082
+
+#define HMC7044_PLL1_FSM_STATE(x)	((x) & 0x7)
+#define HMC7044_PLL1_ACTIVE_CLKIN(x)	(((x) >> 3) & 0x3)
+
+#define HMC7044_PLL2_LOCK_DETECT(x)	((x) & 0x1)
+#define HMC7044_SYSREF_SYNC_STAT(x)	((x) & 0x2)
+#define HMC7044_CLK_OUT_PH_STATUS(x)	((x) & 0x4)
+#define HMC7044_PLL1_PLL2_LOCK_STAT(x)	((x) & 0x8)
+#define HMC7044_SYNC_REQ_STATUS(x)	((x) & 0x10)
+
+/* Other Controls */
+#define HMC7044_REG_CLK_OUT_DRV_LOW_PW	0x009F
+#define HMC7044_REG_CLK_OUT_DRV_HIGH_PW	0x00A0
+#define HMC7044_REG_PLL1_DELAY		0x00A5
+#define HMC7044_REG_PLL1_HOLDOVER	0x00A8
+#define HMC7044_REG_VTUNE_PRESET	0x00B0
+
+/* Clock Distribution */
+#define HMC7044_REG_CH_OUT_CRTL_0(ch)	(0x00C8 + 0xA * (ch))
+#define HMC7044_HI_PERF_MODE		BIT(7)
+#define HMC7044_SYNC_EN			BIT(6)
+#define HMC7044_CH_EN			BIT(0)
+#define HMC7044_START_UP_MODE_DYN_EN	(BIT(3) | BIT(2))
+
+#define HMC7044_REG_CH_OUT_CRTL_1(ch)	(0x00C9 + 0xA * (ch))
+#define HMC7044_DIV_LSB(x)		((x) & 0xFF)
+
+#define HMC7044_REG_CH_OUT_CRTL_2(ch)	(0x00CA + 0xA * (ch))
+#define HMC7044_DIV_MSB(x)		(((x) >> 8) & 0xFF)
+
+#define HMC7044_REG_CH_OUT_CRTL_3(ch)	(0x00CB + 0xA * (ch))
+#define HMC7044_REG_CH_OUT_CRTL_4(ch)	(0x00CC + 0xA * (ch))
+#define HMC7044_REG_CH_OUT_CRTL_5(ch)	(0x00CD + 0xA * (ch))
+#define HMC7044_REG_CH_OUT_CRTL_6(ch)	(0x00CE + 0xA * (ch))
+#define HMC7044_REG_CH_OUT_CRTL_7(ch)	(0x00CF + 0xA * (ch))
+
+#define HMC7044_REG_CH_OUT_CRTL_8(ch)	(0x00D0 + 0xA * (ch))
+#define HMC7044_DRIVER_MODE(x)		(((x) & 0x3) << 3)
+#define HMC7044_DRIVER_Z_MODE(x)	(((x) & 0x3) << 0)
+#define HMC7044_DYN_DRIVER_EN		BIT(5)
+#define HMC7044_FORCE_MUTE_EN		BIT(7)
+
+#define HMC7044_NUM_CHAN	14
+
+#define HMC7044_LOW_VCO_MIN	2150000
+#define HMC7044_LOW_VCO_MAX	2880000
+#define HMC7044_HIGH_VCO_MIN	2650000
+#define HMC7044_HIGH_VCO_MAX	3200000
+
+#define HMC7044_RECOMM_LCM_MIN	30000
+#define HMC7044_RECOMM_LCM_MAX	70000
+#define HMC7044_RECOMM_FPD1	10000
+
+#define HMC7044_R1_MAX		65535
+#define HMC7044_N1_MAX		65535
+
+#define HMC7044_R2_MIN		1
+#define HMC7044_R2_MAX		4095
+#define HMC7044_N2_MIN		8
+#define HMC7044_N2_MAX		65535
+
+#define HMC7044_OUT_DIV_MIN	1
+#define HMC7044_OUT_DIV_MAX	4094
+
+/******************************************************************************/
+/************************** Functions Implementation **************************/
+/******************************************************************************/
+
+/**
+ * SPI register write to device.
+ * @param dev - The device structure.
+ * @param reg - The register address.
+ * @param val - The register data.
+ * @return SUCCESS in case of success, negative error code otherwise.
+ */
+int32_t hmc7044_write(struct hmc7044_dev *dev,
+			 uint16_t reg,
+			 uint8_t val)
+{
+	uint8_t buf[3];
+	uint16_t cmd;
+
+	cmd = HMC7044_WRITE | HMC7044_CNT(1) | HMC7044_ADDR(reg);
+	buf[0] = cmd >> 8;
+	buf[1] = cmd & 0xFF;
+	buf[2] = val;
+	return spi_write_and_read_3wire(dev->spi_desc, buf, NULL,
+							ARRAY_SIZE(buf), 0);
+}
+
+/**
+ * SPI register read from device.
+ * @param dev - The device structure.
+ * @param reg - The register address.
+ * @param val - The register data.
+ * @return SUCCESS in case of success, negative error code otherwise.
+ */
+
+int32_t hmc7044_read(struct hmc7044_dev *dev, uint16_t reg, uint8_t *val)
+{
+	uint8_t wr_buf[2];
+	uint8_t rd_data[1];
+	uint16_t cmd;
+	int ret;
+
+	cmd = HMC7044_READ | HMC7044_CNT(1) | HMC7044_ADDR(reg);
+	wr_buf[0] = cmd >> 8;
+	wr_buf[1] = cmd & 0xFF;
+
+	ret = spi_write_and_read_3wire(dev->spi_desc, wr_buf, rd_data,
+			ARRAY_SIZE(wr_buf), ARRAY_SIZE(rd_data));
+	if (ret != SUCCESS)
+		return ret;
+
+	*val = rd_data[0];
+
+	return SUCCESS;
+}
+
+/**
+ * Calculate the output channel divider.
+ * @param rate - The desired rate.
+ * @param parent_rate - The parent rate.
+ * @return The output divider.
+ */
+uint32_t hmc7044_calc_out_div(uint32_t rate,
+			      uint32_t parent_rate)
+{
+	uint32_t div;
+
+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
+
+	/* Supported odd divide ratios are 1, 3, and 5 */
+	if ((div != 1) && (div != 3) && (div != 5) && (div % 2))
+		div = DIV_ROUND_CLOSEST(parent_rate, rate * 2) * 2;
+
+	div = clamp_t(unsigned int,
+		      div,
+		      HMC7044_OUT_DIV_MIN,
+		      HMC7044_OUT_DIV_MAX);
+
+	return div;
+}
+
+/**
+ * Recalculate rate corresponding to a channel.
+ * @param dev - The device structure.
+ * @param chan_num - Channel number.
+ * @param rate - Channel rate.
+ * @return SUCCESS in case of success, negative error code otherwise.
+ */
+int32_t hmc7044_clk_recalc_rate(struct hmc7044_dev *dev, uint32_t chan_num,
+				uint64_t *rate)
+{
+	int i;
+	struct hmc7044_chan_spec *chan = NULL;
+
+	/* Find the reqested channel number */
+	for (i = 0; i < dev->num_channels; i++) {
+		if (dev->channels[i].num == chan_num) {
+			chan = &dev->channels[i];
+			break;
+		}
+	}
+	if (chan == NULL )
+		return FAILURE;
+
+	*rate = dev->pll2_freq / chan->divider;
+
+	return SUCCESS;
+}
+
+/**
+ * Calculate closest possible rate
+ * @param dev - The device structure
+ * @param rate - The desired rate.
+ * @param rounded_rate - The closest possible rate of desired rate.
+ * @return SUCCESS in case of success, negative error code otherwise.
+ */
+int32_t hmc7044_clk_round_rate(struct hmc7044_dev *dev, uint32_t rate,
+			       uint64_t *rounded_rate)
+{
+	uint32_t div = hmc7044_calc_out_div(rate, dev->pll2_freq);
+
+	*rounded_rate = DIV_ROUND_CLOSEST(dev->pll2_freq, div);
+
+	return SUCCESS;
+}
+
+/**
+ * Set channel rate.
+ * @param dev - The device structure.
+ * @param chan_num - Channel number.
+ * @param rate - Channel rate.
+ * @return SUCCESS in case of success, negative error code otherwise.
+ */
+int32_t hmc7044_clk_set_rate(struct hmc7044_dev *dev, uint32_t chan_num,
+			     uint64_t rate)
+{
+	uint32_t div;
+	int32_t ret;
+	int i;
+	struct hmc7044_chan_spec *chan = NULL;
+
+	/* Find the reqested channel number */
+	for (i = 0; i < dev->num_channels; i++) {
+		if (dev->channels[i].num == chan_num) {
+			chan = &dev->channels[i];
+			break;
+		}
+	}
+	if (chan == NULL )
+		return FAILURE;
+
+	div = hmc7044_calc_out_div(rate, dev->pll2_freq);
+	chan->divider = div;
+
+	ret = hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_1(chan->num),
+			    HMC7044_DIV_LSB(div));
+	if(ret < 0)
+		return ret;
+
+	return hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_2(chan->num),
+			     HMC7044_DIV_MSB(div));
+}
+
+/**
+ * Setup the device.
+ * @param dev - The device structure.
+ * @return SUCCESS in case of success, negative error code otherwise.
+ */
+static int32_t hmc7044_setup(struct hmc7044_dev *dev)
+{
+	struct hmc7044_chan_spec *chan;
+	bool high_vco_en;
+	bool pll2_freq_doubler_en;
+	uint32_t vcxo_freq, pll2_freq;
+	uint32_t clkin_freq[4];
+	uint32_t lcm_freq;
+	uint32_t in_prescaler[5];
+	uint32_t pll1_lock_detect;
+	uint32_t n1, r1;
+	uint32_t pfd1_freq;
+	uint32_t vco_limit;
+	uint32_t n2[2], r2[2];
+	uint32_t i, ref_en = 0;
+
+	vcxo_freq = dev->vcxo_freq / 1000;
+	pll2_freq = dev->pll2_freq / 1000;
+
+	lcm_freq = vcxo_freq;
+	for (i = 0; i < ARRAY_SIZE(clkin_freq); i++) {
+		if (dev->clkin_freq_ccf[i])
+			clkin_freq[i] = dev->clkin_freq_ccf[i] / 1000;
+		else
+			clkin_freq[i] = dev->clkin_freq[i] / 1000;
+
+		if (clkin_freq[i]) {
+			lcm_freq = greatest_common_divisor(clkin_freq[i], lcm_freq);
+			ref_en |= BIT(i);
+		}
+	}
+
+	while (lcm_freq > HMC7044_RECOMM_LCM_MAX)
+		lcm_freq /= 2;
+
+	for (i = 0; i < ARRAY_SIZE(clkin_freq); i++) {
+		if (clkin_freq[i])
+			in_prescaler[i] = clkin_freq[i] / lcm_freq;
+		else
+			in_prescaler[i] = 1;
+	}
+	in_prescaler[4] = vcxo_freq / lcm_freq;
+
+	pll1_lock_detect = log_base_2((lcm_freq * 4000) / dev->pll1_loop_bw);
+
+	/* fVCXO / N1 = fLCM / R1 */
+	rational_best_approximation(vcxo_freq, lcm_freq,
+				    HMC7044_N1_MAX, HMC7044_R1_MAX,
+				    &n1, &r1);
+
+	pfd1_freq = vcxo_freq / n1;
+	while ((pfd1_freq > HMC7044_RECOMM_FPD1) &&
+	       (n1 <= HMC7044_N1_MAX / 2) &&
+	       (r1 <= HMC7044_R1_MAX / 2)) {
+		pfd1_freq /= 2;
+		n1 *= 2;
+		r1 *= 2;
+	}
+
+	dev->pll1_pfd = pfd1_freq;
+
+	if (pll2_freq < HMC7044_LOW_VCO_MIN  ||
+	    pll2_freq > HMC7044_HIGH_VCO_MAX)
+		return FAILURE;
+
+	vco_limit = (HMC7044_LOW_VCO_MAX + HMC7044_HIGH_VCO_MIN) / 2;
+	if (pll2_freq >= vco_limit)
+		high_vco_en = true;
+	else
+		high_vco_en = false;
+
+	/* fVCO / N2 = fVCXO * doubler / R2 */
+	pll2_freq_doubler_en = true;
+	rational_best_approximation(pll2_freq, vcxo_freq * 2,
+				    HMC7044_N2_MAX, HMC7044_R2_MAX,
+				    &n2[0], &r2[0]);
+
+	if (pll2_freq != vcxo_freq * n2[0] / r2[0]) {
+		rational_best_approximation(pll2_freq, vcxo_freq,
+					    HMC7044_N2_MAX, HMC7044_R2_MAX,
+					    &n2[1], &r2[1]);
+
+		if (abs((int)pll2_freq - (int)(vcxo_freq * 2 * n2[0] / r2[0])) >
+		    abs((int)pll2_freq - (int)(vcxo_freq * n2[1] / r2[1]))) {
+			n2[0] = n2[1];
+			r2[0] = r2[1];
+			pll2_freq_doubler_en = false;
+		}
+	}
+
+	while ((n2[0] < HMC7044_N2_MIN) && (r2[0] <= HMC7044_R2_MAX / 2)) {
+		n2[0] *= 2;
+		r2[0] *= 2;
+	}
+	if (n2[0] < HMC7044_N2_MIN)
+		return -FAILURE;
+
+	/* Resets all registers to default values */
+	hmc7044_write(dev, HMC7044_REG_SOFT_RESET, HMC7044_SOFT_RESET);
+	mdelay(10);
+	hmc7044_write(dev, HMC7044_REG_SOFT_RESET, 0);
+	mdelay(10);
+
+	/* Disable all channels */
+	for (i = 0; i < HMC7044_NUM_CHAN; i++)
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_0(i), 0);
+
+	/* Load the configuration updates (provided by Analog Devices) */
+	hmc7044_write(dev, HMC7044_REG_CLK_OUT_DRV_LOW_PW, 0x4d);
+	hmc7044_write(dev, HMC7044_REG_CLK_OUT_DRV_HIGH_PW, 0xdf);
+	hmc7044_write(dev, HMC7044_REG_PLL1_DELAY, 0x06);
+	hmc7044_write(dev, HMC7044_REG_PLL1_HOLDOVER, 0x06);
+	hmc7044_write(dev, HMC7044_REG_VTUNE_PRESET, 0x04);
+
+	uint8_t rd_back;
+	hmc7044_read(dev, HMC7044_REG_CLK_OUT_DRV_LOW_PW, &rd_back);
+	hmc7044_read(dev, HMC7044_REG_CLK_OUT_DRV_HIGH_PW, &rd_back);
+	hmc7044_read(dev, HMC7044_REG_PLL1_DELAY, &rd_back);
+	hmc7044_read(dev, HMC7044_REG_PLL1_HOLDOVER, &rd_back);
+	hmc7044_read(dev, HMC7044_REG_VTUNE_PRESET, &rd_back);
+
+	hmc7044_write(dev, HMC7044_REG_GLOB_MODE,
+		      HMC7044_SYNC_PIN_MODE(dev->sync_pin_mode) |
+		      (dev->clkin0_rfsync_en ? HMC7044_RFSYNC_EN : 0) |
+		      (dev->clkin1_vcoin_en ? HMC7044_VCOIN_MODE_EN : 0) |
+		      HMC7044_REF_PATH_EN(ref_en));
+
+	/* Program PLL2 */
+
+	/* Select the VCO range */
+	hmc7044_write(dev, HMC7044_REG_EN_CTRL_0,
+		      (dev->rf_reseeder_en ? HMC7044_RF_RESEEDER_EN : 0) |
+		      HMC7044_VCO_SEL(high_vco_en ?
+				      HMC7044_VCO_HIGH :
+				      HMC7044_VCO_LOW) |
+		      HMC7044_SYSREF_TIMER_EN | HMC7044_PLL2_EN |
+		      HMC7044_PLL1_EN);
+
+	/* Program the dividers */
+	hmc7044_write(dev, HMC7044_REG_PLL2_R_LSB,
+		      HMC7044_R2_LSB(r2[0]));
+	hmc7044_write(dev, HMC7044_REG_PLL2_R_MSB,
+		      HMC7044_R2_MSB(r2[0]));
+	hmc7044_write(dev, HMC7044_REG_PLL2_N_LSB,
+		      HMC7044_N2_LSB(n2[0]));
+	hmc7044_write(dev, HMC7044_REG_PLL2_N_MSB,
+		      HMC7044_N2_MSB(n2[0]));
+
+	/* Program the reference doubler */
+	hmc7044_write(dev, HMC7044_REG_PLL2_FREQ_DOUBLER,
+		      pll2_freq_doubler_en ? 0 : HMC7044_PLL2_FREQ_DOUBLER_DIS);
+
+	/* Program PLL1 */
+
+	/* Set the lock detect timer threshold */
+	hmc7044_write(dev, HMC7044_REG_PLL1_LOCK_DETECT,
+		      HMC7044_LOCK_DETECT_TIMER(pll1_lock_detect));
+
+	/* Set the LCM */
+	for (i = 0; i < ARRAY_SIZE(clkin_freq); i++) {
+		hmc7044_write(dev, HMC7044_REG_CLKIN_PRESCALER(i),
+			      in_prescaler[i]);
+	}
+	hmc7044_write(dev, HMC7044_REG_OSCIN_PRESCALER,
+		      in_prescaler[4]);
+
+	/* Program the dividers */
+	hmc7044_write(dev, HMC7044_REG_PLL1_R_LSB,
+		      HMC7044_R2_LSB(r1));
+	hmc7044_write(dev, HMC7044_REG_PLL1_R_MSB,
+		      HMC7044_R2_MSB(r1));
+	hmc7044_write(dev, HMC7044_REG_PLL1_N_LSB,
+		      HMC7044_N2_LSB(n1));
+	hmc7044_write(dev, HMC7044_REG_PLL1_N_MSB,
+		      HMC7044_N2_MSB(n1));
+
+	hmc7044_write(dev, HMC7044_REG_PLL1_REF_PRIO_CTRL,
+		      dev->pll1_ref_prio_ctrl);
+
+	/* Program the SYSREF timer */
+
+	/* Set the divide ratio */
+	hmc7044_write(dev, HMC7044_REG_SYSREF_TIMER_LSB,
+		      HMC7044_SYSREF_TIMER_LSB(dev->sysref_timer_div));
+	hmc7044_write(dev, HMC7044_REG_SYSREF_TIMER_MSB,
+		      HMC7044_SYSREF_TIMER_MSB(dev->sysref_timer_div));
+
+	/* Set the pulse generator mode configuration */
+	hmc7044_write(dev, HMC7044_REG_PULSE_GEN,
+		      HMC7044_PULSE_GEN_MODE(dev->pulse_gen_mode));
+
+	/* Enable the input buffers */
+	hmc7044_write(dev, HMC7044_REG_CLKIN0_BUF_CTRL,
+		      dev->in_buf_mode[0]);
+	hmc7044_write(dev, HMC7044_REG_CLKIN1_BUF_CTRL,
+		      dev->in_buf_mode[1]);
+	hmc7044_write(dev, HMC7044_REG_CLKIN2_BUF_CTRL,
+		      dev->in_buf_mode[2]);
+	hmc7044_write(dev, HMC7044_REG_CLKIN3_BUF_CTRL,
+		      dev->in_buf_mode[3]);
+	hmc7044_write(dev, HMC7044_REG_OSCIN_BUF_CTRL,
+		      dev->in_buf_mode[4]);
+
+	/* Set GPIOs */
+	for (i = 0; i < ARRAY_SIZE(dev->gpi_ctrl); i++) {
+		hmc7044_write(dev, HMC7044_REG_GPI_CTRL(i),
+			      dev->gpi_ctrl[i]);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(dev->gpo_ctrl); i++) {
+		hmc7044_write(dev, HMC7044_REG_GPO_CTRL(i),
+			      dev->gpo_ctrl[i]);
+	}
+
+	mdelay(10);
+
+	/* Program the output channels */
+	for (i = 0; i < dev->num_channels; i++) {
+		chan = &dev->channels[i];
+		if (chan->num >= HMC7044_NUM_CHAN || chan->disable)
+			continue;
+
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_1(chan->num),
+			      HMC7044_DIV_LSB(chan->divider));
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_2(chan->num),
+			      HMC7044_DIV_MSB(chan->divider));
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_8(chan->num),
+			      HMC7044_DRIVER_MODE(chan->driver_mode) |
+			      HMC7044_DRIVER_Z_MODE(chan->driver_impedance) |
+			      (chan->dynamic_driver_enable ?
+			       HMC7044_DYN_DRIVER_EN : 0) |
+			      (chan->force_mute_enable ?
+			       HMC7044_FORCE_MUTE_EN : 0));
+
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_3(chan->num),
+			      chan->fine_delay & 0x1F);
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_4(chan->num),
+			      chan->coarse_delay & 0x1F);
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_7(chan->num),
+			      chan->out_mux_mode & 0x3);
+
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_0(chan->num),
+			      (chan->start_up_mode_dynamic_enable ?
+			       HMC7044_START_UP_MODE_DYN_EN : 0) |
+			      (chan->output_control0_rb4_enable ? BIT(4) : 0) |
+			      (chan->high_performance_mode_dis ?
+			       0 : HMC7044_HI_PERF_MODE) | HMC7044_SYNC_EN |
+			      HMC7044_CH_EN);
+	}
+	mdelay(10);
+
+	/* Do a restart to reset the system and initiate calibration */
+	hmc7044_write(dev, HMC7044_REG_REQ_MODE_0,
+		      HMC7044_RESTART_DIV_FSM);
+	mdelay(1);
+	hmc7044_write(dev, HMC7044_REG_REQ_MODE_0,
+		      (dev->high_performance_mode_clock_dist_en ?
+		       HMC7044_HIGH_PERF_DISTRIB_PATH : 0));
+	mdelay(1);
+
+	return SUCCESS;
+}
+
+/**
+ * Setup the device.
+ * @param dev - The device structure.
+ * @return SUCCESS in case of success, negative error code otherwise.
+ */
+static int32_t hmc7043_setup(struct hmc7044_dev *dev)
+{
+	struct hmc7044_chan_spec *chan;
+	uint32_t i;
+
+	if (dev->clkin_freq_ccf[0])
+		dev->pll2_freq = dev->clkin_freq_ccf[0];
+	else
+		dev->pll2_freq  = dev->clkin_freq[0];
+
+	if (!dev->pll2_freq) {
+		printf("%s: Failed to get valid parent rate\n", __func__);
+		return FAILURE;
+	}
+
+	/* Resets all registers to default values */
+	hmc7044_write(dev, HMC7044_REG_SOFT_RESET, HMC7044_SOFT_RESET);
+	mdelay(10);
+	hmc7044_write(dev, HMC7044_REG_SOFT_RESET, 0);
+	mdelay(10);
+
+	/* Load the configuration updates (provided by Analog Devices) */
+	hmc7044_write(dev, HMC7044_REG_CLK_OUT_DRV_LOW_PW, 0x4d);
+	hmc7044_write(dev, HMC7044_REG_CLK_OUT_DRV_HIGH_PW, 0xdf);
+
+	/* Disable all channels */
+	for (i = 0; i < HMC7044_NUM_CHAN; i++)
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_0(i), 0);
+
+	if (dev->pll2_freq < 1000000000U)
+		hmc7044_write(dev, HMC7044_CLK_INPUT_CTRL,
+			      HMC7044_LOW_FREQ_INPUT_MODE);
+
+	hmc7044_write(dev, HMC7044_REG_EN_CTRL_0,
+		      (dev->rf_reseeder_en ? HMC7044_RF_RESEEDER_EN : 0) |
+		      HMC7044_SYSREF_TIMER_EN);
+
+	/* Program the SYSREF timer */
+
+	/* Set the divide ratio */
+	hmc7044_write(dev, HMC7044_REG_SYSREF_TIMER_LSB,
+		      HMC7044_SYSREF_TIMER_LSB(dev->sysref_timer_div));
+	hmc7044_write(dev, HMC7044_REG_SYSREF_TIMER_MSB,
+		      HMC7044_SYSREF_TIMER_MSB(dev->sysref_timer_div));
+
+	/* Set the pulse generator mode configuration */
+	hmc7044_write(dev, HMC7044_REG_PULSE_GEN,
+		      HMC7044_PULSE_GEN_MODE(dev->pulse_gen_mode));
+
+	/* Enable the input buffers */
+	hmc7044_write(dev, HMC7044_REG_CLKIN0_BUF_CTRL,
+		      dev->in_buf_mode[0]);
+	hmc7044_write(dev, HMC7044_REG_CLKIN1_BUF_CTRL,
+		      dev->in_buf_mode[1]);
+
+	/* Set GPIOs */
+	hmc7044_write(dev, HMC7044_REG_GPI_CTRL(0),
+		      dev->gpi_ctrl[0]);
+
+	hmc7044_write(dev, HMC7044_REG_GPO_CTRL(0),
+		      dev->gpo_ctrl[0]);
+
+	/* Program the output channels */
+	for (i = 0; i < dev->num_channels; i++) {
+		chan = &dev->channels[i];
+
+		if (chan->num >= HMC7044_NUM_CHAN || chan->disable)
+			continue;
+
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_1(chan->num),
+			      HMC7044_DIV_LSB(chan->divider));
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_2(chan->num),
+			      HMC7044_DIV_MSB(chan->divider));
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_8(chan->num),
+			      HMC7044_DRIVER_MODE(chan->driver_mode) |
+			      HMC7044_DRIVER_Z_MODE(chan->driver_impedance) |
+			      (chan->dynamic_driver_enable ?
+			       HMC7044_DYN_DRIVER_EN : 0) |
+			      (chan->force_mute_enable ?
+			       HMC7044_FORCE_MUTE_EN : 0));
+
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_3(chan->num),
+			      chan->fine_delay & 0x1F);
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_4(chan->num),
+			      chan->coarse_delay & 0x1F);
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_7(chan->num),
+			      chan->out_mux_mode & 0x3);
+
+		hmc7044_write(dev, HMC7044_REG_CH_OUT_CRTL_0(chan->num),
+			      (chan->start_up_mode_dynamic_enable ?
+			       HMC7044_START_UP_MODE_DYN_EN : 0) |
+			      (chan->output_control0_rb4_enable ? BIT(4) : 0) |
+			      (chan->high_performance_mode_dis ?
+			       0 : HMC7044_HI_PERF_MODE) | HMC7044_SYNC_EN |
+			      HMC7044_CH_EN);
+	}
+	mdelay(10);
+
+
+	/* Do a restart to reset the system and initiate calibration */
+	hmc7044_write(dev, HMC7044_REG_REQ_MODE_0,
+		      HMC7044_RESTART_DIV_FSM);
+	mdelay(1);
+	hmc7044_write(dev, HMC7044_REG_REQ_MODE_0,
+		      (dev->high_performance_mode_clock_dist_en ?
+		       HMC7044_HIGH_PERF_DISTRIB_PATH : 0));
+	mdelay(1);
+
+	return SUCCESS;
+}
+
+/***************************************************************************//**
+ * @brief hmc7044_reg_init
+ *******************************************************************************/
+int32_t hmc7044_reg_init(struct hmc7044_dev **device,
+		     const struct hmc7044_init_param *init_param)
+{
+	int ret = SUCCESS;
+	struct hmc7044_dev *dev;
+
+	dev = (struct hmc7044_dev *)malloc(sizeof(*dev));
+	if (!dev)
+		return FAILURE;
+
+	/* SPI */
+	ret = spi_init(&dev->spi_desc, init_param->spi_init);
+
+	*device = dev;
+
+	return ret;
+}
+
+/**
+ * Initialize the device.
+ * @param device - The device structure.
+ * @param init_param - The structure that contains the device initial
+ * 		       parameters.
+ * @return SUCCESS in case of success, negative error code otherwise.
+ */
+int32_t hmc7044_init(struct hmc7044_dev **device,
+		     const struct hmc7044_init_param *init_param)
+{
+	struct hmc7044_dev *dev;
+	int32_t ret;
+	unsigned int i;
+
+	dev = (struct hmc7044_dev *)malloc(sizeof(*dev));
+	if (!dev)
+		return FAILURE;
+
+	ret = spi_init(&dev->spi_desc, init_param->spi_init);
+	if (ret < 0)
+		return ret;
+
+	dev->is_hmc7043 = init_param->is_hmc7043;
+
+	dev->clkin_freq[0] = init_param->clkin_freq[0];
+	dev->clkin_freq[1] = init_param->clkin_freq[1];
+	dev->clkin_freq[2] = init_param->clkin_freq[2];
+	dev->clkin_freq[3] = init_param->clkin_freq[3];
+
+	dev->clkin_freq_ccf[0] = init_param->clkin_freq_ccf[0];
+	dev->clkin_freq_ccf[1] = init_param->clkin_freq_ccf[1];
+	dev->clkin_freq_ccf[2] = init_param->clkin_freq_ccf[2];
+	dev->clkin_freq_ccf[3] = init_param->clkin_freq_ccf[3];
+
+	dev->vcxo_freq = init_param->vcxo_freq;
+	dev->pll1_pfd = init_param->pll1_pfd;
+	dev->pll2_freq = init_param->pll2_freq;
+	dev->pll1_loop_bw = init_param->pll1_loop_bw;
+
+	dev->sysref_timer_div = init_param->sysref_timer_div;
+	dev->pll1_ref_prio_ctrl = init_param->pll1_ref_prio_ctrl;
+	dev->clkin0_rfsync_en = init_param->clkin0_rfsync_en;
+	dev->clkin1_vcoin_en = init_param->clkin1_vcoin_en;
+	dev->high_performance_mode_clock_dist_en =
+		init_param->high_performance_mode_clock_dist_en;
+	dev->rf_reseeder_en = !init_param->rf_reseeder_disable;
+	dev->sync_pin_mode = init_param->sync_pin_mode;
+	dev->pulse_gen_mode = init_param->pulse_gen_mode;
+
+	dev->in_buf_mode[0] = init_param->in_buf_mode[0];
+	dev->in_buf_mode[1] = init_param->in_buf_mode[1];
+	dev->in_buf_mode[2] = init_param->in_buf_mode[2];
+	dev->in_buf_mode[3] = init_param->in_buf_mode[3];
+	dev->in_buf_mode[4] = init_param->in_buf_mode[4];
+
+	dev->gpi_ctrl[0] = init_param->gpi_ctrl[0];
+	dev->gpi_ctrl[1] = init_param->gpi_ctrl[1];
+	dev->gpi_ctrl[2] = init_param->gpi_ctrl[2];
+	dev->gpi_ctrl[3] = init_param->gpi_ctrl[3];
+
+	dev->gpo_ctrl[0] = init_param->gpo_ctrl[0];
+	dev->gpo_ctrl[1] = init_param->gpo_ctrl[1];
+	dev->gpo_ctrl[2] = init_param->gpo_ctrl[2];
+	dev->gpo_ctrl[3] = init_param->gpo_ctrl[3];
+
+	dev->num_channels = init_param->num_channels;
+	dev->channels = (struct hmc7044_chan_spec *)
+			malloc(sizeof(*dev->channels) * dev->num_channels);
+
+	for (i = 0; i < dev->num_channels; i++) {
+		dev->channels[i].num = init_param->channels[i].num;
+		dev->channels[i].disable = init_param->channels[i].disable;
+		dev->channels[i].divider = init_param->channels[i].divider;
+		dev->channels[i].driver_mode =
+			init_param->channels[i].driver_mode;
+		dev->channels[i].high_performance_mode_dis =
+			init_param->channels[i].high_performance_mode_dis;
+		dev->channels[i].start_up_mode_dynamic_enable =
+			init_param->channels[i].start_up_mode_dynamic_enable;
+		dev->channels[i].dynamic_driver_enable =
+			init_param->channels[i].dynamic_driver_enable;
+		dev->channels[i].output_control0_rb4_enable =
+			init_param->channels[i].output_control0_rb4_enable;
+		dev->channels[i].force_mute_enable =
+			init_param->channels[i].force_mute_enable;
+		dev->channels[i].driver_impedance =
+			init_param->channels[i].driver_impedance;
+		dev->channels[i].coarse_delay =
+			init_param->channels[i].coarse_delay;
+		dev->channels[i].fine_delay =
+			init_param->channels[i].fine_delay;
+		dev->channels[i].out_mux_mode =
+			init_param->channels[i].out_mux_mode;
+	}
+
+	*device = dev;
+
+	if (!dev->is_hmc7043)
+		return hmc7044_setup(dev);
+	else
+		return hmc7043_setup(dev);
+}
+
+/**
+ * Remove the device - release resources.
+ * @param device - The device structure.
+ * @return SUCCESS in case of success, negative error code otherwise.
+ */
+int32_t hmc7044_remove(struct hmc7044_dev *device)
+{
+	int32_t ret;
+
+	ret = spi_remove(device->spi_desc);
+	free(device->channels);
+	free(device);
+
+	return ret;
+}
@@ -0,0 +1,276 @@
+/***************************************************************************//**
+ *   @file   hmc7044.h
+ *   @brief  Header file of HMC7044, HMC7043 Driver.
+ *   @author DBogdan ([email protected])
+********************************************************************************
+ * Copyright 2018-2020(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+#ifndef HMC7044_H_
+#define HMC7044_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdbool.h>
+#include <stdint.h>
+#include "delay.h"
+#include "spi.h"
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+// Enum to select SYNC pin configuration with respect to PLL2 (0x0005)
+typedef enum
+{
+    SYNC_DISABLED = 0,
+	SYNC_MULTICHIP = 1,
+	SYNC_PULSE_GEN = 2,
+	SYNC_ALARM = 3
+} hmc7044SyncPinModeSelect_t;
+
+// Enum to select input buffer mode (0x000A, 0x000B, 0x000C, 0x000D, 0x000E)
+typedef enum
+{
+	BUFFER_ENABLE 			= (1) << 0,
+	BUFFER_DISABLE			= (0) << 0,
+    ENABLE_INTERNAL_TERM 	= (1) << 1,
+	ENABLE_AC_COUPLE 		= (1) << 2,
+	ENABLE_LVPECL 			= (1) << 3,
+	ENABLE_HIGH_Z 			= (1) << 4
+} hmc7044InputBufferMode_t;
+
+// Enum to select output driver mode (0x003A, 0x003B, 0x00D0, 0x00DA, 0x00E4,
+// 0x00EE, 0x00F8, 0x0102, 0x010C, 0x0116, 0x0120, 0x012A, 0x0134, 0x013E,
+// 0x0148, 0x0152)
+typedef enum
+{
+    CML = 0,
+	LVPECL = 1,
+	LVDS = 2,
+	CMOS = 3
+} hmc7044DriverMode_t;
+
+// Enum to select the GPIx functionality. (0x0046, 0x0047, 0x0048, 0x0049)
+typedef enum
+{
+	GPI_ENABLE 					= (1) << 0,
+	GPI_DISABLE 				= (0) << 0,
+    FORCE_PLL1_HOLDOVER 		= (0x01) << 1 | GPI_ENABLE,
+	SELECT_PLL1_REF_BIT1 		= (0x02) << 1 | GPI_ENABLE,
+	SELECT_PLL1_REF_BIT2 		= (0x03) << 1 | GPI_ENABLE,
+	CHIP_SLEEP_MODE 			= (0x04) << 1 | GPI_ENABLE,
+	MUTE_REQUSET				= (0x05) << 1 | GPI_ENABLE,
+	SELECT_INTERNAL_VCO_TYPE	= (0x06) << 1 | GPI_ENABLE,
+	SELECT_HI_PERF_MODE			= (0x07) << 1 | GPI_ENABLE,
+	PULSE_GEN_REQUSET			= (0x08) << 1 | GPI_ENABLE,
+	RESEED_REQUEST				= (0x09) << 1 | GPI_ENABLE,
+	RESTART_REQUSET				= (0x0A) << 1 | GPI_ENABLE,
+	FORCE_FANOUT_MODE			= (0x0B) << 1 | GPI_ENABLE,
+	SLIP_REQUEST				= (0x0D) << 1 | GPI_ENABLE,
+} hmc7044GPIControl_t;
+
+// Enum to select the GPOx functionality. (0x0050, 0x0051, 0x0052, 0x0053)
+typedef enum
+{
+	GPO_ENABLE 						= (1) << 0,
+	GPO_DISABLE 					= (0) << 0,
+	GPO_CMOS_MODE 					= (1) << 1,
+	GPO_OPEN_DRAIN_MODE 			= (0) << 1,
+    ALARM_SIGNAL 					= (0x00) << 3 | GPO_ENABLE,
+    SPI_SDATA 						= (0x01) << 3 | GPO_ENABLE,
+	CLKIN3_SIGNAL_LOSS 				= (0x02) << 3 | GPO_ENABLE,
+	CLKIN2_SIGNAL_LOSS 				= (0x03) << 3 | GPO_ENABLE,
+	CLKIN1_SIGNAL_LOSS 				= (0x04) << 3 | GPO_ENABLE,
+	CLKIN0_SIGNAL_LOSS				= (0x05) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_ENABLE			= (0x06) << 3 | GPO_ENABLE,
+	PLL1_LOCK_DETECT				= (0x07) << 3 | GPO_ENABLE,
+	PLL1_ACQUIRING_LOCK				= (0x08) << 3 | GPO_ENABLE,
+	PLL1_NEAR_CLOCK_ACQ_STAT		= (0x09) << 3 | GPO_ENABLE,
+	PLL2_LOCK_DETECT				= (0x0A) << 3 | GPO_ENABLE,
+	PLL2_SYSREF_SYNC				= (0x0B) << 3 | GPO_ENABLE,
+	CLOCK_OUTPUT_PHASE_STAT			= (0x0C) << 3 | GPO_ENABLE,
+	PLL1_PLL2_LOCKED				= (0x0D) << 3 | GPO_ENABLE,
+	SYNC_REQUSRT_STAT				= (0x0E) << 3 | GPO_ENABLE,
+	PLL1_ACTIVE_CLKIN0				= (0x0F) << 3 | GPO_ENABLE,
+	PLL1_ACTIVE_CLKIN1				= (0x10) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_IN_RANGE_STAT		= (0x11) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_IN_STAT			= (0x12) << 3 | GPO_ENABLE,
+	PLL1_VCXO_STAT					= (0x13) << 3 | GPO_ENABLE,
+	PLL1_ACTIVE_CLKINx_STAT			= (0x14) << 3 | GPO_ENABLE,
+	PLL1_FSM_BIT0					= (0x15) << 3 | GPO_ENABLE,
+	PLL1_FSM_BIT1					= (0x16) << 3 | GPO_ENABLE,
+	PLL1_FSM_BIT2					= (0x17) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_EXIT_PHASE_BIT0	= (0x18) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_EXIT_PHASE_BIT1	= (0x19) << 3 | GPO_ENABLE,
+	CHANNEL_OUTPUT_FSM_BUSY			= (0x1A) << 3 | GPO_ENABLE,
+	SYSREF_FSM_STAT_BIT0			= (0x1B) << 3 | GPO_ENABLE,
+	SYSREF_FSM_STAT_BIT1			= (0x1C) << 3 | GPO_ENABLE,
+	SYSREF_FSM_STAT_BIT2			= (0x1D) << 3 | GPO_ENABLE,
+	SYSREF_FSM_STAT_BIT3			= (0x1E) << 3 | GPO_ENABLE,
+	FORCE_LOGIC_1					= (0x1F) << 3 | GPO_ENABLE,
+	FORCE_LOGIC_0					= (0x20) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_AVG_VALUE_BIT0	= (0x27) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_AVG_VALUE_BIT1	= (0x28) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_AVG_VALUE_BIT2	= (0x29) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_AVG_VALUE_BIT3	= (0x2A) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_CURR_VALUE_BIT0	= (0x2B) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_CURR_VALUE_BIT1	= (0x2C) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_CURR_VALUE_BIT2	= (0x2D) << 3 | GPO_ENABLE,
+	PLL1_HOLDOVER_CURR_VALUE_BIT3	= (0x2E) << 3 | GPO_ENABLE
+} hmc7044GPOControl_t;
+
+// Enum to select output channel (0x00CF, 0x00D9, 0x00E3, 0x00ED, 0x00F7,
+// 0x0101, 0x010B, 0x0115, 0x011F, 0x0129, 0x0133, 0x013D, 0x0147, 0x0151
+typedef enum
+{
+    CHANNEL_DIV = 0,
+	ANALOG_DELAY = 1,
+	OTHER_CHANNEL = 2,
+	VCO_CLOCK = 3
+} hmc7044OutputMuxSelect_t;
+
+// Enum to select output driver impedance selection for CML mode (0x00D0,
+// 0x00DA, 0x00E4, 0x00EE, 0x00F8, 0x0102, 0x010C, 0x0116, 0x0120, 0x012A,
+// 0x0134, 0x013E, 0x0148, 0x0152)
+typedef enum
+{
+    INTERNAL_RES_DISABLE = 0,
+	INTERNAL_100OHM_PER_PIN = 1,
+//	INTERNAL_RES_RESERVED = 2,
+	INTERNAL_50OHM_PER_PIN = 3
+} hmc7044DriverImpedance_t;
+
+// Enum to select pulse generator mode (0x005A)
+typedef enum
+{
+    PULSE_LEVEL_SENSITIVE = 0,
+	PULSE_ONE = 1,
+	PULSE_TWO = 2,
+	PULSE_FOUR = 3,
+	PULSE_EIGHT = 4,
+	PULSE_SIXTEEN = 5,
+//	PULSE_SIXTEEN = 6,
+	PULSE_CONTINOUS = 7
+} hmc7044SyncPulseGenControl_t;
+
+struct hmc7044_chan_spec {
+	unsigned int	num;
+	bool		disable;
+	bool		high_performance_mode_dis;
+	bool		start_up_mode_dynamic_enable;
+	bool		dynamic_driver_enable;
+	bool		output_control0_rb4_enable;
+	bool		force_mute_enable;
+	unsigned int	divider;
+	unsigned int	coarse_delay;
+	unsigned int	fine_delay;
+	hmc7044DriverMode_t driver_mode;
+	hmc7044DriverImpedance_t driver_impedance;
+	hmc7044OutputMuxSelect_t out_mux_mode;
+};
+
+struct hmc7044_config {
+	uint16_t addr;
+	uint8_t value;
+};
+
+struct hmc7044_dev {
+	struct spi_desc	*spi_desc;
+	bool		is_hmc7043;
+	uint32_t	clkin_freq[4];
+	uint32_t	clkin_freq_ccf[4];
+	uint32_t	vcxo_freq;
+	uint32_t	pll1_pfd;
+	uint32_t	pll2_freq;
+	uint32_t	pll1_loop_bw;
+	uint32_t	sysref_timer_div;
+	unsigned int	pll1_ref_prio_ctrl;
+	bool		clkin0_rfsync_en;
+	bool		clkin1_vcoin_en;
+	bool		high_performance_mode_clock_dist_en;
+	bool		rf_reseeder_en;
+	hmc7044SyncPinModeSelect_t sync_pin_mode;
+	hmc7044SyncPulseGenControl_t pulse_gen_mode;
+	uint32_t	in_buf_mode[5];
+	uint32_t	gpi_ctrl[4];
+	uint32_t	gpo_ctrl[4];
+	uint32_t	num_channels;
+	struct hmc7044_chan_spec	*channels;
+};
+
+struct hmc7044_init_param {
+	struct spi_init_param	*spi_init;
+	bool		is_hmc7043;
+	uint32_t	clkin_freq[4];
+	uint32_t	clkin_freq_ccf[4];
+	uint32_t	vcxo_freq;
+	uint32_t	pll1_pfd;
+	uint32_t	pll2_freq;
+	uint32_t	pll1_loop_bw;
+	uint32_t	sysref_timer_div;
+	unsigned int	pll1_ref_prio_ctrl;
+	bool		clkin0_rfsync_en;
+	bool		clkin1_vcoin_en;
+	bool		high_performance_mode_clock_dist_en;
+	bool		rf_reseeder_disable;
+	hmc7044SyncPinModeSelect_t sync_pin_mode;
+	hmc7044SyncPulseGenControl_t pulse_gen_mode;
+	uint32_t	in_buf_mode[5];
+	uint32_t	gpi_ctrl[4];
+	uint32_t	gpo_ctrl[4];
+	uint32_t	num_channels;
+	struct hmc7044_chan_spec	*channels;
+};
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+/* Initialize the device. */
+int32_t hmc7044_reg_init(struct hmc7044_dev **device,
+		     const struct hmc7044_init_param *init_param);
+int32_t hmc7044_init(struct hmc7044_dev **device,
+		     const struct hmc7044_init_param *init_param);
+/* Remove the device. */
+int32_t hmc7044_remove(struct hmc7044_dev *device);
+int32_t hmc7044_write(struct hmc7044_dev *dev,
+			 uint16_t reg, uint8_t val);
+int32_t hmc7044_read(struct hmc7044_dev *dev, uint16_t reg, uint8_t *val);
+int32_t hmc7044_clk_recalc_rate(struct hmc7044_dev *dev, uint32_t chan_num,
+				uint64_t *rate);
+int32_t hmc7044_clk_round_rate(struct hmc7044_dev *dev, uint32_t rate,
+			       uint64_t *rounded_rate);
+int32_t hmc7044_clk_set_rate(struct hmc7044_dev *dev, uint32_t chan_num,
+			     uint64_t rate);
+
+#endif // HMC7044_H_
@@ -0,0 +1,128 @@
+/***************************************************************************//**
+ * @file lmk04828.c
+ * @brief Implementation of AD9680 Driver.
