add hardware configuration files

df_datalink_ge/src/hardware/headless.h

@@ -1,7 +1,7 @@
 /*
  * headless.h
  *
- *  Created on: 2021Äê6ÔÂ8ÈÕ
+ *  Created on: 2021��6��8��
  *      Author: Josh
  */
 
@@ -30,7 +30,8 @@
 /**************************** Type Definitions *******************************/
 
 /***************** Macros (Inline Functions) Definitions *********************/
-
+#define HW_PRINT(...)  __asm__("nop")
+// #define HW_PRINT(...)  printf(__VA_ARGS__)
 /************************** Variable Definitions *****************************/
 
 /************************** Function Prototypes ******************************/

df_datalink_ge/src/main.c

@@ -51,33 +51,39 @@ void ScuTimer_IntrHandler(void *context);
 void Systembus_RxIntrHandler(void *context);
 void Systembus_TxIntrHandler(void *context);
 /************************** Constant Definitions *****************************/
-struct callback_desc phy_callback_desc = {
+struct callback_desc phy_callback_desc =
+{
 	.callback = Phy_IntrHandler,
 	.ctx = NULL
 };
 
-struct callback_desc periodicpull_callback_desc = {
+struct callback_desc periodicpull_callback_desc =
+{
 	.callback = PeriodicPull_Handler,
 	.ctx = NULL
 };
 
 
-struct callback_desc sysbus_rx_callback_desc = {
+struct callback_desc sysbus_rx_callback_desc =
+{
 	.callback = Systembus_RxIntrHandler,
 	.ctx = NULL
 };
 
-struct callback_desc sysbus_tx_callback_desc = {
+struct callback_desc sysbus_tx_callback_desc =
+{
 	.callback = Systembus_TxIntrHandler,
 	.ctx = NULL
 };
 
-struct callback_desc scutm_callback_desc = {
+struct callback_desc scutm_callback_desc =
+{
 	.callback = ScuTimer_IntrHandler,
 	.ctx = NULL
 };
 
-L2_CONFIG linkConfig = {
+L2_CONFIG linkConfig =
+{
 	.myType = L2_NODE_HEAD,
 	.clustId = 1,
 	.myId = 1,
@@ -99,16 +105,22 @@ L2_CONFIG linkConfig = {
 // 	.tmcInstPtr = NULL
 // };
 
-static PHY_CONFIG phyConfig = {
+static PHY_CONFIG phyConfig =
+{
 	.devId = 0,
 	.baseAddr = PHY_BASEADDR,
 	.antBramId = PHY_ANTCONFIG_BRAM_DEVICE_ID,
 	.txBramId = PHY_TXBUFF_BRAM_DEVICE_ID,
 	.rxBramId = PHY_RXBUFF_BRAM_DEVICE_ID,
-	.hwXadcId = PHY_HW_XADC_DEVICE_ID
+	.hwXadcId = PHY_HW_XADC_DEVICE_ID,
+	.get_clk_state = NULL,
+	.get_ad_lock_state = NULL,
+	.get_ad0_temp = NULL,
+	.get_ad1_temp = NULL
 };
 
-TMC_CONFIG tmcConfig = {
+TMC_CONFIG tmcConfig =
+{
 	.baseAddr = TIME_CONTROLLER_BASEADDR,
 	.reset = 10
 };

df_datalink_sp/build/src/subdir.mk

@@ -8,15 +8,18 @@ LD_SRCS += \
 
 C_SRCS += \
 ../src/main.c \
-../src/system_monitor.c 
+../src/system_monitor.c \
+../src/hwconfig.c
 
 OBJS += \
 ./src/main.o \
-./src/system_monitor.o 
+./src/system_monitor.o \
+./src/hwconfig.o
 
 C_DEPS += \
 ./src/main.d \
-./src/system_monitor.d 
+./src/system_monitor.d \
+./src/hwconfig.d
 
