finish test of dl814_k7_cal_coarse

archive dl814_k7_cal_coarse_20230419 and dl814_k7_null_verify_20230420, the function of lcmv nulling algorithm and the data exchange between boards are verified by pre-generated data

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/README.txt

@@ -0,0 +1 @@
+The files in this directory structure are automatically generated and managed by Vivado. Editing these files is not recommended.

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ad9361_clk_gen/ad9361_clk_gen.v

@@ -0,0 +1,99 @@
+
+// file: ad9361_clk_gen.v
+// 
+// (c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+//----------------------------------------------------------------------------
+// User entered comments
+//----------------------------------------------------------------------------
+// None
+//
+//----------------------------------------------------------------------------
+//  Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase
+//   Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)
+//----------------------------------------------------------------------------
+// clk_out1____48.000______0.000______50.0______176.382____161.578
+// clk_out2____96.000______0.000______50.0______148.620____161.578
+// clk_out3___144.000______0.000______50.0______137.385____161.578
+// clk_out4___192.000______0.000______50.0______131.258____161.578
+//
+//----------------------------------------------------------------------------
+// Input Clock   Freq (MHz)    Input Jitter (UI)
+//----------------------------------------------------------------------------
+// __primary______________48____________0.010
+
+`timescale 1ps/1ps
+
+(* CORE_GENERATION_INFO = "ad9361_clk_gen,clk_wiz_v6_0_3_0_0,{component_name=ad9361_clk_gen,use_phase_alignment=true,use_min_o_jitter=false,use_max_i_jitter=false,use_dyn_phase_shift=false,use_inclk_switchover=false,use_dyn_reconfig=false,enable_axi=0,feedback_source=FDBK_AUTO,PRIMITIVE=MMCM,num_out_clk=4,clkin1_period=20.833,clkin2_period=10.0,use_power_down=false,use_reset=false,use_locked=true,use_inclk_stopped=false,feedback_type=SINGLE,CLOCK_MGR_TYPE=NA,manual_override=false}" *)
+
+module ad9361_clk_gen 
+ (
+  // Clock out ports
+  output        clk_out1,
+  output        clk_out2,
+  output        clk_out3,
+  output        clk_out4,
+  // Status and control signals
+  output        locked,
+ // Clock in ports
+  input         clk_in1
+ );
+
+  ad9361_clk_gen_clk_wiz inst
+  (
+  // Clock out ports  
+  .clk_out1(clk_out1),
+  .clk_out2(clk_out2),
+  .clk_out3(clk_out3),
+  .clk_out4(clk_out4),
+  // Status and control signals               
+  .locked(locked),
+ // Clock in ports
+  .clk_in1(clk_in1)
+  );
+
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ad9361_clk_gen/ad9361_clk_gen.veo

@@ -0,0 +1,85 @@
+
+// 
+// (c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+//----------------------------------------------------------------------------
+// User entered comments
+//----------------------------------------------------------------------------
+// None
+//
+//----------------------------------------------------------------------------
+//  Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase
+//   Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)
+//----------------------------------------------------------------------------
+// clk_out1____48.000______0.000______50.0______176.382____161.578
+// clk_out2____96.000______0.000______50.0______148.620____161.578
+// clk_out3___144.000______0.000______50.0______137.385____161.578
+// clk_out4___192.000______0.000______50.0______131.258____161.578
+//
+//----------------------------------------------------------------------------
+// Input Clock   Freq (MHz)    Input Jitter (UI)
+//----------------------------------------------------------------------------
+// __primary______________48____________0.010
+
+// The following must be inserted into your Verilog file for this
+// core to be instantiated. Change the instance name and port connections
+// (in parentheses) to your own signal names.
+
+//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
+
+  ad9361_clk_gen instance_name
+   (
+    // Clock out ports
+    .clk_out1(clk_out1),     // output clk_out1
+    .clk_out2(clk_out2),     // output clk_out2
+    .clk_out3(clk_out3),     // output clk_out3
+    .clk_out4(clk_out4),     // output clk_out4
+    // Status and control signals
+    .locked(locked),       // output locked
+   // Clock in ports
+    .clk_in1(clk_in1));      // input clk_in1
+// INST_TAG_END ------ End INSTANTIATION Template ---------

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ad9361_clk_gen/ad9361_clk_gen_clk_wiz.v

@@ -0,0 +1,228 @@
+
+// file: ad9361_clk_gen.v
+// 
+// (c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+//----------------------------------------------------------------------------
+// User entered comments
+//----------------------------------------------------------------------------
+// None
+//
+//----------------------------------------------------------------------------
+//  Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase
+//   Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)
+//----------------------------------------------------------------------------
+// clk_out1____48.000______0.000______50.0______176.382____161.578
+// clk_out2____96.000______0.000______50.0______148.620____161.578
+// clk_out3___144.000______0.000______50.0______137.385____161.578
+// clk_out4___192.000______0.000______50.0______131.258____161.578
+//
+//----------------------------------------------------------------------------
+// Input Clock   Freq (MHz)    Input Jitter (UI)
+//----------------------------------------------------------------------------
+// __primary______________48____________0.010
+
+`timescale 1ps/1ps
+
+module ad9361_clk_gen_clk_wiz 
+
+ (// Clock in ports
+  // Clock out ports
+  output        clk_out1,
+  output        clk_out2,
+  output        clk_out3,
+  output        clk_out4,
+  // Status and control signals
+  output        locked,
+  input         clk_in1
+ );
+  // Input buffering
+  //------------------------------------
+wire clk_in1_ad9361_clk_gen;
+wire clk_in2_ad9361_clk_gen;
+  BUFG clkin1_bufg
+   (.O (clk_in1_ad9361_clk_gen),
+    .I (clk_in1));
+
+
+
+
+  // Clocking PRIMITIVE
+  //------------------------------------
+
+  // Instantiation of the MMCM PRIMITIVE
+  //    * Unused inputs are tied off
+  //    * Unused outputs are labeled unused
+
+  wire        clk_out1_ad9361_clk_gen;
+  wire        clk_out2_ad9361_clk_gen;
+  wire        clk_out3_ad9361_clk_gen;
+  wire        clk_out4_ad9361_clk_gen;
+  wire        clk_out5_ad9361_clk_gen;
+  wire        clk_out6_ad9361_clk_gen;
+  wire        clk_out7_ad9361_clk_gen;
+
+  wire [15:0] do_unused;
+  wire        drdy_unused;
+  wire        psdone_unused;
+  wire        locked_int;
+  wire        clkfbout_ad9361_clk_gen;
+  wire        clkfbout_buf_ad9361_clk_gen;
+  wire        clkfboutb_unused;
+    wire clkout0b_unused;
+   wire clkout1b_unused;
+   wire clkout2b_unused;
+   wire clkout3b_unused;
+   wire clkout4_unused;
+  wire        clkout5_unused;
+  wire        clkout6_unused;
+  wire        clkfbstopped_unused;
+  wire        clkinstopped_unused;
+
+  MMCME2_ADV
+  #(.BANDWIDTH            ("OPTIMIZED"),
+    .CLKOUT4_CASCADE      ("FALSE"),
+    .COMPENSATION         ("ZHOLD"),
+    .STARTUP_WAIT         ("FALSE"),
+    .DIVCLK_DIVIDE        (1),
+    .CLKFBOUT_MULT_F      (24.000),
+    .CLKFBOUT_PHASE       (0.000),
+    .CLKFBOUT_USE_FINE_PS ("FALSE"),
+    .CLKOUT0_DIVIDE_F     (24.000),
+    .CLKOUT0_PHASE        (0.000),
+    .CLKOUT0_DUTY_CYCLE   (0.500),
+    .CLKOUT0_USE_FINE_PS  ("FALSE"),
+    .CLKOUT1_DIVIDE       (12),
+    .CLKOUT1_PHASE        (0.000),
+    .CLKOUT1_DUTY_CYCLE   (0.500),
+    .CLKOUT1_USE_FINE_PS  ("FALSE"),
+    .CLKOUT2_DIVIDE       (8),
+    .CLKOUT2_PHASE        (0.000),
+    .CLKOUT2_DUTY_CYCLE   (0.500),
+    .CLKOUT2_USE_FINE_PS  ("FALSE"),
+    .CLKOUT3_DIVIDE       (6),
+    .CLKOUT3_PHASE        (0.000),
+    .CLKOUT3_DUTY_CYCLE   (0.500),
+    .CLKOUT3_USE_FINE_PS  ("FALSE"),
+    .CLKIN1_PERIOD        (20.833))
+  mmcm_adv_inst
+    // Output clocks
+   (
+    .CLKFBOUT            (clkfbout_ad9361_clk_gen),
+    .CLKFBOUTB           (clkfboutb_unused),
+    .CLKOUT0             (clk_out1_ad9361_clk_gen),
+    .CLKOUT0B            (clkout0b_unused),
+    .CLKOUT1             (clk_out2_ad9361_clk_gen),
+    .CLKOUT1B            (clkout1b_unused),
+    .CLKOUT2             (clk_out3_ad9361_clk_gen),
+    .CLKOUT2B            (clkout2b_unused),
+    .CLKOUT3             (clk_out4_ad9361_clk_gen),
+    .CLKOUT3B            (clkout3b_unused),
+    .CLKOUT4             (clkout4_unused),
+    .CLKOUT5             (clkout5_unused),
+    .CLKOUT6             (clkout6_unused),
+     // Input clock control
+    .CLKFBIN             (clkfbout_buf_ad9361_clk_gen),
+    .CLKIN1              (clk_in1_ad9361_clk_gen),
+    .CLKIN2              (1'b0),
+     // Tied to always select the primary input clock
+    .CLKINSEL            (1'b1),
+    // Ports for dynamic reconfiguration
+    .DADDR               (7'h0),
+    .DCLK                (1'b0),
+    .DEN                 (1'b0),
+    .DI                  (16'h0),
+    .DO                  (do_unused),
+    .DRDY                (drdy_unused),
+    .DWE                 (1'b0),
+    // Ports for dynamic phase shift
+    .PSCLK               (1'b0),
+    .PSEN                (1'b0),
+    .PSINCDEC            (1'b0),
+    .PSDONE              (psdone_unused),
+    // Other control and status signals
+    .LOCKED              (locked_int),
+    .CLKINSTOPPED        (clkinstopped_unused),
+    .CLKFBSTOPPED        (clkfbstopped_unused),
+    .PWRDWN              (1'b0),
+    .RST                 (1'b0));
+
+  assign locked = locked_int;
+// Clock Monitor clock assigning
+//--------------------------------------
+ // Output buffering
+  //-----------------------------------
+
+  BUFG clkf_buf
+   (.O (clkfbout_buf_ad9361_clk_gen),
+    .I (clkfbout_ad9361_clk_gen));
+
+
+
+
+
+
+  BUFG clkout1_buf
+   (.O   (clk_out1),
+    .I   (clk_out1_ad9361_clk_gen));
+
+
+  BUFG clkout2_buf
+   (.O   (clk_out2),
+    .I   (clk_out2_ad9361_clk_gen));
+
+  BUFG clkout3_buf
+   (.O   (clk_out3),
+    .I   (clk_out3_ad9361_clk_gen));
+
+  BUFG clkout4_buf
+   (.O   (clk_out4),
+    .I   (clk_out4_ad9361_clk_gen));
+
+
+
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ad9361_clk_gen/ad9361_clk_gen_stub.v