+ * @author DBogdan ([email protected])
+ ********************************************************************************
+ * Copyright 2014-2016(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Analog Devices, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * - The use of this software may or may not infringe the patent rights
+ * of one or more patent holders. This license does not release you
+ * from the requirement that you obtain separate licenses from these
+ * patent holders to use this software.
+ * - Use of the software either in source or binary form, must be run
+ * on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdlib.h>
+#include <stdio.h>
+#include "lmk04828.h"
+#include "../../../include/error.h"
+
+/***************************************************************************//**
+ * @brief lmk04828_read
+ *******************************************************************************/
+int32_t lmk04828_read(struct lmk04828_dev *dev,
+			uint16_t reg_addr,
+			uint8_t *reg_data)
+{
+	uint8_t tx_buf[2];
+	uint8_t rx_buf[1];
+	int32_t ret;
+
+	tx_buf[0] = 0x80 | (reg_addr >> 8);
+	tx_buf[1] = reg_addr & 0xFF;
+
+
+	ret = spi_write_and_read_3wire(dev->spi_desc,
+			tx_buf, rx_buf, 2, 1);
+
+	*reg_data = rx_buf[0];
+
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief lmk04828_write
+ *******************************************************************************/
+int32_t lmk04828_write(struct lmk04828_dev *dev,
+			 uint16_t reg_addr,
+			 uint8_t reg_data)
+{
+	uint8_t buf[3];
+
+	int32_t ret;
+
+	buf[0] = reg_addr >> 8;
+	buf[1] = reg_addr & 0xFF;
+	buf[2] = reg_data;
+
+	ret = spi_write_and_read_3wire(dev->spi_desc,
+				 buf, NULL, 3, 0);
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief lmk04828_init
+ *******************************************************************************/
+int32_t lmk04828_init(struct lmk04828_dev **device,
+		     const struct lmk04828_init_param *init_param)
+{
+	int ret = SUCCESS;
+	struct lmk04828_dev *dev;
+
+	dev = (struct lmk04828_dev *)malloc(sizeof(*dev));
+	if (!dev)
+		return FAILURE;
+
+	/* SPI */
+	ret = spi_init(&dev->spi_desc, init_param->spi_init);
+
+	*device = dev;
+
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief Free the resources allocated by lmk04828_setup().
+ *
+ * @param dev - The device structure.
+ *
+ * @return SUCCESS in case of success, negative error code otherwise.
+*******************************************************************************/
+int32_t lmk04828_remove(struct lmk04828_dev *dev)
+{
+	int32_t ret;
+
+	ret = spi_remove(dev->spi_desc);
+
+	free(dev);
+
+	return ret;
+}
@@ -0,0 +1,90 @@
+/***************************************************************************//**
+ * @file lmk04828.h
+ * @brief Header file of lmk04828 Driver.
+ * @author DBogdan ([email protected])
+ ********************************************************************************
+ * Copyright 2014-2016(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Analog Devices, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * - The use of this software may or may not infringe the patent rights
+ * of one or more patent holders. This license does not release you
+ * from the requirement that you obtain separate licenses from these
+ * patent holders to use this software.
+ * - Use of the software either in source or binary form, must be run
+ * on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************/
+#ifndef LMK04828_H_
+#define LMK04828_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdint.h>
+#include "delay.h"
+#include "spi.h"
+#include "gpio.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+struct lmk04828_dev {
+	/* SPI */
+	struct spi_desc	*spi_desc;
+};
+
+struct lmk04828_init_param {
+	/* SPI */
+	struct spi_init_param	*spi_init;
+};
+
+struct lmk04828_config {
+	uint16_t addr;
+	uint8_t value;
+};
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+
+int32_t lmk04828_read(struct lmk04828_dev *dev,
+			uint16_t reg_addr,
+			uint8_t *reg_data);
+
+int32_t lmk04828_write(struct lmk04828_dev *dev,
+			 uint16_t reg_addr,
+			 uint8_t reg_data);
+
+int32_t lmk04828_init(struct lmk04828_dev **device,
+		     const struct lmk04828_init_param *init_param);
+
+int32_t lmk04828_remove(struct lmk04828_dev *dev);
+
+#endif
@@ -0,0 +1,129 @@
+/***************************************************************************//**
+ * @file lmx2594.c
+ * @brief Implementation of AD9680 Driver.
+ * @author DBogdan ([email protected])
+ ********************************************************************************
+ * Copyright 2014-2016(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Analog Devices, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * - The use of this software may or may not infringe the patent rights
+ * of one or more patent holders. This license does not release you
+ * from the requirement that you obtain separate licenses from these
+ * patent holders to use this software.
+ * - Use of the software either in source or binary form, must be run
+ * on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include "../lmx2594/lmx2594.h"
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "../../../include/error.h"
+
+/***************************************************************************//**
+ * @brief lmx2594_read
+ *******************************************************************************/
+int32_t lmx2594_read(struct lmx2594_dev *dev,
+			uint8_t reg_addr,
+			uint16_t *reg_data)
+{
+	uint8_t tx_buf[1];
+	uint8_t rx_buf[2];
+	int32_t ret;
+
+	tx_buf[0] = 0x80 | reg_addr;
+
+
+	ret = spi_write_and_read_3wire(dev->spi_desc,
+			tx_buf, rx_buf, 1, 2);
+
+	*reg_data = rx_buf[1];
+	*reg_data |= ((uint16_t)rx_buf[0]) << 8;
+
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief lmx2594_write
+ *******************************************************************************/
+int32_t lmx2594_write(struct lmx2594_dev *dev,
+			 uint8_t reg_addr,
+			 uint16_t reg_data)
+{
+	uint8_t buf[3];
+
+	int32_t ret;
+
+	buf[0] = reg_addr;
+	buf[1] = reg_data >> 8;
+	buf[2] = reg_data & 0xFF;
+
+	ret = spi_write_and_read_3wire(dev->spi_desc,
+				 buf, NULL, 3, 0);
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief lmx2594_init
+ *******************************************************************************/
+int32_t lmx2594_init(struct lmx2594_dev **device,
+		     const struct lmx2594_init_param *init_param)
+{
+	int ret = SUCCESS;
+	struct lmx2594_dev *dev;
+
+	dev = (struct lmx2594_dev *)malloc(sizeof(*dev));
+	if (!dev)
+		return FAILURE;
+
+	/* SPI */
+	ret = spi_init(&dev->spi_desc, init_param->spi_init);
+
+	*device = dev;
+
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief Free the resources allocated by lmx2594_setup().
+ *
+ * @param dev - The device structure.
+ *
+ * @return SUCCESS in case of success, negative error code otherwise.
+*******************************************************************************/
+int32_t lmx2594_remove(struct lmx2594_dev *dev)
+{
+	int32_t ret;
+
+	ret = spi_remove(dev->spi_desc);
+
+	free(dev);
+
+	return ret;
+}
@@ -0,0 +1,90 @@
+/***************************************************************************//**
+ * @file lmx2594.h
+ * @brief Header file of lmx2594 Driver.
+ * @author DBogdan ([email protected])
+ ********************************************************************************
+ * Copyright 2014-2016(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Analog Devices, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * - The use of this software may or may not infringe the patent rights
+ * of one or more patent holders. This license does not release you
+ * from the requirement that you obtain separate licenses from these
+ * patent holders to use this software.
+ * - Use of the software either in source or binary form, must be run
+ * on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************/
+#ifndef LMX2594_H_
+#define LMX2594_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdint.h>
+#include "delay.h"
+#include "spi.h"
+#include "gpio.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+struct lmx2594_dev {
+	/* SPI */
+	struct spi_desc	*spi_desc;
+};
+
+struct lmx2594_init_param {
+	/* SPI */
+	struct spi_init_param	*spi_init;
+};
+
+struct lmx2594_config {
+	uint8_t addr;
+	uint16_t value;
+};
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+
+int32_t lmx2594_read(struct lmx2594_dev *dev,
+			uint8_t reg_addr,
+			uint16_t *reg_data);
+
+int32_t lmx2594_write(struct lmx2594_dev *dev,
+			 uint8_t reg_addr,
+			 uint16_t reg_data);
+
+int32_t lmx2594_init(struct lmx2594_dev **device,
+		     const struct lmx2594_init_param *init_param);
+
+int32_t lmx2594_remove(struct lmx2594_dev *dev);
+
+#endif
@@ -0,0 +1,100 @@
+/***************************************************************************//**
+ *   @file   xilinx/xilinx_delay.c
+ *   @brief  Implementation of Xilinx Delay Functions.
+ *   @author Antoniu Miclaus ([email protected])
+********************************************************************************
+ * Copyright 2019(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include "delay.h"
+#include <sleep.h>
+#ifdef _XPARAMETERS_PS_H_
+#include "util.h"
+#include "xtime_l.h"
+#endif
+
+/******************************************************************************/
+/************************ Functions Definitions *******************************/
+/******************************************************************************/
+
+/**
+ * @brief Generate microseconds delay.
+ * @param usecs - Delay in microseconds.
+ * @return None.
+ */
+void udelay(uint32_t usecs)
+{
+#ifdef _XPARAMETERS_PS_H_
+	usleep(usecs);
+#else
+	usleep_MB(usecs);
+#endif
+}
+
+/**
+ * @brief Generate miliseconds delay.
+ * @param msecs - Delay in miliseconds.
+ * @return None.
+ */
+void mdelay(uint32_t msecs)
+{
+#ifdef _XPARAMETERS_PS_H_
+	usleep(msecs * 1000);
+#else
+	usleep_MB(msecs * 1000);
+#endif
+}
+
+/**
+ * @brief Get current time.
+ * @return Current time structure from system start (seconds, microseconds).
+ */
+struct time get_time(void)
+{
+	struct time t = {0, 0};
+#ifdef _XPARAMETERS_PS_H_
+	unsigned long long Xtime_Global;
+	uint32_t rem;
+
+	XTime_GetTime(&Xtime_Global);
+	t.s = div_u64_rem(Xtime_Global, COUNTS_PER_SECOND, &rem);
+	t.us = div_u64((uint64_t)rem * 1000000, COUNTS_PER_SECOND);
+#endif
+
+	return t;
+}
@@ -0,0 +1,464 @@
+/***************************************************************************//**
+ *   @file   xilinx/xilinx_gpio.c
+ *   @brief  Implementation of Xilinx GPIO Generic Driver.
+ *   @author Antoniu Miclaus ([email protected])
+********************************************************************************
+ * Copyright 2019(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include <stdlib.h>
+
+#include <xparameters.h>
+#ifdef XPAR_XGPIO_NUM_INSTANCES
+#include <xgpio.h>
+#endif
+#ifdef XPAR_XGPIOPS_NUM_INSTANCES
+#include <xgpiops.h>
+#endif
+
+#include "error.h"
+#include "gpio.h"
+#include "xilinx_gpio.h"
+
+/******************************************************************************/
+/************************ Functions Definitions *******************************/
+/******************************************************************************/
+
+/**
+ * @brief Prepare the GPIO decriptor.
+ * @param desc - The GPIO descriptor.
+ * @param param - The structure that contains the GPIO parameters.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t _gpio_init(struct gpio_desc *desc,
+		   const struct gpio_init_param *param)
+{
+	int32_t				ret;
+	struct xil_gpio_desc		*xdesc;
+	struct xil_gpio_init_param	*xinit;
+
+	ret = -1;
+
+	xdesc = desc->extra;
+	xinit = param->extra;
+
+	xdesc->type = xinit->type;
+	desc->number = param->number;
+
+	switch (xinit->type) {
+	case GPIO_PL:
+#ifdef XGPIO_H
+		xdesc->instance = (XGpio *)malloc(sizeof(XGpio));
+		if(!xdesc->instance)
+			goto pl_error;
+
+		xdesc->config = XGpio_LookupConfig(xinit->device_id);
+		if(xdesc->config == NULL)
+			goto pl_error;
+
+		ret = XGpio_CfgInitialize(xdesc->instance,
+					  xdesc->config,
+					  ((XGpio_Config*)xdesc->config)
+					  ->BaseAddress);
+		if(ret < 0)
+			goto pl_error;
+
+		break;
+pl_error:
+		free(xdesc->instance);
+#endif
+		goto error;
+	case GPIO_PS:
+#ifdef XGPIOPS_H
+		xdesc->instance = (XGpioPs *)malloc(sizeof(XGpioPs));
+		if(!xdesc->instance)
+			goto ps_error;
+
+		xdesc->config = XGpioPs_LookupConfig(xinit->device_id);
+		if(xdesc->config == NULL)
+			goto ps_error;
+
+		ret = XGpioPs_CfgInitialize(xdesc->instance,
+					    xdesc->config,
+					    ((XGpioPs_Config*)xdesc->config)->BaseAddr);
+		if(ret < 0)
+			goto ps_error;
+		break;
+ps_error:
+		free(xdesc->instance);
+#endif
+		goto error;
+error:
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Obtain the GPIO decriptor.
+ * @param desc - The GPIO descriptor.
+ * @param param - GPIO initialization parameters
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_get(struct gpio_desc **desc,
+		     const struct gpio_init_param *param)
+{
+	struct gpio_desc	*descriptor;
+	struct xil_gpio_desc	*extra;
+	int32_t			ret;
+
+	descriptor = (struct gpio_desc *)malloc(sizeof(*descriptor));
+	extra = (struct xil_gpio_desc*)malloc(sizeof(*extra));
+
+	if (!descriptor || !extra)
+		return -1;
+
+	descriptor->extra = extra;
+	ret = _gpio_init(descriptor, param);
+
+	if(ret != 0)
+		goto error;
+
+	*desc = descriptor;
+
+	return 0;
+error:
+	free(extra);
+	free(descriptor);
+
+	return -1;
+}
+
+/**
+ * @brief Get the value of an optional GPIO.
+ * @param desc - The GPIO descriptor.
+ * @param param - GPIO Initialization parameters.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_get_optional(struct gpio_desc **desc,
+			      const struct gpio_init_param *param)
+{
+	if(param == NULL) {
+		*desc = NULL;
+		return 0;
+	}
+
+	return xil_gpio_get(desc, param);
+}
+
+/**
+ * @brief Free the resources allocated by gpio_get().
+ * @param desc - The GPIO descriptor.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_remove(struct gpio_desc *desc)
+{
+	if (desc != NULL) {
+		free(((struct xil_gpio_desc *)(desc->extra))->instance);
+		free(desc->extra);
+		free(desc);
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Enable the input direction of the specified GPIO.
+ * @param desc - The GPIO descriptor.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_direction_input(struct gpio_desc *desc)
+{
+	struct xil_gpio_desc	*extra;
+#ifdef XGPIO_H
+	uint8_t pin = desc->number;
+	uint32_t channel = 1;
+	uint32_t config	 = 0;
+#endif
+	extra = desc->extra;
+
+	switch (extra->type) {
+	case GPIO_PL:
+#ifdef XGPIO_H
+		/* We assume that pin 32 is the first pin from channel 2 */
+		if (pin >= 32) {
+			channel = 2;
+			pin -= 32;
+		}
+
+		config = XGpio_GetDataDirection((XGpio *)extra->instance,
+						channel);
+		config |= (1 << pin);
+		XGpio_SetDataDirection((XGpio *)extra->instance,
+				       channel,
+				       config);
+#endif
+		break;
+	case GPIO_PS:
+#ifdef XGPIOPS_H
+		XGpioPs_SetDirectionPin(extra->instance,
+					desc->number,
+					GPIO_IN);
+#endif
+		break;
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Enable the output direction of the specified GPIO.
+ * @param desc - The GPIO descriptor.
+ * @param value - The value.
+ *                Example: GPIO_HIGH
+ *                         GPIO_LOW
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_direction_output(struct gpio_desc *desc,
+				  uint8_t value)
+{
+	struct xil_gpio_desc	*extra;
+#ifdef XGPIO_H
+	uint8_t pin = desc->number;
+	uint8_t channel;
+	uint32_t reg_val;
+#endif
+	extra = desc->extra;
+
+	switch (extra->type) {
+	case GPIO_PL:
+#ifdef XGPIO_H
+		if (pin >= 32) {
+			channel = 2;
+			pin -= 32;
+		} else
+			channel = 1;
+
+		reg_val = XGpio_GetDataDirection(extra->instance,
+						 channel);
+		reg_val &= ~(1 << pin);
+		XGpio_SetDataDirection(extra->instance,
+				       channel,
+				       reg_val);
+		reg_val = XGpio_DiscreteRead(extra->instance,
+					     channel);
+		if(value)
+			reg_val |= (1 << pin);
+		else
+			reg_val &= ~(1 << pin);
+		XGpio_DiscreteWrite(extra->instance,
+				    channel,
+				    reg_val);
+#endif
+		break;
+	case GPIO_PS:
+#ifdef XGPIOPS_H
+		XGpioPs_SetDirectionPin(extra->instance,
+					desc->number,
+					GPIO_OUT);
+		XGpioPs_SetOutputEnablePin(extra->instance,
+					   desc->number,
+					   GPIO_OUT);
+		XGpioPs_WritePin(extra->instance,
+				 desc->number,
+				 value);
+#endif
+		break;
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Get the direction of the specified GPIO.
+ * @param desc - The GPIO descriptor.
+ * @param direction - The direction.
+ *                    Example: GPIO_OUT
+ *                             GPIO_IN
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_get_direction(struct gpio_desc *desc,
+			       uint8_t *direction)
+{
+	if (!desc)
+		return -1;
+
+	struct xil_gpio_desc	*extra;
+	uint8_t pin = desc->number;
+
+#ifdef XGPIO_H
+	uint8_t channel;
+#endif
+	extra = desc->extra;
+
+	switch (extra->type) {
+	case GPIO_PL:
+#ifdef XGPIO_H
+		if (pin >= 32) {
+			channel = 2;
+			pin -= 32;
+		} else
+			channel = 1;
+		*direction = ((XGpio_GetDataDirection(extra->instance,
+						      channel) >> pin) & 0x1) ^ 0x1;
+#endif
+		break;
+	case GPIO_PS:
+#ifdef XGPIOPS_H
+		*direction = XGpioPs_GetDirectionPin(extra->instance, pin);
+#endif
+		break;
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Set the value of the specified GPIO.
+ * @param desc - The GPIO descriptor.
+ * @param value - The value.
+ *                Example: GPIO_HIGH
+ *                         GPIO_LOW
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_set_value(struct gpio_desc *desc,
+			   uint8_t value)
+{
+	struct xil_gpio_desc	*extra;
+#ifdef XGPIO_H
+	uint8_t pin = desc->number;
+	uint8_t channel;
+	uint32_t reg_val;
+#endif
+	extra = desc->extra;
+
+	switch (extra->type) {
+	case GPIO_PL:
+#ifdef XGPIO_H
+		if (pin >= 32) {
+			channel = 2;
+			pin -= 32;
+		} else
+			channel = 1;
+
+		reg_val = XGpio_DiscreteRead(extra->instance, channel);
+		if(value)
+			reg_val |= (1 << pin);
+		else
+			reg_val &= ~(1 << pin);
+		XGpio_DiscreteWrite(extra->instance, channel, reg_val);
+#endif
+		break;
+	case GPIO_PS:
+#ifdef XGPIOPS_H
+		XGpioPs_WritePin(extra->instance, desc->number, value);
+#endif
+		break;
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Get the value of the specified GPIO.
+ * @param desc - The GPIO descriptor.
+ * @param value - The value.
+ *                Example: GPIO_HIGH
+ *                         GPIO_LOW
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_get_value(struct gpio_desc *desc,
+			   uint8_t *value)
+{
+	if (!desc)
+		return -1;
+
+	struct xil_gpio_desc	*extra;
+	uint8_t pin = desc->number;
+
+#ifdef XGPIO_H
+	uint8_t channel;
+#endif
+	extra = desc->extra;
+
+	switch (extra->type) {
+	case GPIO_PL:
+#ifdef XGPIO_H
+		if (pin >= 32) {
+			channel = 2;
+			pin -= 32;
+		} else
+			channel = 1;
+		*value = (XGpio_DiscreteRead(extra->instance, channel) >> pin) & 0x01;
+#endif
+		break;
+	case GPIO_PS:
+#ifdef XGPIOPS_H
+		*value = XGpioPs_ReadPin(extra->instance, pin);
+#endif
+		break;
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Xilinx platform specific GPIO platform ops structure
+ */
+const struct gpio_platform_ops xil_gpio_ops = {
+	.gpio_ops_get = &xil_gpio_get,
+	.gpio_ops_get_optional = &xil_gpio_get_optional,
+	.gpio_ops_remove = &xil_gpio_remove,
+	.gpio_ops_direction_input = &xil_gpio_direction_input,
+	.gpio_ops_direction_output = &xil_gpio_direction_output,
+	.gpio_ops_get_direction = &xil_gpio_get_direction,
+	.gpio_ops_set_value = &xil_gpio_set_value,
+	.gpio_ops_get_value = &xil_gpio_get_value,
+};
@@ -0,0 +1,95 @@
+/*******************************************************************************
+ *   @file   xilinx/xilinx_gpio.h
+ *   @brief  Header containing extra types used in the gpio driver
+ *   @author scuciurean ([email protected])
+********************************************************************************
+ * Copyright 2019(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+#ifndef XILINX_GPIO_H_
+#define XILINX_GPIO_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+
+/**
+ * @enum xil_gpio_type
+ * @brief Xilinx platform architecture sections
+ */
+enum xil_gpio_type {
+	/** Programmable Logic */
+	GPIO_PL,
+	/** Processing System */
+	GPIO_PS
+};
+
+/**
+ * @struct xil_gpio_init_param
+ * @brief Structure holding the initialization parameters for Xilinx platform
+ * specific GPIO parameters.
+ */
+struct xil_gpio_init_param {
+	/** Xilinx architecture */
+	enum xil_gpio_type	type;
+	/** Device ID */
+	uint32_t		device_id;
+};
+
+/**
+ * @struct xil_gpio_desc
+ * @brief Xilinx platform specific GPIO descriptor
+ */
+struct xil_gpio_desc {
+	/** Xilinx architecture */
+	enum xil_gpio_type	type;
+	/** Xilinx GPIO configuration */
+	void			*config;
+	/** Xilinx GPIO Instance */
+	void			*instance;
+};
+
+/**
+ * @brief Xilinx platform specific gpio platform ops structure
+ */
+extern const struct gpio_platform_ops xil_gpio_ops;
+
+#endif
@@ -0,0 +1,360 @@
+/***************************************************************************//**
+ *   @file   xilinx/xilinx_gpio_irq.c
+ *   @brief  Implementation of Xilinx GPIO IRQ Generic Driver.
+ *   @author Porumb Andrei ([email protected])
+********************************************************************************
+ * Copyright 2021(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include <stdlib.h>
+#include "xparameters.h"
+#include "error.h"
+#include "xilinx_gpio_irq.h"
+#include "util.h"
+#include "list.h"
+#include "irq.h"
+
+/******************************************************************************/
+/************************ Functions Definitions *******************************/
+/******************************************************************************/
+
+/**
+ * @brief Comparing function used by list.
+ * @param desc_a - Compared item
+ * @param desc_b - Reference item
+ * @return - 0 if items match
+ */
+static int32_t call_cmp(struct xil_callback_desc *desc_a,
+			struct xil_callback_desc *desc_b)
+{
+	return desc_a->pin_nb - desc_b->pin_nb;
+}
+
+/**
+ * @brief Function called when GPIO IRQ occurs.
+ * @param param - GPIO IRQ desc's extra field
+ * @return - None.
+ */
+static void xil_gpio_irq_handler(struct xil_gpio_irq_desc *param)
+{
+	int32_t status = 0;
+	int32_t pin_nb;
+	struct xil_callback_desc *callback_desc;
+
+	status = iterator_move_to_idx(param->it, 0);
+	while(!status) {
+		iterator_read(param->it, &callback_desc);
+		status = iterator_move(param->it, 1);
+		if(XGpioPs_IntrGetStatusPin(&param->my_Gpio, callback_desc->pin_nb))
+			callback_desc->triggered = true;
+	}
+
+	status = iterator_move_to_idx(param->it, 0);
+	while(!status) {
+		iterator_read(param->it, &callback_desc);
+		status = iterator_move(param->it, 1);
+		if(callback_desc->triggered == true) {
+			callback_desc->triggered = false;
+			XGpioPs_IntrDisablePin(&param->my_Gpio, callback_desc->pin_nb);
+			XGpioPs_IntrClearPin(&param->my_Gpio, callback_desc->pin_nb);
+			callback_desc->callback.legacy_callback(callback_desc->callback.ctx, 0U, NULL);
+			if(callback_desc->enabled)
+				XGpioPs_IntrEnablePin(&param->my_Gpio, callback_desc->pin_nb);
+		}
+	}
+}
+
+/**
+ * @brief Disable specific GPIO IRQ pin.
+ * @param desc - The GPIO IRQ controller descriptor.
+ * @param irq_id - Pin number.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_irq_disable(struct irq_ctrl_desc *desc, uint32_t irq_id)
+{
+	int32_t status;
+	struct xil_gpio_irq_desc *extra;
+	struct xil_callback_desc *callback_desc;
+
+	extra = desc->extra;
+
+	status = iterator_move_to_idx(extra->it, 0);
+	while(!status) {
+		iterator_read(extra->it, &callback_desc);
+		status = iterator_move(extra->it, 1);
+		if(callback_desc->pin_nb == irq_id) {
+			callback_desc->enabled = false;
+			break;
+		}
+	}
+
+	XGpioPs_IntrDisablePin(&extra->my_Gpio, irq_id);
+
+	return 0;
+}
+
+/**
+ * @brief Initialize the GPIO IRQ controller.
+ * @param desc - The GPIO IRQ controller descriptor.
+ * @param param - The GPIO IRQ controller initial parameters.
+ * irq_ctrl_id from irq_init_param is the interrupt id for the parent controller
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_irq_ctrl_init(struct irq_ctrl_desc **desc,
+			       const struct irq_init_param *param)
+{
+	int32_t i;
+	int32_t status;
+	struct irq_ctrl_desc *ldesc;
+	static XGpioPs_Config *GPIO_Config;
+	struct xil_gpio_irq_desc *xil_desc;
+	struct xil_gpio_irq_init_param *xil_ip;
+	struct callback_desc callback;
+
+	xil_desc = (struct xil_gpio_irq_desc *)calloc(1, sizeof(*xil_desc));
+	if(!xil_desc)
+		return -ENOMEM;
+
+	ldesc = (struct irq_ctrl_desc *)calloc(1, sizeof(*ldesc));
+	if(!ldesc) {
+		free(xil_desc);
+		return -ENOMEM;
+	}
+
+	xil_ip = param->extra;
+	GPIO_Config = XGpioPs_LookupConfig(xil_ip->gpio_device_id);
+	status = XGpioPs_CfgInitialize(&xil_desc->my_Gpio, GPIO_Config,
+				       GPIO_Config->BaseAddr);
+	if(status)
+		goto error_desc;
+
+	ldesc->extra = xil_desc;
+	xil_desc->parent_desc = xil_ip->parent_desc;
+
+	status = list_init(&xil_desc->callback_list, LIST_DEFAULT,
+				 call_cmp);
+	if(status)
+		goto error_list;
+
+	status = iterator_init(&xil_desc->it, xil_desc->callback_list, 0);
+	if(status) {
+		iterator_remove(xil_desc->it);
+		goto error_list;
+	}
+
+	ldesc->irq_ctrl_id = param->irq_ctrl_id;
+	status = irq_trigger_level_set(xil_desc->parent_desc, ldesc->irq_ctrl_id,
+					     IRQ_EDGE_RISING);
+	if(status)
+		goto error_op;
+
+	status = irq_enable(xil_desc->parent_desc, ldesc->irq_ctrl_id);
+	if(status)
+		goto error_op;
+
+	callback.legacy_callback = &xil_gpio_irq_handler;
+	callback.ctx = ldesc->extra;
+	status = irq_register_callback(xil_desc->parent_desc, ldesc->irq_ctrl_id,
+					     &callback);
+	if(status)
+		goto error_op;
+
+	*desc = ldesc;
+
+	return 0;
+
+error_op:
+	iterator_remove(xil_desc->it);
+error_list:
+	list_remove(xil_desc->callback_list);
+error_desc:
+	free(xil_desc);
+	free(ldesc);
+	return status;
+}
+
+/**
+ * @brief Set GPIO interrupt trigger level.
+ * @param desc - The GPIO IRQ controller descriptor.
+ * @param irq_id - Pin number.
+ * @param trig - New trigger level for the GPIO interrupt.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_irq_trigger_level_set(struct irq_ctrl_desc *desc,
+				       uint32_t irq_id,
+				       enum irq_trig_level trig)
+{
+	static const int32_t trig_level[5] = {XGPIOPS_IRQ_TYPE_LEVEL_LOW,
+					      XGPIOPS_IRQ_TYPE_LEVEL_HIGH,
+					      XGPIOPS_IRQ_TYPE_EDGE_FALLING,
+					      XGPIOPS_IRQ_TYPE_EDGE_RISING,
+					      XGPIOPS_IRQ_TYPE_EDGE_BOTH
+					     };
+	struct xil_gpio_irq_desc *extra;
+
+	extra = desc->extra;
+	XGpioPs_SetIntrTypePin(&extra->my_Gpio, irq_id, trig_level[trig]);
+
+	return 0;
+}
+
+/**
+ * @brief Register pin specific GPIO interrupt.
+ * @param desc - The GPIO IRQ controller descriptor.
+ * @param irq_id - Pin number.
+ * @param callback_desc - Callback.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_irq_register_callback(struct irq_ctrl_desc *desc,
+				       uint32_t irq_id,
+				       struct callback_desc *callback_desc)
+{
+	struct xil_callback_desc *dev_callback;
+	struct xil_gpio_irq_desc *extra;
+
+	dev_callback = (struct xil_callback_desc *)calloc(1,
+			sizeof(*dev_callback));
+	if(!dev_callback)
+		return -1;
+
+	dev_callback->pin_nb = irq_id;
+	dev_callback->callback.legacy_callback = callback_desc->legacy_callback;
+	dev_callback->callback.ctx = callback_desc->ctx;
+	dev_callback->triggered = false;
+
+	extra = desc->extra;
+	XGpioPs_SetDirectionPin(&extra->my_Gpio, irq_id, 0);
+	list_add_last(extra->callback_list, dev_callback);
+
+	return 0;
+}
+
+/**
+ * @brief Unregister pin specific GPIO interrupt.
+ * @param desc - The GPIO IRQ controller descriptor.
+ * @param irq_id - Pin number.
+ * @param cb - Callback descriptor.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_irq_unregister_callback(struct irq_ctrl_desc *desc,
+		uint32_t irq_id, struct callback_desc *cb)
+{
+	int32_t status;
+	struct xil_gpio_irq_desc *extra;
+	struct xil_callback_desc *dev_callback;
+	struct xil_callback_desc search_callback;
+
+	extra = desc->extra;
+	search_callback.pin_nb = irq_id;
+	status = list_get_find(extra->callback_list, &dev_callback,
+				     &search_callback);
+	if(status)
+		return -ENXIO;
+
+	free(dev_callback);
+
+	return 0;
+}
+
+/**
+ * @brief Enable specific GPIO IRQ pin.
+ * @param desc - The GPIO IRQ controller descriptor.
+ * @param irq_id - Pin number.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_irq_enable(struct irq_ctrl_desc *desc, uint32_t irq_id)
+{
+	int32_t status;
+	struct xil_gpio_irq_desc *extra;
+	struct xil_callback_desc *callback_desc;
+
+	extra = desc->extra;
+
+	status = iterator_move_to_idx(extra->it, 0);
+	while(!status) {
+		iterator_read(extra->it, &callback_desc);
+		status = iterator_move(extra->it, 1);
+		if(callback_desc->pin_nb == irq_id) {
+			callback_desc->enabled = true;
+			XGpioPs_IntrClearPin(&extra->my_Gpio, irq_id);
+			break;
+		}
+	}
+
+	XGpioPs_IntrEnablePin(&extra->my_Gpio, irq_id);
+
+	return 0;
+}
+
+/**
+ * @brief Remove the GPIO IRQ controller.
+ * @param desc - The GPIO IRQ controller descriptor.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_gpio_irq_ctrl_remove(struct irq_ctrl_desc *desc)
+{
+	struct xil_gpio_irq_desc *extra;
+	struct xil_callback_desc *callback_desc;
+
+	if (!desc)
+		return -EINVAL;
+
+	extra = desc->extra;
+	while (0 == list_get_first(extra->callback_list, &callback_desc))
+		free(callback_desc);
+
+	iterator_remove(extra->it);
+	list_remove(extra->callback_list);
+	free(extra);
+	free(desc);
+
+	return 0;
+}
+
+/**
+ * @brief Xilinx platform specific GPIO IRQ platform ops structure
+ */
+const struct irq_platform_ops xil_gpio_irq_ops = {
+	.init = &xil_gpio_irq_ctrl_init,
+	.enable = &xil_gpio_irq_enable,
+	.disable = &xil_gpio_irq_disable,
+	.trigger_level_set = &xil_gpio_irq_trigger_level_set,
+	.register_callback = &xil_gpio_irq_register_callback,
+	.unregister_callback = xil_gpio_irq_unregister_callback,
+	.remove = &xil_gpio_irq_ctrl_remove
+};
@@ -0,0 +1,92 @@
+/***************************************************************************//**
+ *   @file   xilinx_gpio_irq.h
+ *   @brief  Implementation of Xilinx GPIO IRQ Generic Driver.
+ *   @author Porumb Andrei ([email protected])
+********************************************************************************
+ * Copyright 2021(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+#ifndef XILINX_GPIO_IRQ_H_
+#define XILINX_GPIO_IRQ_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include "stdbool.h"
+#include "list.h"
+#include "xgpiops.h"
+#include "irq.h"
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+/**
+ * @struct xil_callback_desc
+ * @brief Structure holding callback parameters for each pin
+ */
+struct xil_callback_desc {
+	int32_t pin_nb;
+	struct callback_desc callback;
+	bool triggered;
+	bool enabled;
+};
+
+/**
+ * @struct xil_gpio_irq_init_param
+ * @brief Structure holding the initialization parameters for Xilinx platform
+ * specific GPIO IRQ parameters.
+ */
+struct xil_gpio_irq_init_param {
+	struct irq_ctrl_desc *parent_desc;
+	int32_t gpio_device_id;
+};
+
+/**
+ * @struct xil_gpio_irq_desc
+ * @brief Xilinx platform specific GPIO IRQ descriptor
+ */
+struct xil_gpio_irq_desc {
+	struct irq_ctrl_desc *parent_desc;
+	XGpioPs my_Gpio;
+	struct list_desc *callback_list;
+	struct iterator *it;
+};
+
+/**
+ * @brief Xilinx specific GPIO IRQ platform ops structure
+ */
+extern const struct irq_platform_ops xil_gpio_irq_ops;
+
+#endif
@@ -0,0 +1,514 @@
+/***************************************************************************//**
+ *   @file   xilinx/xilinx_i2c.c
+ *   @brief  Implementation of Xilinx I2C Generic Driver.
+ *   @author Antoniu Miclaus ([email protected])
+********************************************************************************
+ * Copyright 2019(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include <stdlib.h>
+
+#include <xparameters.h>
+#ifdef XPAR_XIIC_NUM_INSTANCES
+#include <xiic.h>
+#endif
+#ifdef XPAR_XIICPS_NUM_INSTANCES
+#include <xiicps.h>
+#endif
+
+#include "error.h"
+#include "i2c.h"
+#include "xilinx_i2c.h"
+#include "list.h"
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+
+static struct list_desc *pl_list = NULL;
+static struct iterator  *pl_it = NULL;
+
+#ifdef XIICPS_H
+static struct list_desc *ps_list = NULL;
+static struct iterator  *ps_it = NULL;
+#endif /* XIICPS_H */
+
+/**
+ * @struct inst_table_item
+ * @brief Table item for I2C cores already started.
+ */
+struct inst_table_item {
+	/** Instance the BSP driver uses for this core. */
+	void *instance;
+	/** Core ID in BSP. */
+	uint32_t device_id;
+	/** Number of ADI driver instances running on this core. */
+	uint32_t inst_no;
+};
+
+#ifdef XPAR_XIICPS_NUM_INSTANCES
+/** Save the current state of the bitrate to not change it each time */
+static uint32_t ps_last_bitrate = 0;
+#endif
+
+/**
+ * @brief Xilinx platform specific I2C platform ops structure
+ */
+const struct i2c_platform_ops xil_i2c_ops = {
+	.i2c_ops_init = &xil_i2c_init,
+	.i2c_ops_write = &xil_i2c_write,
+	.i2c_ops_read = &xil_i2c_read,
+	.i2c_ops_remove = &xil_i2c_remove
+};
+
+/******************************************************************************/
+/************************ Functions Definitions *******************************/
+/******************************************************************************/
+
+/**
+ * @brief Compare two I2C cores by ID.
+ * @param el1 - First I2C core to compare.
+ * @param el2 - Second I2C core to compare.
+ * @return \ref 0 if the two cores have the same ID,
+ *         \ref difference between the first and the second IDs otherwise.
+ */
+static int32_t xil_i2c_cmp(void *el1, void *el2)
+{
+	struct inst_table_item *sel1 = el1, *sel2 = el2;
+
+	return (sel1->device_id - sel2->device_id);
+}
+
+/**
+ * @brief Configure slave address and bitrate if needed
+ * @param desc - Descriptor of the I2C device
+ * @return 0 in case of success, -1 otherwise.
+ */
+static int32_t xil_i2c_set_transmission_config(struct i2c_desc *desc)
+{
+	struct xil_i2c_desc *xil_i2c_desc = desc->extra;
+#ifdef XIICPS_H
+	int32_t ret;
+#endif
+
+	switch (xil_i2c_desc->type) {
+	case IIC_PL:
+#ifdef XIIC_H
+		break;
+#endif
+		return -1;
+	case IIC_PS:
+#ifdef XIICPS_H
+		if (desc->max_speed_hz != ps_last_bitrate) {
+			ret = XIicPs_SetSClk(xil_i2c_desc->instance, desc->max_speed_hz);
+			if (ret != XST_SUCCESS)
+				return -1;
+			ps_last_bitrate = desc->max_speed_hz;
+		}
+		break;
+#endif
+		return -1;
+	default:
+
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Initialize the I2C communication peripheral.
+ * @param desc - The I2C descriptor.