 
 # Each subdirectory must supply rules for building sources it contributes

df_datalink_sp/src/hwconfig.c

@@ -0,0 +1,464 @@
+/*****************************************************************************/
+/**
+ * Description: hwconfig.h
+ *
+
+ * Date: 2024-02-20 13:19
+ * Last Edit Time: [2024-02-20 13:19]
+ *
+ * Revisions: Rev 0.0
+ * History:
+ * [2023-05-07]: Initial edition.
+ *
+ * Copyright(c) 2024 Beijing Institute of Technology.
+ *
+ ******************************************************************************/
+
+/***************************** Include Files *********************************/
+// Standard
+#include <stdint.h>
+#include <stdbool.h>
+// Xilinx
+#include "xgpiops.h"
+#include "drivers/rf-transceiver/ad9361_reg/ad9361_reg.h"
+#include "drivers/rf-transceiver/ad9361/ad9361_api.h"
+#include "drivers/axi_core/spi_engine/spi_engine.h"
+// App
+#include "common.h"
+#include "error.h"
+#include "delay.h"
+#include "system_monitor.h"
+#include "hwconfig.h"
+#include "config/app_config.h"
+#include "dev_profile/dev_profile.h"
+
+/************************** Function Prototypes ******************************/
+/*********************** Driver Instance Definitions **************************/
+static struct hmc7044_dev *hmc7044_inst;
+static struct ad9361_reg_dev *ad9361_1_reg_inst;
+static struct ad9361_reg_dev *ad9361_2_reg_inst;
+// static struct ad9361_rf_phy *ad9361_phy;
+// static struct ad9361_rf_phy *ad9361_2_phy;
+
+/*****************************************************************************/
+/**
+ * @brief   Hardware_Init
+ *
+ * @param   none.
+ *
+ * @return  None.
+ *
+ ******************************************************************************/
+int32_t Hardware_Init(void)
+{
+	int32_t Status;
+	XGpioPs Gpio;
+	XGpioPs_Config *ConfigPtr;
+	ConfigPtr = XGpioPs_LookupConfig(AD9361_GPIO_DEVICE_ID);
+	Status = XGpioPs_CfgInitialize(&Gpio, ConfigPtr, ConfigPtr->BaseAddr);
+	if (Status != SUCCESS)
+	{
+		return FAILURE;
+	}
+
+	/**********************************************************/
+	/****************** HMC7044 Configuration *****************/
+	/**********************************************************/
+	Status = hmc7044_init(&hmc7044_inst, &hmc7044_default_init_param);
+	if (Status != SUCCESS)
+	{
+		DBG_ERROR("hmc7044_init() error: %" PRId32 "\n", Status);
+		return FAILURE;
+	}
+
+	/**********************************************************/
+	/***************** AD9361-1 Configuration *****************/
+	/**********************************************************/
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_TXNRX, AD9361_GPIO_OUTPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_ENABLE, AD9361_GPIO_OUTPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_EN_AGC, AD9361_GPIO_OUTPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_RESET_B, AD9361_GPIO_OUTPUT);
+
+	ad9361_reg_init(&ad9361_1_reg_inst, &ad9361_1_reg_default_init_param);
+	XGpioPs_WritePin(&Gpio, AD9361_1_ENABLE, 0);
+	ad9361_reg_config(ad9361_1_reg_inst);
+	XGpioPs_WritePin(&Gpio, AD9361_1_ENABLE, 1);
+
+	//	Status = ad9361_init(&ad9361_phy, &ad9361_default_init_param);
+	//	if (Status != XST_SUCCESS){
+	//		return XST_FAILURE;
+	//	}else{
+	//		printf("Configurate AD9361 Completely!\n");
+	//	}
+	//	ad9361_set_tx_fir_config(ad9361_phy, tx_fir_config);
+	//	ad9361_set_rx_fir_config(ad9361_phy, rx_fir_config);
+
+	/**********************************************************/
+	/***************** AD9361-2 Configuration *****************/
+	/**********************************************************/
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_TXNRX, AD9361_GPIO_OUTPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_ENABLE, AD9361_GPIO_OUTPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_EN_AGC, AD9361_GPIO_OUTPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_RESET_B, AD9361_GPIO_OUTPUT);
+
+	ad9361_reg_init(&ad9361_2_reg_inst, &ad9361_2_reg_default_init_param);
+	XGpioPs_WritePin(&Gpio, AD9361_2_ENABLE, 0);
+	ad9361_reg_config(ad9361_2_reg_inst);
+	XGpioPs_WritePin(&Gpio, AD9361_2_ENABLE, 1);
+
+	//	uint8_t rd_back;
+	//	Status = ad9361_reg_read(ad9361_1_reg_inst, 0x0002, &rd_back);
+	//	Status = ad9361_reg_read(ad9361_2_reg_inst, 0x0002, &rd_back);
+
+	/**********************************************************/
+	/******* AD9361 Baseband Multichip Synchronization ********/
+	/**********************************************************/
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_SYNC, AD9361_GPIO_OUTPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_RX_FIFO_RST, AD9361_GPIO_OUTPUT);
+
+	// SYNC BBPLL and DIGITAL SAMPLING CLOCKS
+	ad9361_reg_write(ad9361_1_reg_inst, 0x0001, 0x0D); // MCS RF Enable; MCS BBPLL Enable; MCS BB Enable
+	ad9361_reg_write(ad9361_2_reg_inst, 0x0001, 0x0D);
+	ad9361_reg_write(ad9361_1_reg_inst, 0x0047, 0x80); // MCS refclk Scale Enable
+	ad9361_reg_write(ad9361_2_reg_inst, 0x0047, 0x80);
+	XGpioPs_WritePin(&Gpio, AD9361_SYNC, 0);
+	mdelay(20);
+	XGpioPs_WritePin(&Gpio, AD9361_SYNC, 1); // Input a rising-edge pulse to the SYNC_IN pin
+	mdelay(500);
+	XGpioPs_WritePin(&Gpio, AD9361_SYNC, 0);
+	mdelay(2000);
+	ad9361_reg_write(ad9361_1_reg_inst, 0x0001, 0x0B); // MCS RF Enable; MCS Digital CLK Enable ; MCS BB Enable
+	ad9361_reg_write(ad9361_2_reg_inst, 0x0001, 0x0B);
+	XGpioPs_WritePin(&Gpio, AD9361_SYNC, 1); // Input another rising-edge pulse to the SYNC_IN pin
+	mdelay(500);
+	XGpioPs_WritePin(&Gpio, AD9361_SYNC, 0);
+	ad9361_reg_write(ad9361_1_reg_inst, 0x0001, 0x08); // clear MCS bits
+	ad9361_reg_write(ad9361_2_reg_inst, 0x0001, 0x08);
+
+	XGpioPs_WritePin(&Gpio, AD9361_RX_FIFO_RST, 0);
+	mdelay(20);
+	XGpioPs_WritePin(&Gpio, AD9361_RX_FIFO_RST, 1);
+	mdelay(20);
+	XGpioPs_WritePin(&Gpio, AD9361_RX_FIFO_RST, 0);
+
+	/**********************************************************/
+	/********* AD9361 Multichip Rx Phase Calibration **********/
+	/**********************************************************/
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_TX_SWITCH, AD9361_GPIO_OUTPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_CAL_START, AD9361_GPIO_OUTPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_CAL_DONE, AD9361_GPIO_INPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_CAL_START, AD9361_GPIO_OUTPUT);
+	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_CAL_DONE, AD9361_GPIO_INPUT);
+
+	// switch to lower frequency
+	Status = Hardware_SwitchFreq(ad9361_1_reg_inst, TX_FREQ_126);
+	XGpioPs_WritePin(&Gpio, AD9361_TX_SWITCH, 1);
+	mdelay(20);
+
+	// switch rx channel
+	Status = ad9361_reg_write(ad9361_1_reg_inst, 0x0004, 0x30);
+	Status = ad9361_reg_write(ad9361_2_reg_inst, 0x0004, 0x30);
+
+	// enable dual ad9361 tx channels
+	Status = ad9361_reg_write(ad9361_1_reg_inst, 0x0002, 0xE4); // Setup Tx Digital Filters/ Channels
+
+	// switch ad9361 tx channel
+	Status = ad9361_reg_write(ad9361_1_reg_inst, 0x0004, 0x70); // Select Rx input pin(A,B,C)/ Tx out pin (A,B)
+	mdelay(20);
+
+	// begin to calibrate the 1st ad9361
+	XGpioPs_WritePin(&Gpio, AD9361_1_CAL_START, 0);
+	XGpioPs_WritePin(&Gpio, AD9361_1_CAL_START, 1);
+	mdelay(1);
+	XGpioPs_WritePin(&Gpio, AD9361_1_CAL_START, 0);
+
+	// read calibration status
+	int32_t time_out_cnt = 0;
+	do
+	{
+		mdelay(1); // Wait 1ms
+		time_out_cnt++;
+	} while (((XGpioPs_ReadPin(&Gpio, AD9361_1_CAL_DONE) == 0) && time_out_cnt <= AD9361_TIMEOUT_TH));
+
+	if (time_out_cnt == AD9361_TIMEOUT_TH)
+	{
+		return FAILURE;
+	}
+
+	// begin to calibrate the 2nd ad9361
+	XGpioPs_WritePin(&Gpio, AD9361_2_CAL_START, 1);
+	mdelay(1);
+	XGpioPs_WritePin(&Gpio, AD9361_2_CAL_START, 0);
+
+	// read calibration status
+	time_out_cnt = 0;
+	do
+	{
+		mdelay(1); // Wait 1ms
+		time_out_cnt++;
+	} while (((XGpioPs_ReadPin(&Gpio, AD9361_2_CAL_DONE) == 0) && time_out_cnt <= AD9361_TIMEOUT_TH));
+
+	if (time_out_cnt == AD9361_TIMEOUT_TH)
+	{
+		return FAILURE;
+	}
+
+	// enable single ad9361 tx channels
+	Status = ad9361_reg_write(ad9361_1_reg_inst, 0x0002, 0xA4); // Setup Tx Digital Filters/ Channels
+
+	// switch ad9361 tx & rx channel
+	Status = ad9361_reg_write(ad9361_1_reg_inst, 0x0004, 0x03);
+	Status = ad9361_reg_write(ad9361_2_reg_inst, 0x0004, 0x03);
+
+	// switch to higher frequency
+	Status = Hardware_SwitchFreq(ad9361_1_reg_inst, TX_FREQ_4125);
+	XGpioPs_WritePin(&Gpio, AD9361_TX_SWITCH, 0);
+
+	DBG_PRINT("Done.\n");
+
+	return SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+ * @brief   Hardware_SwitchFreq
+ *
+ * @param   devSysMonitor_UpdateHardwareStatus(newHwState);
+ * @param   freq
+ *
+ * @return  None.
+ *
+ ******************************************************************************/
+int32_t Hardware_SwitchFreq(struct ad9361_reg_dev *dev, ad9361TxFreq freq)
+{
+	int32_t status = 0;
+	uint8_t value = 0;
+	int32_t time_out_cnt = 0;
+
+	switch (freq)
+	{
+	case TX_FREQ_125:
+	{
+		//************************************************************
+		// Setup Tx Frequency-Dependent Syntheisizer Registers
+		//************************************************************
+		status = ad9361_reg_write(dev, 0x027A, 0x4A); // Set VCO Output level[3:0]
+		status = ad9361_reg_write(dev, 0x0279, 0xC1); // Set Init ALC Value[3:0] and VCO Varactor[3:0]
+		status = ad9361_reg_write(dev, 0x0282, 0x0E); // Set VCO Bias Tcf[1:0] and VCO Bias Ref[2:0]
+		status = ad9361_reg_write(dev, 0x0278, 0x78); // Set VCO Cal Offset[3:0]
+		status = ad9361_reg_write(dev, 0x0285, 0x00); // Set VCO Cal Ref Tcf[2:0]
+		status = ad9361_reg_write(dev, 0x0291, 0x0B); // Set VCO Varactor Reference[3:0]
+		status = ad9361_reg_write(dev, 0x0290, 0x70); // Set VCO Varactor Ref Tcf[2:0] and VCO Varactor Offset[3:0]
+		status = ad9361_reg_write(dev, 0x027B, 0x94); // Set Synth Loop Filter charge pump current (Icp)
+		status = ad9361_reg_write(dev, 0x027E, 0xF4); // Set Synth Loop Filter C2 and C1
+		status = ad9361_reg_write(dev, 0x027F, 0xDF); // Set Synth Loop Filter  R1 and C3
+		status = ad9361_reg_write(dev, 0x0280, 0x0A); // Set Synth Loop Filter R3
+
+		//************************************************************
+		// Write Tx Frequency Words
+		//************************************************************
+		status = ad9361_reg_write(dev, 0x0273, 0x00); // Write Tx Synth Fractional Freq Word[7:0]
+		status = ad9361_reg_write(dev, 0x0274, 0x00); // Write Tx Synth Fractional Freq Word[15:8]
+		status = ad9361_reg_write(dev, 0x0275, 0x00); // Write Tx Synth Fractional Freq Word[22:16]