@@ -0,0 +1,25 @@
+// Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+// --------------------------------------------------------------------------------
+// Tool Version: Vivado v.2019.1.3 (win64) Build 2644227 Wed Sep  4 09:45:24 MDT 2019
+// Date        : Thu Dec  1 20:30:25 2022
+// Host        : Gatsby-Hasee running 64-bit major release  (build 9200)
+// Command     : write_verilog -force -mode synth_stub
+//               D:/Workspace/datalink_814/dl814_k7_null_verify/dl814_k7_null_verify.runs/ad9361_clk_gen_synth_1/ad9361_clk_gen_stub.v
+// Design      : ad9361_clk_gen
+// Purpose     : Stub declaration of top-level module interface
+// Device      : xc7k410tffg900-2
+// --------------------------------------------------------------------------------
+
+// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
+// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
+// Please paste the declaration into a Verilog source file or add the file as an additional source.
+module ad9361_clk_gen(clk_out1, clk_out2, clk_out3, clk_out4, locked, 
+  clk_in1)
+/* synthesis syn_black_box black_box_pad_pin="clk_out1,clk_out2,clk_out3,clk_out4,locked,clk_in1" */;
+  output clk_out1;
+  output clk_out2;
+  output clk_out3;
+  output clk_out4;
+  output locked;
+  input clk_in1;
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ad9361_clk_gen/ad9361_clk_gen_stub.vhdl

@@ -0,0 +1,33 @@
+-- Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+-- --------------------------------------------------------------------------------
+-- Tool Version: Vivado v.2019.1.3 (win64) Build 2644227 Wed Sep  4 09:45:24 MDT 2019
+-- Date        : Thu Dec  1 20:30:25 2022
+-- Host        : Gatsby-Hasee running 64-bit major release  (build 9200)
+-- Command     : write_vhdl -force -mode synth_stub
+--               D:/Workspace/datalink_814/dl814_k7_null_verify/dl814_k7_null_verify.runs/ad9361_clk_gen_synth_1/ad9361_clk_gen_stub.vhdl
+-- Design      : ad9361_clk_gen
+-- Purpose     : Stub declaration of top-level module interface
+-- Device      : xc7k410tffg900-2
+-- --------------------------------------------------------------------------------
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity ad9361_clk_gen is
+  Port ( 
+    clk_out1 : out STD_LOGIC;
+    clk_out2 : out STD_LOGIC;
+    clk_out3 : out STD_LOGIC;
+    clk_out4 : out STD_LOGIC;
+    locked : out STD_LOGIC;
+    clk_in1 : in STD_LOGIC
+  );
+
+end ad9361_clk_gen;
+
+architecture stub of ad9361_clk_gen is
+attribute syn_black_box : boolean;
+attribute black_box_pad_pin : string;
+attribute syn_black_box of stub : architecture is true;
+attribute black_box_pad_pin of stub : architecture is "clk_out1,clk_out2,clk_out3,clk_out4,locked,clk_in1";
+begin
+end;

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ant_clk_gen/ant_clk_gen.v

@@ -0,0 +1,99 @@
+
+// file: ant_clk_gen.v
+// 
+// (c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+//----------------------------------------------------------------------------
+// User entered comments
+//----------------------------------------------------------------------------
+// None
+//
+//----------------------------------------------------------------------------
+//  Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase
+//   Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)
+//----------------------------------------------------------------------------
+// clk_out1____96.000______0.000______50.0______172.020____172.145
+// clk_out2____48.000______0.000______50.0______205.230____172.145
+// clk_out3____32.000______0.000______50.0______231.638____172.145
+// clk_out4____19.200______0.000______50.0______262.786____172.145
+//
+//----------------------------------------------------------------------------
+// Input Clock   Freq (MHz)    Input Jitter (UI)
+//----------------------------------------------------------------------------
+// __primary______________48____________0.010
+
+`timescale 1ps/1ps
+
+(* CORE_GENERATION_INFO = "ant_clk_gen,clk_wiz_v6_0_3_0_0,{component_name=ant_clk_gen,use_phase_alignment=true,use_min_o_jitter=false,use_max_i_jitter=false,use_dyn_phase_shift=false,use_inclk_switchover=false,use_dyn_reconfig=false,enable_axi=0,feedback_source=FDBK_AUTO,PRIMITIVE=MMCM,num_out_clk=4,clkin1_period=20.833,clkin2_period=10.0,use_power_down=false,use_reset=false,use_locked=true,use_inclk_stopped=false,feedback_type=SINGLE,CLOCK_MGR_TYPE=NA,manual_override=false}" *)
+
+module ant_clk_gen 
+ (
+  // Clock out ports
+  output        clk_out1,
+  output        clk_out2,
+  output        clk_out3,
+  output        clk_out4,
+  // Status and control signals
+  output        locked,
+ // Clock in ports
+  input         clk_in1
+ );
+
+  ant_clk_gen_clk_wiz inst
+  (
+  // Clock out ports  
+  .clk_out1(clk_out1),
+  .clk_out2(clk_out2),
+  .clk_out3(clk_out3),
+  .clk_out4(clk_out4),
+  // Status and control signals               
+  .locked(locked),
+ // Clock in ports
+  .clk_in1(clk_in1)
+  );
+
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ant_clk_gen/ant_clk_gen.veo