+ * @param param - The structure that contains the I2C parameters.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_i2c_init(struct i2c_desc **desc,
+		     const struct i2c_init_param *param)
+{
+	int32_t		ret;
+	struct i2c_desc	*idesc;
+	struct xil_i2c_desc	*xdesc;
+	struct xil_i2c_init_param	*xinit;
+
+	idesc = (struct i2c_desc *)malloc(sizeof(*idesc));
+	xdesc = (struct xil_i2c_desc *)malloc(sizeof(*xdesc));
+
+	if(!idesc || !xdesc)
+		goto error;
+
+	idesc->max_speed_hz = param->max_speed_hz;
+	idesc->slave_address = param->slave_address;
+	xinit = param->extra;
+
+	idesc->extra = xdesc;
+	xdesc->type = xinit->type;
+	xdesc->device_id = xinit->device_id;
+	switch (xinit->type) {
+	case IIC_PL:
+#ifdef XIIC_H
+		; /** Intentional empty statement */
+		struct inst_table_item tab_check_pl;
+		struct inst_table_item *temp_el_pl;
+
+		if (!pl_list)
+			list_init(&pl_list, LIST_DEFAULT, xil_i2c_cmp);
+		if (!pl_it)
+			iterator_init(&pl_it, pl_list, true);
+
+		tab_check_pl.device_id = xdesc->device_id;
+
+		if (!IS_ERR_VALUE(list_read_find(pl_list, (void **)&temp_el_pl,
+					&tab_check_pl))) {
+			xdesc->instance = temp_el_pl->instance;
+			temp_el_pl->inst_no++;
+			break;
+		}
+
+		xdesc->instance = (XIic *)malloc(sizeof(XIic));
+		if(!xdesc->instance)
+			goto pl_error;
+
+		xdesc->config = XIic_LookupConfig(xinit->device_id);
+		if(xdesc->config == NULL)
+			goto pl_error;
+
+		ret = XIic_CfgInitialize(xdesc->instance,
+					 xdesc->config,
+					 ((XIic_Config*)xdesc->config)
+					 ->BaseAddress);
+		if(ret != 0)
+			goto pl_error;
+
+		ret = XIic_Start(xdesc->instance);
+		if(ret != 0)
+			goto pl_error;
+
+		ret = XIic_SetAddress(xdesc->instance,
+				      XII_ADDR_TO_SEND_TYPE,
+				      param->slave_address);
+		if(ret != 0)
+			goto pl_error;
+
+		ret = XIic_SelfTest(xdesc->instance);
+		if(ret < 0)
+			goto pl_error;
+
+		ret = XIic_SetGpOutput(xdesc->instance, 1);
+		if(ret < 0)
+			goto pl_error;
+
+		temp_el_pl = (struct inst_table_item*)calloc(1, sizeof(*temp_el_pl));
+		temp_el_pl->device_id = xinit->device_id;
+		temp_el_pl->inst_no = 1;
+		temp_el_pl->instance = xdesc->instance;
+		pl_list->push(pl_list, temp_el_pl);
+
+		break;
+pl_error:
+		free(xdesc->instance);
+#endif
+		goto error;
+	case IIC_PS:
+#ifdef XIICPS_H
+		; /** Intentional empty statement */
+		struct inst_table_item tab_check_ps;
+		struct inst_table_item *temp_el_ps;
+
+		if (!pl_list)
+			list_init(&ps_list, LIST_DEFAULT, xil_i2c_cmp);
+		if (!pl_it)
+			iterator_init(&ps_it, ps_list, true);
+
+		tab_check_ps.device_id = xdesc->device_id;
+
+		if (!IS_ERR_VALUE(list_read_find(ps_list,
+					(void **)&temp_el_ps,
+					&tab_check_ps))) {
+			xdesc->instance = temp_el_ps->instance;
+			temp_el_ps->inst_no++;
+			break;
+		}
+
+		xdesc->instance = (XIicPs *)malloc(sizeof(XIicPs));
+		if(!xdesc->instance)
+			goto ps_error;
+
+		xdesc->config = XIicPs_LookupConfig(xinit->device_id);
+		if(xdesc->config == NULL)
+			goto ps_error;
+
+		ret = XIicPs_CfgInitialize(xdesc->instance,
+					   xdesc->config,
+					   ((XIicPs_Config*)xdesc->config)
+					   ->BaseAddress);
+		if(ret != 0)
+			goto ps_error;
+
+		XIicPs_SetSClk(xdesc->instance, param->max_speed_hz);
+
+		temp_el_ps = (struct inst_table_item*)calloc(1, sizeof(*temp_el_ps));
+		temp_el_ps->device_id = xinit->device_id;
+		temp_el_ps->inst_no = 1;
+		temp_el_ps->instance = xdesc->instance;
+		ps_list->push(ps_list, temp_el_ps);
+
+		break;
+ps_error:
+		free(xdesc->instance);
+#endif
+		goto error;
+
+	default:
+		goto error;
+		break;
+	}
+
+	*desc = idesc;
+
+	return 0;
+
+error:
+	free(idesc);
+	free(xdesc);
+
+	return -1;
+}
+
+/**
+ * @brief Free the resources allocated by i2c_init().
+ * @param desc - The I2C descriptor.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_i2c_remove(struct i2c_desc *desc)
+{
+	struct xil_i2c_desc	*xdesc;
+	int32_t		ret;
+
+	xdesc = desc->extra;
+
+	switch (xdesc->type) {
+	case IIC_PL:
+#ifdef XIIC_H
+		; /** Intentional empty statement */
+		struct inst_table_item tab_check_pl;
+		struct inst_table_item *temp_el_pl;
+		tab_check_pl.device_id = xdesc->device_id;
+		ret = iterator_find(pl_it, &tab_check_pl);
+		if (ret != 0)
+			goto error;
+		iterator_read(pl_it, (void **)&temp_el_pl);
+		temp_el_pl->inst_no--;
+		if (temp_el_pl->inst_no != 0)
+			break;
+
+		ret = XIic_Stop(((XIic *)xdesc->instance));
+
+		if(ret != 0)
+			goto error;
+
+		/** Remove list element */
+		iterator_get(pl_it, (void **)&temp_el_pl);
+		free(temp_el_pl);
+		break;
+#endif
+		goto error;
+	case IIC_PS:
+#ifdef XIICPS_H
+		; /** Intentional empty statement */
+		struct inst_table_item tab_check_ps;
+		struct inst_table_item *temp_el_ps;
+		tab_check_ps.device_id = xdesc->device_id;
+		ret = iterator_find(ps_it, &tab_check_ps);
+		if (ret != 0)
+			goto error;
+		iterator_read(ps_it, (void **)&temp_el_ps);
+		temp_el_ps->inst_no--;
+		if (temp_el_ps->inst_no != 0)
+			break;
+
+		/** Remove list element */
+		iterator_get(ps_it, (void **)&temp_el_ps);
+		free(temp_el_ps);
+		break;
+#endif
+		/* Intended fallthrough */
+error:
+	default:
+
+		return -1;
+	}
+
+	free(desc->extra);
+	free(desc);
+
+	return 0;
+}
+
+/**
+ * @brief Write data to a slave device.
+ * @param desc - The I2C descriptor.
+ * @param data - Buffer that stores the transmission data.
+ * @param bytes_number - Number of bytes to write.
+ * @param stop_bit - Stop condition control.
+ *                   Example: 0 - A stop condition will not be generated;
+ *                            1 - A stop condition will be generated.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_i2c_write(struct i2c_desc *desc,
+		      uint8_t *data,
+		      uint8_t bytes_number,
+		      uint8_t stop_bit)
+{
+	struct xil_i2c_desc	*xdesc;
+	int32_t		ret;
+
+	xdesc = desc->extra;
+
+	switch (xdesc->type) {
+	case IIC_PL:
+#ifdef XIIC_H
+		ret = xil_i2c_set_transmission_config(desc);
+		if (ret != 0)
+			return -1;
+
+		XIic_Send(((XIic*)xdesc->instance)->BaseAddress,
+			  desc->slave_address,
+			  data,
+			  bytes_number,
+			  stop_bit ? XIIC_STOP : XIIC_REPEATED_START);
+		break;
+#endif
+		goto error;
+	case IIC_PS:
+#ifdef XIICPS_H
+		ret = xil_i2c_set_transmission_config(desc);
+		if (ret != 0)
+			return -1;
+
+		ret = XIicPs_SetOptions(xdesc->instance,
+					stop_bit ? 0 : XIICPS_REP_START_OPTION);
+		if(ret != 0)
+			goto error;
+
+		XIicPs_MasterSend(xdesc->instance,
+				  data,
+				  bytes_number,
+				  desc->slave_address);
+		if(ret != 0)
+			goto error;
+
+		break;
+#endif
+		/* Intended fallthrough */
+error:
+	default:
+
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Read data from a slave device.
+ * @param desc - The I2C descriptor.
+ * @param data - Buffer that will store the received data.
+ * @param bytes_number - Number of bytes to read.
+ * @param stop_bit - Stop condition control.
+ *                   Example: 0 - A stop condition will not be generated;
+ *                            1 - A stop condition will be generated.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_i2c_read(struct i2c_desc *desc,
+		     uint8_t *data,
+		     uint8_t bytes_number,
+		     uint8_t stop_bit)
+{
+	struct xil_i2c_desc	*xdesc;
+	int32_t		ret;
+
+	xdesc = desc->extra;
+
+	switch (xdesc->type) {
+	case IIC_PL:
+#ifdef XIIC_H
+		ret = xil_i2c_set_transmission_config(desc);
+		if (ret != 0)
+			return -1;
+
+		ret = XIic_Recv(((XIic*)xdesc->instance)->BaseAddress,
+				desc->slave_address,
+				data,
+				bytes_number,
+				stop_bit ? XIIC_STOP : XIIC_REPEATED_START);
+		if(ret != bytes_number)
+			goto error;
+
+		break;
+#endif
+		goto error;
+	case IIC_PS:
+#ifdef XIICPS_H
+		ret = xil_i2c_set_transmission_config(desc);
+		if (ret != 0)
+			return -1;
+
+		ret = XIicPs_SetOptions(xdesc->instance,
+					stop_bit ? 0 : XIICPS_REP_START_OPTION);
+		if(ret != 0)
+			goto error;
+
+		XIicPs_MasterRecv(xdesc->instance,
+				  data,
+				  bytes_number,
+				  desc->slave_address);
+		if(ret != 0)
+			goto error;
+
+		break;
+#endif
+		/* Intended fallthrough */
+error:
+	default:
+		return -1;
+
+		break;
+	}
+
+	return 0;
+}
@@ -0,0 +1,115 @@
+/*******************************************************************************
+ *   @file   xilinx/xilinx_i2c.h
+ *   @brief  Header containing types used in the i2c driver.
+ *   @author scuciurean ([email protected])
+********************************************************************************
+ * Copyright 2019(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+#ifndef XILINX_I2C_H_
+#define XILINX_I2C_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include <stdint.h>
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+
+/**
+ * @enum xil_i2c_type
+ * @brief Xilinx platform architecture sections
+ */
+enum xil_i2c_type {
+	/** Programmable Logic */
+	IIC_PL,
+	/** Processing System */
+	IIC_PS
+};
+
+/**
+ * @struct xil_i2c_init
+ * @brief Structure holding the initialization parameters for Xilinx platform
+ * specific I2C parameters.
+ */
+struct xil_i2c_init_param {
+	/** Xilinx architecture */
+	enum xil_i2c_type	type;
+	/** Device ID */
+	uint32_t		device_id;
+};
+
+/**
+ * @struct xil_i2c_desc
+ * @brief Xilinx platform specific I2C descriptor
+ */
+struct xil_i2c_desc {
+	/** Xilinx architecture */
+	enum xil_i2c_type	type;
+	/** Device ID */
+	uint32_t		device_id;
+	/** Xilinx I2C configuration */
+	void			*config;
+	/** Xilinx I2C Instance */
+	void			*instance;
+};
+
+/**
+ * @brief Xilinx platform specific i2c platform ops structure
+ */
+extern const struct i2c_platform_ops xil_i2c_ops;
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+
+/* Initialize the I2C communication peripheral. */
+int32_t xil_i2c_init(struct i2c_desc **desc,
+		     const struct i2c_init_param *param);
+
+/* Free the resources allocated by i2c_init(). */
+int32_t xil_i2c_remove(struct i2c_desc *desc);
+
+/* I2C Write data */
+int32_t xil_i2c_write(struct i2c_desc *desc, uint8_t *data,
+		      uint8_t bytes_number, uint8_t stop_bit);
+
+/* I2C Read data. */
+int32_t xil_i2c_read(struct i2c_desc *desc, uint8_t *data,
+		     uint8_t bytes_number, uint8_t stop_bit);
+
+#endif // XILINX_I2C_H_
@@ -0,0 +1,462 @@
+/***************************************************************************//**
+ *   @file   xilinx/xilinx_spi.c
+ *   @brief  Implementation of Xilinx SPI Generic Driver.
+ *   @author Antoniu Miclaus ([email protected])
+********************************************************************************
+ * Copyright 2019(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include <stdlib.h>
+
+#include <xparameters.h>
+#ifdef XPAR_XSPI_NUM_INSTANCES
+#include <xspi.h>
+#endif
+#ifdef XPAR_XSPIPS_NUM_INSTANCES
+#include <xspips.h>
+#endif
+
+#include "error.h"
+#include "spi.h"
+#include "xilinx_spi.h"
+
+#if defined(PLATFORM_ZYNQ)
+#define SPI_CLK_FREQ_HZ(dev)	(XPAR_PS7_SPI_ ## dev ## _SPI_CLK_FREQ_HZ)
+#define SPI_NUM_INSTANCES	XPAR_XSPIPS_NUM_INSTANCES
+#elif defined(PLATFORM_ZYNQMP)
+#define SPI_CLK_FREQ_HZ(dev)	(XPAR_PSU_SPI_ ## dev ## _SPI_CLK_FREQ_HZ)
+#define SPI_NUM_INSTANCES	XPAR_XSPIPS_NUM_INSTANCES
+#else
+#define SPI_NUM_INSTANCES	0
+#endif
+
+#warning SPI delays are not supported on the xilinx platform
+
+/******************************************************************************/
+/************************ Functions Definitions *******************************/
+/******************************************************************************/
+
+/**
+ * @brief Initialize the hardware SPI peripherial
+ *
+ * @param xdesc Platform specific SPI descriptor
+ * @param xinit Platform specific SPI init param
+ * @return int32_t -1 if the device couldn't be found or configured
+ */
+static int32_t spi_init_pl(struct spi_desc *desc,
+			   const struct spi_init_param *param)
+{
+#ifdef XSPI_H
+	int32_t				ret;
+	struct xil_spi_desc 		*xdesc;
+	struct xil_spi_init_param	*xinit;
+
+	xdesc = (struct xil_spi_desc*)malloc(sizeof(struct xil_spi_desc));
+	if(!xdesc) {
+		free(xdesc);
+		return -1;
+	}
+
+	desc->extra = xdesc;
+	xinit = param->extra;
+	xdesc->type = xinit->type;
+	xdesc->flags = xinit->flags;
+
+	xdesc->instance = (XSpi*)calloc(1, sizeof(XSpi));
+	if(!xdesc->instance)
+		goto pl_error;
+
+	xdesc->config = XSpi_LookupConfig(param->device_id);
+	if(xdesc->config == NULL)
+		goto pl_error;
+
+	ret = XSpi_CfgInitialize(xdesc->instance,
+				 xdesc->config,
+				 ((XSpi_Config*)xdesc->config)
+				 ->BaseAddress);
+	if(ret != 0)
+		goto pl_error;
+
+	ret = XSpi_Initialize(xdesc->instance, param->device_id);
+	if (ret != 0)
+		goto pl_error;
+
+	ret = XSpi_SetOptions(xdesc->instance,
+			      XSP_MASTER_OPTION |
+			      ((desc->mode & SPI_CPOL) ?
+			       XSP_CLK_ACTIVE_LOW_OPTION : 0) |
+			      ((desc->mode & SPI_CPHA) ?
+			       XSP_CLK_PHASE_1_OPTION : 0));
+	if (ret != 0)
+		goto pl_error;
+
+	ret = XSpi_Start(xdesc->instance);
+	if (ret != 0)
+		goto pl_error;
+
+	XSpi_IntrGlobalDisable((XSpi *)(xdesc->instance));
+
+	return 0;
+
+pl_error:
+	free(xdesc->instance);
+	free(xdesc);
+#endif
+	return -1;
+}
+
+/**
+ * @brief Initialize the hardware SPI peripherial
+ *
+ * @param xdesc Platform specific SPI descriptor
+ * @param xinit Platform specific SPI init param
+ * @return int32_t -1 if the device couldn't be found or configured
+ */
+static int32_t spi_init_ps(struct spi_desc *desc,
+			   const struct spi_init_param *param)
+{
+#ifdef XSPIPS_H
+	int32_t				ret;
+	struct xil_spi_desc 		*xdesc;
+	struct xil_spi_init_param	*xinit;
+	const uint32_t			prescaler_default = XSPIPS_CLK_PRESCALE_64;
+	const uint32_t			prescaler_min = XSPIPS_CLK_PRESCALE_4;
+	const uint32_t			prescaler_max = XSPIPS_CLK_PRESCALE_256;
+	uint32_t			prescaler = 0u;
+	uint32_t			input_clock = 0u;
+
+	xdesc = (struct xil_spi_desc*)malloc(sizeof(struct xil_spi_desc));
+	if(!xdesc) {
+		free(xdesc);
+		return -1;
+	}
+
+	desc->extra = xdesc;
+	xinit = param->extra;
+	xdesc->type = xinit->type;
+	xdesc->flags = xinit->flags;
+
+	xdesc->instance = (XSpiPs*)malloc(sizeof(XSpiPs));
+	if(!xdesc->instance)
+		goto ps_error;
+
+	xdesc->config = XSpiPs_LookupConfig(param->device_id);
+	if(xdesc->config == NULL)
+		goto ps_error;
+
+	ret = XSpiPs_CfgInitialize(xdesc->instance,
+				   xdesc->config,
+				   ((XSpiPs_Config*)xdesc->config)
+				   ->BaseAddress);
+	if(ret != 0)
+		goto ps_error;
+
+	switch (param->device_id) {
+#if (SPI_NUM_INSTANCES >= 1)
+	case 0:
+		input_clock = SPI_CLK_FREQ_HZ(0);
+		break;
+#endif
+#if (SPI_NUM_INSTANCES >= 2)
+	case 1:
+		input_clock = SPI_CLK_FREQ_HZ(1);
+		break;
+#endif
+	default:
+		goto ps_error;
+	};
+
+	if (desc->max_speed_hz != 0u) {
+		uint32_t div = input_clock / desc->max_speed_hz;
+		uint32_t rem = input_clock % desc->max_speed_hz;
+		uint32_t po2 = !(div & (div - 1)) && !rem;
+
+		// find the power of two just higher than div and
+		// store the exponent in prescaler
+		while(div) {
+			prescaler += 1;
+			div >>= 1u;
+		}
+
+		// this exponent - 1 is needed because of the way
+		// xilinx stores it into registers
+		if (prescaler)
+			prescaler -= 1;
+
+		// this exponent - 1 is needed when initial div was
+		// precisely a power of two
+		if (prescaler && po2)
+			prescaler -= 1;
+
+		if (prescaler < prescaler_min)
+			prescaler = prescaler_min;
+
+		if (prescaler > prescaler_max)
+			prescaler = prescaler_max;
+	} else
+		prescaler = prescaler_default;
+
+	ret = XSpiPs_SetClkPrescaler(xdesc->instance, prescaler);
+
+	if(ret != 0)
+		goto ps_error;
+
+	return 0;
+
+ps_error:
+	free(xdesc->instance);
+	free(xdesc);
+#endif
+	return -1;
+}
+
+/**
+ * @brief Initialize the SPI communication peripheral.
+ * @param desc - The SPI descriptor.
+ * @param param - The structure that contains the SPI parameters.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_spi_init(struct spi_desc **desc,
+		     const struct spi_init_param *param)
+{
+	int32_t				ret;
+	enum xil_spi_type		*spi_type;
+
+	if (!param) {
+		return -1;
+	}
+
+	*desc = malloc(sizeof(**desc));
+	if(! *desc) {
+		free(*desc);
+		return -1;
+	}
+
+	spi_type = param->extra;
+
+	if(!spi_type)
+		goto init_error;
+
+	(*desc)->max_speed_hz = param->max_speed_hz;
+	(*desc)->mode = param->mode;
+	(*desc)->bit_order = param->bit_order;
+	(*desc)->chip_select = param->chip_select;
+
+	switch (*spi_type) {
+	case SPI_PL:
+		ret = spi_init_pl(*desc, param);
+		break;
+	case SPI_PS:
+		ret = spi_init_ps(*desc, param);
+		break;
+
+	default:
+		goto init_error;
+		break;
+	}
+
+	if (ret != 0) {
+init_error:
+		free(*desc);
+
+		return -1;
+	}
+
+	return ret;
+}
+
+/**
+ * @brief Free the resources allocated by spi_init().
+ * @param desc - The SPI descriptor.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_spi_remove(struct spi_desc *desc)
+{
+#ifdef XSPI_H
+	int32_t				ret;
+#endif
+	struct xil_spi_desc	*xdesc = NULL;
+	enum xil_spi_type	*spi_type;
+
+	spi_type = desc->extra;
+
+	if(!spi_type)
+		return -1;
+
+	switch (*spi_type ) {
+	case SPI_PL:
+#ifdef XSPI_H
+		xdesc = desc->extra;
+
+		if(!xdesc)
+			return -1;
+
+		ret = XSpi_Stop((XSpi *)(xdesc->instance));
+		if(ret != 0)
+			goto error;
+#endif
+		break;
+	case SPI_PS:
+#ifdef XSPIPS_H
+		xdesc = desc->extra;
+
+		if(!xdesc)
+			return -1;
+#endif
+		break;
+
+		/* Intended fallthrough */
+#ifdef XSPI_H
+error:
+#endif
+	default:
+		return -1;
+	}
+
+	if(xdesc)
+		free(xdesc->instance);
+	free(desc->extra);
+	free(desc);
+
+	return 0;
+}
+
+/**
+ * @brief Write and read data to/from SPI.
+ * @param desc - The SPI descriptor.
+ * @param data - The buffer with the transmitted/received data.
+ * @param bytes_number - Number of bytes to write/read.
+ * @return 0 in case of success, -1 otherwise.
+ */
+int32_t xil_spi_write_and_read(struct spi_desc *desc,
+			       uint8_t *data,
+			       uint16_t bytes_number)
+{
+	int32_t			ret;
+#ifdef XSPI_H
+	uint32_t		ctrl_reg;
+#endif
+	struct xil_spi_desc	*xdesc;
+	enum xil_spi_type	*spi_type;
+
+	ret = -1;
+
+	spi_type = desc->extra;
+
+	if(!spi_type)
+		return -1;
+
+	xdesc = desc->extra;
+
+	switch (*spi_type) {
+	case SPI_PL:
+#ifdef XSPI_H
+		ret = XSpi_SetOptions(xdesc->instance,
+				      XSP_MASTER_OPTION |
+				      ((desc->mode & SPI_CPOL) ?
+				       XSP_CLK_ACTIVE_LOW_OPTION : 0) |
+				      ((desc->mode & SPI_CPHA) ?
+				       XSP_CLK_PHASE_1_OPTION : 0));
+		if (ret != 0)
+			goto error;
+
+		ctrl_reg = XSpi_GetControlReg(((XSpi*)xdesc->instance));
+		if (desc->bit_order == SPI_BIT_ORDER_LSB_FIRST)
+			ctrl_reg |= XSP_CR_LSB_MSB_FIRST_MASK;
+		else
+			ctrl_reg &= ~ XSP_CR_LSB_MSB_FIRST_MASK;
+		XSpi_SetControlReg(((XSpi*)xdesc->instance), ctrl_reg);
+
+		ret = XSpi_SetSlaveSelect(xdesc->instance,
+					  0x01 << desc->chip_select);
+		if (ret != 0)
+			goto error;
+
+		ret = XSpi_Transfer(xdesc->instance,
+				    data,
+				    data,
+				    bytes_number);
+		if (ret != 0)
+			goto error;
+#endif
+		break;
+	case SPI_PS:
+#ifdef XSPIPS_H
+		ret = XSpiPs_SetOptions(xdesc->instance,
+					XSPIPS_MASTER_OPTION |
+					((xdesc->flags & SPI_CS_DECODE) ?
+					 XSPIPS_DECODE_SSELECT_OPTION : 0) |
+					XSPIPS_FORCE_SSELECT_OPTION |
+					((desc->mode & SPI_CPOL) ?
+					 XSPIPS_CLK_ACTIVE_LOW_OPTION : 0) |
+					((desc->mode & SPI_CPHA) ?
+					 XSPIPS_CLK_PHASE_1_OPTION : 0));
+		if (ret != 0)
+			goto error;
+
+		ret = XSpiPs_SetSlaveSelect(xdesc->instance,
+					    desc->chip_select);
+		if (ret != 0)
+			goto error;
+		ret = XSpiPs_PolledTransfer(xdesc->instance,
+					    data,
+					    data,
+					    bytes_number);
+		if (ret != 0)
+			goto error;
+		ret = XSpiPs_SetSlaveSelect(xdesc->instance, SPI_DEASSERT_CURRENT_SS);
+		if (ret != 0)
+			goto error;
+#endif
+		break;
+error:
+	default:
+		return -1;
+	}
+
+	return ret;
+}
+
+/**
+ * @brief Xilinx platform specific SPI platform ops structure
+ */
+const struct spi_platform_ops xil_spi_ops = {
+	.init = &xil_spi_init,
+	.write_and_read = &xil_spi_write_and_read,
+	.remove = &xil_spi_remove
+};
@@ -0,0 +1,115 @@
+/*******************************************************************************
+ *   @file   xilinx/xilinx_spi.h
+ *   @brief  Header containing extra types used in the spi driver.
+ *   @author scuciurean ([email protected])
+********************************************************************************
+ * Copyright 2019(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+#ifndef XILINX_SPI_H_
+#define XILINX_SPI_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include <stdint.h>
+#include "spi.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+
+#define SPI_CS_DECODE			0x01
+#define SPI_DEASSERT_CURRENT_SS	0x0F
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+
+/**
+ * @enum xil_spi_type
+ * @brief Xilinx platform architecture sections
+ */
+enum xil_spi_type {
+	/** Programmable Logic */
+	SPI_PL,
+	/** Processing System */
+	SPI_PS,
+	/** SPI Engine */
+	SPI_ENGINE
+};
+
+/**
+ * @struct xil_spi_init_param
+ * @brief Structure holding the initialization parameters for Xilinx platform
+ * specific SPI parameters when using xil_spi_ops.
+ */
+struct xil_spi_init_param {
+	/** Xilinx architecture */
+	enum xil_spi_type	type;
+	/** SPI flags */
+	uint32_t		flags;
+};
+
+/**
+ * @struct xil_spi_desc
+ * @brief Xilinx platform specific SPI descriptor
+ */
+struct xil_spi_desc {
+	/** Xilinx architecture */
+	enum xil_spi_type	type;
+	/** SPI flags */
+	uint32_t		flags;
+	/** SPI configuration */
+	void			*config;
+	/** SPI instance */
+	void			*instance;
+};
+
+/**
+ * @brief SPI engine platform ops structure
+ */
+extern const struct spi_platform_ops spi_eng_platform_ops;
+
+/**
+ * @brief Xilinx specific SPI platform ops structure
+ */
+extern const struct spi_platform_ops xil_spi_ops;
+
+/**
+ * @brief Xilinx SPI PS register functions. No extra param needed
+ */
+extern const struct spi_platform_ops xil_spi_pl_ops;
+
+#endif // XILINX_SPI_H_
@@ -0,0 +1,533 @@
+/*******************************************************************************
+ *   @file   xilinx/xilinx_spi_pl.c
+ *   @brief  Driver for spi pl device using registers
+ *   @author Mihail Chindris ([email protected])
+********************************************************************************
+ * Copyright 2021(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+#include <xparameters.h>
+
+#ifdef XPAR_XSPI_NUM_INSTANCES
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include <xspi.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include "spi.h"
+#include "error.h"
+#include "delay.h"
+#include "util.h"
+#include "alloc.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+
+#define XPS_TYPE_WRITE		0x1
+#define XPS_TYPE_READ		0x2
+#define XSP_DEFAULT_SR_VALUE	0x25
+#define XSP_DUMMY_DATA		0xFF
+
+/*
+ * Used to store current spi device configuration in order to not update it for
+ * each spi transaction if not needed.
+ */
+static struct spi_desc g_spi_desc[XPAR_XSPI_NUM_INSTANCES];
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+
+/* Xilinx PL spi specific data */
+struct xspi_desc {
+	uint32_t base_addr;
+	uint32_t disable_slaves_mask;
+	uint32_t fifo_depth;
+	uint8_t  cs_asserted;
+};
+
+/* Structure used to iterate over SPI messages */
+struct msg_iter {
+	struct spi_msg	*msgs;
+	uint32_t	len;
+	uint32_t	i;
+	uint32_t	buff_i;
+	uint8_t		is_wr;
+};
+
+/******************************************************************************/
+/************************ Functions Definitions *******************************/
+/******************************************************************************/
+
+/* Read device register */
+static inline uint32_t _read(struct xspi_desc *xdesc, uint32_t reg)
+{
+	return Xil_In32(xdesc->base_addr + reg);
+}
+
+/* Write device register */
+static inline void _write(struct xspi_desc *xdesc, uint32_t reg, uint32_t val)
+{
+	Xil_Out32(xdesc->base_addr + reg, val);
+}
+
+/* Update device register. Only bits set to 1 in mask will be modified */
+static inline void _wr_mask(struct xspi_desc *xdesc, uint32_t reg,
+			    uint32_t val, uint32_t mask)
+{
+	uint32_t tmp;
+
+	tmp = _read(xdesc, reg);
+	tmp &= ~mask;
+	tmp |= val & mask;
+	_write(xdesc, reg, tmp);
+}
+
+/* Update spi device configuration if needed */
+static void _update_mode(struct spi_desc *desc)
+{
+	uint32_t		val;
+	uint32_t		mask;
+
+	if (desc->mode == g_spi_desc[desc->device_id].mode &&
+	    desc->bit_order == g_spi_desc[desc->device_id].bit_order)
+		return ;
+
+	/* Update mode */
+	val = desc->mode | SPI_CPOL ? XSP_CR_CLK_POLARITY_MASK : 0;
+	val |= desc->mode | SPI_CPHA ? XSP_CR_CLK_PHASE_MASK : 0;
+	mask = XSP_CR_CLK_POLARITY_MASK | XSP_CR_CLK_PHASE_MASK;
+
+	val |= desc->bit_order == SPI_BIT_ORDER_LSB_FIRST ?
+	       XSP_CR_LSB_MSB_FIRST_MASK : 0;
+	mask |= XSP_CR_LSB_MSB_FIRST_MASK;
+
+	_wr_mask(desc->extra, XSP_CR_OFFSET, val, mask);
+	g_spi_desc[desc->device_id] = *desc;
+}
+
+/* Configure SPI PL device */
+static int32_t _xil_spi_init_dev(struct xspi_desc *xdesc)
+{
+	uint32_t val;
+
+	/* Software reset */
+	_write(xdesc, XSP_SRR_OFFSET, XSP_SRR_RESET_MASK);
+	mdelay(1);
+
+	/* Check if success reset */
+	val = _read(xdesc, XSP_SR_OFFSET);
+	if (val != XSP_DEFAULT_SR_VALUE)
+		return -ENODEV;
+
+	/* Disable interrupts. Drivers only works with pooled mode */
+	_write(xdesc, XSP_IIER_OFFSET, 0);
+
+	/* Deasert chip selects */
+	_write(xdesc, XSP_SSR_OFFSET, 0xFFFFFFFF);
+
+	/* Get fifo depth */
+	while (!(_read(xdesc, XSP_SR_OFFSET) & XSP_SR_TX_FULL_MASK))
+		_write(xdesc, XSP_DTR_OFFSET, XSP_DUMMY_DATA);
+	xdesc->fifo_depth = _read(xdesc, XSP_TFO_OFFSET) + 1;
+
+	/* Configure spi device */
+	val = XSP_CR_ENABLE_MASK |
+	      XSP_CR_MANUAL_SS_MASK |
+	      XSP_CR_TXFIFO_RESET_MASK |
+	      XSP_CR_RXFIFO_RESET_MASK |
+	      XSP_CR_MASTER_MODE_MASK |
+	      XSP_CR_TRANS_INHIBIT_MASK;
+
+	_write(xdesc, XSP_CR_OFFSET, val);
+
+	return 0;
+}
+
+/* Initialize spi_desc structure and device */
+static int32_t xil_spi_init_pl(struct spi_desc **desc,
+			       const struct spi_init_param *param)
+{
+	struct spi_desc		*ldesc;
+	struct xspi_desc	*xdesc;
+	int32_t			err;
+	XSpi_Config		*cfg;
+
+	if (!desc || !param || param->device_id >= XPAR_XSPI_NUM_INSTANCES)
+		return -EINVAL;
+
+	cfg = XSpi_LookupConfig(param->device_id);
+	if (!cfg)
+		return -EINVAL;
+
+	if (param->chip_select > cfg->NumSlaveBits)
+		return -EINVAL;
+
+	ldesc = (struct spi_desc *)calloc(1, sizeof(*ldesc));
+	if (!ldesc)
+		return -ENOMEM;
+
+	xdesc = (struct xspi_desc *)calloc(1, sizeof(*xdesc));
+	if (!xdesc) {
+		err = -ENOMEM;
+		goto error;
+	}
+
+	ldesc->bit_order = param->bit_order;
+	ldesc->chip_select = param->chip_select;
+	ldesc->mode = param->mode;
+	xdesc->base_addr = cfg->BaseAddress;
+	xdesc->disable_slaves_mask = (1 << cfg->NumSlaveBits) - 1;
+	xdesc->cs_asserted = 0;
+
+	err = _xil_spi_init_dev(xdesc);
+	if (IS_ERR_VALUE(err))
+		goto error;
+
+	ldesc->extra = xdesc;
+	*desc = ldesc;
+
+	return 0;
+
+error:
+	free(xdesc);
+	free(ldesc);
+
+	return err;
+}
+
+/* Remove allocated resources */
+static int32_t xil_spi_remove_pl(struct spi_desc *desc)
+{
+	if (!desc)
+		return -EINVAL;
+
+	free(desc->extra);
+	free(desc);
+
+	return 0;
+}
+
+/*
+ * Fill fifo until fifo is full or no more data available.
+ * Return the number of written bytes.
+ */
+static uint32_t _wr_fifo(struct xspi_desc *xdesc, uint8_t *data,
+			 uint32_t len)
+{
+	uint32_t i;
+	uint32_t to_write;
+	uint32_t tx_available;
+
+	tx_available = xdesc->fifo_depth - _read(xdesc, XSP_TFO_OFFSET);
+	to_write = min(tx_available, len);
+	for (i = 0; i < to_write; ++i)
+		if (data)
+			_write(xdesc, XSP_DTR_OFFSET, data[i]);
+		else
+			_write(xdesc, XSP_DTR_OFFSET, XSP_DUMMY_DATA);
+
+	return to_write;
+}
+
+/*
+ * Read fifo until fifo is empty or no more buffer available to read into
+ * Returns the number of read bytes
+ */
+static uint32_t _rd_fifo(struct xspi_desc *xdesc, uint8_t *data,
+			 uint32_t len)
+{
+	uint32_t rx_available;
+	uint32_t to_read;
+	uint32_t tmp;
+	uint32_t i;
+
+	tmp = _read(xdesc, XSP_SR_OFFSET);
+	if (tmp & XSP_SR_RX_EMPTY_MASK)
+		return 0;
+
+	rx_available = _read(xdesc, XSP_RFO_OFFSET) + 1;
+	to_read = min(rx_available, len);
+	for (i = 0; i < to_read; ++i) {
+		tmp = _read(xdesc, XSP_DRR_OFFSET);
+		if (data)
+			data[i] = tmp;
+	}
+
+	return to_read;
+}
+
+/* If start is 0 stop transfer, else start it.
+ * CS will be asserted if needed. If different CS othere than the one needed
+ * is asserted. Deassert it and assert correct one */
+static void _xil_spi_start_transfer(struct spi_desc *desc, uint8_t start)
+{
+	struct xspi_desc	*xdesc;
+
+	xdesc = desc->extra;
+	if (start) {
+		if (xdesc->cs_asserted) {
+			if (desc->chip_select ==
+			    g_spi_desc[desc->device_id].chip_select)
+				return ;
+			else
+				/* Stop transfer to start again with new CS */
+				_xil_spi_start_transfer(desc, 0);
+		}
+		_write(xdesc, XSP_SSR_OFFSET, ~(1 << desc->chip_select));
+		_wr_mask(xdesc, XSP_CR_OFFSET, 0, XSP_CR_TRANS_INHIBIT_MASK);
+	} else {
+		_wr_mask(xdesc, XSP_CR_OFFSET, XSP_CR_TRANS_INHIBIT_MASK,
+			 XSP_CR_TRANS_INHIBIT_MASK);
+		_write(xdesc, XSP_SSR_OFFSET, xdesc->disable_slaves_mask);
+	}
+	xdesc->cs_asserted = start;
+}
+
+
+/* SPI polled transfer */
+static int32_t xil_spi_write_and_read_pl(struct spi_desc *desc,
+		uint8_t *data,
+		uint16_t bytes_number)
+{
+	struct xspi_desc	*xdesc;
+	uint32_t		rx;
+	uint32_t		tx;
+
+	if (!desc || !desc->extra)
+		return -EINVAL;
+
+	xdesc = desc->extra;
+	_update_mode(desc);
+
+	_xil_spi_start_transfer(desc, 1);
+	rx = 0;
+	tx = 0;
+	while (rx < bytes_number) {
+		if (tx < bytes_number)
+			tx += _wr_fifo(xdesc, data + tx, bytes_number - tx);
+		rx += _rd_fifo(xdesc, data + rx, bytes_number - rx);
+	}
+	_xil_spi_start_transfer(desc, 0);
+
+	return 0;
+}
+
+/* Get type of message. It can be READ, WRITE or both */
+static uint32_t _get_msg_type(struct spi_msg *msg)
+{
+	uint32_t	type;
+
+	type = 0;
+	if (msg->tx_buff)
+		type |= XPS_TYPE_WRITE;
+	if (msg->rx_buff)
+		type |= XPS_TYPE_READ;
+
+	return type;
+}
+
+/* Get information based on current iterator position */
+static void _get_data(struct msg_iter *it, uint8_t **buff, uint32_t *len,
+		      uint32_t *type)
+{
+	struct spi_msg *msg;
+
+	if (it->i == it->len) {
+		*len = 0;
+		return ;
+	}
+
+	msg = it->msgs + it->i;
+	if (it->is_wr)
+		*buff = msg->tx_buff;
+	else
+		*buff = msg->rx_buff;
+
+	if (*buff)
+		*buff += it->buff_i;
+
+	*len = msg->bytes_number - it->buff_i;
+	if (type)
+		*type = _get_msg_type(msg);
+}
+
+/*
+ * Increment iterator position with desired length.
+ * If the new position has a different message type, new_type will be set to 1
+ * If a CS change is needed, cs_change is set
+ */
+static void _increment_iter(struct msg_iter *it, uint32_t len,
+			    uint8_t *cs_change, uint8_t *new_type)
+{
+	struct spi_msg	*msg;
+	uint32_t	type;
+	uint32_t	extra_len;
+
+	if (!len)
+		return ;
+
+	*cs_change = 0;
+	*new_type = 0;
+	msg = it->msgs + it->i;
+	if (it->buff_i + len > msg->bytes_number)
+		extra_len = it->buff_i + len - msg->bytes_number;
+	else
+		extra_len = 0;
+	len -= extra_len;
+	it->buff_i += len;
+	if (it->buff_i == msg->bytes_number) {
+		type = _get_msg_type(msg);
+		++it->i;
+		it->buff_i = 0;
+		if (cs_change && msg->cs_change)
+			*cs_change = 1;
+		if (new_type)
+			if (it->i == it->len ||
+			    type != _get_msg_type(it->msgs + it->i))
+				*new_type = 1;
+	}
+	if (extra_len)
+		_increment_iter(it, extra_len, cs_change, new_type);
+}
+
+/*
+ * SPI polling transfer of multiple messages.
+ */
+static int32_t xil_spi_transfer_pl(struct spi_desc *desc,
+				   struct spi_msg *msgs,
+				   uint32_t len)
+
+{
+	struct xspi_desc	*xdesc;
+	uint8_t			cs_change;
+	uint8_t			new_type;
+	struct msg_iter		rx = {.msgs = msgs, .len = len, .is_wr = 0};
+	struct msg_iter		tx = {.msgs = msgs, .len = len, .is_wr = 1};
+	uint8_t			*buff;
+	uint32_t		bytes;
+	uint32_t		type;
+	/* Bytes to increment rx when only a write transaction is executed */
+	uint32_t		to_inc_rx;
+	/* Difference between rx and tx iterators in bytes */
+	uint32_t		tx_advance;
+	/* Save bytes sent during a write loop */
+	uint32_t		tx_sent;
+	/* Used to loop if need to empty the RX FIFO */
+	uint32_t		loop;
+
+	if (!desc || !desc->extra)
+		return -EINVAL;
+
+	xdesc = desc->extra;
+	_update_mode(desc);
+
+	tx_advance = 0;
+	to_inc_rx = 0;
+	buff = NULL;
+	type = 0;
+	do {
+		_xil_spi_start_transfer(desc, 1);
+
+		tx_sent = 0;
+		/* Writing loop */
+		do {
+			_get_data(&tx, &buff, &bytes, &type);
+			if (type & XPS_TYPE_READ)
+				/*
+				 * Do not write more bytes than fifo_depth if
+				 * they haven't been read.
+				 */
+				bytes = min(bytes,
+						  xdesc->fifo_depth - tx_advance);
+			bytes = _wr_fifo(xdesc, buff, bytes);
+			tx_sent += bytes;
+			_increment_iter(&tx, bytes, &cs_change, &new_type);
+			tx_advance += bytes;
+		} while (!cs_change && !new_type && bytes);
+
+		if (type & XPS_TYPE_READ) {
+			loop = 1;
+			/*
+			 * Loop only when no more data to write otherwise read
+			 * only available data.