+		status = ad9361_reg_write(dev, 0x0272, 0x00); // Write Tx Synth Integer Freq Word[10:8]
+		status = ad9361_reg_write(dev, 0x0271, 0xA0); // Write Tx Synth Integer Freq Word[7:0] (starts VCO cal)
+		status = ad9361_reg_write(dev, 0x0005, 0x57); // Set LO divider setting
+
+		//************************************************************
+		// Tx Quadrature Calibration Settings
+		//************************************************************
+		status = ad9361_reg_write(dev, 0x00A0, 0x75); // Set TxQuadcal NCO frequency
+		status = ad9361_reg_write(dev, 0x00A3, 0xC0); // Set TxQuadcal NCO frequency (Only update bits [7:6])
+		status = ad9361_reg_write(dev, 0x00A1, 0x7B); // Tx Quad Cal Configuration, Phase and Gain Cal Enable
+		status = ad9361_reg_write(dev, 0x00A9, 0xFF); // Set Tx Quad Cal Count
+		status = ad9361_reg_write(dev, 0x00A2, 0x7F); // Set Tx Quad Cal Kexp
+		status = ad9361_reg_write(dev, 0x00A5, 0x01); // Set Tx Quad Cal Magnitude Threshhold
+		status = ad9361_reg_write(dev, 0x00A6, 0x01); // Set Tx Quad Cal Magnitude Threshhold
+		status = ad9361_reg_write(dev, 0x00AA, 0x22); // Set Tx Quad Cal Gain Table index
+		status = ad9361_reg_write(dev, 0x00A4, 0xF0); // Set Tx Quad Cal Settle Count
+		status = ad9361_reg_write(dev, 0x00AE, 0x00); // Set Tx Quad Cal LPF Gain index incase Split table mode used
+
+		status = ad9361_reg_write(dev, 0x0169, 0xC0); // Disable Rx Quadrature Calibration before Running Tx Quadrature Calibration
+		status = ad9361_reg_write(dev, 0x0016, 0x10); // Start Tx Quad cal
+
+		break;
+	}
+	case TX_FREQ_126:
+	{
+		//************************************************************
+		// Setup Tx Frequency-Dependent Syntheisizer Registers
+		//************************************************************
+		status = ad9361_reg_write(dev, 0x027A, 0x4A); // Set VCO Output level[3:0]
+		status = ad9361_reg_write(dev, 0x0279, 0xC1); // Set Init ALC Value[3:0] and VCO Varactor[3:0]
+		status = ad9361_reg_write(dev, 0x0282, 0x0E); // Set VCO Bias Tcf[1:0] and VCO Bias Ref[2:0]
+		status = ad9361_reg_write(dev, 0x0278, 0x78); // Set VCO Cal Offset[3:0]
+		status = ad9361_reg_write(dev, 0x0285, 0x00); // Set VCO Cal Ref Tcf[2:0]
+		status = ad9361_reg_write(dev, 0x0291, 0x0B); // Set VCO Varactor Reference[3:0]
+		status = ad9361_reg_write(dev, 0x0290, 0x70); // Set VCO Varactor Ref Tcf[2:0] and VCO Varactor Offset[3:0]
+		status = ad9361_reg_write(dev, 0x027B, 0x93); // Set Synth Loop Filter charge pump current (Icp)
+		status = ad9361_reg_write(dev, 0x027E, 0xF4); // Set Synth Loop Filter C2 and C1
+		status = ad9361_reg_write(dev, 0x027F, 0xDF); // Set Synth Loop Filter  R1 and C3
+		status = ad9361_reg_write(dev, 0x0280, 0x0A); // Set Synth Loop Filter R3
+
+		//************************************************************
+		// Write Tx Frequency Words
+		//************************************************************
+		status = ad9361_reg_write(dev, 0x0273, 0x06); // Write Tx Synth Fractional Freq Word[7:0]
+		status = ad9361_reg_write(dev, 0x0274, 0xD7); // Write Tx Synth Fractional Freq Word[15:8]
+		status = ad9361_reg_write(dev, 0x0275, 0x23); // Write Tx Synth Fractional Freq Word[22:16]
+		status = ad9361_reg_write(dev, 0x0272, 0x00); // Write Tx Synth Integer Freq Word[10:8]
+		status = ad9361_reg_write(dev, 0x0271, 0xA1); // Write Tx Synth Integer Freq Word[7:0] (starts VCO cal)
+		status = ad9361_reg_write(dev, 0x0005, 0x57); // Set LO divider setting
+
+		//************************************************************
+		// Tx Quadrature Calibration Settings
+		//************************************************************
+		status = ad9361_reg_write(dev, 0x00A0, 0x75); // Set TxQuadcal NCO frequency
+		status = ad9361_reg_write(dev, 0x00A3, 0xC0); // Set TxQuadcal NCO frequency (Only update bits [7:6])
+		status = ad9361_reg_write(dev, 0x00A1, 0x7B); // Tx Quad Cal Configuration, Phase and Gain Cal Enable
+		status = ad9361_reg_write(dev, 0x00A9, 0xFF); // Set Tx Quad Cal Count
+		status = ad9361_reg_write(dev, 0x00A2, 0x7F); // Set Tx Quad Cal Kexp
+		status = ad9361_reg_write(dev, 0x00A5, 0x01); // Set Tx Quad Cal Magnitude Threshhold
+		status = ad9361_reg_write(dev, 0x00A6, 0x01); // Set Tx Quad Cal Magnitude Threshhold
+		status = ad9361_reg_write(dev, 0x00AA, 0x22); // Set Tx Quad Cal Gain Table index
+		status = ad9361_reg_write(dev, 0x00A4, 0xF0); // Set Tx Quad Cal Settle Count
+		status = ad9361_reg_write(dev, 0x00AE, 0x00); // Set Tx Quad Cal LPF Gain index incase Split table mode used
+
+		status = ad9361_reg_write(dev, 0x0169, 0xC0); // Disable Rx Quadrature Calibration before Running Tx Quadrature Calibration
+		status = ad9361_reg_write(dev, 0x0016, 0x10); // Start Tx Quad cal
+
+		break;
+	}
+	case TX_FREQ_4125:
+	{
+		//************************************************************
+		// Setup Tx Frequency-Dependent Syntheisizer Registers
+		//************************************************************
+		status = ad9361_reg_write(dev, 0x027A, 0x4A); // Set VCO Output level[3:0]
+		status = ad9361_reg_write(dev, 0x0279, 0xC1); // Set Init ALC Value[3:0] and VCO Varactor[3:0]
+		status = ad9361_reg_write(dev, 0x0282, 0x0E); // Set VCO Bias Tcf[1:0] and VCO Bias Ref[2:0]
+		status = ad9361_reg_write(dev, 0x0278, 0x78); // Set VCO Cal Offset[3:0]
+		status = ad9361_reg_write(dev, 0x0285, 0x00); // Set VCO Cal Ref Tcf[2:0]
+		status = ad9361_reg_write(dev, 0x0291, 0x0B); // Set VCO Varactor Reference[3:0]
+		status = ad9361_reg_write(dev, 0x0290, 0x70); // Set VCO Varactor Ref Tcf[2:0] and VCO Varactor Offset[3:0]
+		status = ad9361_reg_write(dev, 0x027B, 0x93); // Set Synth Loop Filter charge pump current (Icp)
+		status = ad9361_reg_write(dev, 0x027E, 0xF4); // Set Synth Loop Filter C2 and C1
+		status = ad9361_reg_write(dev, 0x027F, 0xDF); // Set Synth Loop Filter  R1 and C3
+		status = ad9361_reg_write(dev, 0x0280, 0x0A); // Set Synth Loop Filter R3
+
+		//************************************************************
+		// Write Rx Frequency Words
+		//************************************************************
+		status = ad9361_reg_write(dev, 0x0273, 0x00); // Write Tx Synth Fractional Freq Word[7:0]
+		status = ad9361_reg_write(dev, 0x0274, 0x00); // Write Tx Synth Fractional Freq Word[15:8]
+		status = ad9361_reg_write(dev, 0x0275, 0x00); // Write Tx Synth Fractional Freq Word[22:16]
+		status = ad9361_reg_write(dev, 0x0272, 0x00); // Write Tx Synth Integer Freq Word[10:8]
+		status = ad9361_reg_write(dev, 0x0271, 0xA5); // Write Tx Synth Integer Freq Word[7:0] (starts VCO cal)
+		status = ad9361_reg_write(dev, 0x0005, 0x07); // Set LO divider setting
+
+		//************************************************************
+		// Tx Quadrature Calibration Settings
+		//************************************************************
+		status = ad9361_reg_write(dev, 0x00A0, 0x75); // Set TxQuadcal NCO frequency
+		status = ad9361_reg_write(dev, 0x00A3, 0xC0); // Set TxQuadcal NCO frequency (Only update bits [7:6])
+		status = ad9361_reg_write(dev, 0x00A1, 0x7B); // Tx Quad Cal Configuration, Phase and Gain Cal Enable
+		status = ad9361_reg_write(dev, 0x00A9, 0xFF); // Set Tx Quad Cal Count
+		status = ad9361_reg_write(dev, 0x00A2, 0x7F); // Set Tx Quad Cal Kexp
+		status = ad9361_reg_write(dev, 0x00A5, 0x01); // Set Tx Quad Cal Magnitude Threshhold
+		status = ad9361_reg_write(dev, 0x00A6, 0x01); // Set Tx Quad Cal Magnitude Threshhold
+		status = ad9361_reg_write(dev, 0x00AA, 0x28); // Set Tx Quad Cal Gain Table index
+		status = ad9361_reg_write(dev, 0x00A4, 0xF0); // Set Tx Quad Cal Settle Count
+		status = ad9361_reg_write(dev, 0x00AE, 0x04); // Set Tx Quad Cal LPF Gain index incase Split table mode used
+
+		status = ad9361_reg_write(dev, 0x0169, 0xC0); // Disable Rx Quadrature Calibration before Running Tx Quadrature Calibration
+		status = ad9361_reg_write(dev, 0x0016, 0x10); // Start Tx Quad cal
+
+		break;
+	}
+
+		// Wait for cal to complete (Done when 0x016[4]==0)
+		time_out_cnt = 0;
+		do
+		{
+			status |= ad9361_reg_read(dev, 0x0016, &value);
+			mdelay(1); // Wait 1ms
+			time_out_cnt++;
+		} while ((value & 0x10) != 0x00 && time_out_cnt <= AD9361_TIMEOUT_TH);
+	}
+
+	return status;
+}
+
+// @ Get AD9361 - 1 temperature (Celsius Degree)
+/**
+ * Read corresponding register to get AD9361 - 1 current temperature.
+ */
+int8_t Hardware_GetAD9361Temp_1(void)
+{
+	int8_t scaleTemp;
+
+	ad9361_reg_write(ad9361_1_reg_inst, 0x001D, 0x01); // disable aux adc
+	ad9361_reg_read(ad9361_1_reg_inst, 0x000E, (uint8_t*)&scaleTemp);
+	ad9361_reg_write(ad9361_1_reg_inst, 0x001D, 0x00); // enable aux adc
+
+	return (int8_t) scaleTemp/1.16;
+}
+
+// @ Get AD9361 - 2 temperature (Celsius Degree)
+/**
+ * Read corresponding register to get AD9361 - 2 current temperature.
+ */
+int8_t Hardware_GetAD9361Temp_2(void)
+{
+	int8_t scaleTemp;
+
+	ad9361_reg_write(ad9361_2_reg_inst, 0x001D, 0x01); // disable aux adc
+	ad9361_reg_read(ad9361_2_reg_inst, 0x000E, (uint8_t*)&scaleTemp);
+	ad9361_reg_write(ad9361_2_reg_inst, 0x001D, 0x00); // enable aux adc
+
+	return (int8_t) scaleTemp/1.16;
+}
+
+// @ Determine AD9361 lock state
+/**
+ * Read corresponding register to determine AD9361(both) lock state.
+ */
+uint8_t Hardware_GetAD9361LockStatus(void)
+{
+	uint8_t ret = 0;
+	uint8_t regVal;
+
+	// bbpll
+	ad9361_reg_read(ad9361_1_reg_inst, 0x005E, &regVal); // [D7] is lock indicator
+	ret |= ((regVal & 0x80) == 0x80) ? CLK_AD0_BBPLL_LOCK : 0;
+	ad9361_reg_read(ad9361_2_reg_inst, 0x005E, &regVal); // [D7] is lock indicator
+	ret |= ((regVal & 0x80) == 0x80) ? CLK_AD1_BBPLL_LOCK : 0;
+
+	// rfpll
+	ad9361_reg_read(ad9361_1_reg_inst, 0x0287, &regVal); // [D1] is lock indicator
+	ret |= ((regVal & 0x02) == 0x02) ? CLK_AD0_RFPLL_LOCK : 0;
+	ad9361_reg_read(ad9361_2_reg_inst, 0x0287, &regVal); // [D1] is lock indicator
+	ret |= ((regVal & 0x02) == 0x02) ? CLK_AD1_RFPLL_LOCK : 0;
+
+	return ret;
+}
+
+// @ Determine HMC7044 lock state
+/**
+ * Read corresponding register to determine clock lock state.
+ */
+uint8_t Hardware_GetHMC7044LockStatus(void)
+{
+	uint8_t ret = 0;
+	uint8_t regVal;
+
+	// pll1
+	hmc7044_read(hmc7044_inst, 0x007C, &regVal); // [D5] is lock indicator
+	ret |= ((regVal & 0xE0) != 0x00) ? CLK_SP_PLL0_LOCK : 0;
+
+	// pll2
+	hmc7044_read(hmc7044_inst, 0x007D, &regVal); // [D0] is lock indicator
+	ret |= ((regVal & 0x01) == 0x01) ? CLK_SP_PLL1_LOCK : 0;
+
+	return ret;
+}