@@ -0,0 +1,85 @@
+
+// 
+// (c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+//----------------------------------------------------------------------------
+// User entered comments
+//----------------------------------------------------------------------------
+// None
+//
+//----------------------------------------------------------------------------
+//  Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase
+//   Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)
+//----------------------------------------------------------------------------
+// clk_out1____96.000______0.000______50.0______172.020____172.145
+// clk_out2____48.000______0.000______50.0______205.230____172.145
+// clk_out3____32.000______0.000______50.0______231.638____172.145
+// clk_out4____19.200______0.000______50.0______262.786____172.145
+//
+//----------------------------------------------------------------------------
+// Input Clock   Freq (MHz)    Input Jitter (UI)
+//----------------------------------------------------------------------------
+// __primary______________48____________0.010
+
+// The following must be inserted into your Verilog file for this
+// core to be instantiated. Change the instance name and port connections
+// (in parentheses) to your own signal names.
+
+//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
+
+  ant_clk_gen instance_name
+   (
+    // Clock out ports
+    .clk_out1(clk_out1),     // output clk_out1
+    .clk_out2(clk_out2),     // output clk_out2
+    .clk_out3(clk_out3),     // output clk_out3
+    .clk_out4(clk_out4),     // output clk_out4
+    // Status and control signals
+    .locked(locked),       // output locked
+   // Clock in ports
+    .clk_in1(clk_in1));      // input clk_in1
+// INST_TAG_END ------ End INSTANTIATION Template ---------

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ant_clk_gen/ant_clk_gen_clk_wiz.v

@@ -0,0 +1,228 @@
+
+// file: ant_clk_gen.v
+// 
+// (c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+//----------------------------------------------------------------------------
+// User entered comments
+//----------------------------------------------------------------------------
+// None
+//
+//----------------------------------------------------------------------------
+//  Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase
+//   Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)
+//----------------------------------------------------------------------------
+// clk_out1____96.000______0.000______50.0______172.020____172.145
+// clk_out2____48.000______0.000______50.0______205.230____172.145
+// clk_out3____32.000______0.000______50.0______231.638____172.145
+// clk_out4____19.200______0.000______50.0______262.786____172.145
+//
+//----------------------------------------------------------------------------
+// Input Clock   Freq (MHz)    Input Jitter (UI)
+//----------------------------------------------------------------------------
+// __primary______________48____________0.010
+
+`timescale 1ps/1ps
+
+module ant_clk_gen_clk_wiz 
+
+ (// Clock in ports
+  // Clock out ports
+  output        clk_out1,
+  output        clk_out2,
+  output        clk_out3,
+  output        clk_out4,
+  // Status and control signals
+  output        locked,
+  input         clk_in1
+ );
+  // Input buffering
+  //------------------------------------
+wire clk_in1_ant_clk_gen;
+wire clk_in2_ant_clk_gen;
+  BUFG clkin1_bufg
+   (.O (clk_in1_ant_clk_gen),
+    .I (clk_in1));
+
+
+
+
+  // Clocking PRIMITIVE
+  //------------------------------------
+
+  // Instantiation of the MMCM PRIMITIVE
+  //    * Unused inputs are tied off
+  //    * Unused outputs are labeled unused
+
+  wire        clk_out1_ant_clk_gen;
+  wire        clk_out2_ant_clk_gen;
+  wire        clk_out3_ant_clk_gen;
+  wire        clk_out4_ant_clk_gen;
+  wire        clk_out5_ant_clk_gen;
+  wire        clk_out6_ant_clk_gen;
+  wire        clk_out7_ant_clk_gen;
+
+  wire [15:0] do_unused;
+  wire        drdy_unused;
+  wire        psdone_unused;
+  wire        locked_int;
+  wire        clkfbout_ant_clk_gen;
+  wire        clkfbout_buf_ant_clk_gen;
+  wire        clkfboutb_unused;
+    wire clkout0b_unused;
+   wire clkout1b_unused;
+   wire clkout2b_unused;
+   wire clkout3b_unused;
+   wire clkout4_unused;
+  wire        clkout5_unused;
+  wire        clkout6_unused;
+  wire        clkfbstopped_unused;
+  wire        clkinstopped_unused;
+
+  MMCME2_ADV
+  #(.BANDWIDTH            ("OPTIMIZED"),
+    .CLKOUT4_CASCADE      ("FALSE"),
+    .COMPENSATION         ("ZHOLD"),
+    .STARTUP_WAIT         ("FALSE"),
+    .DIVCLK_DIVIDE        (1),
+    .CLKFBOUT_MULT_F      (20.000),
+    .CLKFBOUT_PHASE       (0.000),
+    .CLKFBOUT_USE_FINE_PS ("FALSE"),
+    .CLKOUT0_DIVIDE_F     (10.000),
+    .CLKOUT0_PHASE        (0.000),
+    .CLKOUT0_DUTY_CYCLE   (0.500),
+    .CLKOUT0_USE_FINE_PS  ("FALSE"),
+    .CLKOUT1_DIVIDE       (20),
+    .CLKOUT1_PHASE        (0.000),
+    .CLKOUT1_DUTY_CYCLE   (0.500),
+    .CLKOUT1_USE_FINE_PS  ("FALSE"),
+    .CLKOUT2_DIVIDE       (30),
+    .CLKOUT2_PHASE        (0.000),
+    .CLKOUT2_DUTY_CYCLE   (0.500),
+    .CLKOUT2_USE_FINE_PS  ("FALSE"),
+    .CLKOUT3_DIVIDE       (50),
+    .CLKOUT3_PHASE        (0.000),
+    .CLKOUT3_DUTY_CYCLE   (0.500),
+    .CLKOUT3_USE_FINE_PS  ("FALSE"),
+    .CLKIN1_PERIOD        (20.833))
+  mmcm_adv_inst
+    // Output clocks
+   (
+    .CLKFBOUT            (clkfbout_ant_clk_gen),
+    .CLKFBOUTB           (clkfboutb_unused),
+    .CLKOUT0             (clk_out1_ant_clk_gen),
+    .CLKOUT0B            (clkout0b_unused),
+    .CLKOUT1             (clk_out2_ant_clk_gen),
+    .CLKOUT1B            (clkout1b_unused),
+    .CLKOUT2             (clk_out3_ant_clk_gen),
+    .CLKOUT2B            (clkout2b_unused),
+    .CLKOUT3             (clk_out4_ant_clk_gen),
+    .CLKOUT3B            (clkout3b_unused),
+    .CLKOUT4             (clkout4_unused),
+    .CLKOUT5             (clkout5_unused),
+    .CLKOUT6             (clkout6_unused),
+     // Input clock control
+    .CLKFBIN             (clkfbout_buf_ant_clk_gen),
+    .CLKIN1              (clk_in1_ant_clk_gen),
+    .CLKIN2              (1'b0),
+     // Tied to always select the primary input clock
+    .CLKINSEL            (1'b1),
+    // Ports for dynamic reconfiguration
+    .DADDR               (7'h0),
+    .DCLK                (1'b0),
+    .DEN                 (1'b0),
+    .DI                  (16'h0),
+    .DO                  (do_unused),
+    .DRDY                (drdy_unused),
+    .DWE                 (1'b0),
+    // Ports for dynamic phase shift
+    .PSCLK               (1'b0),
+    .PSEN                (1'b0),
+    .PSINCDEC            (1'b0),
+    .PSDONE              (psdone_unused),
+    // Other control and status signals
+    .LOCKED              (locked_int),
+    .CLKINSTOPPED        (clkinstopped_unused),
+    .CLKFBSTOPPED        (clkfbstopped_unused),
+    .PWRDWN              (1'b0),
+    .RST                 (1'b0));
+
+  assign locked = locked_int;
+// Clock Monitor clock assigning
+//--------------------------------------
+ // Output buffering
+  //-----------------------------------
+
+  BUFG clkf_buf
+   (.O (clkfbout_buf_ant_clk_gen),
+    .I (clkfbout_ant_clk_gen));
+
+
+
+
+
+
+  BUFG clkout1_buf
+   (.O   (clk_out1),
+    .I   (clk_out1_ant_clk_gen));
+
+
+  BUFG clkout2_buf
+   (.O   (clk_out2),
+    .I   (clk_out2_ant_clk_gen));
+
+  BUFG clkout3_buf
+   (.O   (clk_out3),
+    .I   (clk_out3_ant_clk_gen));
+
+  BUFG clkout4_buf
+   (.O   (clk_out4),
+    .I   (clk_out4_ant_clk_gen));
+
+
+
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ant_clk_gen/ant_clk_gen_stub.v