+			 */
+			while (loop) {
+				if (!new_type)
+					loop = 0;
+				_get_data(&rx, &buff, &bytes, NULL);
+				bytes = _rd_fifo(xdesc, buff, bytes);
+				_increment_iter(&rx, bytes, &cs_change, &new_type);
+				tx_advance -= bytes;
+				if (loop && new_type)
+					break;
+			}
+		} else {
+			/* Clean RX FIFO if it was only a WRITE message */
+			to_inc_rx += tx_sent;
+			if (new_type) {
+				/* Wait for TX to be sent */
+				while (!(_read(xdesc, XSP_SR_OFFSET) &
+					 XSP_SR_TX_EMPTY_MASK))
+					;
+				/* Reset fifo. Only write was performed */
+				_wr_mask(xdesc, XSP_CR_OFFSET,
+					 XSP_CR_RXFIFO_RESET_MASK,
+					 XSP_CR_RXFIFO_RESET_MASK);
+
+				_increment_iter(&rx, to_inc_rx, NULL, NULL);
+				tx_advance -= to_inc_rx;
+				to_inc_rx = 0;
+			}
+		}
+
+		if ((cs_change && rx.i != len) || (!cs_change && rx.i == len))
+			_xil_spi_start_transfer(desc, 0);
+	} while (rx.i < len);
+
+	return 0;
+}
+
+const struct spi_platform_ops xil_spi_pl_ops = {
+	.init = xil_spi_init_pl,
+	.remove = xil_spi_remove_pl,
+	.write_and_read = xil_spi_write_and_read_pl,
+	.transfer = xil_spi_transfer_pl
+};
+
+#endif // XPAR_XSPI_NUM_INSTANCES
@@ -0,0 +1,552 @@
+/***************************************************************************//**
+ *   @file   ad9361_api.h
+ *   @brief  Header file of AD9361 API Driver.
+ *   @author DBogdan (dragos.bogdan@analog.com)
+********************************************************************************
+ * Copyright 2013(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+#ifndef AD9361_API_H_
+#define AD9361_API_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include "ad9361_util.h"
+#include "gpio.h"
+#include "spi.h"
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+typedef struct {
+	/* Device selection */
+	enum dev_id	dev_sel;
+	/* Reference Clock */
+	uint32_t	reference_clk_rate;
+	/* Base Configuration */
+	uint8_t		two_rx_two_tx_mode_enable;	/* adi,2rx-2tx-mode-enable */
+	uint8_t		one_rx_one_tx_mode_use_rx_num;	/* adi,1rx-1tx-mode-use-rx-num */
+	uint8_t		one_rx_one_tx_mode_use_tx_num;	/* adi,1rx-1tx-mode-use-tx-num */
+	uint8_t		frequency_division_duplex_mode_enable;	/* adi,frequency-division-duplex-mode-enable */
+	uint8_t		frequency_division_duplex_independent_mode_enable;	/* adi,frequency-division-duplex-independent-mode-enable */
+	uint8_t		tdd_use_dual_synth_mode_enable;	/* adi,tdd-use-dual-synth-mode-enable */
+	uint8_t		tdd_skip_vco_cal_enable;		/* adi,tdd-skip-vco-cal-enable */
+	uint32_t	tx_fastlock_delay_ns;	/* adi,tx-fastlock-delay-ns */
+	uint32_t	rx_fastlock_delay_ns;	/* adi,rx-fastlock-delay-ns */
+	uint8_t		rx_fastlock_pincontrol_enable;	/* adi,rx-fastlock-pincontrol-enable */
+	uint8_t		tx_fastlock_pincontrol_enable;	/* adi,tx-fastlock-pincontrol-enable */
+	uint8_t		external_rx_lo_enable;	/* adi,external-rx-lo-enable */
+	uint8_t		external_tx_lo_enable;	/* adi,external-tx-lo-enable */
+	uint8_t		dc_offset_tracking_update_event_mask;	/* adi,dc-offset-tracking-update-event-mask */
+	uint8_t		dc_offset_attenuation_high_range;	/* adi,dc-offset-attenuation-high-range */
+	uint8_t		dc_offset_attenuation_low_range;	/* adi,dc-offset-attenuation-low-range */
+	uint8_t		dc_offset_count_high_range;			/* adi,dc-offset-count-high-range */
+	uint8_t		dc_offset_count_low_range;			/* adi,dc-offset-count-low-range */
+	uint8_t		split_gain_table_mode_enable;	/* adi,split-gain-table-mode-enable */
+	uint32_t	trx_synthesizer_target_fref_overwrite_hz;	/* adi,trx-synthesizer-target-fref-overwrite-hz */
+	uint8_t		qec_tracking_slow_mode_enable;	/* adi,qec-tracking-slow-mode-enable */
+	/* ENSM Control */
+	uint8_t		ensm_enable_pin_pulse_mode_enable;	/* adi,ensm-enable-pin-pulse-mode-enable */
+	uint8_t		ensm_enable_txnrx_control_enable;	/* adi,ensm-enable-txnrx-control-enable */
+	/* LO Control */
+	uint64_t	rx_synthesizer_frequency_hz;	/* adi,rx-synthesizer-frequency-hz */
+	uint64_t	tx_synthesizer_frequency_hz;	/* adi,tx-synthesizer-frequency-hz */
+	uint8_t		tx_lo_powerdown_managed_enable;	/* adi,tx-lo-powerdown-managed-enable */
+	/* Rate & BW Control */
+	uint32_t	rx_path_clock_frequencies[6];	/* adi,rx-path-clock-frequencies */
+	uint32_t	tx_path_clock_frequencies[6];	/* adi,tx-path-clock-frequencies */
+	uint32_t	rf_rx_bandwidth_hz;	/* adi,rf-rx-bandwidth-hz */
+	uint32_t	rf_tx_bandwidth_hz;	/* adi,rf-tx-bandwidth-hz */
+	/* RF Port Control */
+	uint32_t	rx_rf_port_input_select;	/* adi,rx-rf-port-input-select */
+	uint32_t	tx_rf_port_input_select;	/* adi,tx-rf-port-input-select */
+	/* TX Attenuation Control */
+	int32_t		tx_attenuation_mdB;	/* adi,tx-attenuation-mdB */
+	uint8_t		update_tx_gain_in_alert_enable;	/* adi,update-tx-gain-in-alert-enable */
+	/* Reference Clock Control */
+	uint8_t		xo_disable_use_ext_refclk_enable;	/* adi,xo-disable-use-ext-refclk-enable */
+	uint32_t	dcxo_coarse_and_fine_tune[2];	/* adi,dcxo-coarse-and-fine-tune */
+	uint32_t	clk_output_mode_select;		/* adi,clk-output-mode-select */
+	/* Gain Control */
+	uint8_t		gc_rx1_mode;	/* adi,gc-rx1-mode */
+	uint8_t		gc_rx2_mode;	/* adi,gc-rx2-mode */
+	uint8_t		gc_adc_large_overload_thresh;	/* adi,gc-adc-large-overload-thresh */
+	uint8_t		gc_adc_ovr_sample_size;	/* adi,gc-adc-ovr-sample-size */
+	uint8_t		gc_adc_small_overload_thresh;	/* adi,gc-adc-small-overload-thresh */
+	uint16_t	gc_dec_pow_measurement_duration;	/* adi,gc-dec-pow-measurement-duration */
+	uint8_t		gc_dig_gain_enable;	/* adi,gc-dig-gain-enable */
+	uint16_t	gc_lmt_overload_high_thresh;	/* adi,gc-lmt-overload-high-thresh */
+	uint16_t	gc_lmt_overload_low_thresh;	/* adi,gc-lmt-overload-low-thresh */
+	uint8_t		gc_low_power_thresh;	/* adi,gc-low-power-thresh */
+	uint8_t		gc_max_dig_gain;	/* adi,gc-max-dig-gain */
+	uint8_t		gc_use_rx_fir_out_for_dec_pwr_meas_enable;	/* adi,gc-use-rx-fir-out-for-dec-pwr-meas-enable */
+	/* Gain MGC Control */
+	uint8_t		mgc_dec_gain_step;	/* adi,mgc-dec-gain-step */
+	uint8_t		mgc_inc_gain_step;	/* adi,mgc-inc-gain-step */
+	uint8_t		mgc_rx1_ctrl_inp_enable;	/* adi,mgc-rx1-ctrl-inp-enable */
+	uint8_t		mgc_rx2_ctrl_inp_enable;	/* adi,mgc-rx2-ctrl-inp-enable */
+	uint8_t		mgc_split_table_ctrl_inp_gain_mode;	/* adi,mgc-split-table-ctrl-inp-gain-mode */
+	/* Gain AGC Control */
+	uint8_t		agc_adc_large_overload_exceed_counter;	/* adi,agc-adc-large-overload-exceed-counter */
+	uint8_t		agc_adc_large_overload_inc_steps;	/* adi,agc-adc-large-overload-inc-steps - Name is misleading should be dec-steps*/
+	uint8_t		agc_adc_lmt_small_overload_prevent_gain_inc_enable;	/* adi,agc-adc-lmt-small-overload-prevent-gain-inc-enable */
+	uint8_t		agc_adc_small_overload_exceed_counter;	/* adi,agc-adc-small-overload-exceed-counter */
+	uint8_t		agc_dig_gain_step_size;	/* adi,agc-dig-gain-step-size */
+	uint8_t		agc_dig_saturation_exceed_counter;	/* adi,agc-dig-saturation-exceed-counter */
+	uint32_t	agc_gain_update_interval_us; /* adi,agc-gain-update-interval-us */
+	uint8_t		agc_immed_gain_change_if_large_adc_overload_enable;	/* adi,agc-immed-gain-change-if-large-adc-overload-enable */
+	uint8_t		agc_immed_gain_change_if_large_lmt_overload_enable;	/* adi,agc-immed-gain-change-if-large-lmt-overload-enable */
+	uint8_t		agc_inner_thresh_high;	/* adi,agc-inner-thresh-high */
+	uint8_t		agc_inner_thresh_high_dec_steps;	/* adi,agc-inner-thresh-high-dec-steps */
+	uint8_t		agc_inner_thresh_low;	/* adi,agc-inner-thresh-low */
+	uint8_t		agc_inner_thresh_low_inc_steps;	/* adi,agc-inner-thresh-low-inc-steps */
+	uint8_t		agc_lmt_overload_large_exceed_counter;	/* adi,agc-lmt-overload-large-exceed-counter */
+	uint8_t		agc_lmt_overload_large_inc_steps;	/* adi,agc-lmt-overload-large-inc-steps */
+	uint8_t		agc_lmt_overload_small_exceed_counter;	/* adi,agc-lmt-overload-small-exceed-counter */
+	uint8_t		agc_outer_thresh_high;	/* adi,agc-outer-thresh-high */
+	uint8_t		agc_outer_thresh_high_dec_steps;	/* adi,agc-outer-thresh-high-dec-steps */
+	uint8_t		agc_outer_thresh_low;	/* adi,agc-outer-thresh-low */
+	uint8_t		agc_outer_thresh_low_inc_steps;	/* adi,agc-outer-thresh-low-inc-steps */
+	uint32_t	agc_attack_delay_extra_margin_us;	/* adi,agc-attack-delay-extra-margin-us */
+	uint8_t		agc_sync_for_gain_counter_enable;	/* adi,agc-sync-for-gain-counter-enable */
+	/* Fast AGC */
+	uint32_t	fagc_dec_pow_measuremnt_duration;	/* adi,fagc-dec-pow-measurement-duration */
+	uint32_t	fagc_state_wait_time_ns;	/* adi,fagc-state-wait-time-ns */
+	/* Fast AGC - Low Power */
+	uint8_t		fagc_allow_agc_gain_increase;	/* adi,fagc-allow-agc-gain-increase-enable */
+	uint32_t	fagc_lp_thresh_increment_time;	/* adi,fagc-lp-thresh-increment-time */
+	uint32_t	fagc_lp_thresh_increment_steps;	/* adi,fagc-lp-thresh-increment-steps */
+	/* Fast AGC - Lock Level (Lock Level is set via slow AGC inner high threshold) */
+	uint8_t		fagc_lock_level_lmt_gain_increase_en;	/* adi,fagc-lock-level-lmt-gain-increase-enable */
+	uint32_t	fagc_lock_level_gain_increase_upper_limit;	/* adi,fagc-lock-level-gain-increase-upper-limit */
+	/* Fast AGC - Peak Detectors and Final Settling */
+	uint32_t	fagc_lpf_final_settling_steps;	/* adi,fagc-lpf-final-settling-steps */
+	uint32_t	fagc_lmt_final_settling_steps;	/* adi,fagc-lmt-final-settling-steps */
+	uint32_t	fagc_final_overrange_count;	/* adi,fagc-final-overrange-count */
+	/* Fast AGC - Final Power Test */
+	uint8_t		fagc_gain_increase_after_gain_lock_en;	/* adi,fagc-gain-increase-after-gain-lock-enable */
+	/* Fast AGC - Unlocking the Gain */
+	uint32_t	fagc_gain_index_type_after_exit_rx_mode;	/* adi,fagc-gain-index-type-after-exit-rx-mode */
+	uint8_t		fagc_use_last_lock_level_for_set_gain_en;	/* adi,fagc-use-last-lock-level-for-set-gain-enable */
+	uint8_t		fagc_rst_gla_stronger_sig_thresh_exceeded_en;	/* adi,fagc-rst-gla-stronger-sig-thresh-exceeded-enable */
+	uint32_t	fagc_optimized_gain_offset;	/* adi,fagc-optimized-gain-offset */
+	uint32_t	fagc_rst_gla_stronger_sig_thresh_above_ll;	/* adi,fagc-rst-gla-stronger-sig-thresh-above-ll */
+	uint8_t		fagc_rst_gla_engergy_lost_sig_thresh_exceeded_en;	/* adi,fagc-rst-gla-engergy-lost-sig-thresh-exceeded-enable */
+	uint8_t		fagc_rst_gla_engergy_lost_goto_optim_gain_en;	/* adi,fagc-rst-gla-engergy-lost-goto-optim-gain-enable */
+	uint32_t	fagc_rst_gla_engergy_lost_sig_thresh_below_ll;	/* adi,fagc-rst-gla-engergy-lost-sig-thresh-below-ll */
+	uint32_t	fagc_energy_lost_stronger_sig_gain_lock_exit_cnt;	/* adi,fagc-energy-lost-stronger-sig-gain-lock-exit-cnt */
+	uint8_t		fagc_rst_gla_large_adc_overload_en;	/* adi,fagc-rst-gla-large-adc-overload-enable */
+	uint8_t		fagc_rst_gla_large_lmt_overload_en;	/* adi,fagc-rst-gla-large-lmt-overload-enable */
+	uint8_t		fagc_rst_gla_en_agc_pulled_high_en;	/* adi,fagc-rst-gla-en-agc-pulled-high-enable */
+	uint32_t	fagc_rst_gla_if_en_agc_pulled_high_mode;	/* adi,fagc-rst-gla-if-en-agc-pulled-high-mode */
+	uint32_t	fagc_power_measurement_duration_in_state5;	/* adi,fagc-power-measurement-duration-in-state5 */
+	uint32_t	fagc_large_overload_inc_steps;	/* adi,fagc-adc-large-overload-inc-steps - Name is misleading should be dec-steps */
+	/* RSSI Control */
+	uint32_t	rssi_delay;	/* adi,rssi-delay */
+	uint32_t	rssi_duration;	/* adi,rssi-duration */
+	uint8_t		rssi_restart_mode;	/* adi,rssi-restart-mode */
+	uint8_t		rssi_unit_is_rx_samples_enable;	/* adi,rssi-unit-is-rx-samples-enable */
+	uint32_t	rssi_wait;	/* adi,rssi-wait */
+	/* Aux ADC Control */
+	uint32_t	aux_adc_decimation;	/* adi,aux-adc-decimation */
+	uint32_t	aux_adc_rate;	/* adi,aux-adc-rate */
+	/* AuxDAC Control */
+	uint8_t		aux_dac_manual_mode_enable;	/* adi,aux-dac-manual-mode-enable */
+	uint32_t	aux_dac1_default_value_mV;	/* adi,aux-dac1-default-value-mV */
+	uint8_t		aux_dac1_active_in_rx_enable;	/* adi,aux-dac1-active-in-rx-enable */
+	uint8_t		aux_dac1_active_in_tx_enable;	/* adi,aux-dac1-active-in-tx-enable */
+	uint8_t		aux_dac1_active_in_alert_enable;	/* adi,aux-dac1-active-in-alert-enable */
+	uint32_t	aux_dac1_rx_delay_us;	/* adi,aux-dac1-rx-delay-us */
+	uint32_t	aux_dac1_tx_delay_us;	/* adi,aux-dac1-tx-delay-us */
+	uint32_t	aux_dac2_default_value_mV;	/* adi,aux-dac2-default-value-mV */
+	uint8_t		aux_dac2_active_in_rx_enable;	/* adi,aux-dac2-active-in-rx-enable */
+	uint8_t		aux_dac2_active_in_tx_enable;	/* adi,aux-dac2-active-in-tx-enable */
+	uint8_t		aux_dac2_active_in_alert_enable;	/* adi,aux-dac2-active-in-alert-enable */
+	uint32_t	aux_dac2_rx_delay_us;	/* adi,aux-dac2-rx-delay-us */
+	uint32_t	aux_dac2_tx_delay_us;	/* adi,aux-dac2-tx-delay-us */
+	/* Temperature Sensor Control */
+	uint32_t	temp_sense_decimation;	/* adi,temp-sense-decimation */
+	uint16_t	temp_sense_measurement_interval_ms;	/* adi,temp-sense-measurement-interval-ms */
+	int8_t		temp_sense_offset_signed;	/* adi,temp-sense-offset-signed */
+	uint8_t		temp_sense_periodic_measurement_enable;	/* adi,temp-sense-periodic-measurement-enable */
+	/* Control Out Setup */
+	uint8_t		ctrl_outs_enable_mask;	/* adi,ctrl-outs-enable-mask */
+	uint8_t		ctrl_outs_index;	/* adi,ctrl-outs-index */
+	/* External LNA Control */
+	uint32_t	elna_settling_delay_ns;	/* adi,elna-settling-delay-ns */
+	uint32_t	elna_gain_mdB;	/* adi,elna-gain-mdB */
+	uint32_t	elna_bypass_loss_mdB;	/* adi,elna-bypass-loss-mdB */
+	uint8_t		elna_rx1_gpo0_control_enable;	/* adi,elna-rx1-gpo0-control-enable */
+	uint8_t		elna_rx2_gpo1_control_enable;	/* adi,elna-rx2-gpo1-control-enable */
+	uint8_t		elna_gaintable_all_index_enable;	/* adi,elna-gaintable-all-index-enable */
+	/* Digital Interface Control */
+	uint8_t		digital_interface_tune_skip_mode;	/* adi,digital-interface-tune-skip-mode */
+	uint8_t		digital_interface_tune_fir_disable;	/* adi,digital-interface-tune-fir-disable */
+	uint8_t		pp_tx_swap_enable;	/* adi,pp-tx-swap-enable */
+	uint8_t		pp_rx_swap_enable;	/* adi,pp-rx-swap-enable */
+	uint8_t		tx_channel_swap_enable;	/* adi,tx-channel-swap-enable */
+	uint8_t		rx_channel_swap_enable;	/* adi,rx-channel-swap-enable */
+	uint8_t		rx_frame_pulse_mode_enable;	/* adi,rx-frame-pulse-mode-enable */
+	uint8_t		two_t_two_r_timing_enable;	/* adi,2t2r-timing-enable */
+	uint8_t		invert_data_bus_enable;	/* adi,invert-data-bus-enable */
+	uint8_t		invert_data_clk_enable;	/* adi,invert-data-clk-enable */
+	uint8_t		fdd_alt_word_order_enable;	/* adi,fdd-alt-word-order-enable */
+	uint8_t		invert_rx_frame_enable;	/* adi,invert-rx-frame-enable */
+	uint8_t		fdd_rx_rate_2tx_enable;	/* adi,fdd-rx-rate-2tx-enable */
+	uint8_t		swap_ports_enable;	/* adi,swap-ports-enable */
+	uint8_t		single_data_rate_enable;	/* adi,single-data-rate-enable */
+	uint8_t		lvds_mode_enable;	/* adi,lvds-mode-enable */
+	uint8_t		half_duplex_mode_enable;	/* adi,half-duplex-mode-enable */
+	uint8_t		single_port_mode_enable;	/* adi,single-port-mode-enable */
+	uint8_t		full_port_enable;	/* adi,full-port-enable */
+	uint8_t		full_duplex_swap_bits_enable;	/* adi,full-duplex-swap-bits-enable */
+	uint32_t	delay_rx_data;	/* adi,delay-rx-data */
+	uint32_t	rx_data_clock_delay;	/* adi,rx-data-clock-delay */
+	uint32_t	rx_data_delay;	/* adi,rx-data-delay */
+	uint32_t	tx_fb_clock_delay;	/* adi,tx-fb-clock-delay */
+	uint32_t	tx_data_delay;	/* adi,tx-data-delay */
+	uint32_t	lvds_bias_mV;	/* adi,lvds-bias-mV */
+	uint8_t		lvds_rx_onchip_termination_enable;	/* adi,lvds-rx-onchip-termination-enable */
+	uint8_t		rx1rx2_phase_inversion_en;	/* adi,rx1-rx2-phase-inversion-enable */
+	uint8_t		lvds_invert1_control;	/* adi,lvds-invert1-control */
+	uint8_t		lvds_invert2_control;	/* adi,lvds-invert2-control */
+	/* GPO Control */
+	uint8_t		gpo_manual_mode_enable;			/* adi,gpo-manual-mode-enable */
+	uint32_t	gpo_manual_mode_enable_mask;	/* adi,gpo-manual-mode-enable-mask */
+	uint8_t		gpo0_inactive_state_high_enable;	/* adi,gpo0-inactive-state-high-enable */
+	uint8_t		gpo1_inactive_state_high_enable;	/* adi,gpo1-inactive-state-high-enable */
+	uint8_t		gpo2_inactive_state_high_enable;	/* adi,gpo2-inactive-state-high-enable */
+	uint8_t		gpo3_inactive_state_high_enable;	/* adi,gpo3-inactive-state-high-enable */
+	uint8_t		gpo0_slave_rx_enable;	/* adi,gpo0-slave-rx-enable */
+	uint8_t		gpo0_slave_tx_enable;	/* adi,gpo0-slave-tx-enable */
+	uint8_t		gpo1_slave_rx_enable;	/* adi,gpo1-slave-rx-enable */
+	uint8_t		gpo1_slave_tx_enable;	/* adi,gpo1-slave-tx-enable */
+	uint8_t		gpo2_slave_rx_enable;	/* adi,gpo2-slave-rx-enable */
+	uint8_t		gpo2_slave_tx_enable;	/* adi,gpo2-slave-tx-enable */
+	uint8_t		gpo3_slave_rx_enable;	/* adi,gpo3-slave-rx-enable */
+	uint8_t		gpo3_slave_tx_enable;	/* adi,gpo3-slave-tx-enable */
+	uint8_t		gpo0_rx_delay_us;	/* adi,gpo0-rx-delay-us */
+	uint8_t		gpo0_tx_delay_us;	/* adi,gpo0-tx-delay-us */
+	uint8_t		gpo1_rx_delay_us;	/* adi,gpo1-rx-delay-us */
+	uint8_t		gpo1_tx_delay_us;	/* adi,gpo1-tx-delay-us */
+	uint8_t		gpo2_rx_delay_us;	/* adi,gpo2-rx-delay-us */
+	uint8_t		gpo2_tx_delay_us;	/* adi,gpo2-tx-delay-us */
+	uint8_t		gpo3_rx_delay_us;	/* adi,gpo3-rx-delay-us */
+	uint8_t		gpo3_tx_delay_us;	/* adi,gpo3-tx-delay-us */
+	/* Tx Monitor Control */
+	uint32_t	low_high_gain_threshold_mdB;	/* adi,txmon-low-high-thresh */
+	uint32_t	low_gain_dB;	/* adi,txmon-low-gain */
+	uint32_t	high_gain_dB;	/* adi,txmon-high-gain */
+	uint8_t		tx_mon_track_en;	/* adi,txmon-dc-tracking-enable */
+	uint8_t		one_shot_mode_en;	/* adi,txmon-one-shot-mode-enable */
+	uint32_t	tx_mon_delay;	/* adi,txmon-delay */
+	uint32_t	tx_mon_duration;	/* adi,txmon-duration */
+	uint32_t	tx1_mon_front_end_gain;	/* adi,txmon-1-front-end-gain */
+	uint32_t	tx2_mon_front_end_gain;	/* adi,txmon-2-front-end-gain */
+	uint32_t	tx1_mon_lo_cm;	/* adi,txmon-1-lo-cm */
+	uint32_t	tx2_mon_lo_cm;	/* adi,txmon-2-lo-cm */
+	/* GPIO definitions */
+	struct gpio_init_param	gpio_resetb;	/* reset-gpios */
+	/* MCS Sync */
+	struct gpio_init_param	gpio_sync;	/* sync-gpios */
+	struct gpio_init_param	gpio_cal_sw1;	/* cal-sw1-gpios */
+	struct gpio_init_param	gpio_cal_sw2;	/* cal-sw2-gpios */
+
+	struct spi_init_param	spi_param;
+
+	/* External LO clocks */
+	uint32_t	(*ad9361_rfpll_ext_recalc_rate)(struct refclk_scale *clk_priv);
+	int32_t		(*ad9361_rfpll_ext_round_rate)(struct refclk_scale *clk_priv,
+			uint32_t rate);
+	int32_t		(*ad9361_rfpll_ext_set_rate)(struct refclk_scale *clk_priv,
+			uint32_t rate);
+
+} AD9361_InitParam;
+
+typedef struct {
+	uint32_t	rx;				/* 1, 2, 3(both) */
+	int32_t		rx_gain;		/* -12, -6, 0, 6 */
+	uint32_t	rx_dec;			/* 1, 2, 4 */
+	int16_t		rx_coef[128];
+	uint8_t		rx_coef_size;
+	uint32_t	rx_path_clks[6];
+	uint32_t	rx_bandwidth;
+} AD9361_RXFIRConfig;
+
+typedef struct {
+	uint32_t	tx;				/* 1, 2, 3(both) */
+	int32_t		tx_gain;		/* -6, 0 */
+	uint32_t	tx_int;			/* 1, 2, 4 */
+	int16_t		tx_coef[128];
+	uint8_t		tx_coef_size;
+	uint32_t	tx_path_clks[6];
+	uint32_t	tx_bandwidth;
+} AD9361_TXFIRConfig;
+
+enum ad9361_ensm_mode {
+	ENSM_MODE_TX,
+	ENSM_MODE_RX,
+	ENSM_MODE_ALERT,
+	ENSM_MODE_FDD,
+	ENSM_MODE_WAIT,
+	ENSM_MODE_SLEEP,
+	ENSM_MODE_PINCTRL,
+	ENSM_MODE_PINCTRL_FDD_INDEP,
+};
+
+#define ENABLE		1
+#define DISABLE		0
+
+#define RX1			0
+#define RX2			1
+
+#define TX1			0
+#define TX2			1
+
+#define A_BALANCED	0
+#define B_BALANCED	1
+#define C_BALANCED	2
+#define A_N			3
+#define A_P			4
+#define B_N			5
+#define B_P			6
+#define C_N			7
+#define C_P			8
+#define TX_MON1		9
+#define TX_MON2		10
+#define TX_MON1_2	11
+
+#define TXA			0
+#define TXB			1
+
+#define MODE_1x1	1
+#define MODE_2x2	2
+
+#define HIGHEST_OSR	0
+#define NOMINAL_OSR	1
+
+#define INT_LO		0
+#define EXT_LO		1
+
+#define ON			0
+#define OFF			1
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+/* Initialize the AD9361 part. */
+int32_t ad9361_init (struct ad9361_rf_phy **ad9361_phy,
+		     AD9361_InitParam *init_param);
+/* Free the allocated resources. */
+int32_t ad9361_remove(struct ad9361_rf_phy *phy);
+/* Set the Enable State Machine (ENSM) mode. */
+int32_t ad9361_set_en_state_machine_mode (struct ad9361_rf_phy *phy,
+		uint32_t mode);
+/* Get the Enable State Machine (ENSM) mode. */
+int32_t ad9361_get_en_state_machine_mode (struct ad9361_rf_phy *phy,
+		uint32_t *mode);
+/* Set the receive RF gain for the selected channel. */
+int32_t ad9361_set_rx_rf_gain (struct ad9361_rf_phy *phy, uint8_t ch,
+			       int32_t gain_db);
+/* Get current receive RF gain for the selected channel. */
+int32_t ad9361_get_rx_rf_gain (struct ad9361_rf_phy *phy, uint8_t ch,
+			       int32_t *gain_db);
+/* Set the RX RF bandwidth. */
+int32_t ad9361_set_rx_rf_bandwidth (struct ad9361_rf_phy *phy,
+				    uint32_t bandwidth_hz);
+/* Get the RX RF bandwidth. */
+int32_t ad9361_get_rx_rf_bandwidth (struct ad9361_rf_phy *phy,
+				    uint32_t *bandwidth_hz);
+/* Set the RX sampling frequency. */
+int32_t ad9361_set_rx_sampling_freq (struct ad9361_rf_phy *phy,
+				     uint32_t sampling_freq_hz);
+/* Get current RX sampling frequency. */
+int32_t ad9361_get_rx_sampling_freq (struct ad9361_rf_phy *phy,
+				     uint32_t *sampling_freq_hz);
+/* Set the RX LO frequency. */
+int32_t ad9361_set_rx_lo_freq (struct ad9361_rf_phy *phy, uint64_t lo_freq_hz);
+/* Get current RX LO frequency. */
+int32_t ad9361_get_rx_lo_freq (struct ad9361_rf_phy *phy, uint64_t *lo_freq_hz);
+/* Switch between internal and external LO. */
+int32_t ad9361_set_rx_lo_int_ext(struct ad9361_rf_phy *phy, uint8_t int_ext);
+/* Get the RSSI for the selected channel. */
+int32_t ad9361_get_rx_rssi (struct ad9361_rf_phy *phy, uint8_t ch,
+			    struct rf_rssi *rssi);
+/* Set the gain control mode for the selected channel. */
+int32_t ad9361_set_rx_gain_control_mode (struct ad9361_rf_phy *phy, uint8_t ch,
+		uint8_t gc_mode);
+/* Get the gain control mode for the selected channel. */
+int32_t ad9361_get_rx_gain_control_mode (struct ad9361_rf_phy *phy, uint8_t ch,
+		uint8_t *gc_mode);
+/* Set the RX FIR filter configuration. */
+int32_t ad9361_set_rx_fir_config (struct ad9361_rf_phy *phy,
+				  AD9361_RXFIRConfig fir_cfg);
+/* Get the RX FIR filter configuration. */
+int32_t ad9361_get_rx_fir_config(struct ad9361_rf_phy *phy, uint8_t rx_ch,
+				 AD9361_RXFIRConfig *fir_cfg);
+/* Enable/disable the RX FIR filter. */
+int32_t ad9361_set_rx_fir_en_dis (struct ad9361_rf_phy *phy, uint8_t en_dis);
+/* Get the status of the RX FIR filter. */
+int32_t ad9361_get_rx_fir_en_dis (struct ad9361_rf_phy *phy, uint8_t *en_dis);
+/* Enable/disable the RX RFDC Tracking. */
+int32_t ad9361_set_rx_rfdc_track_en_dis (struct ad9361_rf_phy *phy,
+		uint8_t en_dis);
+/* Get the status of the RX RFDC Tracking. */
+int32_t ad9361_get_rx_rfdc_track_en_dis (struct ad9361_rf_phy *phy,
+		uint8_t *en_dis);
+/* Enable/disable the RX BasebandDC Tracking. */
+int32_t ad9361_set_rx_bbdc_track_en_dis (struct ad9361_rf_phy *phy,
+		uint8_t en_dis);
+/* Get the status of the RX BasebandDC Tracking. */
+int32_t ad9361_get_rx_bbdc_track_en_dis (struct ad9361_rf_phy *phy,
+		uint8_t *en_dis);
+/* Enable/disable the RX Quadrature Tracking. */
+int32_t ad9361_set_rx_quad_track_en_dis (struct ad9361_rf_phy *phy,
+		uint8_t en_dis);
+/* Get the status of the RX Quadrature Tracking. */
+int32_t ad9361_get_rx_quad_track_en_dis (struct ad9361_rf_phy *phy,
+		uint8_t *en_dis);
+/* Set the RX RF input port. */
+int32_t ad9361_set_rx_rf_port_input (struct ad9361_rf_phy *phy, uint32_t mode);
+/* Get the selected RX RF input port. */
+int32_t ad9361_get_rx_rf_port_input (struct ad9361_rf_phy *phy, uint32_t *mode);
+/* Store RX fastlock profile. */
+int32_t ad9361_rx_fastlock_store(struct ad9361_rf_phy *phy, uint32_t profile);
+/* Recall RX fastlock profile. */
+int32_t ad9361_rx_fastlock_recall(struct ad9361_rf_phy *phy, uint32_t profile);
+/* Load RX fastlock profile. */
+int32_t ad9361_rx_fastlock_load(struct ad9361_rf_phy *phy, uint32_t profile,
+				uint8_t *values);
+/* Save RX fastlock profile. */
+int32_t ad9361_rx_fastlock_save(struct ad9361_rf_phy *phy, uint32_t profile,
+				uint8_t *values);
+/* Power down the RX Local Oscillator. */
+int32_t ad9361_rx_lo_powerdown(struct ad9361_rf_phy *phy, uint8_t option);
+/* Get the RX Local Oscillator power status. */
+int32_t ad9361_get_rx_lo_power(struct ad9361_rf_phy *phy, uint8_t *option);
+/* Set the transmit attenuation for the selected channel. */
+int32_t ad9361_set_tx_attenuation (struct ad9361_rf_phy *phy, uint8_t ch,
+				   uint32_t attenuation_mdb);
+/* Get current transmit attenuation for the selected channel. */
+int32_t ad9361_get_tx_attenuation (struct ad9361_rf_phy *phy, uint8_t ch,
+				   uint32_t *attenuation_mdb);
+/* Set the TX RF bandwidth. */
+int32_t ad9361_set_tx_rf_bandwidth (struct ad9361_rf_phy *phy,
+				    uint32_t bandwidth_hz);
+/* Get the TX RF bandwidth. */
+int32_t ad9361_get_tx_rf_bandwidth (struct ad9361_rf_phy *phy,
+				    uint32_t *bandwidth_hz);
+/* Set the TX sampling frequency. */
+int32_t ad9361_set_tx_sampling_freq (struct ad9361_rf_phy *phy,
+				     uint32_t sampling_freq_hz);
+/* Get current TX sampling frequency. */
+int32_t ad9361_get_tx_sampling_freq (struct ad9361_rf_phy *phy,
+				     uint32_t *sampling_freq_hz);
+/* Set the TX LO frequency. */
+int32_t ad9361_set_tx_lo_freq (struct ad9361_rf_phy *phy, uint64_t lo_freq_hz);
+/* Get current TX LO frequency. */
+int32_t ad9361_get_tx_lo_freq (struct ad9361_rf_phy *phy, uint64_t *lo_freq_hz);
+/* Switch between internal and external LO. */
+int32_t ad9361_set_tx_lo_int_ext(struct ad9361_rf_phy *phy, uint8_t int_ext);
+/* Set the TX FIR filter configuration. */
+int32_t ad9361_set_tx_fir_config (struct ad9361_rf_phy *phy,
+				  AD9361_TXFIRConfig fir_cfg);
+/* Get the TX FIR filter configuration. */
+int32_t ad9361_get_tx_fir_config(struct ad9361_rf_phy *phy, uint8_t tx_ch,
+				 AD9361_TXFIRConfig *fir_cfg);
+/* Enable/disable the TX FIR filter. */
+int32_t ad9361_set_tx_fir_en_dis (struct ad9361_rf_phy *phy, uint8_t en_dis);
+/* Get the status of the TX FIR filter. */
+int32_t ad9361_get_tx_fir_en_dis (struct ad9361_rf_phy *phy, uint8_t *en_dis);
+/* Get the TX RSSI for the selected channel. */
+int32_t ad9361_get_tx_rssi (struct ad9361_rf_phy *phy, uint8_t ch,
+			    uint32_t *rssi_db_x_1000);
+/* Set the TX RF output port. */
+int32_t ad9361_set_tx_rf_port_output (struct ad9361_rf_phy *phy, uint32_t mode);
+/* Get the selected TX RF output port. */
+int32_t ad9361_get_tx_rf_port_output (struct ad9361_rf_phy *phy,
+				      uint32_t *mode);
+/* Enable/disable the auto calibration. */
+int32_t ad9361_set_tx_auto_cal_en_dis (struct ad9361_rf_phy *phy,
+				       uint8_t en_dis);
+/* Get the status of the auto calibration flag. */
+int32_t ad9361_get_tx_auto_cal_en_dis (struct ad9361_rf_phy *phy,
+				       uint8_t *en_dis);
+/* Store TX fastlock profile. */
+int32_t ad9361_tx_fastlock_store(struct ad9361_rf_phy *phy, uint32_t profile);
+/* Recall TX fastlock profile. */
+int32_t ad9361_tx_fastlock_recall(struct ad9361_rf_phy *phy, uint32_t profile);
+/* Load TX fastlock profile. */
+int32_t ad9361_tx_fastlock_load(struct ad9361_rf_phy *phy, uint32_t profile,
+				uint8_t *values);
+/* Save TX fastlock profile. */
+int32_t ad9361_tx_fastlock_save(struct ad9361_rf_phy *phy, uint32_t profile,
+				uint8_t *values);
+/* Power down the TX Local Oscillator. */
+int32_t ad9361_tx_lo_powerdown(struct ad9361_rf_phy *phy, uint8_t option);
+/* Get the TX Local Oscillator power status. */
+int32_t ad9361_get_tx_lo_power(struct ad9361_rf_phy *phy, uint8_t *option);
+/* Set the RX and TX path rates. */
+int32_t ad9361_set_trx_path_clks(struct ad9361_rf_phy *phy,
+				 uint32_t *rx_path_clks, uint32_t *tx_path_clks);
+/* Get the RX and TX path rates. */
+int32_t ad9361_get_trx_path_clks(struct ad9361_rf_phy *phy,
+				 uint32_t *rx_path_clks, uint32_t *tx_path_clks);
+/* Set the number of channels mode. */
+int32_t ad9361_set_no_ch_mode(struct ad9361_rf_phy *phy, uint8_t no_ch_mode);
+/* Do multi chip synchronization. */
+int32_t ad9361_do_mcs(struct ad9361_rf_phy *phy_master,
+		      struct ad9361_rf_phy *phy_slave);
+/* Enable/disable the TRX FIR filters. */
+int32_t ad9361_set_trx_fir_en_dis (struct ad9361_rf_phy *phy, uint8_t en_dis);
+/* Set the OSR rate governor. */
+int32_t ad9361_set_trx_rate_gov (struct ad9361_rf_phy *phy, uint32_t rate_gov);
+/* Get the OSR rate governor. */
+int32_t ad9361_get_trx_rate_gov (struct ad9361_rf_phy *phy, uint32_t *rate_gov);
+/* Perform the selected calibration. */
+int32_t ad9361_do_calib(struct ad9361_rf_phy *phy, uint32_t cal, int32_t arg);
+/* Load and enable TRX FIR filters configurations. */
+int32_t ad9361_trx_load_enable_fir(struct ad9361_rf_phy *phy,
+				   AD9361_RXFIRConfig rx_fir_cfg,
+				   AD9361_TXFIRConfig tx_fir_cfg);
+/* Do DCXO coarse tuning. */
+int32_t ad9361_do_dcxo_tune_coarse(struct ad9361_rf_phy *phy,
+				   uint32_t coarse);
+/* Do DCXO fine tuning. */
+int32_t ad9361_do_dcxo_tune_fine(struct ad9361_rf_phy *phy,
+				 uint32_t fine);
+/* Get the temperature. */
+int32_t ad9361_get_temperature(struct ad9361_rf_phy *phy,
+			       int32_t *temp);
+#endif
@@ -0,0 +1,86 @@
+
+/***************************************************************************//**
+ *   @file   ad9361_conv.c
+ *   @brief  Implementation of AD9361 Conv Driver.
+********************************************************************************
+ * Copyright 2014-2015(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <inttypes.h>
+#include <string.h>
+#include "ad9361.h"
+#include "ad9361_util.h"
+#include "delay.h"
+#include "../../../config/app_config.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+
+/**
+ * HDL loopback enable/disable.
+ * @param phy The AD9361 state structure.
+ * @param enable Enable/disable option.
+ * @return 0 in case of success, negative error code otherwise.
+ */
+int32_t ad9361_hdl_loopback(struct ad9361_rf_phy *phy, bool enable)
+{
+	return -ENODEV;
+}
+
+/**
+ * Digital tune.
+ * @param phy The AD9361 state structure.
+ * @param max_freq Maximum frequency.
+ * @param flags Flags: BE_VERBOSE, BE_MOREVERBOSE, DO_IDELAY, DO_ODELAY.
+ * @return 0 in case of success, negative error code otherwise.
+ */
+int32_t ad9361_dig_tune(struct ad9361_rf_phy *phy, uint32_t max_freq,
+						enum dig_tune_flags flags)
+{
+	return 0;
+}
+
+/**
+* Setup the AD9361 device.
+* @param phy The AD9361 state structure.
+* @return 0 in case of success, negative error code otherwise.
+*/
+int32_t ad9361_post_setup(struct ad9361_rf_phy *phy)
+{
+	return 0;
+}
@@ -0,0 +1,335 @@
+/***************************************************************************//**
+ *   @file   ad9361_util.c
+ *   @brief  AD9361 Implementation of Util Driver.