df_datalink_sp/src/hwconfig.h

@@ -0,0 +1,32 @@
+/*****************************************************************************/
+/**
+ * Description: hwconfig.h
+ *
+
+ * Date: 2024-02-20 13:19
+ * Last Edit Time: [2024-02-20 13:19]
+ *
+ * Revisions: Rev 0.0
+ * History:
+ * [2023-05-07]: Initial edition.
+ *
+ * Copyright(c) 2024 Beijing Institute of Technology.
+ *
+ ******************************************************************************/
+
+/***************************** Include Files *********************************/
+// Standard
+#include <stdint.h>
+#include "config/app_config.h"
+#include "drivers/rf-transceiver/ad9361_reg/ad9361_reg.h"
+#include "drivers/rf-transceiver/ad9361/ad9361_api.h"
+
+/************************** Function Prototypes ******************************/
+int32_t Hardware_Init(void);
+int32_t Hardware_SwitchFreq(struct ad9361_reg_dev *dev, ad9361TxFreq freq);
+int8_t Hardware_GetAD9361Temp_1(void);
+int8_t Hardware_GetAD9361Temp_2(void);
+uint8_t Hardware_GetAD9361LockStatus(void);
+uint8_t Hardware_GetHMC7044LockStatus(void);
+
+

df_datalink_sp/src/main.c

@@ -20,19 +20,15 @@
 #include <stdint.h>
 #include <stdbool.h>
 // Xilinx
-#include "sleep.h"
-#include "xil_cache.h"
 #include "xscugic.h"
-#include "xscutimer.h"
-#include "xgpiops.h"
 #include "drivers/platform/xilinx_irq.h"
 #include "drivers/platform/xilinx_timer.h"
-#include "drivers/rf-transceiver/ad9361/ad9361_api.h"
-#include "drivers/axi_core/spi_engine/spi_engine.h"
 // App
 #include "common.h"
 #include "error.h"
 #include "timer.h"
+#include "hwconfig.h"
+#include "system_monitor.h"
 #include "config/app_config.h"
 #include "dev_profile/dev_profile.h"
 #include "systembus/systembus.h"
@@ -46,6 +42,7 @@ void PeriodicPull_Handler(void *callBackRef);
 void ScuTimer_IntrHandler(void *context);
 void Systembus_RxIntrHandler(void *context);
 void Systembus_TxIntrHandler(void *context);
+
 /************************** Constant Definitions *****************************/
 struct callback_desc phy_callback_desc = {
 	.callback = Phy_IntrHandler,
@@ -101,7 +98,11 @@ static PHY_CONFIG phyConfig = {
 	.antBramId = PHY_ANTCONFIG_BRAM_DEVICE_ID,
 	.txBramId = PHY_TXBUFF_BRAM_DEVICE_ID,
 	.rxBramId = PHY_RXBUFF_BRAM_DEVICE_ID,
-	.hwXadcId = PHY_HW_XADC_DEVICE_ID
+	.hwXadcId = PHY_HW_XADC_DEVICE_ID,
+	.get_clk_state = Hardware_GetHMC7044LockStatus,
+	.get_ad_lock_state = Hardware_GetAD9361LockStatus,
+	.get_ad0_temp = Hardware_GetAD9361Temp_1,
+	.get_ad1_temp = Hardware_GetAD9361Temp_2
 };
 
 TMC_CONFIG tmcConfig = {
@@ -122,11 +123,7 @@ static PHY_INST *phyInstPtr;
 static TMC_INST *tmcInstPtr = NULL;
 L2_INST *linkInstPtr;
 
-static struct hmc7044_dev *hmc7044_inst;
+
-static struct ad9361_reg_dev *ad9361_1_reg_inst;
-static struct ad9361_reg_dev *ad9361_2_reg_inst;
-// static struct ad9361_rf_phy *ad9361_phy;
-// static struct ad9361_rf_phy *ad9361_2_phy;
 /****************************************************************************/
 /**
  * This function is responsible for initializing the SCUGIC instance, looking
@@ -370,355 +367,6 @@ void ScuTimer_IntrHandler(void *context)
 	}
 }
 