@@ -0,0 +1,25 @@
+// Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+// --------------------------------------------------------------------------------
+// Tool Version: Vivado v.2019.1.3 (win64) Build 2644227 Wed Sep  4 09:45:24 MDT 2019
+// Date        : Thu Dec  1 20:32:34 2022
+// Host        : Gatsby-Hasee running 64-bit major release  (build 9200)
+// Command     : write_verilog -force -mode synth_stub
+//               D:/Workspace/datalink_814/dl814_k7_null_verify/dl814_k7_null_verify.runs/ant_clk_gen_synth_1/ant_clk_gen_stub.v
+// Design      : ant_clk_gen
+// Purpose     : Stub declaration of top-level module interface
+// Device      : xc7k410tffg900-2
+// --------------------------------------------------------------------------------
+
+// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
+// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
+// Please paste the declaration into a Verilog source file or add the file as an additional source.
+module ant_clk_gen(clk_out1, clk_out2, clk_out3, clk_out4, locked, 
+  clk_in1)
+/* synthesis syn_black_box black_box_pad_pin="clk_out1,clk_out2,clk_out3,clk_out4,locked,clk_in1" */;
+  output clk_out1;
+  output clk_out2;
+  output clk_out3;
+  output clk_out4;
+  output locked;
+  input clk_in1;
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ant_clk_gen/ant_clk_gen_stub.vhdl

@@ -0,0 +1,33 @@
+-- Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+-- --------------------------------------------------------------------------------
+-- Tool Version: Vivado v.2019.1.3 (win64) Build 2644227 Wed Sep  4 09:45:24 MDT 2019
+-- Date        : Thu Dec  1 20:32:34 2022
+-- Host        : Gatsby-Hasee running 64-bit major release  (build 9200)
+-- Command     : write_vhdl -force -mode synth_stub
+--               D:/Workspace/datalink_814/dl814_k7_null_verify/dl814_k7_null_verify.runs/ant_clk_gen_synth_1/ant_clk_gen_stub.vhdl
+-- Design      : ant_clk_gen
+-- Purpose     : Stub declaration of top-level module interface
+-- Device      : xc7k410tffg900-2
+-- --------------------------------------------------------------------------------
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity ant_clk_gen is
+  Port ( 
+    clk_out1 : out STD_LOGIC;
+    clk_out2 : out STD_LOGIC;
+    clk_out3 : out STD_LOGIC;
+    clk_out4 : out STD_LOGIC;
+    locked : out STD_LOGIC;
+    clk_in1 : in STD_LOGIC
+  );
+
+end ant_clk_gen;
+
+architecture stub of ant_clk_gen is
+attribute syn_black_box : boolean;
+attribute black_box_pad_pin : string;
+attribute syn_black_box of stub : architecture is true;
+attribute black_box_pad_pin of stub : architecture is "clk_out1,clk_out2,clk_out3,clk_out4,locked,clk_in1";
+begin
+end;

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/fifo_accor_cdc/fifo_accor_cdc.veo

@@ -0,0 +1,75 @@
+// (c) Copyright 1995-2023 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+// DO NOT MODIFY THIS FILE.
+
+// IP VLNV: xilinx.com:ip:fifo_generator:13.2
+// IP Revision: 4
+
+// The following must be inserted into your Verilog file for this
+// core to be instantiated. Change the instance name and port connections
+// (in parentheses) to your own signal names.
+
+//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
+fifo_accor_cdc your_instance_name (
+  .wr_clk(wr_clk),                // input wire wr_clk
+  .wr_rst(wr_rst),                // input wire wr_rst
+  .rd_clk(rd_clk),                // input wire rd_clk
+  .rd_rst(rd_rst),                // input wire rd_rst
+  .din(din),                      // input wire [31 : 0] din
+  .wr_en(wr_en),                  // input wire wr_en
+  .rd_en(rd_en),                  // input wire rd_en
+  .dout(dout),                    // output wire [31 : 0] dout
+  .full(full),                    // output wire full
+  .empty(empty),                  // output wire empty
+  .rd_data_count(rd_data_count)  // output wire [4 : 0] rd_data_count
+);
+// INST_TAG_END ------ End INSTANTIATION Template ---------
+
+// You must compile the wrapper file fifo_accor_cdc.v when simulating
+// the core, fifo_accor_cdc. When compiling the wrapper file, be sure to
+// reference the Verilog simulation library.
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/fifo_accor_cdc/fifo_accor_cdc.vho

@@ -0,0 +1,95 @@
+-- (c) Copyright 1995-2023 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+-- DO NOT MODIFY THIS FILE.
+
+-- IP VLNV: xilinx.com:ip:fifo_generator:13.2
+-- IP Revision: 4
+
+-- The following code must appear in the VHDL architecture header.
+
+------------- Begin Cut here for COMPONENT Declaration ------ COMP_TAG
+COMPONENT fifo_accor_cdc
+  PORT (
+    wr_clk : IN STD_LOGIC;
+    wr_rst : IN STD_LOGIC;
+    rd_clk : IN STD_LOGIC;
+    rd_rst : IN STD_LOGIC;
+    din : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
+    wr_en : IN STD_LOGIC;
+    rd_en : IN STD_LOGIC;
+    dout : OUT STD_LOGIC_VECTOR(31 DOWNTO 0);
+    full : OUT STD_LOGIC;
+    empty : OUT STD_LOGIC;
+    rd_data_count : OUT STD_LOGIC_VECTOR(4 DOWNTO 0)
+  );
+END COMPONENT;
+-- COMP_TAG_END ------ End COMPONENT Declaration ------------
+
+-- The following code must appear in the VHDL architecture
+-- body. Substitute your own instance name and net names.
+
+------------- Begin Cut here for INSTANTIATION Template ----- INST_TAG
+your_instance_name : fifo_accor_cdc
+  PORT MAP (
+    wr_clk => wr_clk,
+    wr_rst => wr_rst,
+    rd_clk => rd_clk,
+    rd_rst => rd_rst,
+    din => din,
+    wr_en => wr_en,
+    rd_en => rd_en,
+    dout => dout,
+    full => full,
+    empty => empty,
+    rd_data_count => rd_data_count
+  );
+-- INST_TAG_END ------ End INSTANTIATION Template ---------
+
+-- You must compile the wrapper file fifo_accor_cdc.vhd when simulating
+-- the core, fifo_accor_cdc. When compiling the wrapper file, be sure to
+-- reference the VHDL simulation library.
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/fifo_accor_cdc/fifo_accor_cdc_stub.v

@@ -0,0 +1,31 @@
+// Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+// --------------------------------------------------------------------------------
+// Tool Version: Vivado v.2019.1.3 (lin64) Build 2644227 Wed Sep  4 09:44:18 MDT 2019
+// Date        : Wed Apr 12 20:00:11 2023
+// Host        : JOSH-ASUS-Z690 running 64-bit Ubuntu 20.04.6 LTS
+// Command     : write_verilog -force -mode synth_stub
+//               /home/josh/Workspace/vivado-git/projects/dl814_k7/common_ip/managed_ip_project/managed_ip_project.runs/fifo_accor_cdc_synth_1/fifo_accor_cdc_stub.v
+// Design      : fifo_accor_cdc
+// Purpose     : Stub declaration of top-level module interface
+// Device      : xc7k410tffg900-2
+// --------------------------------------------------------------------------------
+
+// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
+// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
+// Please paste the declaration into a Verilog source file or add the file as an additional source.
+(* x_core_info = "fifo_generator_v13_2_4,Vivado 2019.1.3" *)
+module fifo_accor_cdc(wr_clk, wr_rst, rd_clk, rd_rst, din, wr_en, rd_en, 
+  dout, full, empty, rd_data_count)
+/* synthesis syn_black_box black_box_pad_pin="wr_clk,wr_rst,rd_clk,rd_rst,din[31:0],wr_en,rd_en,dout[31:0],full,empty,rd_data_count[4:0]" */;
+  input wr_clk;
+  input wr_rst;
+  input rd_clk;
+  input rd_rst;
+  input [31:0]din;
+  input wr_en;
+  input rd_en;
+  output [31:0]dout;
+  output full;
+  output empty;
+  output [4:0]rd_data_count;
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/fifo_accor_cdc/fifo_accor_cdc_stub.vhdl