+ *   @author DBogdan (dragos.bogdan@analog.com)
+********************************************************************************
+ * Copyright 2013(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <string.h>
+#include "ad9361_util.h"
+#include "../../../include/delay.h"
+
+/******************************************************************************/
+/*************************** Macros Definitions *******************************/
+/******************************************************************************/
+#define BITS_PER_LONG		32
+
+/***************************************************************************//**
+ * @brief clk_prepare_enable
+*******************************************************************************/
+int32_t clk_prepare_enable(struct clk *clk)
+{
+	if (clk) {
+		// Unused variable - fix compiler warning
+	}
+
+	return 0;
+}
+
+/***************************************************************************//**
+ * @brief clk_get_rate
+*******************************************************************************/
+uint32_t clk_get_rate(struct ad9361_rf_phy *phy,
+					  struct refclk_scale *clk_priv)
+{
+	uint32_t rate = 0;
+	uint32_t source;
+
+	source = clk_priv->source;
+
+	switch (source) {
+		case TX_REFCLK:
+		case RX_REFCLK:
+		case BB_REFCLK:
+			rate = ad9361_clk_factor_recalc_rate(clk_priv,
+						phy->clk_refin->rate);
+			break;
+		case TX_RFPLL_INT:
+		case RX_RFPLL_INT:
+			rate = ad9361_rfpll_int_recalc_rate(clk_priv,
+						phy->clks[clk_priv->parent_source]->rate);
+			break;
+		case RX_RFPLL_DUMMY:
+		case TX_RFPLL_DUMMY:
+			rate = ad9361_rfpll_dummy_recalc_rate(clk_priv);
+			break;
+		case TX_RFPLL:
+		case RX_RFPLL:
+			rate = ad9361_rfpll_recalc_rate(clk_priv);
+			break;
+		case BBPLL_CLK:
+			rate = ad9361_bbpll_recalc_rate(clk_priv,
+						phy->clks[clk_priv->parent_source]->rate);
+			break;
+		case ADC_CLK:
+		case R2_CLK:
+		case R1_CLK:
+		case CLKRF_CLK:
+		case RX_SAMPL_CLK:
+		case DAC_CLK:
+		case T2_CLK:
+		case T1_CLK:
+		case CLKTF_CLK:
+		case TX_SAMPL_CLK:
+			rate = ad9361_clk_factor_recalc_rate(clk_priv,
+						phy->clks[clk_priv->parent_source]->rate);
+			break;
+		default:
+			break;
+	}
+
+	return rate;
+}
+
+/***************************************************************************//**
+ * @brief clk_set_rate
+*******************************************************************************/
+int32_t clk_set_rate(struct ad9361_rf_phy *phy,
+					 struct refclk_scale *clk_priv,
+					 uint32_t rate)
+{
+	uint32_t source;
+	int32_t i;
+	uint32_t round_rate;
+
+	source = clk_priv->source;
+	if(phy->clks[source]->rate != rate)
+	{
+		switch (source) {
+			case TX_REFCLK:
+			case RX_REFCLK:
+			case BB_REFCLK:
+				round_rate = ad9361_clk_factor_round_rate(clk_priv, rate,
+								&phy->clk_refin->rate);
+				ad9361_clk_factor_set_rate(clk_priv, round_rate,
+						phy->clk_refin->rate);
+				phy->clks[source]->rate = ad9361_clk_factor_recalc_rate(clk_priv,
+												phy->clk_refin->rate);
+				break;
+			case TX_RFPLL_INT:
+			case RX_RFPLL_INT:
+				round_rate = ad9361_rfpll_int_round_rate(clk_priv, rate,
+								&phy->clks[clk_priv->parent_source]->rate);
+				ad9361_rfpll_int_set_rate(clk_priv, round_rate,
+						phy->clks[clk_priv->parent_source]->rate);
+				phy->clks[source]->rate = ad9361_rfpll_int_recalc_rate(clk_priv,
+											phy->clks[clk_priv->parent_source]->rate);
+				break;
+			case RX_RFPLL_DUMMY:
+			case TX_RFPLL_DUMMY:
+				ad9361_rfpll_dummy_set_rate(clk_priv, rate);
+				break;
+			case TX_RFPLL:
+			case RX_RFPLL:
+				round_rate = ad9361_rfpll_round_rate(clk_priv, rate);
+				ad9361_rfpll_set_rate(clk_priv, round_rate);
+				phy->clks[source]->rate = ad9361_rfpll_recalc_rate(clk_priv);
+				break;
+			case BBPLL_CLK:
+				round_rate = ad9361_bbpll_round_rate(clk_priv, rate,
+								&phy->clks[clk_priv->parent_source]->rate);
+				ad9361_bbpll_set_rate(clk_priv, round_rate,
+					phy->clks[clk_priv->parent_source]->rate);
+				phy->clks[source]->rate = ad9361_bbpll_recalc_rate(clk_priv,
+											phy->clks[clk_priv->parent_source]->rate);
+				phy->bbpll_initialized = true;
+				break;
+			case ADC_CLK:
+			case R2_CLK:
+			case R1_CLK:
+			case CLKRF_CLK:
+			case RX_SAMPL_CLK:
+			case DAC_CLK:
+			case T2_CLK:
+			case T1_CLK:
+			case CLKTF_CLK:
+			case TX_SAMPL_CLK:
+				round_rate = ad9361_clk_factor_round_rate(clk_priv, rate,
+								&phy->clks[clk_priv->parent_source]->rate);
+				ad9361_clk_factor_set_rate(clk_priv, round_rate,
+						phy->clks[clk_priv->parent_source]->rate);
+				phy->clks[source]->rate = ad9361_clk_factor_recalc_rate(clk_priv,
+											phy->clks[clk_priv->parent_source]->rate);
+				break;
+			default:
+				break;
+		}
+		for(i = BB_REFCLK; i < BBPLL_CLK; i++)
+		{
+			phy->clks[i]->rate = ad9361_clk_factor_recalc_rate(phy->ref_clk_scale[i],
+									phy->clk_refin->rate);
+		}
+		phy->clks[BBPLL_CLK]->rate = ad9361_bbpll_recalc_rate(phy->ref_clk_scale[BBPLL_CLK],
+										phy->clks[phy->ref_clk_scale[BBPLL_CLK]->parent_source]->rate);
+		for(i = ADC_CLK; i < RX_RFPLL_INT; i++)
+		{
+			phy->clks[i]->rate = ad9361_clk_factor_recalc_rate(phy->ref_clk_scale[i],
+									phy->clks[phy->ref_clk_scale[i]->parent_source]->rate);
+		}
+		for(i = RX_RFPLL_INT; i < RX_RFPLL_DUMMY; i++)
+		{
+			phy->clks[i]->rate = ad9361_rfpll_int_recalc_rate(phy->ref_clk_scale[i],
+									phy->clks[phy->ref_clk_scale[i]->parent_source]->rate);
+		}
+		for(i = RX_RFPLL_DUMMY; i < RX_RFPLL; i++)
+		{
+			phy->clks[i]->rate = ad9361_rfpll_dummy_recalc_rate(phy->ref_clk_scale[i]);
+		}
+		for(i = RX_RFPLL; i < NUM_AD9361_CLKS; i++)
+		{
+			phy->clks[i]->rate = ad9361_rfpll_recalc_rate(phy->ref_clk_scale[i]);
+		}
+	} else {
+		if ((source == BBPLL_CLK) && !phy->bbpll_initialized) {
+			round_rate = ad9361_bbpll_round_rate(clk_priv, rate,
+							&phy->clks[clk_priv->parent_source]->rate);
+			ad9361_bbpll_set_rate(clk_priv, round_rate,
+				phy->clks[clk_priv->parent_source]->rate);
+			phy->clks[source]->rate = ad9361_bbpll_recalc_rate(clk_priv,
+										phy->clks[clk_priv->parent_source]->rate);
+			phy->bbpll_initialized = true;
+		}
+	}
+
+	return 0;
+}
+
+/***************************************************************************//**
+ * @brief int_sqrt
+*******************************************************************************/
+uint32_t int_sqrt(uint32_t x)
+{
+	uint32_t b, m, y = 0;
+
+	if (x <= 1)
+		return x;
+
+	m = 1UL << (BITS_PER_LONG - 2);
+	while (m != 0) {
+		b = y + m;
+		y >>= 1;
+
+		if (x >= b) {
+			x -= b;
+			y += m;
+		}
+		m >>= 2;
+	}
+
+	return y;
+}
+
+/***************************************************************************//**
+ * @brief ilog2
+*******************************************************************************/
+int32_t ilog2(int32_t x)
+{
+	int32_t A = !(!(x >> 16));
+	int32_t count = 0;
+	int32_t x_copy = x;
+
+	count = count + (A << 4);
+
+	x_copy = (((~A + 1) & (x >> 16)) + (~(~A + 1) & x));
+
+	A = !(!(x_copy >> 8));
+	count = count + (A << 3);
+	x_copy = (((~A + 1) & (x_copy >> 8)) + (~(~A + 1) & x_copy));
+
+	A = !(!(x_copy >> 4));
+	count = count + (A << 2);
+	x_copy = (((~A + 1) & (x_copy >> 4)) + (~(~A + 1) & x_copy));
+
+	A = !(!(x_copy >> 2));
+	count = count + (A << 1);
+	x_copy = (((~A + 1) & (x_copy >> 2)) + (~(~A + 1) & x_copy));
+
+	A = !(!(x_copy >> 1));
+	count = count + A;
+
+	return count;
+}
+
+/***************************************************************************//**
+ * @brief find_first_bit
+*******************************************************************************/
+uint32_t find_first_bit(uint32_t word)
+{
+	int32_t num = 0;
+
+	if ((word & 0xffff) == 0) {
+			num += 16;
+			word >>= 16;
+	}
+	if ((word & 0xff) == 0) {
+			num += 8;
+			word >>= 8;
+	}
+	if ((word & 0xf) == 0) {
+			num += 4;
+			word >>= 4;
+	}
+	if ((word & 0x3) == 0) {
+			num += 2;
+			word >>= 2;
+	}
+	if ((word & 0x1) == 0)
+			num += 1;
+	return num;
+}
+
+/***************************************************************************//**
+ * @brief ERR_PTR
+*******************************************************************************/
+void * ERR_PTR(long error)
+{
+	return (void *) error;
+}
+
+/***************************************************************************//**
+ * @brief zmalloc
+*******************************************************************************/
+void *zmalloc(size_t size)
+{
+	void *ptr = malloc(size);
+	if (ptr)
+		memset(ptr, 0, size);
+	mdelay(1);
+
+	return ptr;
+}
@@ -0,0 +1,120 @@
+/***************************************************************************//**
+ *   @file   ad9361_util.h
+ *   @brief  AD9361 Header file of Util driver.
+ *   @author DBogdan (dragos.bogdan@analog.com)
+********************************************************************************
+ * Copyright 2013(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+#ifndef __AD9361_UTIL_H__
+#define __AD9361_UTIL_H__
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <limits.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include "ad9361.h"
+#include "common.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+#define CLK_IGNORE_UNUSED						BIT(3)
+#define CLK_GET_RATE_NOCACHE					BIT(6)
+
+#if defined(HAVE_VERBOSE_MESSAGES)
+#define dev_err(dev, format, ...)		({printf(format, ## __VA_ARGS__);printf("\n"); })
+#define dev_warn(dev, format, ...)		({printf(format, ## __VA_ARGS__);printf("\n"); })
+#if defined(HAVE_DEBUG_MESSAGES)
+#define dev_dbg(dev, format, ...)		({printf(format, ## __VA_ARGS__);printf("\n"); })
+#else
+#define dev_dbg(dev, format, ...)	({ if (0) printf(format, ## __VA_ARGS__); })
+#endif
+#define printk(format, ...)			printf(format, ## __VA_ARGS__)
+#else
+#define dev_err(dev, format, ...)	({ if (0) printf(format, ## __VA_ARGS__); })
+#define dev_warn(dev, format, ...)	({ if (0) printf(format, ## __VA_ARGS__); })
+#define dev_dbg(dev, format, ...)	({ if (0) printf(format, ## __VA_ARGS__); })
+#define printk(format, ...)			({ if (0) printf(format, ## __VA_ARGS__); })
+#endif
+
+struct device {
+};
+
+struct spi_device {
+	struct device	dev;
+	uint8_t 		id_no;
+};
+
+struct axiadc_state {
+	struct ad9361_rf_phy	*phy;
+	uint32_t				pcore_version;
+};
+
+struct axiadc_chip_info {
+	char		*name;
+	int32_t		num_channels;
+};
+
+struct axiadc_converter {
+	struct axiadc_chip_info	*chip_info;
+	uint32_t				scratch_reg[16];
+};
+
+#ifdef WIN32
+#include "basetsd.h"
+typedef SSIZE_T ssize_t;
+#define strsep(s, ct)				0
+#define snprintf(s, n, format, ...)	0
+#define __func__ __FUNCTION__
+#endif
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+int32_t clk_prepare_enable(struct clk *clk);
+uint32_t clk_get_rate(struct ad9361_rf_phy *phy,
+					  struct refclk_scale *clk_priv);
+int32_t clk_set_rate(struct ad9361_rf_phy *phy,
+					 struct refclk_scale *clk_priv,
+					 uint32_t rate);
+uint32_t int_sqrt(uint32_t x);
+int32_t ilog2(int32_t x);
+uint32_t find_first_bit(uint32_t word);
+void * ERR_PTR(long error);
+void *zmalloc(size_t size);
+
+#endif
@@ -0,0 +1,66 @@
+/***************************************************************************//**
+ *   @file   common.h
+ *   @brief  Header file of Common Driver.
+ *   @author DBogdan (dragos.bogdan@analog.com)
+********************************************************************************
+ * Copyright 2013(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+#ifndef __AD9361_COMMON_H_
+#define __AD9361_COMMON_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdint.h>
+#include "../../../include/error.h"
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+#if defined (__STDC__) && (__STDC_VERSION__ >= 199901L)
+#include <stdbool.h>
+#else
+typedef enum { false, true } bool;
+#endif
+
+struct clk {
+	const char	*name;
+	uint32_t	rate;
+};
+
+struct clk_hw {
+	struct clk *clk;
+};
+
+#endif // __AD9361_COMMON_H_
@@ -0,0 +1,151 @@
+/***************************************************************************//**
+ * @file ad9361_reg.c
+ * @brief Implementation of AD9680 Driver.
+ * @author DBogdan (dragos.bogdan@analog.com)
+ ********************************************************************************
+ * Copyright 2014-2016(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Analog Devices, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * - The use of this software may or may not infringe the patent rights
+ * of one or more patent holders. This license does not release you
+ * from the requirement that you obtain separate licenses from these
+ * patent holders to use this software.
+ * - Use of the software either in source or binary form, must be run
+ * on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include "ad9361_reg.h"
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "../../../include/error.h"
+
+/***************************************************************************//**
+ * @brief ad9361_reg_read
+ *******************************************************************************/
+int32_t ad9361_reg_read(struct ad9361_reg_dev *dev,
+			uint16_t reg_addr,
+			uint8_t *reg_data)
+{
+	uint8_t tx_buf[2];
+	uint8_t rx_buf[1];
+	int32_t ret;
+
+	tx_buf[0] = reg_addr >> 8;
+	tx_buf[1] = reg_addr & 0xFF;
+	
+
+	ret = spi_write_and_read_3wire(dev->spi_desc,
+			tx_buf, rx_buf, 2, 1);
+
+	*reg_data = rx_buf[0];
+
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief ad9361_reg_write
+ *******************************************************************************/
+int32_t ad9361_reg_write(struct ad9361_reg_dev *dev,
+			 uint16_t reg_addr,
+			 uint8_t reg_data)
+{
+	uint8_t buf[3];
+
+	int32_t ret;
+
+	buf[0] = 0x80 | reg_addr >> 8;
+	buf[1] = reg_addr & 0xFF;
+	buf[2] = reg_data;
+
+	ret = spi_write_and_read_3wire(dev->spi_desc,
+				 buf, NULL, 3, 0);
+	return ret;
+}
+
+/***************************************************************************//**
+ * @brief ad9361_reg_init
+ *******************************************************************************/
+int32_t ad9361_reg_init(struct ad9361_reg_dev **device,
+		     const struct ad9361_reg_init_param *init_param)
+{
+	int ret = SUCCESS;
+	struct ad9361_reg_dev *dev;
+
+	dev = (struct ad9361_reg_dev *)malloc(sizeof(*dev));
+	if (!dev)
+		return FAILURE;
+
+	/* SPI */
+	ret = spi_init(&dev->spi_desc, init_param->spi_init);
+	ret |= gpio_get(&dev->gpio_desc_resetb, init_param->gpio_resetb);
+
+	gpio_direction_output(dev->gpio_desc_resetb, 0);
+
+	ad9361_reg_reset(dev);
+
+	*device = dev;
+
+	return ret;
+}
+
+/**
+ * AD9361 Device Reset
+ * @param phy The AD9361 state structure.
+ * @return 0 in case of success, negative error code otherwise.
+ */
+int32_t ad9361_reg_reset(struct ad9361_reg_dev *dev)
+{
+	if (dev->gpio_desc_resetb) {
+		gpio_set_value(dev->gpio_desc_resetb, 0);
+		mdelay(10);
+		gpio_set_value(dev->gpio_desc_resetb, 1);
+		mdelay(10);
+		return 0;
+	}
+	return 0;
+}
+
+/***************************************************************************//**
+ * @brief Free the resources allocated by ad9361_reg_setup().
+ *
+ * @param dev - The device structure.
+ *
+ * @return SUCCESS in case of success, negative error code otherwise.
+*******************************************************************************/
+int32_t ad9361_reg_remove(struct ad9361_reg_dev *dev)
+{
+	int32_t ret;
+
+	ret = spi_remove(dev->spi_desc);
+
+	free(dev);
+
+	return ret;
+}
@@ -0,0 +1,104 @@
+/***************************************************************************//**
+ * @file ad9361_reg.h
+ * @brief Header file of ad9361_reg Driver.
+ * @author DBogdan (dragos.bogdan@analog.com)
+ ********************************************************************************
+ * Copyright 2014-2016(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Analog Devices, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * - The use of this software may or may not infringe the patent rights
+ * of one or more patent holders. This license does not release you
+ * from the requirement that you obtain separate licenses from these
+ * patent holders to use this software.
+ * - Use of the software either in source or binary form, must be run
+ * on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************/
+#ifndef ad9361_reg_H_
+#define ad9361_reg_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdint.h>
+#include "delay.h"
+#include "spi.h"
+#include "gpio.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+struct ad9361_reg_dev {
+	/* SPI */
+	struct spi_desc	*spi_desc;
+	struct gpio_desc 	*gpio_desc_resetb;
+};
+
+struct ad9361_reg_init_param {
+	/* SPI */
+	struct spi_init_param	*spi_init;
+	struct gpio_init_param	*gpio_resetb;
+};
+
+enum Operation_Type{
+	AD9361_WRITE,
+	AD9361_READ,
+	AD9361_WAIT,
+	AD9361_WHEN
+};
+
+struct ad9361_reg_config {
+	int operation;
+	uint16_t val1;
+	uint16_t val2;
+};
+
+
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+
+int32_t ad9361_reg_read(struct ad9361_reg_dev *dev,
+			uint16_t reg_addr,
+			uint8_t *reg_data);
+
+int32_t ad9361_reg_write(struct ad9361_reg_dev *dev,
+			 uint16_t reg_addr,
+			 uint8_t reg_data);
+
+int32_t ad9361_reg_init(struct ad9361_reg_dev **device,
+		     const struct ad9361_reg_init_param *init_param);
+
+int32_t ad9361_reg_reset(struct ad9361_reg_dev *dev);
+
+int32_t ad9361_reg_remove(struct ad9361_reg_dev *dev);
+
+#endif
@@ -1,275 +0,0 @@
-/**
- * \file common.c
- * \brief Contains Mykonos API common wrapper functions for user hardware platform drivers
- */
-
-/**
-* \page Disclaimer Legal Disclaimer
-* Copyright 2015-2017 Analog Devices Inc.
-* Released under the AD9371 API license, for more information see the "LICENSE.txt" file in this zip file.
-*
-*/
-
-#include <stdio.h>
-#include <time.h>
-#include <errno.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include "common.h" 
-#include "platform_drivers.h"
-#include "parameters.h"
-
-ADI_LOGLEVEL CMB_LOGLEVEL = ADIHAL_LOG_NONE;
-
-static uint32_t _desired_time_to_elapse_us = 0;
-struct spi_desc 	*spi_ad_desc;
-struct gpio_desc	*gpio_ad9371_resetb;
-struct gpio_desc	*gpio_ad9528_resetb;
-struct gpio_desc	*gpio_ad9528_sysref_req;
-
-commonErr_t CMB_initPlatform(void)
-{
-	struct spi_init_param spi_param;
-	int32_t status = COMMONERR_OK;
-
-	status |= gpio_get(&gpio_ad9371_resetb, AD9371_RESET_B);
-	status |= gpio_get(&gpio_ad9528_resetb, AD9528_RESET_B);
-	status |= gpio_get(&gpio_ad9528_sysref_req, AD9528_SYSREF_REQ);
-
-	spi_param.id = 0;
-	spi_param.mode = SPI_MODE_0;
-	spi_param.chip_select = AD9371_CS;
-	spi_param.max_speed_hz = 25000000u;
-
-	status |= spi_init(&spi_ad_desc, &spi_param);
-
-	if (status != SUCCESS) {
-		return COMMONERR_FAILED;
-	}
-
-	return COMMONERR_OK;
-}
-
-commonErr_t CMB_closeHardware(void)
-{
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_setGPIO(uint32_t GPIO)
-{
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_hardReset(uint8_t spiChipSelectIndex)
-{
-	struct gpio_desc *reset_gpio;
-
-	switch (spiChipSelectIndex) {
-	case AD9371_CS:
-		reset_gpio = gpio_ad9371_resetb;
-		break;
-	case AD9528_CS:
-		reset_gpio = gpio_ad9528_resetb;
-		break;
-	default:
-		return(COMMONERR_FAILED);
-	}
-
-	gpio_direction_output(reset_gpio, 1);
-	CMB_wait_ms(1);
-	gpio_direction_output(reset_gpio, 0);
-	CMB_wait_ms(1);
-	gpio_direction_output(reset_gpio, 1);
-	CMB_wait_ms(1);
-
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_setSPIOptions(spiSettings_t *spiSettings)
-{
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_setSPIChannel(uint16_t chipSelectIndex )
-{
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_SPIWriteByte(spiSettings_t *spiSettings, uint16_t addr,
-			     uint8_t data)
-{
-	uint8_t buf[3];
-
-	spi_ad_desc->chip_select = spiSettings->chipSelectIndex - 1;
-
-	buf[0] = (uint8_t) ((addr >> 8) & 0x7f);
-	buf[1] = (uint8_t) (addr & 0xff);
-	buf[2] = (uint8_t) data;
-
-	spi_write_and_read(spi_ad_desc, buf, 3);
-
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_SPIWriteBytes(spiSettings_t *spiSettings, uint16_t *addr,
-			      uint8_t *data, uint32_t count)
-{
-	uint32_t index;
-
-	for (index = 0; index < count; index++)
-		if (CMB_SPIWriteByte(spiSettings, *(addr + index),
-				     *(data + index)) != COMMONERR_OK)
-			return(COMMONERR_FAILED);
-
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_SPIReadByte(spiSettings_t *spiSettings, uint16_t addr,
-			    uint8_t *readdata)
-{
-	uint8_t buf[3];
-
-	spi_ad_desc->chip_select = spiSettings->chipSelectIndex - 1;
-
-	buf[0] = (uint8_t) ((addr >> 8) | 0x80);
-	buf[1] = (uint8_t) (addr & 0xff);
-	buf[2] = (uint8_t) 0x00;
-
-	spi_write_and_read(spi_ad_desc, buf, 3);
-	*readdata = buf[2];
-
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_SPIWriteField(spiSettings_t *spiSettings, uint16_t addr,
-			      uint8_t field_val, uint8_t mask, uint8_t start_bit)
-{
-	uint8_t data;
-
-	if (CMB_SPIReadByte(spiSettings, addr, &data) != COMMONERR_OK)
-		return(COMMONERR_FAILED);
-
-	data = (data & ~mask) | ((field_val << start_bit) & mask);
-
-	if (CMB_SPIWriteByte(spiSettings, addr, data) != COMMONERR_OK)
-		return(COMMONERR_FAILED);
-
-	return(COMMONERR_OK);
-}
-
-/* read a field in a single register space (not multibyte fields) */
-commonErr_t CMB_SPIReadField(spiSettings_t *spiSettings, uint16_t addr,
-			     uint8_t *field_val, uint8_t mask, uint8_t start_bit)
-{
-	uint8_t data;
-
-	if (CMB_SPIReadByte(spiSettings, addr, &data) != COMMONERR_OK)
-		return(COMMONERR_FAILED);
-
-	data = (data & mask) >> start_bit;
-	*field_val = data;
-
-	return(COMMONERR_OK);
-}
-
-
-commonErr_t CMB_writeToLog(ADI_LOGLEVEL level, uint8_t deviceIndex,
-			   uint32_t errorCode, const char *comment)
-{
-
-	if((CMB_LOGLEVEL & ADIHAL_LOG_ERROR) && (level == ADIHAL_LOG_ERROR)) {
-		printf("ERROR: %d: %s", (int)errorCode, comment);
-	} else if((CMB_LOGLEVEL & ADIHAL_LOG_WARNING)
-		  && (level == ADIHAL_LOG_WARNING)) {
-		printf("WARNING: %d: %s",(int)errorCode, comment);
-	} else if((CMB_LOGLEVEL & ADIHAL_LOG_MESSAGE)
-		  && (level == ADIHAL_LOG_MESSAGE)) {
-		printf("MESSAGE: %d: %s",(int)errorCode, comment);
-	} else if(CMB_LOGLEVEL == ADIHAL_LOG_NONE ) {
-		//printf("MESSAGE: %d: %s",(int)errorCode, comment);
-	} else {
-		printf("Undefined Log Level: 0x%X", level);
-	}
-
-	return(COMMONERR_OK);
-}
-
-/* if filename null, a default path will be used in logging.c */
-commonErr_t CMB_openLog(const char *filename)
-{
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_closeLog(void)
-{
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_flushLog(void)
-{
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_wait_ms(uint32_t time_ms)
-{
-	mdelay(time_ms);
-
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_wait_us(uint32_t time_us)
-{
-	udelay(time_us);
-
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_setTimeout_ms(uint32_t timeOut_ms)
-{
-#ifdef _XPARAMETERS_PS_H_
-	_desired_time_to_elapse_us = timeOut_ms * 1000;
-#else
-	_desired_time_to_elapse_us = timeOut_ms * 50;	// FIXME
-#endif
-
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_setTimeout_us(uint32_t timeOut_us)
-{
-	_desired_time_to_elapse_us = timeOut_us;
-
-	return(COMMONERR_OK);
-}
-
-
-commonErr_t CMB_hasTimeoutExpired()
-{
-	udelay(1);
-
-	_desired_time_to_elapse_us--;
-	if (_desired_time_to_elapse_us > 0)
-		return(COMMONERR_OK);
-
-	return(COMMONERR_FAILED);
-}
-
-commonErr_t CMB_regRead(uint32_t offset, uint32_t *data)
-{
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_regWrite(uint32_t offset, uint32_t data)
-{
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_memRead(uint32_t offset, uint32_t *data, uint32_t len)
-{
-	return(COMMONERR_OK);
-}
-
-commonErr_t CMB_memWrite(uint32_t offset, uint32_t *data, uint32_t len)
-{
-	return(COMMONERR_OK);
-}
@@ -1,131 +0,0 @@
-/**
- * \file common.h
- * \brief Contains type definitions and prototype declarations for common.c
- */
-
-/**
-* \page Disclaimer Legal Disclaimer
-* Copyright 2015-2017 Analog Devices Inc.
-* Released under the AD9371 API license, for more information see the "LICENSE.txt" file in this zip file.
-*
-*/
-
-#ifndef _COMMON_H_
-#define _COMMON_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* build project settings include the path to the desired platform folder for correct includes */
-#include "stdint.h"
-
-#define THROW_ERROR()
-
-#define SPIARRAYSIZE 1024
-
-/* assuming 3 byte SPI message - integer math enforces floor() */
-#define SPIARRAYTRIPSIZE ((SPIARRAYSIZE / 3) * 3)
-
-/*========================================
- * Enums and structures
- *=======================================*/
-/* proposed to increase number of error return values to make unique for each return */
-typedef enum
-{
-    ADIERR_OK=0,
-    ADIERR_INV_PARM,
-    ADIERR_FAILED
-} ADI_ERR;
-
-/*!< \brief COMMON layer error reporting enumerated types */
-typedef enum
-{
-    COMMONERR_OK=0,
-    COMMONERR_FAILED
-} commonErr_t;
-
-/* bit 0 is MESSAGE, bit 1 is WARNING, bit 2 is ERROR */
-typedef enum
-{
-    ADIHAL_LOG_NONE    = 0x0,
-    ADIHAL_LOG_MESSAGE = 0x1,
-    ADIHAL_LOG_WARNING = 0x2,
-    ADIHAL_LOG_ERROR   = 0x4,
-	ADIHAL_LOG_SPI     = 0x8,
-	ADIHAL_LOG_AXI_REG = 0x10,
-	ADIHAL_LOG_AXI_MEM = 0x20,
-	ADIHAL_LOG_ALL     = 0x3F
-} ADI_LOGLEVEL;
-
-/**
- * \brief Data structure to hold SPI settings for all system device types
- */
-typedef struct
-{
-	uint8_t chipSelectIndex;        ///< valid 1~8
-	uint8_t writeBitPolarity;       ///< the level of the write bit of a SPI write instruction word, value is inverted for SPI read operation
-	uint8_t longInstructionWord;    ///< 1 = 16bit instruction word, 0 = 8bit instruction word
-	uint8_t MSBFirst;               ///< 1 = MSBFirst, 0 = LSBFirst
-	uint8_t CPHA;                   ///< clock phase, sets which clock edge the data updates (valid 0 or 1)
-	uint8_t CPOL;                   ///< clock polarity 0 = clock starts low, 1 = clock starts high
-    uint8_t enSpiStreaming;         ///< Not implemented. SW feature to improve SPI throughput.
-    uint8_t autoIncAddrUp;          ///< Not implemented. For SPI Streaming, set address increment direction. 1= next addr = addr+1, 0:addr = addr-1
-    uint8_t fourWireMode;           ///< 1: Use 4-wire SPI, 0: 3-wire SPI (SDIO pin is bidirectional). NOTE: ADI's FPGA platform always uses 4-wire mode.
-    uint32_t spiClkFreq_Hz;         ///< SPI Clk frequency in Hz (default 25000000), platform will use next lowest frequency that it's baud rate generator can create */
-
-} spiSettings_t;
-
-/* global variable so application layer can set the log level */
-extern ADI_LOGLEVEL CMB_LOGLEVEL;
-extern struct spi_desc 	*spi_ad_desc;
-extern struct gpio_desc	*gpio_ad9371_resetb;
-extern struct gpio_desc	*gpio_ad9528_resetb;
-extern struct gpio_desc	*gpio_ad9528_sysref_req;
-
-/* initialize hardware platform */
-commonErr_t CMB_initPlatform(void);
-
-/* close hardware pointers */
-commonErr_t CMB_closeHardware(void);
-
-/* GPIO function */
-commonErr_t CMB_setGPIO(uint32_t GPIO);
-
-/* hardware reset function */
-commonErr_t CMB_hardReset(uint8_t spiChipSelectIndex);
-
-/* SPI read/write functions */
-commonErr_t CMB_setSPIOptions(spiSettings_t *spiSettings); /* allows the platform HAL to work with devices with various SPI settings */
-commonErr_t CMB_setSPIChannel(uint16_t chipSelectIndex );  /* value of 0 deasserts all chip selects */
-commonErr_t CMB_SPIWriteByte(spiSettings_t *spiSettings, uint16_t addr, uint8_t data); /* single SPI byte write function */
-commonErr_t CMB_SPIWriteBytes(spiSettings_t *spiSettings, uint16_t *addr, uint8_t *data, uint32_t count);
-commonErr_t CMB_SPIReadByte (spiSettings_t *spiSettings, uint16_t addr, uint8_t *readdata); /* single SPI byte read function */
-commonErr_t CMB_SPIWriteField(spiSettings_t *spiSettings, uint16_t addr, uint8_t  field_val, uint8_t mask, uint8_t start_bit); /* write a field in a single register */
-commonErr_t CMB_SPIReadField (spiSettings_t *spiSettings, uint16_t addr, uint8_t *field_val, uint8_t mask, uint8_t start_bit);	/* read a field in a single register */
-
-/* platform timer functions */
-commonErr_t CMB_wait_ms(uint32_t time_ms);
-commonErr_t CMB_wait_us(uint32_t time_us);
-commonErr_t CMB_setTimeout_ms(uint32_t timeOut_ms);
-commonErr_t CMB_setTimeout_us(uint32_t timeOut_us);
-commonErr_t CMB_hasTimeoutExpired();
-
-/* platform logging functions */
-commonErr_t CMB_openLog(const char *filename);
-commonErr_t CMB_closeLog(void);
-commonErr_t CMB_writeToLog(ADI_LOGLEVEL level, uint8_t deviceIndex, uint32_t errorCode, const char *comment);
-commonErr_t CMB_flushLog(void);
-
-/* platform FPGA AXI register read/write functions */
-commonErr_t CMB_regRead(uint32_t offset, uint32_t *data);
-commonErr_t CMB_regWrite(uint32_t offset, uint32_t data);
-
-/* platform DDR3 memory read/write functions */
-commonErr_t CMB_memRead(uint32_t offset, uint32_t *data, uint32_t len);
-commonErr_t CMB_memWrite(uint32_t offset, uint32_t *data, uint32_t len);
-
-#ifdef __cplusplus
-}
-#endif
-#endif
@@ -1,348 +0,0 @@
-/*
- * headless.h
- *
- *  Created on: 2021Äê6ÔÂ8ÈÕ
- *      Author: Josh
- */
-
-#ifndef SRC_HEADLESS_H_
-#define SRC_HEADLESS_H_
-
-/***************************** Include Files ********************************/
-#include <stdlib.h>
-#include <stdio.h>
-#include "xil_cache.h"
-#include "xscugic.h"
-//#include "xgpio.h"
-
-#include "common.h"
-#include "./mykonos/ad9528.h"
-#include "./mykonos/mykonos.h"
-#include "./mykonos/Mykonos_M3.h"
-#include "./mykonos/mykonos_gpio.h"
-#include "myk_ad9528init.h"
-#include "myk_init.h"
-
-#include "parameters.h"
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/*
-*
-* This function setups ad9528 and ad9371 via spi.
-*
-* @param	None.
-*
-* @return
-*       - ADIERR_FAILED if successful,
-*       - ADIERR_OK if not succesful
-*
-* @note     None.
-*
-******************************************************************************/
-int HARDWARE_initialize();
-
-int HARDWARE_ad9371Config(void);
-
-/*****************************************************************************/
-/*
-*
-* Setup up Axi Gpio, through which ad9371 can be reconfigured. Axi Gpio
-* instance and interrupt system initialization are included.
-*
-* @param	None.
-*
-* @return
-*       - ADIERR_FAILED if successful,
-*       - ADIERR_OK if not succesful
-*
-* @note     None.
-*
-******************************************************************************/
-int HW_ad9371DynamicCfgInit(void);
-
-/*****************************************************************************/
-/*
-*
-* Setup up interrupt system, initialize exception handlers.
-*
-* @param	DeviceId is the unique identifier for a device.
-* @param	GicPtr is a pointer to the XScuGic instance.
-*
-* @return
-*       - XST_SUCCESS if successful,
-*       - XST_FAILURE if not succesful
-*
-* @note     None.
-*
-******************************************************************************/
-int HW_setupIntrSystem(u16 DeviceId, XScuGic * GicPtr);
-
-/*****************************************************************************/
-/*
-*
-* Make the connection between the Int_Id of the interrupt source and the
-* associated handler. Set the interrupt priority and trigger type  for the
-* specified IRQ source..
-*
-* @param	GicPtr is a pointer to the XScuGic instance.
-* @param	Int_Id contains the ID of the interrupt source and should be
-*		in the range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
-* @param	Handler to the handler for that interrupt.
-* @param	CallBackRef is the callback reference, usually the instance
-*		pointer of the connecting driver.
-* @param	Priority is the new priority for the IRQ source. 0 is highest
-*           priority, 0xF8(248) is lowest. There are 32 priority levels
-*           supported with a step of 8. Hence the supported priorities are
-*           0, 8, 16, 32, 40 ..., 248.
-* @param	Trigger is the new trigger type for the IRQ source.
-* Each bit pair describes the configuration for an INT_ID.
-* SFI    Read Only    b10 always
-* PPI    Read Only    depending on how the PPIs are configured.
-*                    b01    Active HIGH level sensitive
-*                    b11 Rising edge sensitive
-* SPI                LSB is read only.
-*                    b01    Active HIGH level sensitive
-*                    b11 Rising edge sensitive/
-*
-* @return
-*       - XST_SUCCESS if successful,
-*       - XST_FAILURE if not succesful
-*
-* @note     None.
-*
-******************************************************************************/
-int HW_connectIntr(XScuGic *GicPtr,u32 IntrId,Xil_InterruptHandler Handler,
-		void *CallBackRef, u8 Priority, u8 Trigger);
-
-/*****************************************************************************/
-/*
-*
-* Initialize Analog Device related configuration profile. This is a HARDWARE-
-* ASSOTIATED function, which may differ between different board.
-*
-* @param	None.
-*
-* @return
-*       - ADIERR_OK if configuration profile exists,
-*       - ADIERR_FAILED if onfiguration profile does not exist
-*
-* @note     None.
-*
-******************************************************************************/
-int HW_adiCfgProfileInit(void);
-
-/******************************************************************************/
-/**
-*
-* This function conducts AD9528 device configuration initializing procedure.
-*
-* @param	clockAD9528_device is a pointer to the data structure holding
-* 			AD9528 settings, which contains basic AD9528 settings such as
-* 			spi and gpio.
-*
-* @return
-*       - ADIERR_OK if successful.
-*       - ADIERR_FAILED if not successful.
-*
-* @note		None.
-*
-*******************************************************************************/
-int HW_9528Config(ad9528Device_t *clockAD9528_device);
-
-/******************************************************************************/
-/**
-*
-* This function read AD9528 reg508 status, to check whether ad9528 is locked or
-* not.
-*
-* @param	clockAD9528_device is a pointer to the data structure holding
-* 			AD9528 settings, which contains basic AD9528 settings.
-*
-* @return
-*       - ADIERR_OK if successful.
-*       - ADIERR_FAILED if not successful.
-*
-* @note		None.
-*
-*******************************************************************************/
-int HW_9528GetLockStatus(ad9528Device_t *device, uint8_t *reg508);
-
-/******************************************************************************/
-/**
-*
-* Conduct AD9371 device configuration initializing procedure.
-*
-* @param	clockAD9528_device is a pointer to the data structure holding
-* 			AD9528 settings, which contains basic AD9528 settings.
-* @param	mykDevice is ADI hardware layer settings pointer specific to
-* 			a Mykonos instance which contains basic settings such as spi,
-* 			gpio, tx/rx and jesd configurations.
-*
-* @return
-*       - ADIERR_OK if successful.
-*       - ADIERR_FAILED if not successful.
-*
-* @note		None.
-*
-*******************************************************************************/
-int HW_9371Config(ad9528Device_t *clockAD9528_device, mykonosDevice_t *mykDevice);
-
-/******************************************************************************/
-/**
-*
-* Read AD9371's RX framer, ORX framer and TX deframer status, to check jesd204b
-* sync status.
-*
-* @param	mykDevice is ADI hardware layer settings pointer specific to
-* 			a Mykonos instance which contains basic settings such as spi,
-* 			gpio, tx/rx and jesd configurations.
-* @param	framerStatus is the RX framer status byte read
-* framerStatus |  Description
-* -------------|-----------------------------------------------------------------------------
-*         [7]  | SYSREF phase error ? a new SYSREF had different timing than the first that set the LMFC timing.
-*         [6]  | Framer lane FIFO read/write pointer delta has changed.  Can help debug issues with deterministic latency.
-*         [5]  | Framer has received the SYSREF and has retimed its LMFC
-*       [4:2]  | Framer ILAS state: 0=CGS, 1= 1st Multframe, 2= 2nd Multiframe, 3= 3rd Multiframe, 4= 4th multiframe, 5= Last multiframe, 6=invalid, 7= ILAS complete
-*       [1:0]  | Framer Tx state: 0=CGS, 1= ILAS, 2 = ADC Data
-* @param	obsFramerStatus is the ORX framer status byte read
-* obsFramerStatus |  Description
-* ----------------|-----------------------------------------------------------------------------
-*            [7]  | SYSREF phase error ? a new SYSREF had different timing than the first that set the LMFC timing.
-*            [6]  | Framer lane FIFO read/write pointer delta has changed.  Can help debug issues with deterministic latency.
-*            [5]  | Framer has received the SYSREF and has retimed its LMFC
-*          [4:2]  | Framer ILAS state: 0=CGS, 1= 1st Multframe, 2= 2nd Multiframe, 3= 3rd Multiframe, 4= 4th multiframe, 5= Last multiframe, 6=invalid, 7= ILAS complete
-*          [1:0]  | Framer Tx state: 0=CGS, 1= ILAS, 2 = ADC Data
-* @param	deframerStatus  is the TX deframer status byte read
-* deframerStatus  |  Bit Name                |  Description
-* ----------------|--------------------------|---------------------------------------------
-*            [7]  | Unused                   | Unused
-*            [6]  | Deframer IRQ             | This bit indicates that the IRQ interrupt was asserted.
-*            [5]  | Deframer SYSREF Received | When this bit is set, it indicates that the SYSREF pulse was received by the deframer IP
-*            [4]  | Deframer Receiver Error  | This bit is set when PRBS has received an error.
-*            [3]  | Valid Checksum           | This bit is set when the received ILAS checksum is valid.
-*            [2]  | EOF Event                | This bit captures the internal status of the framer End of Frame event. Value =1 if framing error during ILAS
-*            [1]  | EOMF Event               | This bit captures the internal status of the framer End of Multi-Frame event. Value =1 if framing error during ILAS
-*            [0]  | FS Lost                  | This bit captures the internal status of the framer Frame Symbol event. Value =1 if framing error during ILAS or user data (invalid replacement characters)
-*
-* @return
-*       - ADIERR_OK if successful.
-*       - ADIERR_FAILED if not successful.
-*
-* @note		None.
-*
-*******************************************************************************/
-int HW_9371CheckJesdStatus(mykonosDevice_t *mykDevice, uint8_t *framerStatus,
-		uint8_t *obsFramerStatus, uint8_t *deframerStatus);
-
-/******************************************************************************/
-/**
-*
-* This function conducts AD9371/9375 samll RF PLL frequcny change procedure. The
-* procedure is performed as follows:
-*	1. Move the device into the radio off state.
-*	2. Program the new local oscillator (LO) frequency.
-*	3. Reset the external channel.(ignored)
-* 	4. Move the device back into the radio on state.
-*	5. Reenable tracking calibrations.(ignored)
-*
-* @param	mykDevice is ADI hardware layer settings pointer specific to
-* 			a Mykonos instance which contains basic settings such as spi,
-* 			gpio, tx/rx and jesd configurations.
-* @param	freq_Hz is the target frequancy in Hz.
-*
-* @return	None.
-*
-* @note		The procedure is used when a radio frequency (RF) phased-lock loop
-*		(PLL) change is required with the following conditions:
-*		- A desire to change the Rx, Tx, and ORx frequencies.
-* 		- The frequency step change is less than 100 MHz.
