feat: 根据HJSL硬件修改相关profile

2025-05-13 15:45:59 +08:00
parent a24d8e8d35
commit 0c5fc1ec2b
14 changed files with 1360 additions and 956 deletions
@@ -0,0 +1,134 @@
+#include "dev_profile.h"
+#include "../config/app_config.h"
+#include "../drivers/platform/xilinx_gpio.h"
+#include "../drivers/axi_core/spi_engine/spi_engine.h"
+#include "../drivers/frequency/ad9528/ad9528.h"
+
+static struct spi_engine_init_param spi_engine_param = {
+	.ref_clk_hz = AD9528_SPI_ENGINE_REF_CLK,
+	.type = SPI_ENGINE,
+	.spi_engine_baseaddr = AD9528_SPI_ENGINE_BASEADDR,
+	.cs_delay = AD9528_SPI_ENGINE_CS_DELAY,
+	.data_width = AD9528_SPI_ENGINE_DATA_WIDTH
+};
+
+static struct xil_gpio_init_param xil_gpio_param = {
+	.type = GPIO_PS,
+	.device_id = AD9528_GPIO_DEVICE_ID
+};
+
+static struct spi_init_param ad9528_spi_init = {
+	.device_id = AD9528_SPI_DEVICE_ID,
+    .max_speed_hz = AD9528_SPI_ENGINE_MAX_SPEED,
+	.mode = SPI_MODE_0,
+	.chip_select = AD9528_SPI_CS,
+	.platform_ops = &spi_eng_platform_ops,
+	.extra = &spi_engine_param
+};
+
+static struct gpio_init_param ad9528_gpio_resetb_init = {
+	.number = AD9528_RESETB,
+	.platform_ops = &xil_gpio_ops,
+	.extra = &xil_gpio_param
+};
+
+static struct gpio_init_param ad9528_gpio_sysref_req_init = {
+	.number = AD9528_SYSREF_REQ,
+	.platform_ops = &xil_gpio_ops,
+	.extra = &xil_gpio_param
+};
+
+static ad9528pll1Settings_t clockPll1Settings = {
+    .refA_Frequency_Hz  = 50000000,
+    .refA_Divider       = 1,
+    .refA_bufferCtrl    = SINGLE_ENDED,
+    .refB_Frequency_Hz  = 0,
+    .refB_Divider       = 1,
+    .refB_bufferCtrl    = DISABLED,
+    .vcxo_Frequency_Hz  = 50000000,
+    .vcxoBufferCtrl     = SINGLE_ENDED,
+    .nDivider           = 1
+};
+
+static ad9528pll2Settings_t clockPll2Settings = {
+    .rfDivider = 4,
+    .n2Divider = 20,
+    .totalNdiv = 80
+};
+
+/*******************************************************************
+ * Output Distribution Settings
+ * 9369CE02A uses the following clock outputs
+ * OUT 1: FPGA REFCLK
+ * OUT 3: FPGA SYSREF
+ * OUT 12: DUT SYSREF
+ * OUT 13: DUT REFCLK
+ *******************************************************************
+ */
+static ad9528outputSettings_t clockOutputSettings = {
+    .outPowerDown = 0xE001,
+    .outSource = {
+            AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV,
+			AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV,
+			AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV, AD9528_CHANNEL_DIV
+    },
+    .outBufferCtrl = {
+    		0,0,0,0,0,
+    		0,0,0,0,0,
+			0,0,0,0
+    },
+    .outAnalogDelay = {
+    		0,0,0,0,0,
+    		0,0,0,0,0,
+			0,0,0,0
+    },
+    .outDigitalDelay = {
+    		0,0,0,0,0,
+    		0,0,0,0,0,
+			0,0,0,0
+    },
+    .outChannelDiv = {
+    		5,25,25,5,5,
+			5,5,8,5,5,
+			5,5,10,5
+    },
+    .outFrequency_Hz    = {
+            200e6, 40e6, 40e6, 200e6, 200e6,
+			200e6, 200e6, 125e6, 200e6, 200e6,
+			200e6, 200e6, 100e6, 200e6
+    }
+};
+
+static ad9528sysrefSettings_t clockSysrefSettings = {
+    .sysrefRequestMethod    = PIN,
+    .sysrefSource           = INTERNAL,
+    .sysrefPinEdgeMode      = LEVEL_ACTIVE_HIGH,
+    .sysrefPinBufferMode    = DISABLED,
+    .sysrefPatternMode      = CONTINUOUS,
+    .sysrefNshotMode        = FOUR_PULSES,
+    .sysrefDivide           = 256
+};
+
+static ad9528spiSettings_t clockSpiSettings = {
+    .chipSelectIndex        = AD9528_SPI_CS, //chip select Index, not used
+    .writeBitPolarity       = 0, //Write bit polarity
+    .longInstructionWord    = 1, //16bit instruction word
+    .MSBFirst               = 1, //MSB first
+    .CPHA                   = 0, //Clock phase
+    .CPOL                   = 0, //Clock polarity
+    .enSpiStreaming         = 0, //uint8_t enSpiStreaming;
+    .autoIncAddrUp          = 1, //uint8_t autoIncAddrUp;
+    .fourWireMode           = 1  //uint8_t fourWireMode;
+};
+
+ad9528Init_t ad9528_default_init_param = {
+	/* SPI */
+	.spi_init = &ad9528_spi_init,
+	.gpio_init_resetb = &ad9528_gpio_resetb_init,
+	.gpio_init_sysref_req = &ad9528_gpio_sysref_req_init,
+    .spiSettings = &clockSpiSettings,
+    .pll1Settings = &clockPll1Settings,
+    .pll2Settings = &clockPll2Settings,
+    .outputSettings = &clockOutputSettings,
+    .sysrefSettings = &clockSysrefSettings
+};