@@ -0,0 +1,40 @@
+-- Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+-- --------------------------------------------------------------------------------
+-- Tool Version: Vivado v.2019.1.3 (lin64) Build 2644227 Wed Sep  4 09:44:18 MDT 2019
+-- Date        : Wed Apr 12 20:00:11 2023
+-- Host        : JOSH-ASUS-Z690 running 64-bit Ubuntu 20.04.6 LTS
+-- Command     : write_vhdl -force -mode synth_stub
+--               /home/josh/Workspace/vivado-git/projects/dl814_k7/common_ip/managed_ip_project/managed_ip_project.runs/fifo_accor_cdc_synth_1/fifo_accor_cdc_stub.vhdl
+-- Design      : fifo_accor_cdc
+-- Purpose     : Stub declaration of top-level module interface
+-- Device      : xc7k410tffg900-2
+-- --------------------------------------------------------------------------------
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity fifo_accor_cdc is
+  Port ( 
+    wr_clk : in STD_LOGIC;
+    wr_rst : in STD_LOGIC;
+    rd_clk : in STD_LOGIC;
+    rd_rst : in STD_LOGIC;
+    din : in STD_LOGIC_VECTOR ( 31 downto 0 );
+    wr_en : in STD_LOGIC;
+    rd_en : in STD_LOGIC;
+    dout : out STD_LOGIC_VECTOR ( 31 downto 0 );
+    full : out STD_LOGIC;
+    empty : out STD_LOGIC;
+    rd_data_count : out STD_LOGIC_VECTOR ( 4 downto 0 )
+  );
+
+end fifo_accor_cdc;
+
+architecture stub of fifo_accor_cdc is
+attribute syn_black_box : boolean;
+attribute black_box_pad_pin : string;
+attribute syn_black_box of stub : architecture is true;
+attribute black_box_pad_pin of stub : architecture is "wr_clk,wr_rst,rd_clk,rd_rst,din[31:0],wr_en,rd_en,dout[31:0],full,empty,rd_data_count[4:0]";
+attribute x_core_info : string;
+attribute x_core_info of stub : architecture is "fifo_generator_v13_2_4,Vivado 2019.1.3";
+begin
+end;

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/fifo_accor_cdc/sim/fifo_accor_cdc.v