-* 		- The frequency step does not cross the divide by 2 boundaries outlined
-*			in AD9371/9375-UG-992-Rev.B-Table 96.
-*
-*******************************************************************************/
-int HW_9371SmallFrequencyChange(mykonosDevice_t *mykDevice, uint64_t freq_Hz);
-
-/******************************************************************************/
-/**
-*
-* This function conducts AD9371/9375 large RF PLL frequcny change procedure. The
-* procedure is performed as follows:
-*	1. Move the device into the radio off state.
-*	2. Program the new local oscillator (LO) frequency.
-*	3. Rerun the initialization calibrations.
-* 	4. Move the device back into the radio on state.
-*	5. Reenable tracking calibrations.(ignored)
-*
-* @param	mykDevice is ADI hardware layer settings pointer specific to
-* 			a Mykonos instance which contains basic settings such as spi,
-* 			gpio, tx/rx and jesd configurations.
-* @param	freq_Hz is the target frequancy in Hz.
-*
-* @return	None.
-*
-* @note		The procedure is used when a radio frequency (RF) phased-lock loop
-*		(PLL) change is required with the following conditions:
-*		- A desire to change the Rx, Tx, and ORx frequencies.
-* 		- The frequency step change is more than 100 MHz.
-* 		- The frequency step does cross the divide by 2 boundaries outlined
-*			in AD9371/9375-UG-992-Rev.B-Table 96.
-*
-*******************************************************************************/
-int HW_9371LargeFrequencyChange(mykonosDevice_t *mykDevice, uint64_t freq_Hz);
-
-/******************************************************************************/
-/**
-*
-* Handles AD9371 TX & RX frequency change axi gpio interruput.
-*
-* @param	CallBackRef is the callback reference, usually the instance
-*		pointer of the connecting driver.
-*
-* @return	None.
-*
-* @note		None.
-*
-*******************************************************************************/
-void FreqIntrHandler(void *CallbackRef);
-
-/******************************************************************************/
-/**
-*
-* Handles AD9371 Rx gain index change axi gpio interruput.
-*
-* @param	CallBackRef is the callback reference, usually the instance
-*		pointer of the connecting driver.
-*
-* @return	None.
-*
-* @note		None.
-*
-*******************************************************************************/
-void GainIntrHandler(void *CallbackRef);
-
-/******************************************************************************/
-/**
-*
-* Handles AD9371 Tx attenuation change axi gpio interruput.
-*
-* @param	CallBackRef is the callback reference, usually the instance
-*		pointer of the connecting driver.
-*
-* @return	None.
-*
-* @note		None.
-*
-*******************************************************************************/
-void AttnIntrHandler(void *CallbackRef);
-
-#endif /* SRC_HEADLESS_H_ */
@@ -1,189 +0,0 @@
-///*
-// * myk_clock_init.c
-// *
-// */
-//
-///**
-//* \page Disclaimer Legal Disclaimer
-//* Copyright 2015-2017 Analog Devices Inc.
-//* Released under the AD9371 API license, for more information see the "LICENSE.txt" file in this zip file.
-//*
-//*/
-//
-//#ifndef MYK_CLOCK_INIT_C_
-//#define MYK_CLOCK_INIT_C_
-//#include <stdint.h>
-//#include <stdlib.h>
-//#include <stddef.h>
-//#include "common.h"
-//
-//#include "ad9528.h"
-//#include "t_ad9528.h"
-//#include "myk_ad9528init.h"
-//#include "parameters.h"
-//
-//static ad9528pll1Settings_t clockPll1Settings =
-//{
-//	.refA_Frequency_Hz  = 30720000,
-//	.refA_Divider       = 1,
-//	.refA_bufferCtrl    = DISABLED,
-//	.refB_Frequency_Hz  = 0,
-//	.refB_Divider       = 1,
-//	.refB_bufferCtrl    = DISABLED,
-//	.vcxo_Frequency_Hz  = 122880000,
-//	.vcxoBufferCtrl     = NEG_SINGLE_ENDED,
-//	.nDivider           = 4,
-//	.bypassPll1			= 0
-//};
-//
-//static ad9528pll2Settings_t clockPll2Settings =
-//{
-//	.rfDivider = 4,
-//	.n2Divider = 10,
-//	.totalNdiv = 30
-//};
-//
-//static ad9528outputSettings_t clockOutputSettings =
-//{
-//	.outPowerDown 		= 53237, // 0xCFF5
-//	.outSource 			= {
-//			CHANNEL_DIV, CHANNEL_DIV, CHANNEL_DIV, SYSREF,
-//			CHANNEL_DIV, CHANNEL_DIV, CHANNEL_DIV, CHANNEL_DIV,
-//			CHANNEL_DIV, CHANNEL_DIV, CHANNEL_DIV, CHANNEL_DIV,
-//			SYSREF,		 CHANNEL_DIV},
-//	.outBufferCtrl  	= {0,0,0,0,0,0,0,0,0,0,0,0,0,0},
-//	.outAnalogDelay 	= {0,0,0,0,0,0,0,0,0,0,0,0,0,0},
-//	.outDigitalDelay 	= {0,0,0,0,0,0,0,0,0,0,0,0,0,0},
-//	.outChannelDiv 		= {10,10,10,10,10,10,10,10,10,10,10,10,10,10},
-//	.outFrequency_Hz 	= {122880000, 122880000, 122880000, 122880000, 122880000, 122880000, 122880000, 122880000, 122880000, 122880000, 122880000, 122880000, 122880000, 122880000}
-//};
-//
-//static ad9528sysrefSettings_t clockSysrefSettings =
-//{
-//	.sysrefRequestMethod    = PIN,
-//	.sysrefSource           = INTERNAL,
-//	.sysrefPinEdgeMode      = LEVEL_ACTIVE_HIGH,
-//	.sysrefPinBufferMode    = DISABLED,
-//	.sysrefPatternMode      = NSHOT,
-//	.sysrefNshotMode        = ONE_PULSE,
-//	.sysrefDivide           = 512
-//};
-//
-//static spiSettings_t clockSpiSettings =
-//{
-//	.chipSelectIndex        = AD9528_CS, //chip select Index
-//	.writeBitPolarity       = 0, //Write bit polarity
-//	.longInstructionWord    = 1, //16bit instruction word
-//	.MSBFirst               = 1, //MSB first
-//	.CPHA                   = 0, //Clock phase
-//	.CPOL                   = 0, //Clock polarity
-//	.enSpiStreaming         = 0, //uint8_t enSpiStreaming;
-//	.autoIncAddrUp          = 1, //uint8_t autoIncAddrUp;
-//	.fourWireMode           = 1  //uint8_t fourWireMode;
-//};
-//
-//ad9528Device_t clockAD9528_ =
-//{
-//	&clockSpiSettings,
-//	&clockPll1Settings,
-//	&clockPll2Settings,
-//	&clockOutputSettings,
-//	&clockSysrefSettings
-//};
-//
-//ad9528Device_t *ad9528Init = &clockAD9528_;
-//
-//#endif /* MYK_CLOCK_INIT_C_ */
-
-
-/* AD9528 data structure initialization file */
-#include <stdint.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include "common.h"
-
-#include "./mykonos/ad9528.h"
-#include "./mykonos/t_ad9528.h"
-#include "myk_ad9528init.h"
-#include "parameters.h"
-
-static ad9528pll1Settings_t clockPll1Settings = {
-    .refA_Frequency_Hz  = 122880000,
-    .refA_Divider       = 1,
-    .refA_bufferCtrl    = SINGLE_ENDED,
-    .refB_Frequency_Hz  = 0,
-    .refB_Divider       = 1,
-    .refB_bufferCtrl    = DISABLED,
-    .vcxo_Frequency_Hz  = 122880000,
-    .vcxoBufferCtrl     = DIFFERENTIAL,
-    .nDivider           = 1,
-	.bypassPll1 		= 0
-};
-
-static ad9528pll2Settings_t clockPll2Settings = {
-    .rfDivider = 3,
-    .n2Divider = 10,
-    .totalNdiv = 30
-};
-
-/*******************************************************************
- * Output Distribution Settings
- * 9369CE02A uses the following clock outputs
- * OUT 1: FPGA_REF_CLK
- * OUT 2: FPGA_AUX_CLK
- * OUT 3: FPGA_SYSREF
- * OUT 12: SYSREF_IN
- * OUT 13: DEV_CLK_IN
- *******************************************************************
- */
-static ad9528outputSettings_t clockOutputSettings = {
-    .outPowerDown       = 0x0,
-    .outSource          = {
-    	SYSREF,      SYSREF,      CHANNEL_DIV, SYSREF,
-    	CHANNEL_DIV, CHANNEL_DIV, SYSREF,      SYSREF,
-    	CHANNEL_DIV, CHANNEL_DIV, CHANNEL_DIV, CHANNEL_DIV,
-    	SYSREF     , CHANNEL_DIV
-    },
-    .outBufferCtrl      = {0,0,0,0,0,0,0,0,0,0,0,0,0,0},
-    .outAnalogDelay     = {0,0,0,0,0,0,0,0,0,0,0,0,0,0},
-    .outDigitalDelay    = {0,0,0,0,0,0,0,0,0,0,0,0,0,0},
-    .outChannelDiv      = {10,10,10,10,10,10,10,10,10,10,10,10,10,10},
-    .outFrequency_Hz    = {
-    		122880000, 122880000, 122880000, 122880000,
-			122880000, 122880000, 122880000, 122880000,
-			122880000, 122880000, 122880000, 122880000,
-			122880000, 122880000
-    }
-};
-
-static ad9528sysrefSettings_t clockSysrefSettings = {
-    .sysrefRequestMethod    = SPI,
-    .sysrefSource           = INTERNAL,
-    .sysrefPinEdgeMode      = LEVEL_ACTIVE_HIGH,
-    .sysrefPinBufferMode    = DISABLED,
-    .sysrefPatternMode      = CONTINUOUS,
-    .sysrefNshotMode        = FOUR_PULSES,
-    .sysrefDivide           = 512
-};
-
-static spiSettings_t clockSpiSettings = {
-    .chipSelectIndex        = 2, //chip select Index
-    .writeBitPolarity       = 0, //Write bit polarity
-    .longInstructionWord    = 1, //16bit instruction word
-    .MSBFirst               = 1, //MSB first
-    .CPHA                   = 0, //Clock phase
-    .CPOL                   = 0, //Clock polarity
-    .enSpiStreaming         = 0, //uint8_t enSpiStreaming;
-    .autoIncAddrUp          = 1, //uint8_t autoIncAddrUp;
-    .fourWireMode           = 1  //uint8_t fourWireMode;
-};
-
-ad9528Device_t clockAD9528_ = {
-    &clockSpiSettings,
-    &clockPll1Settings,
-    &clockPll2Settings,
-    &clockOutputSettings,
-    &clockSysrefSettings
-};
-
-ad9528Device_t *ad9528Init = &clockAD9528_;
@@ -1,20 +0,0 @@
-/*
- * myk_clock_init.h
- *
- */
-
-/**
-* \page Disclaimer Legal Disclaimer
-* Copyright 2015-2017 Analog Devices Inc.
-* Released under the AD9371 API license, for more information see the "LICENSE.txt" file in this zip file.
-*
-*/
-
-#ifndef MYK_CLOCK_INIT_H_
-#define MYK_CLOCK_INIT_H_
-
-#include "./mykonos/ad9528.h"
-
-extern ad9528Device_t *ad9528Init;
-
-#endif /* MYK_CLOCK_INIT_H_ */
@@ -1,558 +0,0 @@
-/**
- * \file myk_init.c
- *
- * \brief Contains init setting structure declarations for the _instance API
- *
- * The top level structure mykonosDevice_t mykDevice uses keyword
- * extern to allow the application layer main() to have visibility
- * to these settings.
- *
- * All data structures required for operation have been initialized with values which reflect
- * these settings:
- *
- * Device Clock = $122.88$ Mhz
- * Rx enabled channels = $2$
- * Tx enabled channels = $2$
- *
- * Mykonos Framer:
- * Lane Rate = $4915.2$ Mbs
- * L = $2$
- * K = $32$
- * M = $4$
- * F = $4$
- *
- * Mykonos Deframer:
- * Lane Rate = $4915.2$ Mbs
- * L = $2$
- * K = $32$
- * M = $4$
- * F = $4$
- *
- * Mykonos Observation framer:
- * Lane Rate = $4915.2$ Mbs
- * L = $2$
- * K = $32$
- * M = $4$
- * F = $4$
- *
- * Using these profiles:
- * $Rx 100Mhz, IQrate 122.88Mhz, Dec5$
- * $Tx 100/100Mhz, IQrate 122.88Mhz, Dec5$
- * $ORX 100Mhz, IQrate 122.88Mhz, Dec5$
- * $SRx 20Mhz, IQrate 30.72Mhz, Dec5$
- *
- */
-
-/**
-* \page Disclaimer Legal Disclaimer
-* Copyright 2015-2017 Analog Devices Inc.
-* Released under the AD9371 API license, for more information see the "LICENSE.txt" file in this zip file.
-*
-*/
-
-#include <stddef.h>
-#include "./mykonos/t_mykonos.h"
-#include "myk_init.h"
-#include "parameters.h"
-#include "./mykonos/mykonos_gpio.h"
-
-static int16_t txFirCoefs[] = {-94,-26,282,177,-438,-368,756,732,-1170,-1337,1758,2479,-2648,-5088,4064,16760,16759,4110,-4881,-2247,2888,1917,-1440,-1296,745,828,-358,-474,164,298,-16,-94};
-
-static mykonosFir_t txFir =
-{
-    6,              /* Filter gain in dB*/
-    32,             /* Number of coefficients in the FIR filter*/
-    &txFirCoefs[0]  /* A pointer to an array of filter coefficients*/
-};
-
-static int16_t rxFirCoefs[] = {-20,6,66,22,-128,-54,240,126,-402,-248,634,444,-956,-756,1400,1244,-2028,-2050,2978,3538,-4646,-7046,9536,30880,30880,9536,-7046,-4646,3538,2978,-2050,-2028,1244,1400,-756,-956,444,634,-248,-402,126,240,-54,-128,22,66,6,-20};
-
-static mykonosFir_t rxFir =
-{
-    -6,             /* Filter gain in dB*/
-    48,             /* Number of coefficients in the FIR filter*/
-    &rxFirCoefs[0]  /* A pointer to an array of filter coefficients*/
-};
-
-static int16_t obsrxFirCoefs[] = {-14,-19,44,41,-89,-95,175,178,-303,-317,499,527,-779,-843,1184,1317,-1781,-2059,2760,3350,-4962,-7433,9822,32154,32154,9822,-7433,-4962,3350,2760,-2059,-1781,1317,1184,-843,-779,527,499,-317,-303,178,175,-95,-89,41,44,-19,-14};
-static mykonosFir_t obsrxFir =
-{
-    -6,             /* Filter gain in dB*/
-    48,             /* Number of coefficients in the FIR filter*/
-    &obsrxFirCoefs[0]/* A pointer to an array of filter coefficients*/
-};
-
-static int16_t snifferFirCoefs[] = {-1,-5,-14,-23,-16,24,92,137,80,-120,-378,-471,-174,507,1174,1183,98,-1771,-3216,-2641,942,7027,13533,17738,17738,13533,7027,942,-2641,-3216,-1771,98,1183,1174,507,-174,-471,-378,-120,80,137,92,24,-16,-23,-14,-5,-1};
-static mykonosFir_t snifferRxFir=
-{
-    -6,             /* Filter gain in dB*/
-    48,             /* Number of coefficients in the FIR filter*/
-    &snifferFirCoefs[0]/* A pointer to an array of filter coefficients*/
-};
-
-static mykonosJesd204bFramerConfig_t rxFramer =
-{
-    0,              /* JESD204B Configuration Bank ID -extension to Device ID (Valid 0..15)*/
-    0,              /* JESD204B Configuration Device ID - link identification number. (Valid 0..255)*/
-    0,              /* JESD204B Configuration starting Lane ID.  If more than one lane used, each lane will increment from the Lane0 ID. (Valid 0..31)*/
-    4,              /* number of ADCs (0, 2, or 4) - 2 ADCs per receive chain*/
-    32,             /* number of frames in a multiframe (default=32), F*K must be a multiple of 4. (F=2*M/numberOfLanes)*/
-    0,              /* scrambling off if framerScramble= 0, if framerScramble>0 scramble is enabled.*/
-    1,              /* 0=use internal SYSREF, 1= use external SYSREF*/
-    0x03,           /* serializerLanesEnabled - bit per lane, [0] = Lane0 enabled, [1] = Lane1 enabled*/
-    0xE4,           /* serializerLaneCrossbar*/
-    22,             /* serializerAmplitude - default 22 (valid (0-31)*/
-    4,              /* preEmphasis - < default 4 (valid 0 - 7)*/
-    0,              /* invertLanePolarity - default 0 ([0] will invert lane [0], bit1 will invert lane1)*/
-    0,              /* lmfcOffset - LMFC_Offset offset value for deterministic latency setting*/
-    0,              /* Flag for determining if SYSREF on relink should be set. Where, if > 0 = set, 0 = not set*/
-    0,              /* Flag for determining if auto channel select for the xbar should be set. Where, if > 0 = set, '0' = not set*/
-    0,              /* Selects SYNCb input source. Where, 0 = use RXSYNCB for this framer, 1 = use OBSRX_SYNCB for this framer*/
-    0,              /* Flag for determining if CMOS mode for RX Sync signal is used. Where, if > 0 = CMOS, '0' = LVDS*/
-    0,              /* Selects framer bit repeat or oversampling mode for lane rate matching. Where, 0 = bitRepeat mode (changes effective lanerate), 1 = overSample (maintains same lane rate between ObsRx framer and Rx framer and oversamples the ADC samples)*/
-    0               /* Flag for determining if API will calculate the appropriate settings for framer lane outputs to physical lanes. Where, if '0' = API will set automatic lane crossbar, '1' = set to manual mode and the value in serializerLaneCrossbar will be used*/
-};
-
-static mykonosJesd204bFramerConfig_t obsRxFramer =
-{
-    0,              /* JESD204B Configuration Bank ID -extension to Device ID (Valid 0..15)*/
-    0,              /* JESD204B Configuration Device ID - link identification number. (Valid 0..255)*/
-    0,              /* JESD204B Configuration starting Lane ID.  If more than one lane used, each lane will increment from the Lane0 ID. (Valid 0..31)*/
-    2,              /* number of ADCs (0, 2, or 4) - 2 ADCs per receive chain*/
-    32,             /* number of frames in a multiframe (default=32), F*K must be a multiple of 4. (F=2*M/numberOfLanes)*/
-    0,              /* scrambling off if framerScramble= 0, if framerScramble>0 scramble is enabled.*/
-    1,              /* 0=use internal SYSREF, 1= use external SYSREF*/
-    0x04,           /* serializerLanesEnabled - bit per lane, [0] = Lane0 enabled, [1] = Lane1 enabled*/
-    0xE4,           /* Lane crossbar to map framer lane outputs to physical lanes*/
-    22,             /* serializerAmplitude - default 22 (valid (0-31)*/
-    4,              /* preEmphasis - < default 4 (valid 0 - 7)*/
-    0,              /* invertLanePolarity - default 0 ([0] will invert lane [0], bit1 will invert lane1)*/
-    0,              /* lmfcOffset - LMFC_Offset offset value for deterministic latency setting*/
-    0,              /* Flag for determining if SYSREF on relink should be set. Where, if > 0 = set, 0 = not set*/
-    0,              /* Flag for determining if auto channel select for the xbar should be set. Where, if > 0 = set, '0' = not set*/
-    1,              /* Selects SYNCb input source. Where, 0 = use RXSYNCB for this framer, 1 = use OBSRX_SYNCB for this framer*/
-    0,              /* Flag for determining if CMOS mode for RX Sync signal is used. Where, if > 0 = CMOS, '0' = LVDS*/
-    0,              /* Selects framer bit repeat or oversampling mode for lane rate matching. Where, 0 = bitRepeat mode (changes effective lanerate), 1 = overSample (maintains same lane rate between ObsRx framer and Rx framer and oversamples the ADC samples)*/
-    0               /* Flag for determining if API will calculate the appropriate settings for framer lane outputs to physical lanes. Where, if '0' = API will set automatic lane crossbar, '1' = set to manual mode and the value in serializerLaneCrossbar will be used*/
-};
-
-static mykonosJesd204bDeframerConfig_t deframer =
-{
-    0,              /* bankId extension to Device ID (Valid 0..15)*/
-    0,              /* deviceId  link identification number. (Valid 0..255)*/
-    0,              /* lane0Id Lane0 ID. (Valid 0..31)*/
-    4,              /* M  number of DACss (0, 2, or 4) - 2 DACs per transmit chain */
-    32,             /* K  #frames in a multiframe (default=32), F*K=multiple of 4. (F=2*M/numberOfLanes)*/
-    0,              /* scramble  scrambling off if scramble= 0.*/
-    1,              /* External SYSREF select. 0 = use internal SYSREF, 1 = external SYSREF*/
-    0x03,           /* Deserializer lane select bit field. Where, [0] = Lane0 enabled, [1] = Lane1 enabled, etc */
-    0xE4,           /* Lane crossbar to map physical lanes to deframer lane inputs [1:0] = Deframer Input 0 Lane section, [3:2] = Deframer Input 1 lane select, etc */
-    1,              /* Equalizer setting. Applied to all deserializer lanes. Range is 0..4*/
-    0,              /* PN inversion per each lane.  bit[0] = 1 Invert PN of Lane 0, bit[1] = Invert PN of Lane 1, etc).*/
-    0,              /* LMFC_Offset offset value to adjust deterministic latency. Range is 0..31*/
-    0,              /* Flag for determining if SYSREF on relink should be set. Where, if > 0 = set, '0' = not set*/
-    0,              /* Flag for determining if auto channel select for the xbar should be set. Where, if > 0 = set, '0' = not set*/
-    0,              /* Flag for determining if CMOS mode for TX Sync signal is used. Where, if > 0 = CMOS, '0' = LVDS*/
-    0               /* Flag for determining if API will calculate the appropriate settings for deframer lane in to physical lanes. Where, if '0' = API will set automatic lane crossbar, '1' = set to manual mode and the value in deserializerLaneCrossbar will be used*/
-};
-
-static mykonosRxGainControl_t rxGainControl =
-{
-    MGC,            /* Current Rx gain control mode setting*/
-    255,            /* Rx1 Gain Index, can be used in different ways for manual and AGC gain control*/
-    255,            /* Rx2 Gain Index, can be used in different ways for manual and AGC gain control*/
-    255,            /* Max gain index for the currently loaded Rx1 Gain table*/
-    195,            /* Min gain index for the currently loaded Rx1 Gain table*/
-    255,            /* Max gain index for the currently loaded Rx2 Gain table*/
-    195,            /* Min gain index for the currently loaded Rx2 Gain table*/
-    0,              /* Stores Rx1 RSSI value read back from the Mykonos*/
-    0               /* Stores Rx2 RSSI value read back from the Mykonos*/
-};
-
-
-static mykonosORxGainControl_t orxGainControl =
-{
-    MGC,            /* Current ORx gain control mode setting*/
-    255,            /* ORx1 Gain Index, can be used in different ways for manual and AGC gain control*/
-    255,            /* ORx2 Gain Index, can be used in different ways for manual and AGC gain control*/
-    255,            /* Max gain index for the currently loaded ORx Gain table*/
-    237             /* Min gain index for the currently loaded ORx Gain table*/
-};
-
-static mykonosSnifferGainControl_t snifferGainControl =
-{
-    MGC,            /* Current Sniffer gain control mode setting*/
-    255,            /* Current Sniffer gain index. Can be used differently for MANUAL Gain control/AGC*/
-    255,            /* Max gain index for the currently loaded Sniffer Gain table*/
-    203             /* Min gain index for the currently loaded Sniffer Gain table*/
-};
-
-static mykonosPeakDetAgcCfg_t rxPeakAgc =
-{
-	0x0C,	/* apdHighThresh: */
-	0x08,	/* apdLowThresh */
-	0xB5,	/* hb2HighThresh */
-	0x80,	/* hb2LowThresh */
-	0x40,	/* hb2VeryLowThresh */
-	0x06,	/* apdHighThreshExceededCnt */
-	0x04,	/* apdLowThreshExceededCnt */
-	0x06,	/* hb2HighThreshExceededCnt */
-	0x04,	/* hb2LowThreshExceededCnt */
-	0x04,	/* hb2VeryLowThreshExceededCnt */
-	0x4,	/* apdHighGainStepAttack */
-	0x2,	/* apdLowGainStepRecovery */
-	0x4,	/* hb2HighGainStepAttack */
-	0x2,	/* hb2LowGainStepRecovery */
-	0x4,	/* hb2VeryLowGainStepRecovery */
-	0x1,	/* apdFastAttack */
-	0x1,	/* hb2FastAttack */
-	0x1,	/* hb2OverloadDetectEnable */
-	0x1,	/* hb2OverloadDurationCnt */
-	0x1	/* hb2OverloadThreshCnt */
-};
-
-static mykonosPowerMeasAgcCfg_t rxPwrAgc =
-{
-    0x01,	/* pmdUpperHighThresh */
-    0x03,	/* pmdUpperLowThresh */
-    0x0C,	/* pmdLowerHighThresh */
-    0x00,	/* pmdLowerLowThresh */
-    0x4,	/* pmdUpperHighGainStepAttack */
-    0x2,	/* pmdUpperLowGainStepAttack */
-    0x2,	/* pmdLowerHighGainStepRecovery */
-    0x4,	/* pmdLowerLowGainStepRecovery */
-    0x08,	/* pmdMeasDuration */
-    0x02	/* pmdMeasConfig */
-};
-
-static mykonosAgcCfg_t rxAgcConfig =
-{
-    255,	/* agcRx1MaxGainIndex */
-    195,	/* agcRx1MinGainIndex */
-    255,	/* agcRx2MaxGainIndex */
-    195,	/* agcRx2MinGainIndex: */
-    255,	/* agcObsRxMaxGainIndex */
-    203,	/* agcObsRxMinGainIndex */
-    1,		/* agcObsRxSelect */
-    1,		/* agcPeakThresholdMode */
-    1,		/* agcLowThsPreventGainIncrease */
-	30720,	/* agcGainUpdateCounter */
-    3,	/* agcSlowLoopSettlingDelay */
-    2,	/* agcPeakWaitTime */
-    1,	/* agcResetOnRxEnable */
-    0,	/* agcEnableSyncPulseForGainCounter */
-    &rxPeakAgc,
-    &rxPwrAgc
-};
-
-static mykonosPeakDetAgcCfg_t obsRxPeakAgc =
-{
-	0x1F,	/* apdHighThresh: */
-	0x16,	/* apdLowThresh */
-	0xB5,	/* hb2HighThresh */
-	0x80,	/* hb2LowThresh */
-	0x40,	/* hb2VeryLowThresh */
-	0x06,	/* apdHighThreshExceededCnt */
-	0x04,	/* apdLowThreshExceededCnt */
-	0x06,	/* hb2HighThreshExceededCnt */
-	0x04,	/* hb2LowThreshExceededCnt */
-	0x04,	/* hb2VeryLowThreshExceededCnt */
-	0x4,	/* apdHighGainStepAttack */
-	0x2,	/* apdLowGainStepRecovery */
-	0x4,	/* hb2HighGainStepAttack */
-	0x2,	/* hb2LowGainStepRecovery */
-	0x4,	/* hb2VeryLowGainStepRecovery */
-	0x1,	/* apdFastAttack */
-	0x1,	/* hb2FastAttack */
-	0x1,	/* hb2OverloadDetectEnable */
-	0x1,	/* hb2OverloadDurationCnt */
-	0x1		/* hb2OverloadThreshCnt */
-};
-
-static mykonosPowerMeasAgcCfg_t obsRxPwrAgc =
-{
-    0x01,	/* pmdUpperHighThresh */
-    0x03,	/* pmdUpperLowThresh */
-    0x0C,	/* pmdLowerHighThresh */
-    0x00,	/* pmdLowerLowThresh */
-    0x4,	/* pmdUpperHighGainStepAttack */
-    0x2,	/* pmdUpperLowGainStepAttack */
-    0x2,	/* pmdLowerHighGainStepRecovery */
-    0x4,	/* pmdLowerLowGainStepRecovery */
-    0x08,	/* pmdMeasDuration */
-    0x02	/* pmdMeasConfig */
-};
-
-static mykonosAgcCfg_t obsRxAgcConfig =
-{
-    255,	/* agcRx1MaxGainIndex */
-    195,	/* agcRx1MinGainIndex */
-    255,	/* agcRx2MaxGainIndex */
-    195,	/* agcRx2MinGainIndex: */
-    255,	/* agcObsRxMaxGainIndex */
-    203,	/* agcObsRxMinGainIndex */
-    1,		/* agcObsRxSelect */
-    1,		/* agcPeakThresholdMode */
-    1,		/* agcLowThsPreventGainIncrease */
-	30720,	/* agcGainUpdateCounter */
-    3,		/* agcSlowLoopSettlingDelay */
-    2,		/* agcPeakWaitTime */
-    1,		/* agcResetOnRxEnable */
-    0,		/* agcEnableSyncPulseForGainCounter */
-    &obsRxPeakAgc,
-    &obsRxPwrAgc
-};
-
-
-static mykonosRxProfile_t rxProfile =
-{/* Rx 100MHz, IQrate 122.88MSPS, Dec5 */
-    1,              /* The divider used to generate the ADC clock*/
-    &rxFir,         /* Pointer to Rx FIR filter structure*/
-    2,              /* Rx FIR decimation (1,2,4)*/
-    5,              /* Decimation of Dec5 or Dec4 filter (5,4)*/
-    1,              /* If set, and DEC5 filter used, will use a higher rejection DEC5 FIR filter (1=Enabled, 0=Disabled)*/
-    1,              /* RX Half band 1 decimation (1 or 2)*/
-    122880,         /* Rx IQ data rate in kHz*/
-    100000000,      /* The Rx RF passband bandwidth for the profile*/
-    100000,         /* Rx BBF 3dB corner in kHz*/
-    NULL            /* pointer to custom ADC profile*/
-};
-
-static mykonosRxProfile_t orxProfile =
-{/* ORX 100MHz, IQrate 122.88MSPS, Dec5 */
-    1,              /* The divider used to generate the ADC clock*/
-    &obsrxFir,      /* Pointer to Rx FIR filter structure or NULL*/
-    2,              /* Rx FIR decimation (1,2,4)*/
-    5,              /* Decimation of Dec5 or Dec4 filter (5,4)*/
-    0,              /* If set, and DEC5 filter used, will use a higher rejection DEC5 FIR filter (1=Enabled, 0=Disabled)*/
-    1,              /* RX Half band 1 decimation (1 or 2)*/
-    122880,         /* Rx IQ data rate in kHz*/
-    100000000,      /* The Rx RF passband bandwidth for the profile*/
-    100000,         /* Rx BBF 3dB corner in kHz*/
-    NULL            /* pointer to custom ADC profile*/
-};
-
-
-static mykonosRxProfile_t snifferProfile =
-{ /* SRx 20MHz, IQrate 30.72MSPS, Dec5 */
-    1,              /* The divider used to generate the ADC clock*/
-    &snifferRxFir,  /* Pointer to Rx FIR filter structure or NULL*/
-    4,              /* Rx FIR decimation (1,2,4)*/
-    5,              /* Decimation of Dec5 or Dec4 filter (5,4)*/
-    0,              /* If set, and DEC5 filter used, will use a higher rejection DEC5 FIR filter (1=Enabled, 0=Disabled)*/
-    2,              /* RX Half band 1 decimation (1 or 2)*/
-    30720,          /* Rx IQ data rate in kHz*/
-    10000000,       /* The Rx RF passband bandwidth for the profile*/
-    100000,         /* Rx BBF 3dB corner in kHz*/
-    NULL            /* pointer to custom ADC profile*/
-};
-
-
-
-static mykonosTxProfile_t txProfile =
-{ /* Tx 20/100MHz, IQrate 122.88MSPS, Dec5 */
-    DACDIV_2p5,     /* The divider used to generate the DAC clock*/
-    &txFir,         /* Pointer to Tx FIR filter structure*/
-    2,              /* The Tx digital FIR filter interpolation (1,2,4)*/
-    2,              /* Tx Halfband1 filter interpolation (1,2)*/
-    1,              /* Tx Halfband2 filter interpolation (1,2)*/
-    1,              /* TxInputHbInterpolation (1,2)*/
-    122880,         /* Tx IQ data rate in kHz*/
-	100000000,      /* Primary Signal BW*/
-    100000000,      /* The Tx RF passband bandwidth for the profile*/
-    710539,         /* The DAC filter 3dB corner in kHz*/
-    50000,          /* Tx BBF 3dB corner in kHz*/
-    0               /* Enable DPD, only valid for AD9373*/
-};
-
-static mykonosDigClocks_t mykonosClocks =
-{
-    122880,         /* CLKPLL and device reference clock frequency in kHz*/
-    9830400,        /* CLKPLL VCO frequency in kHz*/
-    VCODIV_2,       /* CLKPLL VCO divider*/
-    4               /* CLKPLL high speed clock divider*/
-};
-
-static mykonosRxSettings_t  rxSettings =
-{
-    &rxProfile,     /* Rx datapath profile, 3dB corner frequencies, and digital filter enables*/
-    &rxFramer,      /* Rx JESD204b framer configuration structure*/
-    &rxGainControl, /* Rx Gain control settings structure*/
-    &rxAgcConfig,   /* Rx AGC control settings structure*/
-	RX1_RX2,        /* The desired Rx Channels to enable during initialization*/
-    0,              /* Internal LO = 0, external LO*2 = 1*/
-    2550000000U,    /* Rx PLL LO Frequency (internal or external LO)*/
-    0               /* Flag to choose if complex baseband or real IF data are selected for Rx and ObsRx paths. Where, if > 0 = real IF data, '0' = zero IF (IQ) data*/
-};
-
-static mykonosDpdConfig_t dpdConfig =
-{
-    5,              /* 1/2^(damping + 8) fraction of power `forgotten' per sample (default: `1/8192' = 5, valid 0 to 15), 0 = infinite damping*/
-    1,              /* number of weights to use for int8_cpx weights weights member of this structure (default = 1)*/
-    2,              /* DPD model version: one of four different generalized polynomial models: 0 = same as R0 silicon, 1-3 are new and the best one depends on the PA (default: 2)*/
-    1,              /* 1 = Update saved model whenever peak Tx digital RMS is within 1dB of historical peak Tx RMS*/
-    20,             /* Determines how much weight the loaded prior model has on DPD modeling (Valid 0 - 32, default 20)*/
-    0,              /* Default off = 0, 1=enables automatic outlier removal during DPD modeling */
-    512,            /* Number of samples to capture (default: 512, valid 64-32768)*/
-    4096,           /* threshold for sample in AM-AM plot outside of 1:1 line to be thrown out. (default: 50% = 8192/2, valid 8192 to 1)*/
-    0,              /* 16th of an ORx sample (16=1sample), (default 0, valid -64 to 64)*/
-    255,            /* Default 255 (-30dBFs=(20Log10(value/8192)), (valid range  1 to 8191)*/
-    {{64,0},{0,0},{0,0}}/* DPD model error weighting (real/imag valid from -128 to 127)*/
-};
-
-static mykonosClgcConfig_t clgcConfig =
-{
-    -2000,          /* (value = 100 * dB (valid range -32768 to 32767) - total gain and attenuation from Mykonos Tx1 output to ORx1 input in (dB * 100)*/
-    -2000,          /* (value = 100 * dB (valid range -32768 to 32767) - total gain and attenuation from Mykonos Tx2 output to ORx2 input in (dB * 100)*/
-    0,              /* (valid range 0 - 40dB), no default, depends on PA, Protects PA by making sure Tx1Atten is not reduced below the limit*/
-    0,              /* (valid range 0 - 40dB), no default, depends on PA, Protects PA by making sure Tx2Atten is not reduced below the limit*/
-    75,             /* valid range 1-100, default 75*/
-    75,             /* valid range 1-100, default 45*/
-    0,              /* 0= allow CLGC to run, but Tx1Atten will not be updated. User can still read back power measurements.  1=CLGC runs, and Tx1Atten automatically updated*/
-    0,              /* 0= allow CLGC to run, but Tx2Atten will not be updated. User can still read back power measurements.  1=CLGC runs, and Tx2Atten automatically updated*/
-    0,              /* 16th of an ORx sample (16=1sample), (default 0, valid -64 to 64)*/
-    255,            /* Default 255 (-30dBFs=(20Log10(value/8192)), (valid range  1 to 8191)*/
-    600,            /* Threshold for Tx1 in order to stop tracking, value = 100 * dB, default 6db then value = 600*/
-    600,            /* Threshold for Tx2 in order to stop tracking, value = 100 * dB, default 6db then value = 600*/
-    0,              /* Threshold feature enable for Tx1, 0 = disable, 1 = enable, default = 0*/
-    0               /* Threshold feature enable for Tx1, 0 = disable, 1 = enable, default = 0*/
-};
-
-static mykonosVswrConfig_t vswrConfig =
-{
-    0,              /* 16th of an ORx sample (16=1sample), (default 0, valid -64 to 64)*/
-    255,            /* Default 255 (-30dBFs=(20Log10(value/8192)), (valid range  1 to 8191)*/
-    0,              /* 3p3V GPIO pin to use to control VSWR switch for Tx1 (valid 0-11) (output from Mykonos)*/
-    1,              /* 3p3V GPIO pin to use to control VSWR switch for Tx2 (valid 0-11) (output from Mykonos)*/
-    0,              /* 3p3v GPIO pin polarity for forward path of Tx1, opposite used for reflection path (1 = high level, 0 = low level)*/
-    0,              /* 3p3v GPIO pin polarity for forward path of Tx2, opposite used for reflection path (1 = high level, 0 = low level)*/
-    50,             /* Delay for Tx1 after flipping the VSWR switch until measurement is made. In us resolution*/
-    50              /* Delay for Tx2 after flipping the VSWR switch until measurement is made. In us resolution*/
-};
-
-static mykonosTxSettings_t txSettings =
-{
-    &txProfile,     /* Tx datapath profile, 3dB corner frequencies, and digital filter enables*/
-    &deframer,      /* Mykonos JESD204b deframer config for the Tx data path*/
-    TX1_TX2,        /* The desired Tx channels to enable during initialization*/
-    0,              /* Internal LO=0, external LO*2 if =1*/
-    2500000000U,    /* Tx PLL LO frequency (internal or external LO)*/
-    TXATTEN_0P05_DB,/* Initial and current Tx1 Attenuation*/
-    10000,          /* Initial and current Tx1 Attenuation mdB*/
-    10000,          /* Initial and current Tx2 Attenuation mdB*/
-    NULL,           /* DPD,CLGC,VSWR settings. Only valid for AD9373 device, set pointer to NULL otherwise*/
-    NULL,           /* CLGC Config Structure. Only valid for AD9373 device, set pointer to NULL otherwise*/
-    NULL            /* VSWR Config Structure. Only valid for AD9373 device, set pointer to NULL otherwise*/
-};
-
-
-static mykonosObsRxSettings_t obsRxSettings =
-{
-    &orxProfile,    /* ORx datapath profile, 3dB corner frequencies, and digital filter enables*/
-    &orxGainControl,/* ObsRx gain control settings structure*/
-    &obsRxAgcConfig,/* ORx AGC control settings structure*/
-    &snifferProfile,/* Sniffer datapath profile, 3dB corner frequencies, and digital filter enables*/
-    &snifferGainControl,/* SnRx gain control settings structure*/
-    &obsRxFramer,   /* ObsRx JESD204b framer configuration structure */
-    (MYK_ORX1_ORX2 | MYK_SNRXA_B_C),/* obsRxChannel */
-    OBSLO_TX_PLL,   /* (obsRxLoSource) The Obs Rx mixer can use the Tx Synth(TX_PLL) or Sniffer Synth (SNIFFER_PLL) */
-    2600000000U,    /* SnRx PLL LO frequency in Hz */
-    0,              /* Flag to choose if complex baseband or real IF data are selected for Rx and ObsRx paths. Where if > 0 = real IF data, '0' = complex data*/
-    NULL,           /* Custom Loopback ADC profile to set the bandwidth of the ADC response */
-    OBS_RXOFF       /* Default ObsRx channel to enter when radioOn called */
-};
-
-static mykonosArmGpioConfig_t armGpio =
-{
-    1,	// useRx2EnablePin; /*!< 0= RX1_ENABLE controls RX1 and RX2, 1 = separate RX1_ENABLE/RX2_ENABLE pins */
-    1,	// useTx2EnablePin; /*!< 0= TX1_ENABLE controls TX1 and TX2, 1 = separate TX1_ENABLE/TX2_ENABLE pins */
-    1,	// txRxPinMode;     /*!< 0= ARM command mode, 1 = Pin mode to power up Tx/Rx chains */
-    0,	// orxPinMode;      /*!< 0= ARM command mode, 1 = Pin mode to power up ObsRx receiver*/
-
-    /*Mykonos ARM input GPIO pins -- Only valid if orxPinMode = 1 */
-    0,	// orxTriggerPin; /*!< Select desired GPIO pin (valid 4-15) */
-    0,	// orxMode2Pin;   /*!< Select desired GPIO pin (valid 0-18) */
-    0,	// orxMode1Pin;   /*!< Select desired GPIO pin (valid 0-18) */
-    0,	// orxMode0Pin;   /*!< Select desired GPIO pin (valid 0-18) */
-
-    /* Mykonos ARM output GPIO pins  --  always available, even when pin mode not enabled*/
-    0,	// rx1EnableAck;  /*!< Select desired GPIO pin (0-15), [4] = Output Enable */
-    0,	// rx2EnableAck;  /*!< Select desired GPIO pin (0-15), [4] = Output Enable */
-    0,	// tx1EnableAck;  /*!< Select desired GPIO pin (0-15), [4] = Output Enable */
-    0,	// tx2EnableAck;  /*!< Select desired GPIO pin (0-15), [4] = Output Enable */
-    0,	// orx1EnableAck;  /*!< Select desired GPIO pin (0-15), [4] = Output Enable */
-    0,	// orx2EnableAck;  /*!< Select desired GPIO pin (0-15), [4] = Output Enable */
-    0,	// srxEnableAck;  /*!< Select desired GPIO pin (0-15), [4] = Output Enable */
-    0 	// txObsSelect;   /*!< Select desired GPIO pin (0-15), [4] = Output Enable */
-    /* When 2Tx are used with only 1 ORx input, this GPIO tells the BBIC which Tx channel is   */
-    /* active for calibrations, so BBIC can route correct RF Tx path into the single ORx input*/
-};
-
-static mykonosGpio3v3_t gpio3v3 =
-{
-    0,				/*!< Oe per pin, 1=output, 0 = input */
-    GPIO3V3_BITBANG_MODE,	/*!< Mode for GPIO3V3[3:0] */
-    GPIO3V3_BITBANG_MODE,	/*!< Mode for GPIO3V3[7:4] */
-    GPIO3V3_BITBANG_MODE,	/*!< Mode for GPIO3V3[11:8] */
-};
-
-static mykonosGpioLowVoltage_t gpio =
-{
-    0,/* Oe per pin, 1=output, 0 = input */
-    GPIO_MONITOR_MODE,/* Mode for GPIO[3:0] */
-    GPIO_MONITOR_MODE,/* Mode for GPIO[7:4] */
-    GPIO_MONITOR_MODE,/* Mode for GPIO[11:8] */
-    GPIO_MONITOR_MODE,/* Mode for GPIO[15:12] */
-    GPIO_MONITOR_MODE,/* Mode for GPIO[18:16] */
-};
-
-static mykonosAuxIo_t mykonosAuxIo =
-{
-    0,	//auxDacEnableMask uint16_t
-    {0,0,0,0,0,0,0,0,0,0},	 //AuxDacValue uint16[10]
-    {0,0,0,0,0,0,0,0,0,0},	 //AuxDacSlope uint8[10]
-    {0,0,0,0,0,0,0,0,0,0},	 //AuxDacVref uint8[10]
-    &gpio3v3,	//pointer to gpio3v3 struct
-    &gpio,	//pointer to gpio1v8 struct
-    &armGpio
-};
-
-static spiSettings_t mykSpiSettings =
-{
-    1, /* chip select index - valid 1~8 */
-    0, /* the level of the write bit of a SPI write instruction word, value is inverted for SPI read operation */
-    1, /* 1 = 16-bit instruction word, 0 = 8-bit instruction word */
-    1, /* 1 = MSBFirst, 0 = LSBFirst */
-    0, /* clock phase, sets which clock edge the data updates (valid 0 or 1) */
-    0, /* clock polarity 0 = clock starts low, 1 = clock starts high */
-    0, /* Not implemented in ADIs platform layer. SW feature to improve SPI throughput */
-    1, /* Not implemented in ADIs platform layer. For SPI Streaming, set address increment direction. 1= next addr = addr+1, 0:addr=addr-1 */
-    1  /* 1: Use 4-wire SPI, 0: 3-wire SPI (SDIO pin is bidirectional). NOTE: ADI's FPGA platform always uses 4-wire mode */
-};
-
-static mykonosTempSensorConfig_t tempSensor =
-{
-    7,              /* 3-bit value that controls the AuxADC decimation factor when used for temp sensor calculations; AuxADC_decimation = 256 * 2^tempDecimation*/
-    67,             /* 8-bit offset that gets added to temp sensor code internally*/
-    1,              /* this bit overrides the factory-calibrated fuse offset and uses the value stored in the offset member*/
-    15,             /* 4-bit code with a resolution of 1°C/LSB, each time a temperature measurement is performed, the device compares the current temperature against the previous value.*/
-};
-
-static mykonosTempSensorStatus_t tempStatus =
-{
-    0,              /* 16-bit signed temperature value (in deg C) that is read back*/
-    0,              /* If the absolute value of the difference is greater than the value in temperature configuration tempWindow, the windowExceeded flag is set.*/
-    0,              /* when windowExceeded member gets set, this bit is set to 1 if current value is greater than previous value, else reset*/
-    0,              /* when the reading is complete and a valid temperature value stored in tempCode.*/
-};
-
-mykonosDevice_t mykDevice =
-{
-    &mykSpiSettings,    /* SPI settings data structure pointer */
-    &rxSettings,        /* Rx settings data structure pointer */
-    &txSettings,        /* Tx settings data structure pointer */
-    &obsRxSettings,     /* ObsRx settings data structure pointer */
-    &mykonosAuxIo,          /* Auxiliary IO settings data structure pointer */
-    &mykonosClocks,     /* Holds settings for CLKPLL and reference clock */
-    0                   /* Mykonos initialize function uses this as an output to remember which profile data structure pointers are valid */
-};
@@ -1,24 +0,0 @@
-/**
- * \file myk_init.h
- *
- * \brief Contains structure definitions for myk_init.c
- *
- * The top level structure mykonosDevice_t mykDevice uses keyword
- * extern to allow the application layer main() to have visibility
- * to these settings.