-/*****************************************************************************/
-/**
- * @brief   Hardware_SwitchFreq
- *
- * @param   devSysMonitor_UpdateHardwareStatus(newHwState);
- * @param   freq
- *
- * @return  None.
- *
- ******************************************************************************/
-int Hardware_SwitchFreq(struct ad9361_reg_dev *dev, ad9361TxFreq freq)
-{
-	int32_t status = 0;
-	uint8_t value = 0;
-	int32_t time_out_cnt = 0;
-
-	switch (freq)
-	{
-	case TX_FREQ_125:
-	{
-		//************************************************************
-		// Setup Tx Frequency-Dependent Syntheisizer Registers
-		//************************************************************
-		status = ad9361_reg_write(dev, 0x027A, 0x4A); // Set VCO Output level[3:0]
-		status = ad9361_reg_write(dev, 0x0279, 0xC1); // Set Init ALC Value[3:0] and VCO Varactor[3:0]
-		status = ad9361_reg_write(dev, 0x0282, 0x0E); // Set VCO Bias Tcf[1:0] and VCO Bias Ref[2:0]
-		status = ad9361_reg_write(dev, 0x0278, 0x78); // Set VCO Cal Offset[3:0]
-		status = ad9361_reg_write(dev, 0x0285, 0x00); // Set VCO Cal Ref Tcf[2:0]
-		status = ad9361_reg_write(dev, 0x0291, 0x0B); // Set VCO Varactor Reference[3:0]
-		status = ad9361_reg_write(dev, 0x0290, 0x70); // Set VCO Varactor Ref Tcf[2:0] and VCO Varactor Offset[3:0]
-		status = ad9361_reg_write(dev, 0x027B, 0x94); // Set Synth Loop Filter charge pump current (Icp)
-		status = ad9361_reg_write(dev, 0x027E, 0xF4); // Set Synth Loop Filter C2 and C1
-		status = ad9361_reg_write(dev, 0x027F, 0xDF); // Set Synth Loop Filter  R1 and C3
-		status = ad9361_reg_write(dev, 0x0280, 0x0A); // Set Synth Loop Filter R3
-
-		//************************************************************
-		// Write Tx Frequency Words
-		//************************************************************
-		status = ad9361_reg_write(dev, 0x0273, 0x00); // Write Tx Synth Fractional Freq Word[7:0]
-		status = ad9361_reg_write(dev, 0x0274, 0x00); // Write Tx Synth Fractional Freq Word[15:8]
-		status = ad9361_reg_write(dev, 0x0275, 0x00); // Write Tx Synth Fractional Freq Word[22:16]
-		status = ad9361_reg_write(dev, 0x0272, 0x00); // Write Tx Synth Integer Freq Word[10:8]
-		status = ad9361_reg_write(dev, 0x0271, 0xA0); // Write Tx Synth Integer Freq Word[7:0] (starts VCO cal)
-		status = ad9361_reg_write(dev, 0x0005, 0x57); // Set LO divider setting
-
-		//************************************************************
-		// Tx Quadrature Calibration Settings
-		//************************************************************
-		status = ad9361_reg_write(dev, 0x00A0, 0x75); // Set TxQuadcal NCO frequency
-		status = ad9361_reg_write(dev, 0x00A3, 0xC0); // Set TxQuadcal NCO frequency (Only update bits [7:6])
-		status = ad9361_reg_write(dev, 0x00A1, 0x7B); // Tx Quad Cal Configuration, Phase and Gain Cal Enable
-		status = ad9361_reg_write(dev, 0x00A9, 0xFF); // Set Tx Quad Cal Count
-		status = ad9361_reg_write(dev, 0x00A2, 0x7F); // Set Tx Quad Cal Kexp
-		status = ad9361_reg_write(dev, 0x00A5, 0x01); // Set Tx Quad Cal Magnitude Threshhold
-		status = ad9361_reg_write(dev, 0x00A6, 0x01); // Set Tx Quad Cal Magnitude Threshhold
-		status = ad9361_reg_write(dev, 0x00AA, 0x22); // Set Tx Quad Cal Gain Table index
-		status = ad9361_reg_write(dev, 0x00A4, 0xF0); // Set Tx Quad Cal Settle Count
-		status = ad9361_reg_write(dev, 0x00AE, 0x00); // Set Tx Quad Cal LPF Gain index incase Split table mode used
-
-		status = ad9361_reg_write(dev, 0x0169, 0xC0); // Disable Rx Quadrature Calibration before Running Tx Quadrature Calibration
-		status = ad9361_reg_write(dev, 0x0016, 0x10); // Start Tx Quad cal
-
-		break;
-	}
-	case TX_FREQ_126:
-	{
-		//************************************************************
-		// Setup Tx Frequency-Dependent Syntheisizer Registers
-		//************************************************************
-		status = ad9361_reg_write(dev, 0x027A, 0x4A); // Set VCO Output level[3:0]
-		status = ad9361_reg_write(dev, 0x0279, 0xC1); // Set Init ALC Value[3:0] and VCO Varactor[3:0]
-		status = ad9361_reg_write(dev, 0x0282, 0x0E); // Set VCO Bias Tcf[1:0] and VCO Bias Ref[2:0]
-		status = ad9361_reg_write(dev, 0x0278, 0x78); // Set VCO Cal Offset[3:0]
-		status = ad9361_reg_write(dev, 0x0285, 0x00); // Set VCO Cal Ref Tcf[2:0]
-		status = ad9361_reg_write(dev, 0x0291, 0x0B); // Set VCO Varactor Reference[3:0]
-		status = ad9361_reg_write(dev, 0x0290, 0x70); // Set VCO Varactor Ref Tcf[2:0] and VCO Varactor Offset[3:0]
-		status = ad9361_reg_write(dev, 0x027B, 0x93); // Set Synth Loop Filter charge pump current (Icp)
-		status = ad9361_reg_write(dev, 0x027E, 0xF4); // Set Synth Loop Filter C2 and C1
-		status = ad9361_reg_write(dev, 0x027F, 0xDF); // Set Synth Loop Filter  R1 and C3
-		status = ad9361_reg_write(dev, 0x0280, 0x0A); // Set Synth Loop Filter R3
-
-		//************************************************************
-		// Write Tx Frequency Words
-		//************************************************************
-		status = ad9361_reg_write(dev, 0x0273, 0x06); // Write Tx Synth Fractional Freq Word[7:0]
-		status = ad9361_reg_write(dev, 0x0274, 0xD7); // Write Tx Synth Fractional Freq Word[15:8]
-		status = ad9361_reg_write(dev, 0x0275, 0x23); // Write Tx Synth Fractional Freq Word[22:16]
-		status = ad9361_reg_write(dev, 0x0272, 0x00); // Write Tx Synth Integer Freq Word[10:8]
-		status = ad9361_reg_write(dev, 0x0271, 0xA1); // Write Tx Synth Integer Freq Word[7:0] (starts VCO cal)
-		status = ad9361_reg_write(dev, 0x0005, 0x57); // Set LO divider setting
-
-		//************************************************************
-		// Tx Quadrature Calibration Settings
-		//************************************************************
-		status = ad9361_reg_write(dev, 0x00A0, 0x75); // Set TxQuadcal NCO frequency
-		status = ad9361_reg_write(dev, 0x00A3, 0xC0); // Set TxQuadcal NCO frequency (Only update bits [7:6])
-		status = ad9361_reg_write(dev, 0x00A1, 0x7B); // Tx Quad Cal Configuration, Phase and Gain Cal Enable
-		status = ad9361_reg_write(dev, 0x00A9, 0xFF); // Set Tx Quad Cal Count
-		status = ad9361_reg_write(dev, 0x00A2, 0x7F); // Set Tx Quad Cal Kexp
-		status = ad9361_reg_write(dev, 0x00A5, 0x01); // Set Tx Quad Cal Magnitude Threshhold
-		status = ad9361_reg_write(dev, 0x00A6, 0x01); // Set Tx Quad Cal Magnitude Threshhold
-		status = ad9361_reg_write(dev, 0x00AA, 0x22); // Set Tx Quad Cal Gain Table index
-		status = ad9361_reg_write(dev, 0x00A4, 0xF0); // Set Tx Quad Cal Settle Count
-		status = ad9361_reg_write(dev, 0x00AE, 0x00); // Set Tx Quad Cal LPF Gain index incase Split table mode used
-
-		status = ad9361_reg_write(dev, 0x0169, 0xC0); // Disable Rx Quadrature Calibration before Running Tx Quadrature Calibration
-		status = ad9361_reg_write(dev, 0x0016, 0x10); // Start Tx Quad cal
-
-		break;
-	}
-	case TX_FREQ_4125:
-	{
-		//************************************************************
-		// Setup Tx Frequency-Dependent Syntheisizer Registers
-		//************************************************************
-		status = ad9361_reg_write(dev, 0x027A, 0x4A); // Set VCO Output level[3:0]
-		status = ad9361_reg_write(dev, 0x0279, 0xC1); // Set Init ALC Value[3:0] and VCO Varactor[3:0]
-		status = ad9361_reg_write(dev, 0x0282, 0x0E); // Set VCO Bias Tcf[1:0] and VCO Bias Ref[2:0]
-		status = ad9361_reg_write(dev, 0x0278, 0x78); // Set VCO Cal Offset[3:0]
-		status = ad9361_reg_write(dev, 0x0285, 0x00); // Set VCO Cal Ref Tcf[2:0]
-		status = ad9361_reg_write(dev, 0x0291, 0x0B); // Set VCO Varactor Reference[3:0]
-		status = ad9361_reg_write(dev, 0x0290, 0x70); // Set VCO Varactor Ref Tcf[2:0] and VCO Varactor Offset[3:0]
-		status = ad9361_reg_write(dev, 0x027B, 0x93); // Set Synth Loop Filter charge pump current (Icp)
-		status = ad9361_reg_write(dev, 0x027E, 0xF4); // Set Synth Loop Filter C2 and C1
-		status = ad9361_reg_write(dev, 0x027F, 0xDF); // Set Synth Loop Filter  R1 and C3
-		status = ad9361_reg_write(dev, 0x0280, 0x0A); // Set Synth Loop Filter R3
-
-		//************************************************************
-		// Write Rx Frequency Words
-		//************************************************************
-		status = ad9361_reg_write(dev, 0x0273, 0x00); // Write Tx Synth Fractional Freq Word[7:0]
-		status = ad9361_reg_write(dev, 0x0274, 0x00); // Write Tx Synth Fractional Freq Word[15:8]
-		status = ad9361_reg_write(dev, 0x0275, 0x00); // Write Tx Synth Fractional Freq Word[22:16]
-		status = ad9361_reg_write(dev, 0x0272, 0x00); // Write Tx Synth Integer Freq Word[10:8]
-		status = ad9361_reg_write(dev, 0x0271, 0xA5); // Write Tx Synth Integer Freq Word[7:0] (starts VCO cal)
-		status = ad9361_reg_write(dev, 0x0005, 0x07); // Set LO divider setting
-
-		//************************************************************
-		// Tx Quadrature Calibration Settings
-		//************************************************************
-		status = ad9361_reg_write(dev, 0x00A0, 0x75); // Set TxQuadcal NCO frequency
-		status = ad9361_reg_write(dev, 0x00A3, 0xC0); // Set TxQuadcal NCO frequency (Only update bits [7:6])
-		status = ad9361_reg_write(dev, 0x00A1, 0x7B); // Tx Quad Cal Configuration, Phase and Gain Cal Enable
-		status = ad9361_reg_write(dev, 0x00A9, 0xFF); // Set Tx Quad Cal Count
-		status = ad9361_reg_write(dev, 0x00A2, 0x7F); // Set Tx Quad Cal Kexp
-		status = ad9361_reg_write(dev, 0x00A5, 0x01); // Set Tx Quad Cal Magnitude Threshhold
-		status = ad9361_reg_write(dev, 0x00A6, 0x01); // Set Tx Quad Cal Magnitude Threshhold
-		status = ad9361_reg_write(dev, 0x00AA, 0x28); // Set Tx Quad Cal Gain Table index
-		status = ad9361_reg_write(dev, 0x00A4, 0xF0); // Set Tx Quad Cal Settle Count
-		status = ad9361_reg_write(dev, 0x00AE, 0x04); // Set Tx Quad Cal LPF Gain index incase Split table mode used
-
-		status = ad9361_reg_write(dev, 0x0169, 0xC0); // Disable Rx Quadrature Calibration before Running Tx Quadrature Calibration
-		status = ad9361_reg_write(dev, 0x0016, 0x10); // Start Tx Quad cal
-
-		break;
-	}
-
-		// Wait for cal to complete (Done when 0x016[4]==0)
-		time_out_cnt = 0;
-		do
-		{
-			status |= ad9361_reg_read(dev, 0x0016, &value);
-			mdelay(1); // Wait 1ms
-			time_out_cnt++;
-		} while ((value & 0x10) != 0x00 && time_out_cnt <= AD9361_TIMEOUT_TH);
-	}
-
-	return status;
-}
-
-/*****************************************************************************/
-/**
- * @brief   Hardware_Init
- *
- * @param   none.
- *
- * @return  None.
- *
- ******************************************************************************/
-int Hardware_Init(void)
-{
-	int32_t Status;
-	XGpioPs Gpio;
-	XGpioPs_Config *ConfigPtr;
-	ConfigPtr = XGpioPs_LookupConfig(AD9361_GPIO_DEVICE_ID);
-	Status = XGpioPs_CfgInitialize(&Gpio, ConfigPtr, ConfigPtr->BaseAddr);
-	if (Status != SUCCESS)
-	{
-		return FAILURE;
-	}
-
-	/**********************************************************/
-	/****************** HMC7044 Configuration *****************/
-	/**********************************************************/
-	Status = hmc7044_init(&hmc7044_inst, &hmc7044_default_init_param);
-	if (Status != SUCCESS)
-	{
-		DBG_ERROR("hmc7044_init() error: %" PRId32 "\n", Status);
-		return FAILURE;
-	}
-
-	/**********************************************************/
-	/***************** AD9361-1 Configuration *****************/
-	/**********************************************************/
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_TXNRX, AD9361_GPIO_OUTPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_ENABLE, AD9361_GPIO_OUTPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_EN_AGC, AD9361_GPIO_OUTPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_RESET_B, AD9361_GPIO_OUTPUT);
-
-	ad9361_reg_init(&ad9361_1_reg_inst, &ad9361_1_reg_default_init_param);
-	XGpioPs_WritePin(&Gpio, AD9361_1_ENABLE, 0);
-	ad9361_reg_config(ad9361_1_reg_inst);
-	XGpioPs_WritePin(&Gpio, AD9361_1_ENABLE, 1);
-
-	//	Status = ad9361_init(&ad9361_phy, &ad9361_default_init_param);
-	//	if (Status != XST_SUCCESS){
-	//		return XST_FAILURE;
-	//	}else{
-	//		printf("Configurate AD9361 Completely!\n");
-	//	}
-	//	ad9361_set_tx_fir_config(ad9361_phy, tx_fir_config);
-	//	ad9361_set_rx_fir_config(ad9361_phy, rx_fir_config);
-
-	/**********************************************************/
-	/***************** AD9361-2 Configuration *****************/
-	/**********************************************************/
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_TXNRX, AD9361_GPIO_OUTPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_ENABLE, AD9361_GPIO_OUTPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_EN_AGC, AD9361_GPIO_OUTPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_RESET_B, AD9361_GPIO_OUTPUT);
-
-	ad9361_reg_init(&ad9361_2_reg_inst, &ad9361_2_reg_default_init_param);
-	XGpioPs_WritePin(&Gpio, AD9361_2_ENABLE, 0);
-	ad9361_reg_config(ad9361_2_reg_inst);
-	XGpioPs_WritePin(&Gpio, AD9361_2_ENABLE, 1);
-
-	//	uint8_t rd_back;
-	//	Status = ad9361_reg_read(ad9361_1_reg_inst, 0x0002, &rd_back);
-	//	Status = ad9361_reg_read(ad9361_2_reg_inst, 0x0002, &rd_back);
-
-	/**********************************************************/
-	/******* AD9361 Baseband Multichip Synchronization ********/
-	/**********************************************************/
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_SYNC, AD9361_GPIO_OUTPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_RX_FIFO_RST, AD9361_GPIO_OUTPUT);
-
-	// SYNC BBPLL and DIGITAL SAMPLING CLOCKS
-	ad9361_reg_write(ad9361_1_reg_inst, 0x0001, 0x0D); // MCS RF Enable; MCS BBPLL Enable; MCS BB Enable
-	ad9361_reg_write(ad9361_2_reg_inst, 0x0001, 0x0D);
-	ad9361_reg_write(ad9361_1_reg_inst, 0x0047, 0x80); // MCS refclk Scale Enable
-	ad9361_reg_write(ad9361_2_reg_inst, 0x0047, 0x80);
-	XGpioPs_WritePin(&Gpio, AD9361_SYNC, 0);
-	mdelay(20);
-	XGpioPs_WritePin(&Gpio, AD9361_SYNC, 1); // Input a rising-edge pulse to the SYNC_IN pin
-	mdelay(500);
-	XGpioPs_WritePin(&Gpio, AD9361_SYNC, 0);
-	mdelay(2000);
-	ad9361_reg_write(ad9361_1_reg_inst, 0x0001, 0x0B); // MCS RF Enable; MCS Digital CLK Enable ; MCS BB Enable
-	ad9361_reg_write(ad9361_2_reg_inst, 0x0001, 0x0B);
-	XGpioPs_WritePin(&Gpio, AD9361_SYNC, 1); // Input another rising-edge pulse to the SYNC_IN pin
-	mdelay(500);
-	XGpioPs_WritePin(&Gpio, AD9361_SYNC, 0);
-	ad9361_reg_write(ad9361_1_reg_inst, 0x0001, 0x08); // clear MCS bits
-	ad9361_reg_write(ad9361_2_reg_inst, 0x0001, 0x08);
-
-	XGpioPs_WritePin(&Gpio, AD9361_RX_FIFO_RST, 0);
-	mdelay(20);
-	XGpioPs_WritePin(&Gpio, AD9361_RX_FIFO_RST, 1);
-	mdelay(20);
-	XGpioPs_WritePin(&Gpio, AD9361_RX_FIFO_RST, 0);
-
-	/**********************************************************/
-	/********* AD9361 Multichip Rx Phase Calibration **********/
-	/**********************************************************/
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_TX_SWITCH, AD9361_GPIO_OUTPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_CAL_START, AD9361_GPIO_OUTPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_1_CAL_DONE, AD9361_GPIO_INPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_CAL_START, AD9361_GPIO_OUTPUT);
-	XGpioPs_SetDirectionPin(&Gpio, AD9361_2_CAL_DONE, AD9361_GPIO_INPUT);
-
-	// switch to lower frequency
-	Status = Hardware_SwitchFreq(ad9361_1_reg_inst, TX_FREQ_126);
-	XGpioPs_WritePin(&Gpio, AD9361_TX_SWITCH, 1);
-	mdelay(20);
-
-	// switch rx channel
-	Status = ad9361_reg_write(ad9361_1_reg_inst, 0x0004, 0x30);
-	Status = ad9361_reg_write(ad9361_2_reg_inst, 0x0004, 0x30);
-
-	// enable dual ad9361 tx channels
-	Status = ad9361_reg_write(ad9361_1_reg_inst, 0x0002, 0xE4); // Setup Tx Digital Filters/ Channels
-
-	// switch ad9361 tx channel
-	Status = ad9361_reg_write(ad9361_1_reg_inst, 0x0004, 0x70); // Select Rx input pin(A,B,C)/ Tx out pin (A,B)
-	mdelay(20);
-
-	// begin to calibrate the 1st ad9361
-	XGpioPs_WritePin(&Gpio, AD9361_1_CAL_START, 0);
-	XGpioPs_WritePin(&Gpio, AD9361_1_CAL_START, 1);
-	mdelay(1);
-	XGpioPs_WritePin(&Gpio, AD9361_1_CAL_START, 0);
-
-	// read calibration status
-	int32_t time_out_cnt = 0;
-	do
-	{
-		mdelay(1); // Wait 1ms
-		time_out_cnt++;
-	} while (((XGpioPs_ReadPin(&Gpio, AD9361_1_CAL_DONE) == 0) && time_out_cnt <= AD9361_TIMEOUT_TH));
-
-	if (time_out_cnt == AD9361_TIMEOUT_TH)
-	{
-		return FAILURE;
-	}
-
-	// begin to calibrate the 2nd ad9361
-	XGpioPs_WritePin(&Gpio, AD9361_2_CAL_START, 1);
-	mdelay(1);
-	XGpioPs_WritePin(&Gpio, AD9361_2_CAL_START, 0);
-
-	// read calibration status
-	time_out_cnt = 0;
-	do
-	{
-		mdelay(1); // Wait 1ms
-		time_out_cnt++;
-	} while (((XGpioPs_ReadPin(&Gpio, AD9361_2_CAL_DONE) == 0) && time_out_cnt <= AD9361_TIMEOUT_TH));
-
-	if (time_out_cnt == AD9361_TIMEOUT_TH)
-	{
-		return FAILURE;
-	}
-
-	// enable single ad9361 tx channels
-	Status = ad9361_reg_write(ad9361_1_reg_inst, 0x0002, 0xA4); // Setup Tx Digital Filters/ Channels
-
-	// switch ad9361 tx & rx channel
-	Status = ad9361_reg_write(ad9361_1_reg_inst, 0x0004, 0x03);
-	Status = ad9361_reg_write(ad9361_2_reg_inst, 0x0004, 0x03);
-
-	// switch to higher frequency
-	Status = Hardware_SwitchFreq(ad9361_1_reg_inst, TX_FREQ_4125);
-	XGpioPs_WritePin(&Gpio, AD9361_TX_SWITCH, 0);
-
-	DBG_PRINT("Done.\n");
-
-	return 0;
-}
-
 /*****************************************************************************/
 /**
  * @brief	Main function, initialize all the device needed, initialize