@@ -0,0 +1,528 @@
+// (c) Copyright 1995-2023 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+// DO NOT MODIFY THIS FILE.
+
+
+// IP VLNV: xilinx.com:ip:fifo_generator:13.2
+// IP Revision: 4
+
+`timescale 1ns/1ps
+
+(* DowngradeIPIdentifiedWarnings = "yes" *)
+module fifo_accor_cdc (
+  wr_clk,
+  wr_rst,
+  rd_clk,
+  rd_rst,
+  din,
+  wr_en,
+  rd_en,
+  dout,
+  full,
+  empty,
+  rd_data_count
+);
+
+(* X_INTERFACE_PARAMETER = "XIL_INTERFACENAME write_clk, FREQ_HZ 100000000, PHASE 0.000, INSERT_VIP 0" *)
+(* X_INTERFACE_INFO = "xilinx.com:signal:clock:1.0 write_clk CLK" *)
+input wire wr_clk;
+input wire wr_rst;
+(* X_INTERFACE_PARAMETER = "XIL_INTERFACENAME read_clk, FREQ_HZ 100000000, PHASE 0.000, INSERT_VIP 0" *)
+(* X_INTERFACE_INFO = "xilinx.com:signal:clock:1.0 read_clk CLK" *)
+input wire rd_clk;
+input wire rd_rst;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_write:1.0 FIFO_WRITE WR_DATA" *)
+input wire [31 : 0] din;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_write:1.0 FIFO_WRITE WR_EN" *)
+input wire wr_en;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_read:1.0 FIFO_READ RD_EN" *)
+input wire rd_en;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_read:1.0 FIFO_READ RD_DATA" *)
+output wire [31 : 0] dout;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_write:1.0 FIFO_WRITE FULL" *)
+output wire full;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_read:1.0 FIFO_READ EMPTY" *)
+output wire empty;
+output wire [4 : 0] rd_data_count;
+
+  fifo_generator_v13_2_4 #(
+    .C_COMMON_CLOCK(0),
+    .C_SELECT_XPM(0),
+    .C_COUNT_TYPE(0),
+    .C_DATA_COUNT_WIDTH(5),
+    .C_DEFAULT_VALUE("BlankString"),
+    .C_DIN_WIDTH(32),
+    .C_DOUT_RST_VAL("0"),
+    .C_DOUT_WIDTH(32),
+    .C_ENABLE_RLOCS(0),
+    .C_FAMILY("kintex7"),
+    .C_FULL_FLAGS_RST_VAL(1),
+    .C_HAS_ALMOST_EMPTY(0),
+    .C_HAS_ALMOST_FULL(0),
+    .C_HAS_BACKUP(0),
+    .C_HAS_DATA_COUNT(0),
+    .C_HAS_INT_CLK(0),
+    .C_HAS_MEMINIT_FILE(0),
+    .C_HAS_OVERFLOW(0),
+    .C_HAS_RD_DATA_COUNT(1),
+    .C_HAS_RD_RST(0),
+    .C_HAS_RST(1),
+    .C_HAS_SRST(0),
+    .C_HAS_UNDERFLOW(0),
+    .C_HAS_VALID(0),
+    .C_HAS_WR_ACK(0),
+    .C_HAS_WR_DATA_COUNT(0),
+    .C_HAS_WR_RST(0),
+    .C_IMPLEMENTATION_TYPE(2),
+    .C_INIT_WR_PNTR_VAL(0),
+    .C_MEMORY_TYPE(2),
+    .C_MIF_FILE_NAME("BlankString"),
+    .C_OPTIMIZATION_MODE(0),
+    .C_OVERFLOW_LOW(0),
+    .C_PRELOAD_LATENCY(1),
+    .C_PRELOAD_REGS(0),
+    .C_PRIM_FIFO_TYPE("512x36"),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL(2),
+    .C_PROG_EMPTY_THRESH_NEGATE_VAL(3),
+    .C_PROG_EMPTY_TYPE(0),
+    .C_PROG_FULL_THRESH_ASSERT_VAL(29),
+    .C_PROG_FULL_THRESH_NEGATE_VAL(28),
+    .C_PROG_FULL_TYPE(0),
+    .C_RD_DATA_COUNT_WIDTH(5),
+    .C_RD_DEPTH(32),
+    .C_RD_FREQ(1),
+    .C_RD_PNTR_WIDTH(5),
+    .C_UNDERFLOW_LOW(0),
+    .C_USE_DOUT_RST(1),
+    .C_USE_ECC(0),
+    .C_USE_EMBEDDED_REG(0),
+    .C_USE_PIPELINE_REG(0),
+    .C_POWER_SAVING_MODE(0),
+    .C_USE_FIFO16_FLAGS(0),
+    .C_USE_FWFT_DATA_COUNT(0),
+    .C_VALID_LOW(0),
+    .C_WR_ACK_LOW(0),
+    .C_WR_DATA_COUNT_WIDTH(5),
+    .C_WR_DEPTH(32),
+    .C_WR_FREQ(1),
+    .C_WR_PNTR_WIDTH(5),
+    .C_WR_RESPONSE_LATENCY(1),
+    .C_MSGON_VAL(1),
+    .C_ENABLE_RST_SYNC(0),
+    .C_EN_SAFETY_CKT(0),
+    .C_ERROR_INJECTION_TYPE(0),
+    .C_SYNCHRONIZER_STAGE(2),
+    .C_INTERFACE_TYPE(0),
+    .C_AXI_TYPE(1),
+    .C_HAS_AXI_WR_CHANNEL(1),
+    .C_HAS_AXI_RD_CHANNEL(1),
+    .C_HAS_SLAVE_CE(0),
+    .C_HAS_MASTER_CE(0),
+    .C_ADD_NGC_CONSTRAINT(0),
+    .C_USE_COMMON_OVERFLOW(0),
+    .C_USE_COMMON_UNDERFLOW(0),
+    .C_USE_DEFAULT_SETTINGS(0),
+    .C_AXI_ID_WIDTH(1),
+    .C_AXI_ADDR_WIDTH(32),
+    .C_AXI_DATA_WIDTH(64),
+    .C_AXI_LEN_WIDTH(8),
+    .C_AXI_LOCK_WIDTH(1),
+    .C_HAS_AXI_ID(0),
+    .C_HAS_AXI_AWUSER(0),
+    .C_HAS_AXI_WUSER(0),
+    .C_HAS_AXI_BUSER(0),
+    .C_HAS_AXI_ARUSER(0),
+    .C_HAS_AXI_RUSER(0),
+    .C_AXI_ARUSER_WIDTH(1),
+    .C_AXI_AWUSER_WIDTH(1),
+    .C_AXI_WUSER_WIDTH(1),
+    .C_AXI_BUSER_WIDTH(1),
+    .C_AXI_RUSER_WIDTH(1),
+    .C_HAS_AXIS_TDATA(1),
+    .C_HAS_AXIS_TID(0),
+    .C_HAS_AXIS_TDEST(0),
+    .C_HAS_AXIS_TUSER(1),
+    .C_HAS_AXIS_TREADY(1),
+    .C_HAS_AXIS_TLAST(0),
+    .C_HAS_AXIS_TSTRB(0),
+    .C_HAS_AXIS_TKEEP(0),
+    .C_AXIS_TDATA_WIDTH(8),
+    .C_AXIS_TID_WIDTH(1),
+    .C_AXIS_TDEST_WIDTH(1),
+    .C_AXIS_TUSER_WIDTH(4),
+    .C_AXIS_TSTRB_WIDTH(1),
+    .C_AXIS_TKEEP_WIDTH(1),
+    .C_WACH_TYPE(0),
+    .C_WDCH_TYPE(0),
+    .C_WRCH_TYPE(0),
+    .C_RACH_TYPE(0),
+    .C_RDCH_TYPE(0),
+    .C_AXIS_TYPE(0),
+    .C_IMPLEMENTATION_TYPE_WACH(1),
+    .C_IMPLEMENTATION_TYPE_WDCH(1),
+    .C_IMPLEMENTATION_TYPE_WRCH(1),
+    .C_IMPLEMENTATION_TYPE_RACH(1),
+    .C_IMPLEMENTATION_TYPE_RDCH(1),
+    .C_IMPLEMENTATION_TYPE_AXIS(1),
+    .C_APPLICATION_TYPE_WACH(0),
+    .C_APPLICATION_TYPE_WDCH(0),
+    .C_APPLICATION_TYPE_WRCH(0),
+    .C_APPLICATION_TYPE_RACH(0),
+    .C_APPLICATION_TYPE_RDCH(0),
+    .C_APPLICATION_TYPE_AXIS(0),
+    .C_PRIM_FIFO_TYPE_WACH("512x36"),
+    .C_PRIM_FIFO_TYPE_WDCH("1kx36"),
+    .C_PRIM_FIFO_TYPE_WRCH("512x36"),
+    .C_PRIM_FIFO_TYPE_RACH("512x36"),
+    .C_PRIM_FIFO_TYPE_RDCH("1kx36"),
+    .C_PRIM_FIFO_TYPE_AXIS("1kx18"),
+    .C_USE_ECC_WACH(0),
+    .C_USE_ECC_WDCH(0),
+    .C_USE_ECC_WRCH(0),
+    .C_USE_ECC_RACH(0),
+    .C_USE_ECC_RDCH(0),
+    .C_USE_ECC_AXIS(0),
+    .C_ERROR_INJECTION_TYPE_WACH(0),
+    .C_ERROR_INJECTION_TYPE_WDCH(0),
+    .C_ERROR_INJECTION_TYPE_WRCH(0),
+    .C_ERROR_INJECTION_TYPE_RACH(0),
+    .C_ERROR_INJECTION_TYPE_RDCH(0),
+    .C_ERROR_INJECTION_TYPE_AXIS(0),
+    .C_DIN_WIDTH_WACH(1),
+    .C_DIN_WIDTH_WDCH(64),
+    .C_DIN_WIDTH_WRCH(2),
+    .C_DIN_WIDTH_RACH(32),
+    .C_DIN_WIDTH_RDCH(64),
+    .C_DIN_WIDTH_AXIS(1),
+    .C_WR_DEPTH_WACH(16),
+    .C_WR_DEPTH_WDCH(1024),
+    .C_WR_DEPTH_WRCH(16),
+    .C_WR_DEPTH_RACH(16),
+    .C_WR_DEPTH_RDCH(1024),
+    .C_WR_DEPTH_AXIS(1024),
+    .C_WR_PNTR_WIDTH_WACH(4),
+    .C_WR_PNTR_WIDTH_WDCH(10),
+    .C_WR_PNTR_WIDTH_WRCH(4),
+    .C_WR_PNTR_WIDTH_RACH(4),
+    .C_WR_PNTR_WIDTH_RDCH(10),
+    .C_WR_PNTR_WIDTH_AXIS(10),
+    .C_HAS_DATA_COUNTS_WACH(0),
+    .C_HAS_DATA_COUNTS_WDCH(0),
+    .C_HAS_DATA_COUNTS_WRCH(0),
+    .C_HAS_DATA_COUNTS_RACH(0),
+    .C_HAS_DATA_COUNTS_RDCH(0),
+    .C_HAS_DATA_COUNTS_AXIS(0),
+    .C_HAS_PROG_FLAGS_WACH(0),
+    .C_HAS_PROG_FLAGS_WDCH(0),
+    .C_HAS_PROG_FLAGS_WRCH(0),
+    .C_HAS_PROG_FLAGS_RACH(0),
+    .C_HAS_PROG_FLAGS_RDCH(0),
+    .C_HAS_PROG_FLAGS_AXIS(0),
+    .C_PROG_FULL_TYPE_WACH(0),
+    .C_PROG_FULL_TYPE_WDCH(0),
+    .C_PROG_FULL_TYPE_WRCH(0),
+    .C_PROG_FULL_TYPE_RACH(0),
+    .C_PROG_FULL_TYPE_RDCH(0),
+    .C_PROG_FULL_TYPE_AXIS(0),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_WACH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_WDCH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_WRCH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_RACH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_RDCH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_AXIS(1023),
+    .C_PROG_EMPTY_TYPE_WACH(0),
+    .C_PROG_EMPTY_TYPE_WDCH(0),
+    .C_PROG_EMPTY_TYPE_WRCH(0),
+    .C_PROG_EMPTY_TYPE_RACH(0),
+    .C_PROG_EMPTY_TYPE_RDCH(0),
+    .C_PROG_EMPTY_TYPE_AXIS(0),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_WACH(1022),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_WDCH(1022),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_WRCH(1022),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_RACH(1022),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_RDCH(1022),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_AXIS(1022),
+    .C_REG_SLICE_MODE_WACH(0),
+    .C_REG_SLICE_MODE_WDCH(0),
+    .C_REG_SLICE_MODE_WRCH(0),
+    .C_REG_SLICE_MODE_RACH(0),
+    .C_REG_SLICE_MODE_RDCH(0),
+    .C_REG_SLICE_MODE_AXIS(0)
+  ) inst (
+    .backup(1'D0),
+    .backup_marker(1'D0),
+    .clk(1'D0),
+    .rst(1'D0),
+    .srst(1'D0),
+    .wr_clk(wr_clk),
+    .wr_rst(wr_rst),
+    .rd_clk(rd_clk),
+    .rd_rst(rd_rst),
+    .din(din),
+    .wr_en(wr_en),
+    .rd_en(rd_en),
+    .prog_empty_thresh(5'B0),
+    .prog_empty_thresh_assert(5'B0),
+    .prog_empty_thresh_negate(5'B0),
+    .prog_full_thresh(5'B0),
+    .prog_full_thresh_assert(5'B0),
+    .prog_full_thresh_negate(5'B0),
+    .int_clk(1'D0),
+    .injectdbiterr(1'D0),
+    .injectsbiterr(1'D0),
+    .sleep(1'D0),
+    .dout(dout),
+    .full(full),
+    .almost_full(),
+    .wr_ack(),
+    .overflow(),
+    .empty(empty),
+    .almost_empty(),
+    .valid(),
+    .underflow(),
+    .data_count(),
+    .rd_data_count(rd_data_count),
+    .wr_data_count(),
+    .prog_full(),
+    .prog_empty(),
+    .sbiterr(),
+    .dbiterr(),
+    .wr_rst_busy(),
+    .rd_rst_busy(),
+    .m_aclk(1'D0),
+    .s_aclk(1'D0),
+    .s_aresetn(1'D0),
+    .m_aclk_en(1'D0),
+    .s_aclk_en(1'D0),
+    .s_axi_awid(1'B0),
+    .s_axi_awaddr(32'B0),
+    .s_axi_awlen(8'B0),
+    .s_axi_awsize(3'B0),
+    .s_axi_awburst(2'B0),
+    .s_axi_awlock(1'B0),
+    .s_axi_awcache(4'B0),
+    .s_axi_awprot(3'B0),
+    .s_axi_awqos(4'B0),
+    .s_axi_awregion(4'B0),
+    .s_axi_awuser(1'B0),
+    .s_axi_awvalid(1'D0),
+    .s_axi_awready(),
+    .s_axi_wid(1'B0),
+    .s_axi_wdata(64'B0),
+    .s_axi_wstrb(8'B0),
+    .s_axi_wlast(1'D0),
+    .s_axi_wuser(1'B0),
+    .s_axi_wvalid(1'D0),
+    .s_axi_wready(),
+    .s_axi_bid(),
+    .s_axi_bresp(),
+    .s_axi_buser(),
+    .s_axi_bvalid(),
+    .s_axi_bready(1'D0),
+    .m_axi_awid(),
+    .m_axi_awaddr(),
+    .m_axi_awlen(),
+    .m_axi_awsize(),
+    .m_axi_awburst(),
+    .m_axi_awlock(),
+    .m_axi_awcache(),
+    .m_axi_awprot(),
+    .m_axi_awqos(),
+    .m_axi_awregion(),
+    .m_axi_awuser(),
+    .m_axi_awvalid(),
+    .m_axi_awready(1'D0),
+    .m_axi_wid(),
+    .m_axi_wdata(),
+    .m_axi_wstrb(),
+    .m_axi_wlast(),
+    .m_axi_wuser(),
+    .m_axi_wvalid(),
+    .m_axi_wready(1'D0),
+    .m_axi_bid(1'B0),
+    .m_axi_bresp(2'B0),
+    .m_axi_buser(1'B0),
+    .m_axi_bvalid(1'D0),
+    .m_axi_bready(),
+    .s_axi_arid(1'B0),
+    .s_axi_araddr(32'B0),
+    .s_axi_arlen(8'B0),
+    .s_axi_arsize(3'B0),
+    .s_axi_arburst(2'B0),
+    .s_axi_arlock(1'B0),
+    .s_axi_arcache(4'B0),
+    .s_axi_arprot(3'B0),
+    .s_axi_arqos(4'B0),
+    .s_axi_arregion(4'B0),
+    .s_axi_aruser(1'B0),
+    .s_axi_arvalid(1'D0),
+    .s_axi_arready(),
+    .s_axi_rid(),
+    .s_axi_rdata(),
+    .s_axi_rresp(),
+    .s_axi_rlast(),
+    .s_axi_ruser(),
+    .s_axi_rvalid(),
+    .s_axi_rready(1'D0),
+    .m_axi_arid(),
+    .m_axi_araddr(),
+    .m_axi_arlen(),
+    .m_axi_arsize(),
+    .m_axi_arburst(),
+    .m_axi_arlock(),
+    .m_axi_arcache(),
+    .m_axi_arprot(),
+    .m_axi_arqos(),
+    .m_axi_arregion(),
+    .m_axi_aruser(),
+    .m_axi_arvalid(),
+    .m_axi_arready(1'D0),
+    .m_axi_rid(1'B0),
+    .m_axi_rdata(64'B0),
+    .m_axi_rresp(2'B0),
+    .m_axi_rlast(1'D0),
+    .m_axi_ruser(1'B0),
+    .m_axi_rvalid(1'D0),
+    .m_axi_rready(),
+    .s_axis_tvalid(1'D0),
+    .s_axis_tready(),
+    .s_axis_tdata(8'B0),
+    .s_axis_tstrb(1'B0),
+    .s_axis_tkeep(1'B0),
+    .s_axis_tlast(1'D0),
+    .s_axis_tid(1'B0),
+    .s_axis_tdest(1'B0),
+    .s_axis_tuser(4'B0),
+    .m_axis_tvalid(),
+    .m_axis_tready(1'D0),
+    .m_axis_tdata(),
+    .m_axis_tstrb(),
+    .m_axis_tkeep(),
+    .m_axis_tlast(),
+    .m_axis_tid(),
+    .m_axis_tdest(),
+    .m_axis_tuser(),
+    .axi_aw_injectsbiterr(1'D0),
+    .axi_aw_injectdbiterr(1'D0),
+    .axi_aw_prog_full_thresh(4'B0),
+    .axi_aw_prog_empty_thresh(4'B0),
+    .axi_aw_data_count(),
+    .axi_aw_wr_data_count(),
+    .axi_aw_rd_data_count(),
+    .axi_aw_sbiterr(),
+    .axi_aw_dbiterr(),
+    .axi_aw_overflow(),
+    .axi_aw_underflow(),
+    .axi_aw_prog_full(),
+    .axi_aw_prog_empty(),
+    .axi_w_injectsbiterr(1'D0),
+    .axi_w_injectdbiterr(1'D0),
+    .axi_w_prog_full_thresh(10'B0),
+    .axi_w_prog_empty_thresh(10'B0),
+    .axi_w_data_count(),
+    .axi_w_wr_data_count(),
+    .axi_w_rd_data_count(),
+    .axi_w_sbiterr(),
+    .axi_w_dbiterr(),
+    .axi_w_overflow(),
+    .axi_w_underflow(),
+    .axi_w_prog_full(),
+    .axi_w_prog_empty(),
+    .axi_b_injectsbiterr(1'D0),
+    .axi_b_injectdbiterr(1'D0),
+    .axi_b_prog_full_thresh(4'B0),
+    .axi_b_prog_empty_thresh(4'B0),
+    .axi_b_data_count(),
+    .axi_b_wr_data_count(),
+    .axi_b_rd_data_count(),
+    .axi_b_sbiterr(),
+    .axi_b_dbiterr(),
+    .axi_b_overflow(),
+    .axi_b_underflow(),
+    .axi_b_prog_full(),
+    .axi_b_prog_empty(),
+    .axi_ar_injectsbiterr(1'D0),
+    .axi_ar_injectdbiterr(1'D0),
+    .axi_ar_prog_full_thresh(4'B0),
+    .axi_ar_prog_empty_thresh(4'B0),
+    .axi_ar_data_count(),
+    .axi_ar_wr_data_count(),
+    .axi_ar_rd_data_count(),
+    .axi_ar_sbiterr(),
+    .axi_ar_dbiterr(),
+    .axi_ar_overflow(),
+    .axi_ar_underflow(),
+    .axi_ar_prog_full(),
+    .axi_ar_prog_empty(),
+    .axi_r_injectsbiterr(1'D0),
+    .axi_r_injectdbiterr(1'D0),
+    .axi_r_prog_full_thresh(10'B0),
+    .axi_r_prog_empty_thresh(10'B0),
+    .axi_r_data_count(),
+    .axi_r_wr_data_count(),
+    .axi_r_rd_data_count(),
+    .axi_r_sbiterr(),
+    .axi_r_dbiterr(),
+    .axi_r_overflow(),
+    .axi_r_underflow(),
+    .axi_r_prog_full(),
+    .axi_r_prog_empty(),
+    .axis_injectsbiterr(1'D0),
+    .axis_injectdbiterr(1'D0),
+    .axis_prog_full_thresh(10'B0),
+    .axis_prog_empty_thresh(10'B0),
+    .axis_data_count(),
+    .axis_wr_data_count(),
+    .axis_rd_data_count(),
+    .axis_sbiterr(),
+    .axis_dbiterr(),
+    .axis_overflow(),
+    .axis_underflow(),
+    .axis_prog_full(),
+    .axis_prog_empty()
+  );
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/fifo_weight_cdc/fifo_weight_cdc.veo