- */
-
-/**
-* \page Disclaimer Legal Disclaimer
-* Copyright 2015-2017 Analog Devices Inc.
-* Released under the AD9371 API license, for more information see the "LICENSE.txt" file in this zip file.
-*
-*/
-
-#ifndef MYK_INIT_H_
-#define MYK_INIT_H_
-
-
-extern mykonosDevice_t mykDevice;
-
-#endif
@@ -1,13 +0,0 @@
-/**
-SOFTWARE LICENSE AGREEMENT
-20180301-AD937X-CTSLA
-**/
-
-// Version 5.2.2
-#ifndef SRC_MYKONOS_BIN_H_
-#define SRC_MYKONOS_BIN_H_
-
-unsigned char firmware_Mykonos_M3_bin[];
-unsigned int firmware_Mykonos_M3_bin_len;
-
-#endif
@@ -1,740 +0,0 @@
-/**
- * \file ad9528.c
- * \brief Contains source code for configuring and initializing AD9528 clock device
- */
-
-/**
-* \page Disclaimer Legal Disclaimer
-* Copyright 2015-2017 Analog Devices Inc.
-* Released under the AD9371 API license, for more information see the "LICENSE.txt" file in this zip file.
-*
-*/
-
-#include "ad9528.h"
-
-/**
- * \brief Performs a hard reset on the AD9528 DUT
- *
- * <B>Dependencies</B>
- * - device->spiSettings->chipSelectIndex
- *
- * \param device is structure pointer to the AD9528 data structure containing settings
- * \return Returns enum ADI_ERR, ADIERR_OK=pass, !ADIERR_OK=fail
- */
-ADI_ERR AD9528_resetDevice(ad9528Device_t *device)
-{
-    /* toggle RESETB on device with matching spi chip select index */
-    CMB_hardReset(device->spiSettings->chipSelectIndex);
-    return ADIERR_OK;
-}
-
-/**
- * \brief Sets the AD9528 device SPI settings (3wire/4wire, MSBFirst, etc).
- *
- * This function will use the settings in the device->spiSettings structure
- * to set SPI stream mode, address auto increment direction, MSBFirst/LSBfirst,
- * and 3wire/4wire mode.  The AD9528 device always uses SPI MODE 0 (CPHA=0, CPOL=0).
- * This function will update your device->spiSettings to set CHPA=0 and CPOL=0 and
- * longInstructionWord =1 to use a 16bit instruction word.
- *
- * <B>Dependencies</B>
- * - writes device->spiSettings->CPHA = 0
- * - writes device->spiSettings->CPOL = 0
- * - writes device->spiSettings->longInstructionWord = 1
- *
- * - device->spiSettings->MSBFirst
- * - device->spiSettings->enSpiStreaming
- * - device->spiSettings->autoIncAddrUp
- * - device->spiSettings->fourWireMode
- *
- * \param device is structure pointer to the AD9528 data structure containing settings
- *
- * \return Returns enum ADI_ERR, ADIERR_OK=pass, !ADIERR_OK=fail
- */
-ADI_ERR AD9528_setSpiSettings(ad9528Device_t *device)
-{
-    //device->spiSettings->enSpiStreaming
-    uint8_t spiReg = 0;
-
-    device->spiSettings->CPHA = 0;
-    device->spiSettings->CPOL = 0;
-    device->spiSettings->longInstructionWord = 1;
-
-    if (device->spiSettings->MSBFirst == 0)
-    {
-        spiReg |= 0x42; /* SPI bit is 1=LSB first */
-    }
-
-    if (device->spiSettings->autoIncAddrUp > 0)
-    {
-        spiReg |= 0x24;
-    }
-
-    if (device->spiSettings->fourWireMode > 0)
-    {
-        spiReg |= 0x18;
-    }
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_ADI_SPI_CONFIG_A, spiReg);
-
-    if (device->spiSettings->enSpiStreaming > 0)
-    {
-        /* Allow SPI streaming mode: SPI message ends when chip select deasserts */
-        CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_ADI_SPI_CONFIG_B, 0x00);
-    }
-    else
-    {
-        /* Force single instruction mode */
-        CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_ADI_SPI_CONFIG_B, 0x80);
-    }
-
-    return ADIERR_OK;
-}
-
-
-/**
- * \brief Helper function for ADI transceiver eval boards to init the AD9528 data structure
- *
- * This function inits the AD9528 device data structure with defaults that
- * are known to work with the ADI AD9369 and AD9371 evaluation boards.  NOTE: This function will
- * modify the contents of the AD9528 device data structure.
- *
- * <B>Dependencies</B>
- * - spi->chipSelectIndex
- * - spi
- *
- * \param device Pointer to the AD9528 device data structure to initialize
- * \param vcxoFrequency_Hz The VCXO frequency that is connected to the AD9528
- * \param refAFrequency_Hz The reference clock frequency being input into the AD9528 REFCLK A input
- * \param outputDeviceClock_Hz Desired output clock frequency to the FPGA and transceiver device
- *
- * \return Returns enum ADI_ERR, 0=pass, >0 = fail
-*/
-ADI_ERR AD9528_initDeviceDataStruct(ad9528Device_t *device, uint32_t vcxoFrequency_Hz, uint32_t refAFrequency_Hz, uint32_t outputDeviceClock_Hz)
-{
-//    uint16_t chDiv;
-//    uint8_t i = 0;
-//
-//    uint32_t pll1PfdFreq_Hz = 0;
-//    uint8_t pll1Ndiv = 0;
-//    uint8_t validPll1DivSetting = 0;
-//    uint8_t refAdiv = 1;
-//
-//
-//    uint8_t pll2RfDiv = 3; /* Valid values 3,4,5 */
-//    uint16_t pll2Ndiv = 1; /* Valid values 1-256 */
-//    uint32_t pll2InputFreq_Hz = 0;
-//    uint64_t pll2VcoFreq_Hz = 0;
-//    uint16_t pll2NdivStart = 0;
-//    uint8_t validPll2DivSetting = 0;
-//    uint64_t chDivU64 = 0;
-//
-//    static const uint64_t PLL2_MIN_VCO_FREQ_HZ = 3450000000ULL;
-//    static const uint64_t PLL2_MAX_VCO_FREQ_HZ = 4025000000ULL;
-//    /*******************************************************************
-//     * PLL1 Settings
-//     *******************************************************************
-//     */
-//
-//    /* find valid PLL1 Ndiv and REFA div */
-//    for (pll1Ndiv = 1; pll1Ndiv < 20; pll1Ndiv++)
-//    {
-//        pll1PfdFreq_Hz = vcxoFrequency_Hz / pll1Ndiv;
-//
-//        if ((pll1PfdFreq_Hz <= 110000000) && (pll1PfdFreq_Hz >= 1000000) &&
-//            (pll1PfdFreq_Hz <= refAFrequency_Hz) &&
-//            (refAFrequency_Hz % pll1PfdFreq_Hz == 0)
-//           )
-//        {
-//            validPll1DivSetting = 1;
-//            refAdiv = refAFrequency_Hz / pll1PfdFreq_Hz ;
-//            break;
-//        }
-//    }
-//
-//    if (validPll1DivSetting == 0)
-//    {
-//        return ADIERR_INV_PARM;
-//    }
-//
-//    device->pll1Settings->nDivider = pll1Ndiv; //This init function always runs PLL1 at 30.72MHz Pfd rate
-//    device->pll1Settings->refA_bufferCtrl = DIFFERENTIAL;       //DISABLED = 0, SINGLE_ENDED, NEG_SINGLE_ENDED, DIFFERENTIAL
-//    device->pll1Settings->refA_Divider = refAdiv;
-//    device->pll1Settings->refA_Frequency_Hz = refAFrequency_Hz;
-//    device->pll1Settings->refB_bufferCtrl = DISABLED;           //DISABLED = 0, SINGLE_ENDED, NEG_SINGLE_ENDED, DIFFERENTIAL
-//    device->pll1Settings->refB_Divider = 1;
-//    device->pll1Settings->refB_Frequency_Hz = 0;
-//    device->pll1Settings->vcxoBufferCtrl  = NEG_SINGLE_ENDED;   //DISABLED = 0, SINGLE_ENDED, NEG_SINGLE_ENDED, DIFFERENTIAL
-//    device->pll1Settings->vcxo_Frequency_Hz = vcxoFrequency_Hz;
-//
-//    /*******************************************************************
-//     * PLL2 Settings
-//     *******************************************************************
-//     */
-//
-//    /*******************************************************************
-//     * Output Distribution Settings
-//     * 9369CE02A uses the following clock outputs
-//     * OUT 1: FPGA REFCLK
-//     * OUT 3: FPGA SYSREF
-//     * OUT 12: DUT SYSREF
-//     * OUT 13: DUT REFCLK
-//     *******************************************************************
-//     */
-//
-//    /* PLL 2 input clock can be several different things.  Currently hard coded by this init funciton to use
-//     * PLL 1 output (VCXO Frequency) with no scaling
-//     */
-//    pll2InputFreq_Hz = device->pll1Settings->vcxo_Frequency_Hz;
-//    validPll2DivSetting = 0;
-//
-//    /* Sweep PLL2 Divider settings to find something that has a valid integer divide (3,4,5)*/
-//    for (pll2RfDiv = 3; pll2RfDiv <= 5; pll2RfDiv++)
-//    {
-//
-//        pll2NdivStart = (PLL2_MIN_VCO_FREQ_HZ / pll2RfDiv / pll2InputFreq_Hz);
-//        /* find valid PLL2 Ndiv (1-256) */
-//        for (pll2Ndiv = pll2NdivStart; pll2Ndiv <= 256; pll2Ndiv++)
-//        {
-//            pll2VcoFreq_Hz = (pll2InputFreq_Hz * pll2RfDiv * pll2Ndiv);
-//
-//            if (pll2VcoFreq_Hz < PLL2_MIN_VCO_FREQ_HZ)
-//            {
-//                /* Continue to next PLL2 N div */
-//                continue;
-//            }
-//            else if (pll2VcoFreq_Hz > PLL2_MAX_VCO_FREQ_HZ)
-//            {
-//                /* Break to next PLL2 RF div */
-//                break;
-//            }
-//
-//            if (((pll2VcoFreq_Hz / pll2RfDiv) % outputDeviceClock_Hz) == 0)
-//            {
-//
-//                device->pll2Settings->rfDivider = pll2RfDiv;
-//                device->pll2Settings->n2Divider = pll2Ndiv;
-//                device->pll2Settings->totalNdiv = pll2RfDiv * pll2Ndiv;
-//                chDivU64 = ((pll2VcoFreq_Hz / pll2RfDiv) / outputDeviceClock_Hz);
-//
-//                if ((chDivU64 < 1) || (chDivU64 > 256))
-//                {
-//                    return ADIERR_INV_PARM;
-//                }
-//                else
-//                {
-//                    chDiv = (uint16_t)(chDivU64);
-//                }
-//
-//                validPll2DivSetting = 1;
-//                break;
-//            }
-//        }
-//
-//        if (validPll2DivSetting == 1)
-//        {
-//            break;
-//        }
-//    }
-//
-//    if (validPll2DivSetting == 0)
-//    {
-//        return ADIERR_INV_PARM;
-//    }
-//
-//    device->outputSettings->outPowerDown = (uint16_t)(~0x300A);     //enable outputs 13,12,3 and 1
-//
-//    for (i=0; i<14; i++){
-//        device->outputSettings->outSource[i] = CHANNEL_DIV; //CHANNEL_DIV , PLL1_OUTPUT, SYSREF, INV_PLL1_OUTPUT
-//        device->outputSettings->outBufferCtrl[i] = LVDS;        //LVDS, LVDS_BOOST, HSTL
-//        device->outputSettings->outChannelDiv[i] = chDiv;
-//        device->outputSettings->outFrequency_Hz[i] = outputDeviceClock_Hz;
-//        device->outputSettings->outAnalogDelay[i] = 0;
-//        device->outputSettings->outDigitalDelay[i] = 0;
-//    }
-//
-//
-//    device->outputSettings->outSource[3] = SYSREF;
-//    device->outputSettings->outSource[12] = SYSREF;
-//
-//
-//    device->sysrefSettings->sysrefDivide = 512; //SYSREF frequency = VCXO / 2 / sysrefDivde
-//    device->sysrefSettings->sysrefNshotMode = ONE_PULSE;        //ONE_PULSE=0, TWO_PULSES=2, FOUR_PULSES=3, SIX_PULSES=4, EIGHT_PULSES=5
-//    device->sysrefSettings->sysrefPatternMode = NSHOT;          //NSHOT=0, CONTINUOUS=1, PRBS=2, STOP=3
-//    device->sysrefSettings->sysrefPinBufferMode = DISABLED;     //DISABLED = 0, SINGLE_ENDED, NEG_SINGLE_ENDED, DIFFERENTIAL
-//    device->sysrefSettings->sysrefPinEdgeMode = LEVEL_ACTIVE_HIGH;  //LEVEL_ACTIVE_HIGH=0, LEVEL_ACTIVE_LOW=1, RISING_EDGE=2, FALLING_EDGE=3
-//    device->sysrefSettings->sysrefRequestMethod = SPI;          //SPI=0,PIN=1
-//    device->sysrefSettings->sysrefSource = INTERNAL;            //EXTERNAL=0, EXT_RESAMPLED=1, INTERNAL=2
-    return ADIERR_OK;
-}
-
-/**
- * \brief Debug function to print out summary of AD9528 setup
- *
- * \param device AD9528 Device data structure describing setup of device.
- *
- * \return Returns enum ADI_ERR, 0=pass, >0 = fail
-***********************************************************************************/
-ADI_ERR AD9528_reportClockRates(ad9528Device_t *device)
-{
-
-    return ADIERR_OK;
-} //debug function to help verify data structure is setup correctly.
-
-/**
- * \brief Initializes the AD9528 by writing all SPI registers
- *
- * Initializes the AD9528 for use with the AD9369 transceiver.  Designed to work with
- * a reference clock of 122.88MHz.  Reference clock is expected to be 30.72MHz.
- * The output clocks from the AD9528 can run at 122.88M, 153.6M, 184.32M, 245.76M, or 307.2M.
- * Typical setup: REFA frequency = 30.72, VCXO = 122.88MHz
- * SYNC(SYSREF) pulses output at rate of 120kHz
- *
- * <B>Dependencies</B>
- * - All parameters in device structure
- *
- * \param device is structure pointer to AD9528 clock device structure
- *
- * \return Returns enum ADI_ERR, 0=pass, >0 = fail
- */
-ADI_ERR AD9528_initialize(ad9528Device_t *device) { //writes all registers to desired values, leaves clock outputs off, SYSREF output disabled.
-    uint8_t pll2_Adiv=0;
-    uint8_t pll2_Bdiv=0;
-    uint8_t reg108=0;
-    uint8_t reg109=0;
-    uint8_t i = 0;
-    uint8_t j = 0;
-    uint8_t reg508;
-    ADI_ERR retval = ADIERR_OK;
-
-    CMB_writeToLog(ADIHAL_LOG_MESSAGE, device->spiSettings->chipSelectIndex, ADIERR_OK, "\n// AD9528_initialize\n");
-
-    //CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_ADI_SPI_CONFIG_A, 0x18); //[4] and [3] =1 enable 4 wire SPI
-    //CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_ADI_SPI_CONFIG_B, 0x00);
-    retval = AD9528_setSpiSettings(device);
-    if (retval != ADIERR_OK)
-    {
-        return retval;
-    }
-
-    /**********************************************************************
-     * Configure PLL1
-     **********************************************************************
-     */
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_REF_A_DIVIDER_LSB,
-    		device->pll1Settings->refA_Divider & 0xFF);		//REF A div[7:0]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_REF_A_DIVIDER_MSB,
-    		(device->pll1Settings->refA_Divider >> 8) & 0x03); //REF A div[9:8]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_REF_B_DIVIDER_LSB,
-    		device->pll1Settings->refB_Divider & 0xFF);		//REF B div[7:0]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_REF_B_DIVIDER_MSB,
-    		(device->pll1Settings->refB_Divider >> 8) & 0x03); //REF B div[9:8]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL1_N_DIV_LSB,
-    		device->pll1Settings->nDivider & 0xFF); //PLL1 N div[7:0]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL1_N_DIV_MSB,
-    		(device->pll1Settings->nDivider >> 8) & 0x03); //PLL1 N div[9:8]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL1_CHARGEPUMP,
-    		0x0A); //PLL1 Charge Pump control 1
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL1_CP_CTRL2,
-    		0x03); //PLL1 Charge Pump control 2
-
-    switch (device->pll1Settings->refA_bufferCtrl){
-        case DISABLED:
-        	reg108 &= ~0x28;
-        	reg109 &= ~0x01;
-        	break; //clear all REFA enable bits
-        case SINGLE_ENDED:
-        	reg108 |=  0x08;
-        	reg109 &= ~0x01;
-        	break; //Set REFA receiver enable, clear REFA SE negative input enable
-        case NEG_SINGLE_ENDED:
-        	reg108 |=  0x08;
-        	reg108 &= ~0x10;
-        	reg109 |= 0x01;
-        	break; //Disable REFA diff receiver, enable REFA receiver and use negative REFA input
-        case DIFFERENTIAL:
-        	reg108 |=  0x28;
-        	reg109 &= ~0x01;
-        	break;
-        default:
-        	reg108 |=  0x08;
-        	reg109 &= ~0x01;
-        	break; //default to single ended case
-    }
-    switch (device->pll1Settings->refB_bufferCtrl){
-        case DISABLED:
-        	reg108 &= ~0x50;
-        	reg109 &= ~0x02;
-        	break; //clear all REFB enable bits
-        case SINGLE_ENDED:
-        	reg108 |=  0x10;
-        	reg109 &= ~0x02;
-        	break; //Set REFB receiver enable, clear REFB SE negative input enable
-        case NEG_SINGLE_ENDED:
-        	reg108 |=  0x10;
-        	reg108 &= ~0x40;
-        	reg109 |= 0x02;
-        	break; //Disable REFB diff receiver, enable REFB receiver and use negative REFB input
-        case DIFFERENTIAL:
-        	reg108 |=  0x50;
-        	reg109 &= ~0x02;
-        	break;
-        default:
-        	reg108 |=  0x10;
-        	reg109 &= ~0x02;
-        	break; //default to single ended case
-    }
-    switch (device->pll1Settings->vcxoBufferCtrl){
-        case DISABLED:
-        	reg108 &= ~0x03;
-        	reg108 |=  0x04;
-        	break; //power down VCXO input
-        case SINGLE_ENDED:
-        	reg108 &= ~0x07;
-        	break; //Clear VCXO receiver power down, defaults to Single ended mode
-        case NEG_SINGLE_ENDED:
-        	reg108 &= ~0x07;
-        	reg108 |=  0x02;
-        	break; //Clear VCXO power down, enable Negative single ended mode[1]
-        case DIFFERENTIAL:
-        	reg108 &= ~0x07;
-        	reg108 |=  0x01;
-        	break; //Clear VCXO power down, enable differential input buffer[0]
-        default:
-        	reg108 &= ~0x07;
-        	break; //default to positive single ended case
-    }
-
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_INPUT_RECEIVERS1,
-    		reg108); //Input receiver settings (single ended or differential clock inputs)
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_INPUT_RECEIVERS2,
-    		reg109); //Input receiver settings
-
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_INPUT_RECEIVERS3,
-    		0x0A); //Reference selection mode
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL1_FASTLOCK,
-    		0x00); //Disable Fast lock
-
-    /**********************************************************************
-     * Configure PLL2
-     **********************************************************************
-     */
-    pll2_Bdiv = device->pll2Settings->totalNdiv / 4;
-    pll2_Adiv = device->pll2Settings->totalNdiv % 4;
-
-    if (pll2_Adiv > 3) {  //A div valid range (0 to 3)
-        CMB_writeToLog(ADIHAL_LOG_ERROR, device->spiSettings->chipSelectIndex, ADIERR_INV_PARM, "\n// AD9528 PLL2 A Divider out of range (0 to 3)\n");
-        return ADIERR_INV_PARM;
-    }
-    if (pll2_Bdiv < 3 || pll2_Bdiv > 63) {
-        CMB_writeToLog(ADIHAL_LOG_ERROR, device->spiSettings->chipSelectIndex, ADIERR_INV_PARM, "\n// AD9528 PLL2 B Divider out of range (3 to 63)\n");
-        return ADIERR_INV_PARM;
-    }
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL2_CHARGEPUMP,
-    		0xE6); //PLL2 Charge Pump[7:0]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL2_N_DIV,
-    		((pll2_Adiv & 0x3) << 6) | (pll2_Bdiv & 0x3F)); //PLL2 A and B divider
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL2_CTRL, 0x03); //PLL2 control
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL2_VCO_CTRL, 0x01); //Manual VCO CAL
-
-    if (device->pll2Settings->rfDivider < 3 || device->pll2Settings->rfDivider > 5) {
-        CMB_writeToLog(ADIHAL_LOG_ERROR, device->spiSettings->chipSelectIndex, ADIERR_INV_PARM, "\n// AD9528 PLL2 RF Divider out of range (3,4, or 5)\n");
-        return ADIERR_INV_PARM;
-    }
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL2_VCO_DIV,
-    		device->pll2Settings->rfDivider); //VCO divider
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL2_LF_CTRL1,
-    		0x3A); //PLL2 Loop filter [7:0]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL2_LF_CTRL2,
-    		0x00); //PLL2 Loop filter [8]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL2_RDIV,
-    		0x00); //R divider
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL2_REPLICA_CHDIV,
-    		(device->pll2Settings->totalNdiv / device->pll2Settings->rfDivider)
-			-1 ); //Replica channel divider: Ndivider = rfDivider * R divider
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_PLL2_REPLICA_DIV_PHASE,
-    		0x00); //Replica Channel Divider phase
-
-    /**********************************************************************
-     * Configure Output Distribution
-     **********************************************************************
-     */
-    for (i=0; i<14; i=i+1){
-        CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_CH_OUT0_CTRL1 + j,
-        		((device->outputSettings->outSource[i] & 0x7) << 5) |
-				(device->outputSettings->outAnalogDelay[i] & 0x1F));
-        CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_CH_OUT0_CTRL2 + j,
-        		((device->outputSettings->outBufferCtrl[i] & 0x3) << 6) |
-				(device->outputSettings->outDigitalDelay[i] & 0x3F));
-        CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_CH_OUT0_CHDIV + j,
-        		device->outputSettings->outChannelDiv[i]-1);
-        j = j+3;
-    }
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_OUTPUT_SYNC, 0x00); //Sync outputs
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_MASK_SYNC1, 0x00); //Mask SYNC[7:0]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_MASK_SYNC2, 0x00); //Mask SYNC[13:8]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_EN_OUTPUT_PATH_SEL1,
-    		0x00); //Bypass SYSREF resample [6:0], bit0:Enable VCXO to feed output distrubution
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_EN_OUTPUT_PATH_SEL2,
-    		0x00); //Bypass SYSREF resample [13:7]
-
-    /**********************************************************************
-     * Configure SYSREF operation
-     **********************************************************************
-     */
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSERF_DIV_LSB,
-    		device->sysrefSettings->sysrefDivide & 0xFF); //SYSREF divider [7:0]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSERF_DIV_MSB,
-    		(device->sysrefSettings->sysrefDivide >> 8) & 0xFF); //SYSREF divider [7:0]
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSREF_CTRL3,
-    		((device->sysrefSettings->sysrefRequestMethod & 0x1) << 7) |
-    		((device->sysrefSettings->sysrefPinEdgeMode & 0x3) << 5) );
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSREF_CTRL4,
-    		((device->sysrefSettings->sysrefSource & 0x03) << 6) |
-    		((device->sysrefSettings->sysrefPatternMode & 0x3) << 4 ) |
-    		((device->sysrefSettings->sysrefNshotMode & 0x7) << 1) );
-
-    if(device->sysrefSettings->sysrefPinBufferMode == DISABLED)
-    {
-    	CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSREF_CTRL5,
-    			0x04); //power down input buffer for external SYSREF
-    }
-    else if(device->sysrefSettings->sysrefPinBufferMode == SINGLE_ENDED)
-    {
-    	CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSREF_CTRL5,
-    			0x00); //enable positive singled ended input
-    }
-    else if(device->sysrefSettings->sysrefPinBufferMode == NEG_SINGLE_ENDED)
-    {
-    	CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSREF_CTRL5,
-    			0x02); //enable negative singled ended input
-    }
-    else if(device->sysrefSettings->sysrefPinBufferMode == DIFFERENTIAL)
-    {
-    	CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSREF_CTRL5,
-    			0x01); //enable differential input buffer
-    }
-    else
-    {
-    	CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSREF_CTRL5,
-    			0x04); //power down input buffer for external SYSREF
-    }
-
-    /**********************************************************************
-     * Power down control
-     **********************************************************************
-     */
-
-    if (device->pll1Settings->bypassPll1 > 0)
-    {
-        CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_POWERDOWN_CTRL,
-        		0x14);// power up PLL2 and output distribution, power down PLL1
-    }
-    else
-    {
-        CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_POWERDOWN_CTRL,
-        		0x10);// power up PLL1, PLL2 and output distribution
-    }
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_CH_POWERDOWN1,
-    		device->outputSettings->outPowerDown & 0xFF); //power down out[7:0]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_CH_POWERDOWN2,
-    		((device->outputSettings->outPowerDown >> 8) & 0x3F)); //power down out[13:8]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_LDO_ENABLES1,
-    		0xFF); //LDO enable per output channel [7:0]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_LDO_ENABLES2,
-    		0xFF); //LDO enable per output channel [15:8]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_STATUS0_CTRL,
-    		0x07); //STATUS 0 outputs REFA present
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_STATUS1_CTRL,
-    		0x01); //STATUS 1 outputs PLL1 and PLL2 locked
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_STATUS_OE,
-    		0x0C);// Make Status0 and Status1 outputs after reset.
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_IO_UPDATE,
-    		0x01); //IO update to make all these settings valid in the 9528
-
-    CMB_setTimeout_ms(1000);
-     do{
-         CMB_SPIReadByte(device->spiSettings, AD9528_ADDR_STATUS_READBACK0, &reg508);
-         if(CMB_hasTimeoutExpired() > 0)
-         {
-             return ADIERR_FAILED;
-         }
-     }while((reg508 & 0xA2) != 0xA2);
-
-    return ADIERR_OK;
-}
-
-/// Send a SPI message to request a SYSREF pulse or continuous SYSREF from the AD9528.
-/*******************************************************************************//**
- * Requests a SYSREF from the AD9528.  It will use whatever settings for SYSREF
- * that are current configured in the AD9528.  This could be a single pulse,
- * multiple pulses, or continuous pulses.
- * <B>Dependencies</B>
- * - device->spiSettings
- * - device->sysrefSettings->sysrefPatternMode
- *
- * \param device is structure pointer to AD9528 clock device structure
- * \param enableSYSREF If NSHOT SYSREF mode, this parameter is ignored.  If PRBS/CONTINUOUS SYSREF mode, 1= enable SYSREF, 0= disable SYSREF.
- *
- * \return Returns enum ADI_ERR, 0=pass, >0 = fail
- ***********************************************************************************/
-ADI_ERR AD9528_requestSysref(ad9528Device_t *device, uint8_t enableSYSREF){
-    uint8_t _enableSYSREF=0;
-
-    if (device->sysrefSettings->sysrefPatternMode == NSHOT || enableSYSREF > 0)
-    {
-        _enableSYSREF = 1;
-    }
-    else
-    {
-        _enableSYSREF = 0;
-    }
-
-    CMB_SPIWriteField(device->spiSettings, AD9528_ADDR_SYSREF_CTRL4, _enableSYSREF, 0x01, 0x00); //Set SPI SYSREF request bit
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_IO_UPDATE, 0x01); //IO update to make all these settings valid in the 9528
-
-    return ADIERR_OK;
-}
-
-/// Allow changing the 9528 SYSREF frequency and pattern mode(CONTINUOUS, PRBS vs NSHOT mode)
-/*******************************************************************************//**
- * NOTE: this function will update the device structure with the parameter values passed
- * into this function. The device->sysrefSettings->sysrefPatternMode, device->sysrefSettings->sysrefNshotMode,
- * and device->sysrefSettings->sysrefDivide values will be updated in the device structure.
- *
- * <B>Dependencies</B>
- * - device->spiSettings
- *
- * \param device is structure pointer to AD9528 clock device structure
- * \param divideFromPll1Out Sets the SYSREF pulse frequency. SYSREF frequency = PLL1_VCXO frequency/divideFromPll1Out
- * \param sysrefPatternMode Valid settings: NSHOT, CONTINUOUS, PRBS, STOP
- * \param nShotPulses Valid settings: ONE_PULSE=0, TWO_PULSES=2, FOUR_PULSES=3, SIX_PULSES=4, EIGHT_PULSES=5
- *
- * \return Returns enum ADI_ERR, 0=pass, >0 = fail
- ***********************************************************************************/
-ADI_ERR AD9528_setupSYSREF(ad9528Device_t *device, uint16_t divideFromPll1Out,  sysrefPatternMode_t sysrefPatternMode, sysrefNshotMode_t nShotPulses)
-{
-    uint8_t reg403=0;
-
-    device->sysrefSettings->sysrefPatternMode = sysrefPatternMode;
-    device->sysrefSettings->sysrefNshotMode = nShotPulses;
-    device->sysrefSettings->sysrefDivide = divideFromPll1Out >> 1;  //SYSREF frequency is (PLL1)VCXO frequency / 2 / device->sysrefSettings->sysrefDivide
-
-    CMB_SPIReadByte(device->spiSettings, AD9528_ADDR_SYSREF_CTRL4, &reg403);
-
-    reg403 = reg403 & ~0x01; //clear bit 0 to stop a continuous sysref if it is on.
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSREF_CTRL4, reg403);
-
-    reg403 = reg403 & ~0x3E; //clear bits for pattern mode and Nshot mode bitfields
-    reg403 = reg403 | ((sysrefPatternMode & 0x3) << 4) | ((nShotPulses & 0x7) << 1);
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_SYSREF_CTRL4, reg403); //update internal sysref pattern mode and Nshot mode (number of pulses)
-
-    //SYSREF request bit x403[0] is left 0.  The next call to AD9528_requestSysref will start the SYSREF
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_IO_UPDATE, 0x01); //IO update to make all these settings valid in the 9528
-
-
-    return ADIERR_OK;
-}
-
-/// Update the AD9528 clock outputs that are enabled.
-/*******************************************************************************//**
- * NOTE: this function will update the device structure with the parameter values passed
- * into this function. The device->sysrefSettings->sysrefPatternMode, device->sysrefSettings->sysrefNshotMode,
- * and device->sysrefSettings->sysrefDivide values will be updated in the device structure.
- *
- * <B>Dependencies</B>
- * - device->spiSettings
- *
- * \param device is structure pointer to AD9528 clock device structure
- * \param clkEnable Sets which clock outputs are enabled. Bit per clock output. bit0 = out0, etc.
- *
- * \return Returns enum ADI_ERR, 0=pass, >0 = fail
- ***********************************************************************************/
-ADI_ERR AD9528_enableClockOutputs(ad9528Device_t *device, uint16_t clkEnable)
-{ //clkEnable: bit per clock output
-
-    device->outputSettings->outPowerDown = ~clkEnable;
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_CH_POWERDOWN1, device->outputSettings->outPowerDown & 0xFF); //power down out[7:0]
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_CH_POWERDOWN2, ((device->outputSettings->outPowerDown >> 8) & 0x3F)); //power down out[13:8]
-
-    CMB_SPIWriteByte(device->spiSettings, AD9528_ADDR_IO_UPDATE, 0x01); //IO update to make all these settings valid in the 9528
-    return ADIERR_OK;
-}
-
-/// Waits for PLL1 and PLL2 to lock and the REFA and VCXO clocks to be present
-/*******************************************************************************//**
- * Waits until Reference A clock and VCXO clock input to be detected (present),
- * and PLL1 and PLL2 to lock.  Will timeout after 1 second and return ADIERR_FAILED.
- * If clock are detected and PLLs locked, returns ADIERR_OK.
- *
- * <B>Dependencies</B>
- * - device->spiSettings
- *
- * \param device is structure pointer to AD9528 clock device structure
- *
- * \return Returns enum ADI_ERR, 0=pass, >0 = fail
- ***********************************************************************************/
-ADI_ERR AD9528_waitForPllLock(ad9528Device_t *device)
-{
-    uint8_t reg508;
-
-    CMB_setTimeout_ms(1000);
-    do{
-        CMB_SPIReadByte(device->spiSettings, AD9528_ADDR_STATUS_READBACK0, &reg508);
-        if(CMB_hasTimeoutExpired() > 0)
-        {
-            return ADIERR_FAILED;
-        }
-    }while((reg508 & 0x27) != 0x27);
-
-    return ADIERR_OK;
-}
-
-/// Reads the Lock Status of the PLLs and present detect of the reference clocks
-/*******************************************************************************//**
- * NOTE: This is a non blocking function that reads a register to see if PLL1
- * and PLL2 are locked and Reference clock A and the VCXO input clock are
- * detected (present). If the *status parameter is not NULL, the status will
- * be returned.  If *status is NULL, the error return value will denote if
- * the PllStatus is locked or not with ADIERR_OK or ADIERR_FAILED.
- *
- * <B>Dependencies</B>
- * - device->spiSettings
- *
- * \param device is structure pointer to AD9528 clock device structure
- *
- * \return Returns enum ADI_ERR, 0=pass, >0 = fail
- ***********************************************************************************/
-ADI_ERR AD9528_readPllStatus(ad9528Device_t *device, uint8_t *status)
-{
-    uint8_t reg508;
-
-    //bit5 is VCXO clock detected
-    //bit2 is REFCLK A detected
-    //bit1 is PLL2 lock detect
-    //bit0 is PLL1 lock detect
-
-    /* read twice to refresh status bits */
-    CMB_SPIReadByte(device->spiSettings, AD9528_ADDR_STATUS_READBACK0, &reg508);
-    CMB_SPIReadByte(device->spiSettings, AD9528_ADDR_STATUS_READBACK0, &reg508);
-    /* if status is a valid pointer, return the PLL status */
-    if (status > 0)
-    {
-        *status = reg508;
-    }
-
-    /* PLLs 1 and 2 are locked and VCXO and REFA detected if reg508 has bits 5,2,1 and 0 set */
-    if((reg508 & 0x27) == 0x27)
-        return ADIERR_OK;
-    else
-        return ADIERR_FAILED;
-}
@@ -1,44 +0,0 @@
-/**
- * \file ad9528.h
- * \brief Contains function declarations and ad9528Device_t structure typedef for ad9528.c
- */
-
-/**
-* \page Disclaimer Legal Disclaimer
-* Copyright 2015-2017 Analog Devices Inc.
-* Released under the AD9371 API license, for more information see the "LICENSE.txt" file in this zip file.
-*
-*/
-
-#ifndef _AD9528_LIB_H_
-#define _AD9528_LIB_H_
-
-#include <stdint.h>
-#include "../common.h"
-#include "t_ad9528.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define CLEMENTE_TDD_AD9528_CLKOUT_INDEX 13
-
-//Helper function to setup the 9528 device data structure specifically for the ADI transceiver evaluation cards
-ADI_ERR AD9528_initDeviceDataStruct(ad9528Device_t *device, uint32_t vcxoFrequency_Hz, uint32_t refAFrequency_Hz, uint32_t outputDeviceClock_Hz);
-ADI_ERR AD9528_reportClockRates(ad9528Device_t *device); //debug function to help verify data structure is setup correctly.
-
-//AD9528 API functions
-ADI_ERR AD9528_resetDevice(ad9528Device_t *device);
-ADI_ERR AD9528_setSpiSettings(ad9528Device_t *device);
-ADI_ERR AD9528_initialize(ad9528Device_t *device); //writes all registers to desired values, leaves clock outputs off.
-ADI_ERR AD9528_waitForPllLock(ad9528Device_t *device);
-ADI_ERR AD9528_readPllStatus(ad9528Device_t *device, uint8_t *status);
-ADI_ERR AD9528_enableClockOutputs(ad9528Device_t *device, uint16_t clkEnable); //clkEnable: bit per clock output
-ADI_ERR AD9528_setupSYSREF(ad9528Device_t *device, uint16_t divideFromPll1Out,  sysrefPatternMode_t sysrefPatternMode, sysrefNshotMode_t nShotPulses);
-ADI_ERR AD9528_requestSysref(ad9528Device_t *device, uint8_t enableSYSREF);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
@@ -1,277 +0,0 @@
-/*!
- * \file mykonos.h
- * \brief Contains macro definitions and function prototypes for mykonos.c
- *
- * Mykonos API version: 1.5.2.3566
- */
-
-/**
-* \page Disclaimer Legal Disclaimer
-* Copyright 2015-2017 Analog Devices Inc.
-* Released under the AD9371 API license, for more information see the "LICENSE.txt" file in this zip file.