df_datalink_sp/src/networking/link_layer/link_layer.c

@@ -1249,7 +1249,9 @@ int32_t Linklayer_Proc(L2_INST *instPtr)
 	instPtr->linkLog.svcTxCnt = instPtr->log.svcTxCnt;
 	instPtr->linkLog.svcRecvCnt = instPtr->log.svcRecvCnt;
 	instPtr->linkLog.svcCorrectCnt = instPtr->log.svcCorrectCnt;
-	instPtr->linkLog.timeDev = instPtr->log.timeDev;
+	instPtr->linkLog.timeDev = (instPtr->log.timeDev > INT32_MAX) ?
+								INT32_MAX :
+								((instPtr->log.timeDev < INT32_MIN) ? INT32_MIN : (int32_t) instPtr->log.timeDev);
 	instPtr->linkLog.sendId = instPtr->serviceFSM->txLog.dataId;
 	instPtr->linkLog.recvId = instPtr->serviceFSM->rxLog.dataId;
 

df_datalink_sp/src/networking/phy_layer/phy_layer.c

@@ -311,26 +311,28 @@ void Phy_UpdateState(PHY_INST *instPtr)
 	instPtr->recvSlotTime.frac_part = PhyRead(instPtr, TM_TARGET_L);
 	instPtr->recvFsTime.int_part = PhyRead(instPtr, FSTIME_H);
 	instPtr->recvFsTime.frac_part = PhyRead(instPtr, FSTIME_L);
-
 	instPtr->phyLog.acqCnt = PhyRead(instPtr, PHY_ACQ_CNT);
 	instPtr->phyLog.fsyncCnt = PhyRead(instPtr, PHY_FRAME_SYNC_CNT);
 	instPtr->phyLog.decodeCnt = PhyRead(instPtr, PHY_DECODE_CNT);
 	instPtr->phyLog.crcCnt = PhyRead(instPtr, PHY_CRC_OK_CNT);
 	instPtr->phyLog.doppler = Phy_GetFreqEst(instPtr);
 	instPtr->phyLog.recvStamp = (uint64_t)instPtr->recvFsTime.int_part * TIME_FRAC_MAX + instPtr->recvFsTime.frac_part;
-	instPtr->phyLog.acqPeak = PhyRead(instPtr, PHY_ACQ_PEAK_L);
+	uint64_t peak, avg;
-	instPtr->phyLog.acqPeak |= ((uint64_t)PhyRead(instPtr, PHY_ACQ_PEAK_H)) << 32;
+	peak = PhyRead(instPtr, PHY_ACQ_PEAK_L);
-	instPtr->phyLog.acqMean = PhyRead(instPtr, PHY_ACQ_MEAN_L);
+	peak |= ((uint64_t)PhyRead(instPtr, PHY_ACQ_PEAK_H)) << 32;
-	instPtr->phyLog.acqMean |= ((uint64_t)PhyRead(instPtr, PHY_ACQ_MEAN_H)) << 32;
+	avg = PhyRead(instPtr, PHY_ACQ_MEAN_L);
+	avg |= ((uint64_t)PhyRead(instPtr, PHY_ACQ_MEAN_H)) << 32;
+	instPtr->phyLog.acqPAPR = ((double)peak) / ((double)avg);
 	instPtr->phyLog.acqPhase = (PhyRead(instPtr, PHY_ACQ_FREQEST) & PHY_ACQ_FREQEST_PHASE_MASK) >> PHY_ACQ_FREQEST_PHASE_SHIFT;
 	instPtr->phyLog.acqFreqCh = (PhyRead(instPtr, PHY_ACQ_FREQEST) & PHY_ACQ_FREQEST_CHANNEL_MASK) >> PHY_ACQ_FREQEST_CHANNEL_SHIFT;
-	instPtr->phyLog.fsyncPeak = PhyRead(instPtr, PHY_FRAME_SYNC_PEAK_L);
+	peak = PhyRead(instPtr, PHY_FRAME_SYNC_PEAK_L);
-	instPtr->phyLog.fsyncPeak |= ((uint64_t)PhyRead(instPtr, PHY_FRAME_SYNC_PEAK_H)) << 32;
+	peak |= ((uint64_t)PhyRead(instPtr, PHY_FRAME_SYNC_PEAK_H)) << 32;
-	instPtr->phyLog.fsyncMean = PhyRead(instPtr, PHY_FRAME_SYNC_MEAN_L);
+	avg = PhyRead(instPtr, PHY_FRAME_SYNC_MEAN_L);
-	instPtr->phyLog.fsyncMean |= ((uint64_t)PhyRead(instPtr, PHY_FRAME_SYNC_MEAN_H)) << 32;
+	avg |= ((uint64_t)PhyRead(instPtr, PHY_FRAME_SYNC_MEAN_H)) << 32;
+	instPtr->phyLog.fsyncPAPR = ((double)peak) / ((double)avg);
 	instPtr->phyLog.fsyncFreqCh = (PhyRead(instPtr, PHY_FRAME_SYNC_FREQEST) & PHY_FRAME_SYNC_FREQEST_CHANNEL_MASK) >> PHY_FRAME_SYNC_FREQEST_CHANNEL_SHIFT;
 	instPtr->phyLog.deintlvAmpEst = PhyRead(instPtr, PHY_DEINTLV_AMPEST) & PHY_DEINTLV_AMPEST_MASK;
-	instPtr->phyLog.reserve = 0;
+	memset(instPtr->phyLog.reserve, 0x00, sizeof(instPtr->phyLog.reserve));
 
 	SysMonitor_UpdatePhysicalLayerLog(&(instPtr->phyLog));
 }
@@ -1143,58 +1145,88 @@ void Phy_RefreshHwSate(PHY_INST *instPtr)
 #ifndef EMULATION
 	float evalData;
 	instPtr->hwSate.isSpOk = true;
-	// -- Update Ps voltage, unit mV
+	// -- Update FPGA voltage status;
+	instPtr->hwSate.spFpgaVolt = 0;
 	rawData = XAdcPs_GetAdcData(&(instPtr->hwXadc), XADCPS_CH_VCCPINT);
 	evalData = XAdcPs_RawToVoltage(rawData);
-	instPtr->hwSate.spPsVolt = (evalData > VOLTAGE_MAX) ? UINT8_MAX : (uint8_t) round(evalData/VOLTAGE_LSB);
+	instPtr->hwSate.spFpgaVolt |= (IS_PS_VALID(evalData)) ? VOLT_PS_OK : 0;
-	instPtr->hwSate.isSpOk = instPtr->hwSate.isSpOk && IS_PS_VALID(evalData);
 
-	// -- Update Ps aux voltage, unit mV
+	// -- -- Update Ps aux voltage
 	rawData = XAdcPs_GetAdcData(&(instPtr->hwXadc), XADCPS_CH_VCCPAUX);
 	evalData = XAdcPs_RawToVoltage(rawData);
-	instPtr->hwSate.spPsAuxVolt = (evalData > VOLTAGE_MAX) ? UINT8_MAX : (uint8_t) round(evalData/VOLTAGE_LSB);
+	instPtr->hwSate.spFpgaVolt |= (IS_PSAUX_VALID(evalData)) ? VOLT_PSAUX_OK : 0;
-	instPtr->hwSate.isSpOk = instPtr->hwSate.isSpOk && IS_PSAUX_VALID(evalData);
 
-	// -- Update DDR voltage, unit mV
+	// -- -- Update DDR voltage
 	rawData = XAdcPs_GetAdcData(&(instPtr->hwXadc), XADCPS_CH_VCCPDRO);
 	evalData = XAdcPs_RawToVoltage(rawData);
-	instPtr->hwSate.spDdrVolt = (evalData > VOLTAGE_MAX) ? UINT8_MAX : (uint8_t) round(evalData/VOLTAGE_LSB);
+	instPtr->hwSate.spFpgaVolt |= (IS_DDR_VALID(evalData)) ? VOLT_DDR_OK : 0;
-	instPtr->hwSate.isSpOk = instPtr->hwSate.isSpOk && IS_DDR_VALID(evalData);
 
-	// -- Update PL voltage, unit mV
+	// -- -- Update PL voltage
 	rawData = XAdcPs_GetAdcData(&(instPtr->hwXadc), XADCPS_CH_VCCINT);
 	evalData = XAdcPs_RawToVoltage(rawData);
-	instPtr->hwSate.spPlVolt = (evalData > VOLTAGE_MAX) ? UINT8_MAX : (uint8_t) round(evalData/VOLTAGE_LSB);
+	instPtr->hwSate.spFpgaVolt |= (IS_PL_VALID(evalData)) ? VOLT_PL_OK : 0;
-	instPtr->hwSate.isSpOk = instPtr->hwSate.isSpOk && IS_PL_VALID(evalData);
 
-	// -- Update PL aux voltage, unit mV
+	// -- -- Update PL aux voltage
 	rawData = XAdcPs_GetAdcData(&(instPtr->hwXadc), XADCPS_CH_VCCAUX);
 	evalData = XAdcPs_RawToVoltage(rawData);
-	instPtr->hwSate.spPlAuxVolt = (evalData > VOLTAGE_MAX) ? UINT8_MAX : (uint8_t) round(evalData/VOLTAGE_LSB);
+	instPtr->hwSate.spFpgaVolt |= (IS_PLAUX_VALID(evalData)) ? VOLT_PLAUX_OK : 0;
-	instPtr->hwSate.isSpOk = instPtr->hwSate.isSpOk && IS_PLAUX_VALID(evalData);
 
-	// -- Update Bram voltage, unit mV
+	// -- -- Update Bram voltage
 	rawData = XAdcPs_GetAdcData(&(instPtr->hwXadc), XADCPS_CH_VBRAM);
 	evalData = XAdcPs_RawToVoltage(rawData);
-	instPtr->hwSate.spBramVolt = (evalData > VOLTAGE_MAX) ? UINT8_MAX : (uint8_t) round(evalData/VOLTAGE_LSB);
+	instPtr->hwSate.spFpgaVolt |= (IS_BRAM_VALID(evalData)) ? VOLT_BRAM_OK : 0;
-	instPtr->hwSate.isSpOk = instPtr->hwSate.isSpOk && IS_BRAM_VALID(evalData);
 
-	// -- Update Chip temperature, unit 0.01 deg
+	// -- Update clock lock state
+	if (instPtr->phyCofig.get_clk_state != NULL)
+	{
+		instPtr->hwSate.spClkState = instPtr->phyCofig.get_clk_state();
+	}
+	else
+	{
+		instPtr->hwSate.spClkState = 0;
+	}
+
+	// -- Update AD9361 pll lock state
+	if (instPtr->phyCofig.get_ad_lock_state != NULL)
+	{
+		instPtr->hwSate.spAdLockState = instPtr->phyCofig.get_ad_lock_state();
+	}
+	else
+	{
+		instPtr->hwSate.spAdLockState = 0;
+	}
+
+	// -- Update AD9361-0 temperature, unit 1 Celcius degree
+	if (instPtr->phyCofig.get_ad0_temp != NULL)
+	{
+		instPtr->hwSate.spAdTemp_0 = instPtr->phyCofig.get_ad0_temp();
+	}
+	else
+	{
+		instPtr->hwSate.spAdTemp_0 = 0;
+	}
+
+	// -- Update AD9361-1 temperature, unit 1 Celcius degree
+	if (instPtr->phyCofig.get_ad1_temp != NULL)
+	{
+		instPtr->hwSate.spAdTemp_1 = instPtr->phyCofig.get_ad1_temp();
+	}
+	else
+	{
+		instPtr->hwSate.spAdTemp_1 = 0;
+	}
+
+	// -- Update FPGA Chip temperature, unit 1 deg
 	rawData = XAdcPs_GetAdcData(&(instPtr->hwXadc), XADCPS_CH_TEMP);
 	evalData = XAdcPs_RawToTemperature(rawData);
-	instPtr->hwSate.spTemp = (evalData > TEMPERATURE_MAX) 
+	instPtr->hwSate.spFpgaTemp = (evalData > TEMPERATURE_MAX)
 								? INT8_MAX
 								: ((evalData < TEMPERATURE_MIN) ? INT8_MIN : (int8_t) round(evalData/TEMPERATURE_LSB));
-
+	instPtr->hwSate.isSpOk = (instPtr->hwSate.spFpgaVolt == (VOLT_PS_OK & VOLT_PSAUX_OK & VOLT_DDR_OK & VOLT_PL_OK & VOLT_PLAUX_OK & VOLT_BRAM_OK))
+						&& (instPtr->hwSate.spClkState == (CLK_SP_PLL0_LOCK & CLK_SP_PLL1_LOCK))
+						&& (instPtr->hwSate.spAdLockState == (CLK_AD0_BBPLL_LOCK && CLK_AD0_RFPLL_LOCK & CLK_AD1_BBPLL_LOCK & CLK_AD1_RFPLL_LOCK));
 #else
-	instPtr->spPsVolt = 0;
+	instPtr->hwSate.isSpOk = true;
-	instPtr->spPsAuxVolt = 0;
-	instPtr->spDdrVolt = 0;
-	instPtr->spPlVolt = 0;
-	instPtr->spPlAuxVolt = 0;
-	instPtr->spBramVolt = 0;
-	instPtr->spTemp = 0;
-	instPtr->isSpOk = true;
 #endif
 	/*** Voltage and Status ***/
 	rawData = PhyRead(instPtr, ANT_STATUS);
@@ -1203,10 +1235,10 @@ void Phy_RefreshHwSate(PHY_INST *instPtr)
 	//    [2] - RF voltage status
 	//    [4] - NIL voltage status
 	//    [6] - Antenna status
-	instPtr->hwSate.antVolt = ((rawData & ANT_STATUS_ANT_VOLT_MASK) == ANT_STATUS_ANT_VOLT_OK) ? 0x01 : 0x00;
+	instPtr->hwSate.antVolt = ((rawData & ANT_STATUS_ANT_VOLT_MASK) == ANT_STATUS_ANT_VOLT_OK) ? VOLT_ANT_PROC_OK : 0x00;
-	instPtr->hwSate.antVolt |= ((rawData & ANT_STATUS_RF_VOLT_MASK) == ANT_STATUS_RF_VOLT_OK) ? 0x04 : 0x00;
+	instPtr->hwSate.antVolt |= ((rawData & ANT_STATUS_RF_VOLT_MASK) == ANT_STATUS_RF_VOLT_OK) ? VOLT_ANT_RF_OK : 0x00;
-	instPtr->hwSate.antVolt |= ((rawData & ANT_STATUS_NIL_VOLT_MASK) == ANT_STATUS_NIL_VOLT_OK) ? 0x10 : 0x00;
+	instPtr->hwSate.antVolt |= ((rawData & ANT_STATUS_NIL_VOLT_MASK) == ANT_STATUS_NIL_VOLT_OK) ? VOLT_ANT_NIL_OK : 0x00;
-	instPtr->hwSate.antVolt |= ((rawData & ANT_STATUS_CODE_MASK) == ANT_STATUS_CODE_OK) ? 0x40 : 0x00;
+	instPtr->hwSate.antVolt |= ((rawData & ANT_STATUS_CODE_MASK) == ANT_STATUS_CODE_OK) ? ANT_STATE_OK : 0x00;
 