@@ -0,0 +1,75 @@
+// (c) Copyright 1995-2023 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+// DO NOT MODIFY THIS FILE.
+
+// IP VLNV: xilinx.com:ip:fifo_generator:13.2
+// IP Revision: 4
+
+// The following must be inserted into your Verilog file for this
+// core to be instantiated. Change the instance name and port connections
+// (in parentheses) to your own signal names.
+
+//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
+fifo_weight_cdc your_instance_name (
+  .wr_clk(wr_clk),                // input wire wr_clk
+  .wr_rst(wr_rst),                // input wire wr_rst
+  .rd_clk(rd_clk),                // input wire rd_clk
+  .rd_rst(rd_rst),                // input wire rd_rst
+  .din(din),                      // input wire [15 : 0] din
+  .wr_en(wr_en),                  // input wire wr_en
+  .rd_en(rd_en),                  // input wire rd_en
+  .dout(dout),                    // output wire [15 : 0] dout
+  .full(full),                    // output wire full
+  .empty(empty),                  // output wire empty
+  .rd_data_count(rd_data_count)  // output wire [4 : 0] rd_data_count
+);
+// INST_TAG_END ------ End INSTANTIATION Template ---------
+
+// You must compile the wrapper file fifo_weight_cdc.v when simulating
+// the core, fifo_weight_cdc. When compiling the wrapper file, be sure to
+// reference the Verilog simulation library.
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/fifo_weight_cdc/fifo_weight_cdc.vho