-*
-*/
-
-#ifndef _MYKONOS_LIB_H_
-#define _MYKONOS_LIB_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "t_mykonos.h"
-#include "mykonos_version.h"
-
-#define TX_PROFILE_VALID    0x01
-#define RX_PROFILE_VALID    0x02
-#define ORX_PROFILE_VALID   0x04
-#define SNIFF_PROFILE_VALID 0x08
-
-/* 
- ****************************************************************************
- * General Initialization functions 
- ****************************************************************************
- */
-mykonosErr_t MYKONOS_resetDevice(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_getDeviceRev(mykonosDevice_t *device, uint8_t *revision);
-mykonosErr_t MYKONOS_getProductId(mykonosDevice_t *device, uint8_t *productId);
-mykonosErr_t MYKONOS_setSpiSettings(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_verifyDeviceDataStructure(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_verifyProfiles(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_initialize(mykonosDevice_t *device); 
-mykonosErr_t MYKONOS_waitForEvent(mykonosDevice_t *device, waitEvent_t waitEvent, uint32_t timeout_us);
-mykonosErr_t MYKONOS_readEventStatus(mykonosDevice_t *device, waitEvent_t waitEvent, uint8_t *eventDone);
-mykonosErr_t MYKONOS_getApiVersion (mykonosDevice_t *device, uint32_t *siVer, uint32_t *majorVer, uint32_t *minorVer, uint32_t *buildVer);
-
-/*
- *****************************************************************************
- * PLL / Synthesizer functions
- *****************************************************************************
- */
-mykonosErr_t MYKONOS_initDigitalClocks(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_setRfPllFrequency(mykonosDevice_t *device, mykonosRfPllName_t pllName, uint64_t rfPllLoFrequency_Hz);
-mykonosErr_t MYKONOS_getRfPllFrequency(mykonosDevice_t *device, mykonosRfPllName_t pllName, uint64_t *rfPllLoFrequency_Hz);
-mykonosErr_t MYKONOS_checkPllsLockStatus(mykonosDevice_t *device, uint8_t *pllLockStatus);
-mykonosErr_t MYKONOS_setRfPllLoopFilter(mykonosDevice_t *device, mykonosRfPllName_t pllName, uint16_t loopBandwidth_kHz, uint8_t stability);
-mykonosErr_t MYKONOS_getRfPllLoopFilter(mykonosDevice_t *device, mykonosRfPllName_t pllName, uint16_t *loopBandwidth_kHz, uint8_t *stability);
-/*
- *****************************************************************************
- * ARM Processor Control Functions
- *****************************************************************************
- */
-mykonosErr_t MYKONOS_initArm(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_loadArmFromBinary(mykonosDevice_t *device, uint8_t *binary, uint32_t count);
-mykonosErr_t MYKONOS_loadArmConcurrent(mykonosDevice_t *device, uint8_t *binary, uint32_t count);
-mykonosErr_t MYKONOS_verifyArmChecksum(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_checkArmState(mykonosDevice_t *device, mykonosArmState_t armStateCheck);
-mykonosErr_t MYKONOS_getArmVersion(mykonosDevice_t *device, uint8_t *majorVer, uint8_t *minorVer, uint8_t *rcVer, mykonosBuild_t *buildType);
-
-mykonosErr_t MYKONOS_configDpd(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_getDpdConfig(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_getDpdStatus(mykonosDevice_t *device, mykonosTxChannels_t txChannel, mykonosDpdStatus_t *dpdStatus);
-mykonosErr_t MYKONOS_restoreDpdModel(mykonosDevice_t *device, mykonosTxChannels_t txChannel, uint8_t *modelDataBuffer, uint32_t modelNumberBytes);
-mykonosErr_t MYKONOS_saveDpdModel(mykonosDevice_t *device, mykonosTxChannels_t txChannel, uint8_t *modelDataBuffer, uint32_t modelNumberBytes);
-mykonosErr_t MYKONOS_setDpdActState(mykonosDevice_t *device, mykonosTxChannels_t txChannel, uint8_t actState);
-mykonosErr_t MYKONOS_resetDpd(mykonosDevice_t *device, mykonosTxChannels_t txChannel, mykonosDpdResetMode_t reset);
-mykonosErr_t MYKONOS_setDpdBypassConfig(mykonosDevice_t *device, mykonosDpdBypassConfig_t *actConfig);
-mykonosErr_t MYKONOS_getDpdBypassConfig(mykonosDevice_t *device, mykonosDpdBypassConfig_t *actConfig);
-mykonosErr_t MYKONOS_setDpdActuatorCheck(mykonosDevice_t *device, mykonosDpdActuatorCheck_t *actCheck);
-mykonosErr_t MYKONOS_getDpdActuatorCheck(mykonosDevice_t *device, mykonosDpdActuatorCheck_t *actCheck);
-
-mykonosErr_t MYKONOS_setClgcAttenTuningConfig(mykonosDevice_t *device, mykonosClgcAttenTuningConfig_t *attRangeCfg);
-mykonosErr_t MYKONOS_getClgcAttenTuningConfig(mykonosDevice_t *device, mykonosClgcAttenTuningConfig_t *attRangeCfg);
-
-mykonosErr_t MYKONOS_configClgc(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_getClgcConfig(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_getClgcStatus(mykonosDevice_t *device, mykonosTxChannels_t txChannel, mykonosClgcStatus_t *clgcStatus);
-mykonosErr_t MYKONOS_setClgcGain(mykonosDevice_t *device, mykonosTxChannels_t txChannel, int16_t gain);
-
-mykonosErr_t MYKONOS_configVswr(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_getVswrConfig(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_getVswrStatus(mykonosDevice_t *device, mykonosTxChannels_t txChannel, mykonosVswrStatus_t *vswrStatus);
-
-mykonosErr_t MYKONOS_runInitCals(mykonosDevice_t *device, uint32_t calMask);
-mykonosErr_t MYKONOS_waitInitCals(mykonosDevice_t *device, uint32_t timeoutMs, uint8_t *errorFlag, uint8_t *errorCode);
-mykonosErr_t MYKONOS_abortInitCals(mykonosDevice_t *device, uint32_t *calsCompleted);
-mykonosErr_t MYKONOS_getInitCalStatus(mykonosDevice_t *device, mykonosInitCalStatus_t *initCalStatus);
-
-mykonosErr_t MYKONOS_resetExtTxLolChannel(mykonosDevice_t *device, mykonosTxChannels_t channelSel);
-
-mykonosErr_t MYKONOS_radioOn(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_radioOff(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_getRadioState(mykonosDevice_t *device, uint32_t *radioStatus);
-mykonosErr_t MYKONOS_enableTrackingCals(mykonosDevice_t *device, uint32_t enableMask);
-mykonosErr_t MYKONOS_rescheduleTrackingCal(mykonosDevice_t *device, mykonosTrackingCalibrations_t trackingCal);
-mykonosErr_t MYKONOS_setAllTrackCalState(mykonosDevice_t *device, uint32_t trackingCalMask);
-mykonosErr_t MYKONOS_getAllTrackCalState(mykonosDevice_t *device, uint32_t *trackCals);
-mykonosErr_t MYKONOS_setTrackingCalState(mykonosDevice_t *device, mykonosTrackingCalibrations_t trackingCal, uint8_t trackCalState);
-mykonosErr_t MYKONOS_getTrackingCalState(mykonosDevice_t *device, mykonosTrackingCalibrations_t trackingCal, uint8_t *trackCalState);
-mykonosErr_t MYKONOS_getEnabledTrackingCals(mykonosDevice_t *device, uint32_t *enableMask);
-mykonosErr_t MYKONOS_getPendingTrackingCals(mykonosDevice_t *device, uint32_t *pendingCalMask);
-mykonosErr_t MYKONOS_getTxLolStatus(mykonosDevice_t *device, mykonosTxChannels_t txChannel, mykonosTxLolStatus_t *txLolStatus);
-mykonosErr_t MYKONOS_getTxQecStatus(mykonosDevice_t *device, mykonosTxChannels_t txChannel, mykonosTxQecStatus_t *txQecStatus);
-
-mykonosErr_t MYKONOS_getRxQecStatus(mykonosDevice_t *device, mykonosRxChannels_t rxChannel, mykonosRxQecStatus_t *rxQecStatus);
-mykonosErr_t MYKONOS_getOrxQecStatus(mykonosDevice_t *device, mykonosObsRxChannels_t orxChannel, mykonosOrxQecStatus_t *orxQecStatus);
-
-mykonosErr_t MYKONOS_setSnifferChannel(mykonosDevice_t *device, mykonosSnifferChannel_t snifferChannel);
-mykonosErr_t MYKONOS_setRadioControlPinMode(mykonosDevice_t *device);
-
-mykonosErr_t MYKONOS_setPathDelay(mykonosDevice_t *device, mykonosPathdelay_t *pathDelay);
-mykonosErr_t MYKONOS_getPathDelay(mykonosDevice_t *device, mykonosPathDelaySel_t select, mykonosPathdelay_t *pathDelay);
-
-mykonosErr_t MYKONOS_getDpdErrorCounters(mykonosDevice_t *device,  mykonosTxChannels_t txChannel, mykonosDpdErrorCounters_t *dpdErrCnt);
-
-/* Low level ARM functions */
-mykonosErr_t MYKONOS_readArmMem(mykonosDevice_t *device, uint32_t address, uint8_t *returnData, uint32_t bytesToRead, uint8_t autoIncrement);
-mykonosErr_t MYKONOS_writeArmMem(mykonosDevice_t *device, uint32_t address, uint8_t *data, uint32_t byteCount);
-mykonosErr_t MYKONOS_writeArmConfig(mykonosDevice_t *device, uint8_t objectId, uint16_t offset, uint8_t *data, uint8_t byteCount);
-mykonosErr_t MYKONOS_readArmConfig(mykonosDevice_t *device, uint8_t objectId, uint16_t offset, uint8_t *data, uint8_t byteCount);
-mykonosErr_t MYKONOS_sendArmCommand(mykonosDevice_t *device, uint8_t opCode,  uint8_t *extendedData, uint8_t extendedDataNumBytes);
-mykonosErr_t MYKONOS_readArmCmdStatus(mykonosDevice_t *device, uint16_t *errorWord, uint16_t *statusWord);
-mykonosErr_t MYKONOS_readArmCmdStatusByte(mykonosDevice_t *device, uint8_t opCode, uint8_t *cmdStatByte);
-mykonosErr_t MYKONOS_waitArmCmdStatus(mykonosDevice_t *device, uint8_t opCode, uint32_t timeoutMs, uint8_t *cmdStatByte);
-mykonosErr_t MYKONOS_writeArmProfile(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_loadAdcProfiles(mykonosDevice_t *device);
-
-
-/*
- *****************************************************************************
- * JESD204B Datapath Functions
- *****************************************************************************
- */
-/* Functions to setup the JESD204B IP */
-mykonosErr_t MYKONOS_resetDeframer(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_setupSerializers(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_setupDeserializers(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_setupJesd204bFramer(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_setupJesd204bObsRxFramer(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_setupJesd204bDeframer(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_enableRxFramerLink(mykonosDevice_t *device, uint8_t enable);
-mykonosErr_t MYKONOS_enableObsRxFramerLink(mykonosDevice_t *device, uint8_t enable);
-
-/* Functions to initialize the JESD204B link */
-mykonosErr_t MYKONOS_enableMultichipSync(mykonosDevice_t *device, uint8_t enableMcs, uint8_t *mcsStatus);
-mykonosErr_t MYKONOS_enableSysrefToRxFramer(mykonosDevice_t *device, uint8_t enable);
-mykonosErr_t MYKONOS_enableSysrefToObsRxFramer(mykonosDevice_t *device, uint8_t enable);
-mykonosErr_t MYKONOS_enableSysrefToDeframer(mykonosDevice_t *device, uint8_t enable);
-
-/* Functions to help debug the JESD204B link */
-mykonosErr_t MYKONOS_readRxFramerStatus(mykonosDevice_t *device, uint8_t *framerStatus);
-mykonosErr_t MYKONOS_readOrxFramerStatus(mykonosDevice_t *device, uint8_t *obsFramerStatus);
-mykonosErr_t MYKONOS_readDeframerStatus(mykonosDevice_t *device, uint8_t *deframerStatus);
-mykonosErr_t MYKONOS_getDeframerFifoDepth(mykonosDevice_t *device, uint8_t *fifoDepth, uint8_t *readEnLmfcCount);
-
-/* PRBS debug functions */
-mykonosErr_t MYKONOS_enableRxFramerPrbs(mykonosDevice_t *device, mykonosPrbsOrder_t polyOrder, uint8_t enable);
-mykonosErr_t MYKONOS_enableObsRxFramerPrbs(mykonosDevice_t *device, mykonosPrbsOrder_t polyOrder, uint8_t enable);
-mykonosErr_t MYKONOS_rxInjectPrbsError(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_obsRxInjectPrbsError(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_enableDeframerPrbsChecker(mykonosDevice_t *device, uint8_t lanes, mykonosPrbsOrder_t polyOrder, uint8_t enable);
-mykonosErr_t MYKONOS_clearDeframerPrbsCounters(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_readDeframerPrbsCounters(mykonosDevice_t *device, uint8_t counterSelect, uint32_t *prbsErrorCount);
-
-/* Miscellaneous debug functions */
-mykonosErr_t MYKONOS_jesd204bIlasCheck(mykonosDevice_t *device, uint16_t *mismatch);
-mykonosErr_t MYKONOS_setRxFramerDataSource(mykonosDevice_t *device, uint8_t dataSource);
-mykonosErr_t MYKONOS_setObsRxFramerDataSource(mykonosDevice_t *device, uint8_t dataSource);
-
-/*
- *****************************************************************************
- * Shared Data path functions
- *****************************************************************************
- */
-mykonosErr_t MYKONOS_programFir(mykonosDevice_t *device, mykonosfirName_t filterToProgram, mykonosFir_t *firFilter);
-mykonosErr_t MYKONOS_readFir(mykonosDevice_t *device, mykonosfirName_t filterToRead, mykonosFir_t *firFilter);
-
-/*
- *****************************************************************************
- * Rx Data path functions
- *****************************************************************************
- */
-mykonosErr_t MYKONOS_programRxGainTable(mykonosDevice_t *device, uint8_t *gainTablePtr, uint8_t numGainIndexesInTable, mykonosGainTable_t rxChannel);
-mykonosErr_t MYKONOS_setRx1ManualGain(mykonosDevice_t *device, uint8_t gainIndex);
-mykonosErr_t MYKONOS_setRx2ManualGain(mykonosDevice_t *device, uint8_t gainIndex);
-mykonosErr_t MYKONOS_getRx1Gain(mykonosDevice_t *device, uint8_t *rx1GainIndex);
-mykonosErr_t MYKONOS_getRx2Gain(mykonosDevice_t *device, uint8_t *rx2GainIndex);
-mykonosErr_t MYKONOS_setupRxAgc(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_resetRxAgc(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_setRxAgcMinMaxGainIndex(mykonosDevice_t *device, mykonosRxChannels_t rxChannelSelect, uint8_t maxGainIndex, uint8_t minGainIndex);
-mykonosErr_t MYKONOS_setObsRxAgcMinMaxGainIndex(mykonosDevice_t *device, mykonosObsRxChannels_t obsRxChannelSelect, uint8_t maxGainIndex, uint8_t minGainIndex);
-mykonosErr_t MYKONOS_setRx1TempGainComp(mykonosDevice_t *device, int16_t rx1TempCompGain_mdB);
-mykonosErr_t MYKONOS_getRx1TempGainComp(mykonosDevice_t *device, int16_t *rx1TempCompGain_mdB);
-mykonosErr_t MYKONOS_setRx2TempGainComp(mykonosDevice_t *device, int16_t rx2TempCompGain_mdB);
-mykonosErr_t MYKONOS_getRx2TempGainComp(mykonosDevice_t *device, int16_t *rx2TempCompGain_mdB);
-mykonosErr_t MYKONOS_setObsRxTempGainComp(mykonosDevice_t *device, int16_t obsRxTempCompGain_mdB);
-mykonosErr_t MYKONOS_getObsRxTempGainComp(mykonosDevice_t *device, int16_t *obsRxTempCompGain_mdB);
-mykonosErr_t MYKONOS_enableRxGainCtrSyncPulse(mykonosDevice_t *device, uint8_t enable);
-mykonosErr_t MYKONOS_setRxGainControlMode(mykonosDevice_t *device, mykonosGainMode_t mode);
-mykonosErr_t MYKONOS_getRx1DecPower(mykonosDevice_t *device, uint16_t *rx1DecPower_mdBFS);
-mykonosErr_t MYKONOS_getRx2DecPower(mykonosDevice_t *device, uint16_t *rx2DecPower_mdBFS);
-
-/*
- *****************************************************************************
- * Observation Rx Data path functions
- *****************************************************************************
- */
-mykonosErr_t MYKONOS_setDefaultObsRxPath(mykonosDevice_t *device,  mykonosObsRxChannels_t defaultObsRxCh);
-mykonosErr_t MYKONOS_setObsRxPathSource(mykonosDevice_t *device, mykonosObsRxChannels_t obsRxCh);
-mykonosErr_t MYKONOS_getObsRxPathSource(mykonosDevice_t *device, mykonosObsRxChannels_t *obsRxCh);
-mykonosErr_t MYKONOS_setObsRxManualGain(mykonosDevice_t *device, mykonosObsRxChannels_t obsRxCh, uint8_t gainIndex);
-mykonosErr_t MYKONOS_getObsRxGain(mykonosDevice_t *device, uint8_t *gainIndex);
-mykonosErr_t MYKONOS_setupObsRxAgc(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_enableObsRxGainCtrSyncPulse(mykonosDevice_t *device, uint8_t enable);
-mykonosErr_t MYKONOS_setObsRxGainControlMode(mykonosDevice_t *device, mykonosGainMode_t mode);
-mykonosErr_t MYKONOS_getObsRxDecPower(mykonosDevice_t *device, uint16_t *obsRxDecPower_mdBFS);
-
-/*
- *****************************************************************************
- * Tx Data path functions
- *****************************************************************************
- */
-mykonosErr_t MYKONOS_setTx1Attenuation(mykonosDevice_t *device, uint16_t tx1Attenuation_mdB);
-mykonosErr_t MYKONOS_setTx2Attenuation(mykonosDevice_t *device, uint16_t tx2Attenuation_mdB);
-mykonosErr_t MYKONOS_getTx1Attenuation(mykonosDevice_t *device, uint16_t *tx1Attenuation_mdB);
-mykonosErr_t MYKONOS_getTx2Attenuation(mykonosDevice_t *device, uint16_t *tx2Attenuation_mdB);
-mykonosErr_t MYKONOS_getTxFilterOverRangeStatus(mykonosDevice_t *device, uint8_t *txFilterStatus);
-mykonosErr_t MYKONOS_enableTxNco(mykonosDevice_t *device, uint8_t enable, int32_t tx1ToneFreq_kHz, int32_t tx2ToneFreq_kHz);
-
-/*
- *****************************************************************************
- * PA Protection Functions
- *****************************************************************************
- */
-mykonosErr_t MYKONOS_setupPaProtection(mykonosDevice_t *device, uint16_t powerThreshold, uint8_t attenStepSize, uint8_t avgDuration, uint8_t stickyFlagEnable, uint8_t txAttenControlEnable);
-mykonosErr_t MYKONOS_enablePaProtection(mykonosDevice_t *device, uint8_t enable);
-mykonosErr_t MYKONOS_getDacPower(mykonosDevice_t *device, mykonosTxChannels_t channel, uint16_t *channelPower);
-mykonosErr_t MYKONOS_getPaProtectErrorFlagStatus(mykonosDevice_t *device, uint8_t *errorFlagStatus);
-mykonosErr_t MYKONOS_clearPaErrorFlag(mykonosDevice_t *device);
-
-/*
- *****************************************************************************
- * Low level functions and helper functions. BBP should not need to call
- *****************************************************************************
- */
-const char* getMykonosErrorMessage(mykonosErr_t errorCode);
-
-mykonosErr_t MYKONOS_initSubRegisterTables(mykonosDevice_t *device);
-mykonosErr_t MYKONOS_setTxPfirSyncClk(mykonosDevice_t *device); /* Helper function */
-mykonosErr_t MYKONOS_setRxPfirSyncClk(mykonosDevice_t *device); /* Helper function */
-
-/*
- *****************************************************************************
- * Functions to configure DC offsets
- *****************************************************************************
- */
-mykonosErr_t MYKONOS_setRfDcOffsetCnt(mykonosDevice_t *device, mykonosDcOffsetChannels_t channel, uint16_t measureCount);
-mykonosErr_t MYKONOS_getRfDcOffsetCnt(mykonosDevice_t *device, mykonosDcOffsetChannels_t channel, uint16_t *measureCount);
-mykonosErr_t MYKONOS_setDigDcOffsetMShift(mykonosDevice_t *device, mykonosDcOffsetChannels_t channel, uint8_t mShift);
-mykonosErr_t MYKONOS_getDigDcOffsetMShift(mykonosDevice_t *device, mykonosDcOffsetChannels_t channel, uint8_t *mShift);
-mykonosErr_t MYKONOS_setDigDcOffsetEn(mykonosDevice_t *device, uint8_t enableMask);
-mykonosErr_t MYKONOS_getDigDcOffsetEn(mykonosDevice_t *device, uint8_t *enableMask);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
@@ -1,136 +0,0 @@
-/**
- * \file mykonosMmap.c
- * \brief Contains the Mykonos memory mapping
- *
- * Mykonos API version: 1.5.2.3566
- */
-
-/**
-* \page Disclaimer Legal Disclaimer
-* Copyright 2015-2017 Analog Devices Inc.
-* Released under the AD9371 API license, for more information see the "LICENSE.txt" file in this zip file.
-*
-*/
-
-#include <stdint.h>
-uint8_t mykonosMmap [] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x13,0x03,0x03,0x13,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
-                                 0x00,0xE4,0xE4,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xA5,0xA5,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x01,0x00,0xE4,0xE4,0x00,0x00,0x00,0x1F,0x00,0x14,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x9F,0xE0,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0xF5,0x8F,0x0F,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-                                 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
-/*!< Mykonos memory map */
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
josh	7f913a6d81	feat: 完成地检工程的修改, mpc暂不可用	2025-05-23 14:48:13 +08:00
josh	d377311d51	fix: 遗漏了部分注释	2025-05-23 08:35:40 +08:00
josh	e2c4733a93	feat: 修改通过SDK编译	2025-05-22 22:14:10 +08:00
josh	d8ed94bf2b	feat: 完成业务部分修改	2025-05-21 17:12:04 +08:00
josh	169cb6bd91	fix: 修正建网数据打包, 增加routine处理分支	2025-05-21 17:11:38 +08:00
josh	6d665eb853	feat: 完成扫描建网的修改, 移除建网状态机, 收到入网帧即入网	2025-05-21 10:23:38 +08:00
josh	b8e8c6272a	feat: 移除扫描建网状态机, 收到基准分发数据包即为建网成功	2025-05-19 16:50:06 +08:00
josh	6b5ab3dc59	feat: 完成扫描建网大框架修改	2025-05-19 16:29:26 +08:00
josh	0339fd03c3	feat: 更新天线控制逻辑	2025-05-19 14:35:16 +08:00
josh	a6aff34dee	feat: 完成链路层大框架修改	2025-05-16 21:11:31 +08:00
josh	08e1965a8e	feat: 更新物理层接口, 删除波束相关内容, 增加天线ID, 修改天线模式配置	2025-05-16 20:34:51 +08:00
josh	0753c698f7	feat: 更新L1帧类型定义, 更新天线控制相关结构体	2025-05-14 14:23:34 +08:00
josh	0c5fc1ec2b	feat: 根据HJSL硬件修改相关profile	2025-05-13 15:45:59 +08:00
Gatsby Van	a24d8e8d35	update (GJB8114)	2024-07-04 11:01:59 +08:00
Gatsby Van	3e7060965e	misc update: make it more conform with GJB-8114	2024-06-27 13:37:51 +08:00
Gatsby Van	fd9e7f54eb	update make file	2024-06-25 11:00:10 +08:00
Gatsby Van	f8212892a2	avoid usage of goto`	2024-06-25 10:59:54 +08:00
bit-cyber-fh	884d9bcca9	update hardware validation constrain	2024-06-12 10:28:38 +08:00
Gatsby Van	5af74419e0	update calibration data script.	2024-06-10 21:46:03 +08:00
Gatsby Van	f0b28b55fb	update calibration data	2024-06-10 21:23:59 +08:00
bit-cyber-fh	97b8f28e70	update calibration data (add LJ02)	2024-05-23 18:23:06 +08:00
bit-cyber-fh	608bbf1cfa	add LJ06 calibration data	2024-05-23 18:16:56 +08:00
bit-cyber-fh	711cb50658	Merge branch 'master' of http://nas.gatsby.icu:3000/gatsby/df_datalink	2024-05-23 18:16:15 +08:00
bit-cyber-fh	746e87df86	add calibration data	2024-05-23 18:14:24 +08:00
bit-cyber-fh	fa24e0f109	add 9361 rx gain config	2024-05-23 18:11:36 +08:00
bit-cyber-fh	40fdf13fd1	Revert "misc update" This reverts commit 268e724c72ca625fadaad6897a273ffc21e3f723.	2024-05-23 18:06:34 +08:00
bit-cyber-fh	55cd53b746	misc update	2024-05-23 18:03:29 +08:00
bit-cyber-fh	c7c81ddb83	clear calibration data	2024-05-23 17:42:42 +08:00
bit-cyber-fh	52f9390981	Merge branch 'master' of http://nas.gatsby.icu:3000/gatsby/df_datalink	2024-05-23 17:41:46 +08:00
bit-cyber-fh	475a625663	update calibration data	2024-05-23 17:41:41 +08:00
bit-cyber-fh	7b36324101	update calibration data	2024-05-23 17:38:09 +08:00
Gatsby Van	c9f827661b	misc update	2024-05-23 11:25:39 +08:00
bit-cyber-fh	475314f2a5	Merge branch 'master' of http://nas.gatsby.icu:3000/gatsby/df_datalink	2024-05-22 16:22:38 +08:00
bit-cyber-fh	68396cb7ac	misc update	2024-05-22 16:22:18 +08:00
Gatsby Van	688534c117	*bugfix: correct head node default cxn2Net value	2024-05-20 19:14:41 +08:00
Gatsby Van	98ec0e7855	*add calibration data	2024-05-20 17:15:59 +08:00
bit-cyber-fh	45a13b9c5d	*add calibration data	2024-05-20 17:05:42 +08:00
Gatsby Van	f7f3d76d9a	simplified makecopy	2024-04-19 17:47:05 +08:00
bit-cyber-fh	f8985df185	update calibration data	2024-04-19 17:33:00 +08:00
bit-cyber-fh	fdc37dab4a	pluginUpdate: add node id pint	2024-04-07 17:01:15 +08:00
bit-cyber-fh	cfc538bd4d	bugfix: avoid confirm frame reception missing	2024-04-07 16:57:29 +08:00
Gatsby Van	da1659a582	misc update	2024-04-02 00:17:39 +08:00
bit-cyber-fh	f363d3afba	misc update	2024-04-02 00:05:54 +08:00
bit-cyber-fh	ff4b609a37	*add physical ID	2024-04-02 00:05:35 +08:00
bit-cyber-fh	bbdaa49d53	*add calibration setting	2024-04-02 00:04:21 +08:00
bit-cyber-fh	06169451f8	misc update	2024-03-28 16:15:26 +08:00
bit-cyber-fh	c763f1a481	misc update	2024-03-28 15:59:02 +08:00
bit-cyber-fh	8d72288675	Better struct comment	2024-03-28 15:58:15 +08:00
bit-cyber-fh	16d1ad30a7	unified indentation	2024-03-28 15:25:58 +08:00
Gatsby Van	8779c9855e	omit hopping pattern configure methods	2024-03-28 11:04:29 +08:00
bit-cyber-fh	69a8d9d36d	Update Comment: Better Doxygen Style	2024-03-28 11:00:12 +08:00
Gatsby Van	41964520a8	misc fix	2024-03-28 00:05:34 +08:00
bit-cyber-fh	bab91e13df	Common Update: Better Doxygen Style	2024-03-28 00:00:59 +08:00
Gatsby Van	9b416114a1	BSP update: trim unnecessary memory	2024-03-25 13:14:52 +08:00
Gatsby Van	e7b45ae1f5	BSP update: trim unnecessary memory	2024-03-24 22:13:44 +08:00
Gatsby Van	3edfce69f2	update physical layer logging scheme	2024-03-24 22:13:22 +08:00
Gatsby Van	ad3bc29cfa	trim trailing space	2024-03-24 22:05:15 +08:00
Gatsby Van	02fd467708	update test data	2024-03-24 22:04:48 +08:00
Gatsby Van	1fc4fad5ea	Merge remote-tracking branch 'refs/remotes/origin/master'	2024-03-22 10:32:07 +08:00
Gatsby Van	957672a191	add test data	2024-03-21 16:22:47 +08:00
Gatsby Van	807b045b75	code simplification	2024-03-20 16:24:05 +08:00
Gatsby Van	6f4774f6b8	add missing logging update	2024-03-20 15:57:21 +08:00
Gatsby Van	de5759b392	*add feature: frame type specialized attenuation	2024-03-20 15:14:50 +08:00
Gatsby Van	2b18765563	misc update	2024-03-18 20:21:46 +08:00
Gatsby Van	03a6d86a3a	remove unused variables	2024-03-18 11:04:41 +08:00
Gatsby Van	729bbeb60e	format and cleanup	2024-03-18 11:02:20 +08:00
Gatsby Van	33545b63e1	config logic simplification	2024-03-18 11:01:56 +08:00
Gatsby Van	6c64421336	update scan frame handling schedule	2024-03-18 11:00:22 +08:00
Gatsby Van	dda9d09f2a	new linklayer api L2_isStarted	2024-03-18 10:58:16 +08:00
Gatsby Van	14f2be3053	update link brock threshold	2024-03-18 10:57:49 +08:00
Gatsby Van	b7607a7a1b	cleanup and misc update	2024-03-16 16:57:21 +08:00
Gatsby Van	c07cd00f2f	comment update and cleanup	2024-03-16 16:26:03 +08:00
Gatsby Van	20da80f6c2	update packet logging method	2024-03-16 16:25:44 +08:00
Gatsby Van	c7e3eb2800	*shorten time frame length	2024-03-16 16:20:39 +08:00
Gatsby Van	9acdd0609a	update svcFSM	2024-03-16 16:19:15 +08:00
Gatsby Van	66529637a3	add comment add enhance code coherent	2024-03-16 16:18:03 +08:00
Gatsby Van	62cc15c3d4	add beampattern refreash method	2024-03-16 13:20:04 +08:00
Gatsby Van	98e6935d9a	*bugfix: add missing beam steer	2024-03-16 13:19:42 +08:00
Gatsby Van	0c6d861620	cleanup	2024-03-16 13:18:16 +08:00
Gatsby Van	f6c2568a75	update scan frame content	2024-03-14 21:39:22 +08:00
Gatsby Van	ef1c41b500	update beam scan scheme	2024-03-14 21:24:22 +08:00
Gatsby Van	9a7b89ca82	correct slave node beam setting	2024-03-14 21:22:29 +08:00
Gatsby Van	80035d5208	omit redunsant code	2024-03-14 21:21:57 +08:00
Gatsby Van	ab7ce2e082	update plugin	2024-03-14 21:21:23 +08:00
Gatsby Van	f5aca7d5cf	update MPC	2024-03-13 17:01:07 +08:00
Gatsby Van	c3e0c7a66a	clean uo & enhance coherence	2024-03-12 20:49:24 +08:00
Gatsby Van	2898bdfa15	add MPC module to GE project	2024-03-12 20:43:15 +08:00
Gatsby Van	31dcb5aa69	delete systembus module from GE project	2024-03-12 20:42:57 +08:00
Gatsby Van	a1fc87dc97	enhance readability	2024-03-12 20:41:59 +08:00
Gatsby Van	009ddfd895	fix typo	2024-03-12 20:39:38 +08:00
Gatsby Van	222dcb789c	update bsp: add MPC	2024-03-12 17:23:00 +08:00
Gatsby Van	6b016e1181	update systembus: omit redundant code	2024-03-12 11:20:56 +08:00
Gatsby Van	712d37061a	add antenna power mode print	2024-03-07 11:42:22 +08:00
Gatsby Van	dfecadac56	omit redundant code	2024-03-07 11:41:52 +08:00
Gatsby Van	c09bd57408	enhance code inherence	2024-03-07 11:40:53 +08:00
Gatsby Van	ec772ba9e3	add new log entry (phy: antenna power mode)	2024-03-07 11:40:53 +08:00
Gatsby Van	51b96825a3	formatted document	2024-03-06 20:25:43 +08:00
Gatsby Van	274ee8922e	bugfix: missing semicolon	2024-03-06 20:18:50 +08:00
Gatsby Van	8c12c0e755	Merge remote-tracking branch 'origin'	2024-03-06 20:16:09 +08:00
Gatsby Van	1e5f8052e5	plugin update: new lowpower and silient command	2024-03-06 20:08:33 +08:00
Gatsby Van	10c72585de	*add new silent command	2024-03-06 20:03:38 +08:00
Gatsby Van	c3e47b0fae	correct time stamp	2024-03-06 20:03:15 +08:00
Gatsby Van	60033f36a7	omit redundant code	2024-03-06 20:02:38 +08:00
Gatsby Van	582cbd57af	*bugfix: ommit extra event trigger	2024-03-06 20:01:34 +08:00
Gatsby Van	34b851fab7	delete trailing blank space	2024-03-05 21:31:06 +08:00
Gatsby Van	8ffcb8b048	correct byte order	2024-03-05 21:30:44 +08:00
Gatsby Van	b0067e53a6	remove redundant code	2024-03-05 21:29:56 +08:00
Gatsby Van	3073a2767b	bugfix: correct line break	2024-03-05 21:01:01 +08:00
Gatsby Van	7818a754c6	update plugin: add retrieved data print	2024-03-05 20:40:41 +08:00
Gatsby Van	b99d0bfca0	*bugfix: correct beam setup	2024-03-02 16:32:36 +08:00
Gatsby Van	3dedebbe79	miscellaneous update	2024-03-02 16:32:12 +08:00
Gatsby Van	22417853dd	enhanced code inherence	2024-03-02 13:14:17 +08:00
Gatsby Van	633f6dff37	bugfix: correct api call	2024-03-02 13:13:20 +08:00
Gatsby Van	1192f7b4cd	revise beam pattern	2024-03-01 21:27:37 +08:00
Gatsby Van	871c9882b4	add api (Phy_LastScanBeamNo)	2024-03-01 21:27:21 +08:00
Gatsby Van	04a75154c5	add beam steering	2024-03-01 21:27:00 +08:00
Gatsby Van	f1e1ddf48f	complete linklayer logging	2024-03-01 21:26:28 +08:00
Gatsby Van	09cc2ce347	*add antenna info configs (scan beam directions)	2024-03-01 21:25:15 +08:00
Gatsby Van	0c270df599	add antenna bram control	2024-03-01 19:25:33 +08:00
Gatsby Van	8be194a410	miscellaneous update	2024-02-22 17:31:20 +08:00
Gatsby Van	ea5d6e0962	*bugfix: add missing return value	2024-02-22 16:30:25 +08:00
Gatsby Van	7edb8cb3f0	*bugfix: add hardware status to remote check	2024-02-22 16:27:22 +08:00
Gatsby Van	6299d8982d	fix typo	2024-02-22 16:26:01 +08:00
Gatsby Van	8af1439087	update hopping pattern	2024-02-22 16:25:49 +08:00
Gatsby Van	95041a8395	*bugfix: correct hardware status determination	2024-02-22 16:25:32 +08:00
Gatsby Van	5cabf2ab65	add comtool python plugin	2024-02-22 16:17:43 +08:00
Gatsby Van	638b24a6a1	make compatible withe BSD sed	2024-02-21 21:06:58 +08:00
Gatsby Van	2b74942521	add hardware configuration files	2024-02-20 17:40:56 +08:00
Gatsby Van	597ea2c7cd	formatted	2024-02-20 17:40:18 +08:00
Gatsby Van	6d08ee216a	*split hardware configurations to individual files	2024-02-20 17:40:04 +08:00
Gatsby Van	d87a4434c7	update ad temperate reading api	2024-02-20 17:39:32 +08:00
Gatsby Van	c27d6fc455	adapted to new log content definition	2024-02-20 13:13:57 +08:00
Gatsby Van	0701eb6f43	*update log content	2024-02-20 13:13:28 +08:00
Gatsby Van	ffc9f22694	omit redundant api	2024-02-20 13:12:49 +08:00
Gatsby Van	c7898003c0	*add clock and ad status update api	2024-02-20 11:22:56 +08:00
Gatsby Van	2c45d1e5b8	add missing remote test	2024-02-01 17:09:59 +08:00
Gatsby Van	9412f65c3c	*bugfix: correct memcpy offset	2024-02-01 17:09:37 +08:00
Gatsby Van	c0ebef41ee	*bugfix: correct type definition	2024-02-01 17:08:51 +08:00
Gatsby Van	a2c6ff83f7	missing semicolon	2024-02-01 15:12:34 +08:00
Gatsby Van	73b8ee8bc5	*bugfix: correct antenna status code	2024-02-01 15:09:26 +08:00
Gatsby Van	d8fbdfb8e6	*bugfix: add missing hardware status fetching	2024-02-01 15:07:48 +08:00
Gatsby Van	ff87644416	trim trailing white spaces	2024-02-01 15:05:53 +08:00
Gatsby Van	adcf7200bc	*add new routine mode	2024-02-01 15:05:14 +08:00
Gatsby Van	f71ce6bd94	add remote test response	2024-02-01 14:57:13 +08:00
Gatsby Van	c8b0ca74a3	adapted to new system monitor api	2024-02-01 14:56:58 +08:00
Gatsby Van	1a413e4d06	adapted to new system monitor api	2024-02-01 14:56:28 +08:00
Gatsby Van	b7a337f821	update hardware status refresh api	2024-02-01 14:55:16 +08:00
Gatsby Van	38b7f6b985	omit unused code	2024-02-01 14:54:43 +08:00
Gatsby Van	4457eb8bc1	*packed log structs	2024-02-01 14:54:13 +08:00
Gatsby Van	0248c185e4	change hardware status refresh api	2024-02-01 14:53:26 +08:00
Gatsby Van	e81be59bbb	omit unnecessary reconfiguration	2024-02-01 13:45:03 +08:00
Gatsby Van	d0aad73ce5	*bugfix: correct register address	2024-02-01 13:42:26 +08:00
Gatsby Van	c384bf9e9d	*bugfix: correct frequency estimation calculating process	2024-02-01 13:42:02 +08:00
Gatsby Van	752e9b3081	*add hardware status check	2024-02-01 13:41:17 +08:00
Gatsby Van	81fdd612ce	*bugfix: correct physical logging	2024-02-01 13:38:38 +08:00
Gatsby Van	ad3a6be9b1	add voltage validation check	2024-02-01 13:37:41 +08:00
Gatsby Van	6a680a1291	update voltage scale	2024-02-01 13:37:27 +08:00
Gatsby Van	1f98662ee8	implement api	2024-01-31 20:22:07 +08:00
Gatsby Van	73f236bbd3	*bugfix: correct register define	2024-01-31 20:13:23 +08:00
Gatsby Van	223a772582	add register status code	2024-01-31 20:10:15 +08:00
Gatsby Van	3a99da8b76	*bugfix: name error	2024-01-31 20:09:48 +08:00
Gatsby Van	d9ce3ae207	omit redundant code	2024-01-31 20:09:32 +08:00
Gatsby Van	29d5ec32cb	fix warnings	2024-01-31 20:09:14 +08:00
Gatsby Van	45080efd34	service FSM add bit error rate and packet loss rate log	2024-01-31 20:08:52 +08:00
Gatsby Van	b5acfcf827	add emulation option	2024-01-31 20:07:52 +08:00
Gatsby Van	bf2a199f79	update config check	2024-01-31 20:07:30 +08:00
Gatsby Van	15e0fc2e39	*add physical logging	2024-01-31 19:49:30 +08:00
Gatsby Van	bd51428bca	*new time sync api implementation	2024-01-31 19:48:58 +08:00
Gatsby Van	d15dd7ece5	*adapted to new time sync api	2024-01-31 19:47:29 +08:00
Gatsby Van	e308a61abc	*add service data logging	2024-01-31 19:47:11 +08:00
Gatsby Van	b9e055c039	naming enhance	2024-01-31 19:46:45 +08:00
Gatsby Van	2700e7442e	add new physical status registers	2024-01-31 19:46:16 +08:00
Gatsby Van	653483a68e	adapted to new time sync api	2024-01-31 19:45:22 +08:00
Gatsby Van	d310647fa6	*rewrite linklayer logging	2024-01-31 19:44:20 +08:00
Gatsby Van	d2eee6548f	redesign linklayer logging	2024-01-31 19:43:59 +08:00
Gatsby Van	28a2767efc	*update time sync api	2024-01-31 19:43:29 +08:00
Gatsby Van	3dbf893347	redesign logging process	2024-01-31 19:42:25 +08:00
Gatsby Van	070face8d3	redesign logging api	2024-01-31 19:41:25 +08:00
Gatsby Van	bfa0d40996	omit unused code	2024-01-31 19:41:06 +08:00
Gatsby Van	9fcfcce584	update logging content	2024-01-31 19:40:39 +08:00
Gatsby Van	f8dec485c5	miscellaneous update	2024-01-31 16:41:28 +08:00
Gatsby Van	b27bc16ab0	fix typo	2024-01-31 16:10:16 +08:00
Gatsby Van	99e564476b	miscellaneous update	2024-01-31 16:08:27 +08:00
Gatsby Van	4d5a4ec0da	adapted to new hardware status refresh api	2024-01-31 16:08:16 +08:00
Gatsby Van	2f63058882	omit redundant api	2024-01-31 16:07:41 +08:00
Gatsby Van	413c984e85	*update self test response (add full hardware status info)	2024-01-31 16:07:12 +08:00
Gatsby Van	448895866a	new hardware status refresh api	2024-01-31 16:06:31 +08:00
Gatsby Van	aba91e02b0	*update hardware status content.	2024-01-31 16:05:59 +08:00
Gatsby Van	56d0fd80d0	*safer api	2024-01-31 16:05:09 +08:00
Gatsby Van	6acd4b1ca0	*update hardware status logging content	2024-01-31 16:04:09 +08:00
Gatsby Van	f4175cd7b5	code simplify	2024-01-31 10:18:40 +08:00
Gatsby Van	678bb7f393	update error handling	2024-01-31 10:18:14 +08:00
Gatsby Van	085e5cea93	*bugfix: avoid unnecessary reconfiguration	2024-01-31 10:17:43 +08:00
Gatsby Van	3916b18a6f	remove blank line	2024-01-31 10:10:24 +08:00
Gatsby Van	74d20c1010	omit redundant code	2024-01-31 10:10:05 +08:00
Gatsby Van	25d89b30a1	omit redundant code	2024-01-31 10:06:32 +08:00
Gatsby Van	632b1ec636	*update system_monitor api (simplified)	2024-01-31 10:05:43 +08:00