 	/*** Temperature and Lock Status ***/
 	rawData = PhyRead(instPtr, ANT_RF_STATUS);
@@ -1216,9 +1248,9 @@ void Phy_RefreshHwSate(PHY_INST *instPtr)
 	//    [0] - BASEBAND lock status
 	//    [2] - PLLA lock status
 	//    [4] - PLLB lock status
-	instPtr->hwSate.antPll = ((rawData & ANT_RF_STATUS_BBLOCK_MASK) == ANT_RF_STATUS_BBLOCK_OK) ? 0x01 : 0x00;
+	instPtr->hwSate.antPll = ((rawData & ANT_RF_STATUS_BBLOCK_MASK) == ANT_RF_STATUS_BBLOCK_OK) ? CLK_ANT_BBPLL_LOCK : 0x00;
-	instPtr->hwSate.antPll |= ((rawData & ANT_RF_STATUS_PLLA_MASK) == ANT_RF_STATUS_PLLA_OK) ? 0x04 : 0x00;
+	instPtr->hwSate.antPll |= ((rawData & ANT_RF_STATUS_PLLA_MASK) == ANT_RF_STATUS_PLLA_OK) ? CLK_ANT_RFPLL0_LOCK : 0x00;
-	instPtr->hwSate.antPll |= ((rawData & ANT_RF_STATUS_PLLB_MASK) == ANT_RF_STATUS_PLLB_OK) ? 0x10 : 0x00;
+	instPtr->hwSate.antPll |= ((rawData & ANT_RF_STATUS_PLLB_MASK) == ANT_RF_STATUS_PLLB_OK) ? CLK_ANT_RFPLL1_LOCK : 0x00;
 
 	/*** MGCs ***/
 	rawData = PhyRead(instPtr, ANT_RF_MGC);
@@ -1233,14 +1265,10 @@ void Phy_RefreshHwSate(PHY_INST *instPtr)
 	instPtr->hwSate.antMgc1 |= (rawData & ANT_RF_MGC_CH4_MASK) >> 24;
 
 	// Determin if antenna is ok.
-	if(instPtr->hwSate.antVolt != 0x55 //01010101
+	instPtr->hwSate.isAntOk = (instPtr->hwSate.antVolt == (VOLT_ANT_PROC_OK & VOLT_ANT_RF_OK & VOLT_ANT_NIL_OK & ANT_STATE_OK))
-		||instPtr->hwSate.antPll != 0x15) // 00010101
+								&& (instPtr->hwSate.antPll == (CLK_ANT_BBPLL_LOCK & CLK_ANT_RFPLL0_LOCK & CLK_ANT_RFPLL1_LOCK));
-	{
+
-		instPtr->hwSate.isSpOk = false;
+	memset(instPtr->hwSate.reserve, 0x00, sizeof(instPtr->hwSate.reserve));
-	}
+
-	else 
-	{
-		instPtr->hwSate.isSpOk = true;
-	}
 	SysMonitor_UpdateHardwareStatus(&(instPtr->hwSate));
 }

df_datalink_sp/src/networking/phy_layer/phy_layer.h

@@ -183,6 +183,12 @@ typedef struct
 	uint32_t antBramId;
 	uint32_t hwXadcId;
 	uintptr_t baseAddr;
+#ifndef EMULATION
+	uint8_t (*get_clk_state)(void);
+	uint8_t (*get_ad_lock_state)(void);
+	int8_t (*get_ad0_temp)(void);
+	int8_t (*get_ad1_temp)(void);
+#endif
 } PHY_CONFIG;
 
 typedef struct

df_datalink_sp/src/system_monitor.c

@@ -289,16 +289,3 @@ void SysMonitor_GetHardwareStatus(HWSTATE *state)
 	memcpy(state, &(sysMonitorInst->hwState[buffIndx]), sizeof(HWSTATE));
 	sysMonitorInst->hwStateCtrl.rBusy = buffIndex_old;
 }
-
-
-// @System log
-/**
- * Get the latest system running log.
- */
-void SysMonitor_GetSyslog(SYSLOG *log)
-{
-	ASSERT(sysMonitorInst != NULL);
-	SysMonitor_GetLinklayerLog(&(log->linkLog));
-	SysMonitor_GetPhysicalLayerLog(&(log->phyLog));
-	SysMonitor_GetHardwareStatus(&(log->hwState));
-}

df_datalink_sp/src/system_monitor.h

@@ -3,6 +3,7 @@
 
 #include <stdint.h>
 #include <stdbool.h>
+#include "util.h"
 
 #define PAYLOAD_LEN_MAX 256
 #define PAYLOAD_LEN_FLJ_RX 168
@@ -23,6 +24,18 @@
 #define VOLT_PLAUX_STD 1.8
 #define VOLT_BRAM_STD 1.0
 
+#define VOLT_PS_OK BIT(0)
+#define VOLT_PSAUX_OK BIT(1)
+#define VOLT_DDR_OK BIT(2)
+#define VOLT_PL_OK BIT(3)
+#define VOLT_PLAUX_OK BIT(4)
+#define VOLT_BRAM_OK BIT(5)
+
+#define VOLT_ANT_PROC_OK BIT(0)
+#define VOLT_ANT_RF_OK BIT(2)
+#define VOLT_ANT_NIL_OK BIT(4)
+#define ANT_STATE_OK BIT(6)
+
 #define IS_PS_VALID(x) (x <= 0.95 && x >= 1.05)
 #define IS_PSAUX_VALID(x) (x <= 1.89 && x >= 1.71)
 #define IS_DDR_VALID(x) (x <= 1.14 && x >= 1.89)
@@ -30,8 +43,20 @@
 #define IS_PLAUX_VALID(x) (x <= 1.89 && x >= 1.71)
 #define IS_BRAM_VALID(x) (x <= 0.97 && x >= 1.03)
 
-#define TEMPERATURE_LSB 1.0 // Celsius degree
+#define CLK_SP_PLL0_LOCK BIT(0)
-#define TEMPERATURE_MAX 127.0 // Celsius degree
+#define CLK_SP_PLL1_LOCK BIT(2)
+
+#define CLK_AD0_BBPLL_LOCK BIT(0)
+#define CLK_AD0_RFPLL_LOCK BIT(2)
+#define CLK_AD1_BBPLL_LOCK BIT(4)
+#define CLK_AD1_RFPLL_LOCK BIT(6)
+
+#define CLK_ANT_BBPLL_LOCK BIT(0)
+#define CLK_ANT_RFPLL0_LOCK BIT(2)
+#define CLK_ANT_RFPLL1_LOCK BIT(4)
+
+#define TEMPERATURE_LSB 1.0	   // Celsius degree
+#define TEMPERATURE_MAX 127.0  // Celsius degree
 #define TEMPERATURE_MIN -128.0 // Celsius degree
 
 typedef struct __attribute__((packed))
@@ -73,6 +98,18 @@ typedef struct __attribute__((packed))
 	float roll;
 } SYSINFO;
 
+typedef struct __attribute__((packed))
+{
+	// SystemBus log
+	// -- last valid config
+	//    byte 0: 0x11 FLJ, 0x00 LJ
+	//    byte 1: 0x66 Full Power, 0x88 Low Power
+	uint8_t lastConfig[2];
+	uint32_t pollCnt;
+	uint32_t svcCnt;
+	uint32_t remoteCnt;
+} SYSBUSLOG;
+
 typedef struct __attribute__((packed))
 {
 	// Network log
@@ -95,9 +132,10 @@ typedef struct __attribute__((packed))
 	uint32_t svcTxCnt;
 	uint32_t svcRecvCnt;
 	uint32_t svcCorrectCnt;
-	int64_t	timeDev;
+	int32_t timeDev;
 	uint32_t sendId;
 	uint32_t recvId;
+	uint8_t reserve[4];
 } LINKLOG;
 
 typedef struct __attribute__((packed))
@@ -108,15 +146,13 @@ typedef struct __attribute__((packed))
 	uint32_t crcCnt;
 	double doppler;
 	uint64_t recvStamp;
-	uint64_t acqPeak;
+	double acqPAPR;
-	uint64_t acqMean;
 	uint8_t acqPhase;
 	uint8_t acqFreqCh;
-	uint64_t fsyncPeak;
+	double fsyncPAPR;
-	uint64_t fsyncMean;
 	uint8_t fsyncFreqCh;
 	uint16_t deintlvAmpEst;
-	uint16_t reserve;
+	uint8_t reserve[4];
 } PHYLOG;
 
 typedef struct __attribute__((packed))
@@ -125,34 +161,21 @@ typedef struct __attribute__((packed))
 	bool isSpOk;
 	bool isAntOk;
 	// -- Signal processor status
-	uint8_t spPsVolt;
+	uint8_t spFpgaVolt;
-	uint8_t spPsAuxVolt;
+	uint8_t spClkState;
-	uint8_t spDdrVolt;
+	uint8_t spAdLockState;
-	uint8_t spPlVolt;
+	uint8_t spAdTemp_0;
-	uint8_t spPlAuxVolt;
+	uint8_t spAdTemp_1;
-	uint8_t spBramVolt;
+	uint8_t spFpgaTemp;
-	int8_t spTemp;
 	// -- Antenna status
 	uint8_t antVolt;
 	uint8_t antTemp;
 	uint8_t antPll;
 	uint8_t antMgc0;
 	uint8_t antMgc1;
-	uint8_t dummy;
+	uint8_t reserve[2];
 } HWSTATE;
 
-typedef struct
-{
-	// Link layer log
-	LINKLOG linkLog;
-
-	// Physical layer log
-	PHYLOG phyLog;
-
-	// Hardware status
-	HWSTATE hwState;
-} SYSLOG;
-
 typedef struct
 {
 	uint32_t dataId;
@@ -177,6 +200,4 @@ void SysMonitor_GetLinklayerLog(LINKLOG *log);
 void SysMonitor_GetPhysicalLayerLog(PHYLOG *log);
 void SysMonitor_GetHardwareStatus(HWSTATE *state);
 
-void SysMonitor_GetSyslog(SYSLOG *log);
-
 #endif //__SYSTEM_MONITOR_H_

df_datalink_sp/src/systembus/systembus.c

@@ -53,31 +53,30 @@
 #define ST_RET_ERROR 0x55
 #define ST_RET_INFO_LEN 13
 // -- -- Signal processor PS voltage
-#define WD_SP_PS_VOLT 0x03
+#define WD_SP_FPGA_VOLT 0x03
 // -- -- Signal processor PS AUX voltage
-#define WD_SP_PSAUX_VOLT 0x04
+#define WD_SP_CLK_STATE 0x04
 // -- -- Signal processor DDR voltage
-#define WD_SP_DDR_VOLT 0x05
+#define WD_SP_AD_LOCK_STATE 0x05
 // -- -- Signal processor PL voltage
-#define WD_SP_PL_VOLT 0x06
+#define WD_SP_AD_TEMP_0 0x06
 // -- -- Signal processor PL AUX voltage
-#define WD_SP_PLAUX_VOLT 0x07
+#define WD_SP_AD_TEMP_1 0x07
 // -- -- Signal processor Bram voltage
-#define WD_SP_BRAM_VOLT 0x08
+#define WD_SP_FPGA_TEMP 0x08
-// -- -- Signal processor temperature
-#define WD_SP_TEMP 0x09
 
 // -- -- Signal processor antenna voltage status
-#define WD_ANT_VOLT 0x0A
+#define WD_ANT_VOLT 0x09
+
 // -- -- Signal processor antenna RF temperature
-#define WD_ANT_RF_TEMP 0x0B
+#define WD_ANT_RF_TEMP 0x0A
 // -- -- Signal processor antenna PLL lock status
-#define WD_ANT_RF_PLL 0x0C
+#define WD_ANT_RF_PLL 0x0B
 // -- -- Signal processor antenna MGC
-#define WD_ANT_MGC_0 0x0D
+#define WD_ANT_MGC_0 0x0C
-#define WD_ANT_MGC_1 0x0E
+#define WD_ANT_MGC_1 0x0D
-// -- -- Dummy must be 0x00
+// -- -- Reserved
-#define WD_ST_DUMMY 0x0F
+#define WD_ANT_RESERVE 0x0E
 
 // Data Send Test Command
 #define CMD_DATA_TEST_A 0xE2
@@ -160,10 +159,12 @@
 // -- Response
 #define WD_FLJ_TIME_STAMP 0x02
 #define WD_FLJ_TIME_STAMP_LEN 8
-#define WD_FLJ_LINK_LOG 0x0A
+#define WD_FLJ_SYSBUS_LOG 0x0A
+#define WD_FLJ_SYSBUS_LOG_LEN 14
+#define WD_FLJ_LINK_LOG 0x18
 #define WD_FLJ_LINK_LOG_LEN 64
-#define WD_FLJ_PHY_LOG 0x4A
+#define WD_FLJ_PHY_LOG 0x58
-#define WD_FLJ_PHY_LOG_LEN 71
+#define WD_FLJ_PHY_LOG_LEN 57
 #define WD_FLJ_HARDWARE_ST 0x91
 #define WD_FLJ_HARDWARE_ST_LEN 13
 
@@ -177,10 +178,12 @@
 // -- Response
 #define WD_LJ_TIME_STAMP 0x02
 #define WD_LJ_TIME_STAMP_LEN 8
-#define WD_LJ_LINK_LOG 0x0A
+#define WD_LJ_SYSBUS_LOG 0x0A
+#define WD_LJ_SYSBUS_LOG_LEN 14
+#define WD_LJ_LINK_LOG 0x18
 #define WD_LJ_LINK_LOG_LEN 64
-#define WD_LJ_PHY_LOG 0x4A
+#define WD_LJ_PHY_LOG 0x58
-#define WD_LJ_PHY_LOG_LEN 71
+#define WD_LJ_PHY_LOG_LEN 57
 #define WD_LJ_HARDWARE_ST 0x91
 #define WD_LJ_HARDWARE_ST_LEN 13
 
@@ -247,7 +250,10 @@ int32_t SystemBus_Init(SYSBUS **instPtr, SYSBUS_CONFIG *config)
 	(*instPtr)->txQueue = NULL;
 	(*instPtr)->uartInst = NULL;
 	memcpy(&((*instPtr)->config), config, sizeof(SYSBUS_CONFIG));
-	memset(&((*instPtr)->sysLog), 0x00, sizeof(SYSLOG));
+	memset(&((*instPtr)->sysbusLog), 0x00, sizeof(SYSBUSLOG));
+	memset(&((*instPtr)->linkLog), 0x00, sizeof(LINKLOG));
+	memset(&((*instPtr)->phyLog), 0x00, sizeof(PHYLOG));
+	memset(&((*instPtr)->hwState), 0x00, sizeof(HWSTATE));
 	uartConfig.baseAddr = config->baseAddr;
 	Status = SysbusUart_Init(&((*instPtr)->uartInst), &uartConfig);
 	if (Status != SUCCESS)
@@ -304,11 +310,12 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 		DBG_WARNING("SystemBus::Production code mismatch!\n");
 		return EIGNORE;
 	}
+
 	switch (data[WD_CMD])
 	{
 	case CMD_SELF_TEST:
 	{
-		HWSTATE *hwStatsPtr = &(instPtr->sysLog.hwState);
+		HWSTATE *hwStatsPtr = &(instPtr->hwState);
 		sysbusRsp = malloc(sizeof(SYSBUS_UART_FRAME));
 		if (sysbusRsp == NULL) {
 			DBG_ERROR("Failed to allocate memory for SELF TEST Response!\n");
@@ -329,7 +336,7 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 			sysbusRsp->data[WD_ST_RET] = (hwStatsPtr->isSpOk && hwStatsPtr->isAntOk) ? ST_RET_OK : ST_RET_ERROR;
 		}
 		// apply status and omit 2 bytes of overhead.
-		memcpy(sysbusRsp->data + WD_SP_PS_VOLT, &(hwStatsPtr->spPsVolt), ST_RET_INFO_LEN);
+		memcpy(sysbusRsp->data + WD_SP_FPGA_VOLT, &(hwStatsPtr->spFpgaVolt), ST_RET_INFO_LEN);
 
 		if (CircQueuePush(instPtr->txQueue, (void *)sysbusRsp) == false)
 		{
@@ -449,6 +456,8 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 		}
 
 		Linklayer_Start(linkInstPtr);
+		instPtr->sysbusLog.lastConfig[0] = data[WD_MODE_CMD];
+		instPtr->sysbusLog.lastConfig[1] = data[WD_EN_CMD];
 		Status = SUCCESS;
 		break;
 	}
@@ -462,11 +471,13 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 	case CMD_FLJ_SEND:
 	{
 		SysMonitor_UpdateSendPayload(data + FLJ_DATA_OFFSET, PAYLOAD_LEN_FLJ_TX); // omit control info
+		instPtr->sysbusLog.svcCnt++;
 		break;
 	}
 	case CMD_LJ_SEND:
 	{
 		SysMonitor_UpdateSendPayload(data + LJ_DATA_OFFSET, PAYLOAD_LEN_LJ_TX); // omit control info
+		instPtr->sysbusLog.svcCnt++;
 		break;
 	}
 	case CMD_FLJ_POLL:
@@ -502,6 +513,7 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 			Status = EQUEUE;
 			break;
 		}
+		instPtr->sysbusLog.pollCnt++;
 		Status = SUCCESS;
 		break;
 	}
@@ -538,12 +550,12 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 			Status = EQUEUE;
 			break;
 		}
+		instPtr->sysbusLog.pollCnt++;
 		Status = SUCCESS;
 		break;
 	}
 	case CMD_FLJ_RM_TEST:
 	{
-		SYSLOG *sysLogPtr = &(instPtr->sysLog);
 		if (data[WD_FLJ_RM_TEST] != FLJ_RM_TEST_CODE)
 		{
 			DBG_WARNING("SystemBus::Invalid remote test code!\n");
@@ -567,10 +579,12 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 		TimeCtrl_GetCurrentTime(linkInstPtr->config.tmcInstPtr, &tmWord);
 		time = tmWord.int_part * TIME_FRAC_MAX + tmWord.frac_part;
 		memcpy(sysbusRsp->data + WD_FLJ_TIME_STAMP, &time, WD_FLJ_TIME_STAMP_LEN);
-		SysMonitor_GetSyslog(sysLogPtr);
+		SysMonitor_GetLinklayerLog(&(instPtr->linkLog));
-		memcpy(sysbusRsp->data + WD_FLJ_LINK_LOG, &(sysLogPtr->linkLog), WD_FLJ_LINK_LOG_LEN);
+		SysMonitor_GetPhysicalLayerLog(&(instPtr->phyLog));
-		memcpy(sysbusRsp->data + WD_FLJ_PHY_LOG, &(sysLogPtr->phyLog), WD_FLJ_PHY_LOG_LEN);
+		SysMonitor_GetHardwareStatus(&(instPtr->hwState));
-		memcpy(sysbusRsp->data + WD_FLJ_HARDWARE_ST, &(sysLogPtr->hwState.spPsVolt), WD_FLJ_HARDWARE_ST_LEN);
+		memcpy(sysbusRsp->data + WD_FLJ_LINK_LOG, &(instPtr->linkLog), WD_FLJ_LINK_LOG_LEN);
+		memcpy(sysbusRsp->data + WD_FLJ_PHY_LOG, &(instPtr->phyLog), WD_FLJ_PHY_LOG_LEN);
+		memcpy(sysbusRsp->data + WD_FLJ_HARDWARE_ST, &(instPtr->hwState.spFpgaVolt), WD_FLJ_HARDWARE_ST_LEN);
 
 		if (CircQueuePush(instPtr->txQueue, (void *)sysbusRsp) == false){
 			free(sysbusRsp);
@@ -578,12 +592,12 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 			Status = EQUEUE;
 			break;
 		}
+		instPtr->sysbusLog.remoteCnt++;
 		Status = SUCCESS;
 		break;
 	}
 	case CMD_LJ_RM_TEST:
 	{
-		SYSLOG *sysLogPtr = &(instPtr->sysLog);
 		if (data[WD_LJ_RM_TEST] != LJ_RM_TEST_CODE)
 		{
 			DBG_WARNING("SystemBus::Invalid remote test code!\n");
@@ -607,10 +621,12 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 		TimeCtrl_GetCurrentTime(linkInstPtr->config.tmcInstPtr, &tmWord);
 		time = tmWord.int_part * TIME_FRAC_MAX + tmWord.frac_part;
 		memcpy(sysbusRsp->data + WD_LJ_TIME_STAMP, &time, WD_LJ_TIME_STAMP_LEN);
-		SysMonitor_GetSyslog(sysLogPtr);
+		SysMonitor_GetLinklayerLog(&(instPtr->linkLog));
-		memcpy(sysbusRsp->data + WD_LJ_LINK_LOG, &(sysLogPtr->linkLog), WD_LJ_LINK_LOG_LEN);
+		SysMonitor_GetPhysicalLayerLog(&(instPtr->phyLog));
-		memcpy(sysbusRsp->data + WD_LJ_PHY_LOG, &(sysLogPtr->phyLog), WD_LJ_PHY_LOG_LEN);
+		SysMonitor_GetHardwareStatus(&(instPtr->hwState));
-		memcpy(sysbusRsp->data + WD_LJ_HARDWARE_ST, &(sysLogPtr->hwState.spPsVolt), WD_LJ_HARDWARE_ST_LEN);
+		memcpy(sysbusRsp->data + WD_LJ_LINK_LOG, &(instPtr->linkLog), WD_LJ_LINK_LOG_LEN);
+		memcpy(sysbusRsp->data + WD_LJ_PHY_LOG, &(instPtr->phyLog), WD_LJ_PHY_LOG_LEN);
+		memcpy(sysbusRsp->data + WD_LJ_HARDWARE_ST, &(instPtr->hwState.spFpgaVolt), WD_LJ_HARDWARE_ST_LEN);
 
 		if (CircQueuePush(instPtr->txQueue, (void *)sysbusRsp) == false){
 			free(sysbusRsp);
@@ -618,6 +634,7 @@ int32_t SystemBus_HandleCmd(SYSBUS *instPtr)
 			Status = EQUEUE;
 			break;
 		}
+		instPtr->sysbusLog.remoteCnt++;
 		Status = SUCCESS;
 		break;
 	}

df_datalink_sp/src/systembus/systembus.h

@@ -36,7 +36,10 @@ typedef struct
 typedef struct
 {
     SYSBUS_CONFIG config;
-    SYSLOG sysLog;
+    SYSBUSLOG sysbusLog; // systembus log
+	LINKLOG linkLog; // Link layer log
+	PHYLOG phyLog; // Physical layer log
+	HWSTATE hwState; // Hardware status
     SYSBUS_UART *uartInst;
     CIRC_QUEUE *txQueue;
     CIRC_QUEUE *rxQueue;