@@ -0,0 +1,95 @@
+-- (c) Copyright 1995-2023 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+-- DO NOT MODIFY THIS FILE.
+
+-- IP VLNV: xilinx.com:ip:fifo_generator:13.2
+-- IP Revision: 4
+
+-- The following code must appear in the VHDL architecture header.
+
+------------- Begin Cut here for COMPONENT Declaration ------ COMP_TAG
+COMPONENT fifo_weight_cdc
+  PORT (
+    wr_clk : IN STD_LOGIC;
+    wr_rst : IN STD_LOGIC;
+    rd_clk : IN STD_LOGIC;
+    rd_rst : IN STD_LOGIC;
+    din : IN STD_LOGIC_VECTOR(15 DOWNTO 0);
+    wr_en : IN STD_LOGIC;
+    rd_en : IN STD_LOGIC;
+    dout : OUT STD_LOGIC_VECTOR(15 DOWNTO 0);
+    full : OUT STD_LOGIC;
+    empty : OUT STD_LOGIC;
+    rd_data_count : OUT STD_LOGIC_VECTOR(4 DOWNTO 0)
+  );
+END COMPONENT;
+-- COMP_TAG_END ------ End COMPONENT Declaration ------------
+
+-- The following code must appear in the VHDL architecture
+-- body. Substitute your own instance name and net names.
+
+------------- Begin Cut here for INSTANTIATION Template ----- INST_TAG
+your_instance_name : fifo_weight_cdc
+  PORT MAP (
+    wr_clk => wr_clk,
+    wr_rst => wr_rst,
+    rd_clk => rd_clk,
+    rd_rst => rd_rst,
+    din => din,
+    wr_en => wr_en,
+    rd_en => rd_en,
+    dout => dout,
+    full => full,
+    empty => empty,
+    rd_data_count => rd_data_count
+  );
+-- INST_TAG_END ------ End INSTANTIATION Template ---------
+
+-- You must compile the wrapper file fifo_weight_cdc.vhd when simulating
+-- the core, fifo_weight_cdc. When compiling the wrapper file, be sure to
+-- reference the VHDL simulation library.
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/fifo_weight_cdc/fifo_weight_cdc_stub.v

@@ -0,0 +1,31 @@
+// Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+// --------------------------------------------------------------------------------
+// Tool Version: Vivado v.2019.1.3 (lin64) Build 2644227 Wed Sep  4 09:44:18 MDT 2019
+// Date        : Tue Apr 18 13:12:36 2023
+// Host        : JOSH-ASUS-Z690 running 64-bit Ubuntu 20.04.6 LTS
+// Command     : write_verilog -force -mode synth_stub
+//               /home/josh/Workspace/datalink_814/k7410t/dl814_k7_null_verify/dl814_k7_null_verify.runs/fifo_weight_cdc_synth_1/fifo_weight_cdc_stub.v
+// Design      : fifo_weight_cdc
+// Purpose     : Stub declaration of top-level module interface
+// Device      : xc7k410tffg900-2
+// --------------------------------------------------------------------------------
+
+// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
+// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
+// Please paste the declaration into a Verilog source file or add the file as an additional source.
+(* x_core_info = "fifo_generator_v13_2_4,Vivado 2019.1.3" *)
+module fifo_weight_cdc(wr_clk, wr_rst, rd_clk, rd_rst, din, wr_en, rd_en, 
+  dout, full, empty, rd_data_count)
+/* synthesis syn_black_box black_box_pad_pin="wr_clk,wr_rst,rd_clk,rd_rst,din[15:0],wr_en,rd_en,dout[15:0],full,empty,rd_data_count[4:0]" */;
+  input wr_clk;
+  input wr_rst;
+  input rd_clk;
+  input rd_rst;
+  input [15:0]din;
+  input wr_en;
+  input rd_en;
+  output [15:0]dout;
+  output full;
+  output empty;
+  output [4:0]rd_data_count;
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/fifo_weight_cdc/fifo_weight_cdc_stub.vhdl

@@ -0,0 +1,40 @@
+-- Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+-- --------------------------------------------------------------------------------
+-- Tool Version: Vivado v.2019.1.3 (lin64) Build 2644227 Wed Sep  4 09:44:18 MDT 2019
+-- Date        : Tue Apr 18 13:12:36 2023
+-- Host        : JOSH-ASUS-Z690 running 64-bit Ubuntu 20.04.6 LTS
+-- Command     : write_vhdl -force -mode synth_stub
+--               /home/josh/Workspace/datalink_814/k7410t/dl814_k7_null_verify/dl814_k7_null_verify.runs/fifo_weight_cdc_synth_1/fifo_weight_cdc_stub.vhdl
+-- Design      : fifo_weight_cdc
+-- Purpose     : Stub declaration of top-level module interface
+-- Device      : xc7k410tffg900-2
+-- --------------------------------------------------------------------------------
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity fifo_weight_cdc is
+  Port ( 
+    wr_clk : in STD_LOGIC;
+    wr_rst : in STD_LOGIC;
+    rd_clk : in STD_LOGIC;
+    rd_rst : in STD_LOGIC;
+    din : in STD_LOGIC_VECTOR ( 15 downto 0 );
+    wr_en : in STD_LOGIC;
+    rd_en : in STD_LOGIC;
+    dout : out STD_LOGIC_VECTOR ( 15 downto 0 );
+    full : out STD_LOGIC;
+    empty : out STD_LOGIC;
+    rd_data_count : out STD_LOGIC_VECTOR ( 4 downto 0 )
+  );
+
+end fifo_weight_cdc;
+
+architecture stub of fifo_weight_cdc is
+attribute syn_black_box : boolean;
+attribute black_box_pad_pin : string;
+attribute syn_black_box of stub : architecture is true;
+attribute black_box_pad_pin of stub : architecture is "wr_clk,wr_rst,rd_clk,rd_rst,din[15:0],wr_en,rd_en,dout[15:0],full,empty,rd_data_count[4:0]";
+attribute x_core_info : string;
+attribute x_core_info of stub : architecture is "fifo_generator_v13_2_4,Vivado 2019.1.3";
+begin
+end;

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/fifo_weight_cdc/sim/fifo_weight_cdc.v

@@ -0,0 +1,528 @@
+// (c) Copyright 1995-2023 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+// DO NOT MODIFY THIS FILE.
+
+
+// IP VLNV: xilinx.com:ip:fifo_generator:13.2
+// IP Revision: 4
+
+`timescale 1ns/1ps
+
+(* DowngradeIPIdentifiedWarnings = "yes" *)
+module fifo_weight_cdc (
+  wr_clk,
+  wr_rst,
+  rd_clk,
+  rd_rst,
+  din,
+  wr_en,
+  rd_en,
+  dout,
+  full,
+  empty,
+  rd_data_count
+);
+
+(* X_INTERFACE_PARAMETER = "XIL_INTERFACENAME write_clk, FREQ_HZ 100000000, PHASE 0.000, INSERT_VIP 0" *)
+(* X_INTERFACE_INFO = "xilinx.com:signal:clock:1.0 write_clk CLK" *)
+input wire wr_clk;
+input wire wr_rst;
+(* X_INTERFACE_PARAMETER = "XIL_INTERFACENAME read_clk, FREQ_HZ 100000000, PHASE 0.000, INSERT_VIP 0" *)
+(* X_INTERFACE_INFO = "xilinx.com:signal:clock:1.0 read_clk CLK" *)
+input wire rd_clk;
+input wire rd_rst;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_write:1.0 FIFO_WRITE WR_DATA" *)
+input wire [15 : 0] din;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_write:1.0 FIFO_WRITE WR_EN" *)
+input wire wr_en;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_read:1.0 FIFO_READ RD_EN" *)
+input wire rd_en;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_read:1.0 FIFO_READ RD_DATA" *)
+output wire [15 : 0] dout;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_write:1.0 FIFO_WRITE FULL" *)
+output wire full;
+(* X_INTERFACE_INFO = "xilinx.com:interface:fifo_read:1.0 FIFO_READ EMPTY" *)
+output wire empty;
+output wire [4 : 0] rd_data_count;
+
+  fifo_generator_v13_2_4 #(
+    .C_COMMON_CLOCK(0),
+    .C_SELECT_XPM(0),
+    .C_COUNT_TYPE(0),
+    .C_DATA_COUNT_WIDTH(5),
+    .C_DEFAULT_VALUE("BlankString"),
+    .C_DIN_WIDTH(16),
+    .C_DOUT_RST_VAL("0"),
+    .C_DOUT_WIDTH(16),
+    .C_ENABLE_RLOCS(0),
+    .C_FAMILY("kintex7"),
+    .C_FULL_FLAGS_RST_VAL(1),
+    .C_HAS_ALMOST_EMPTY(0),
+    .C_HAS_ALMOST_FULL(0),
+    .C_HAS_BACKUP(0),
+    .C_HAS_DATA_COUNT(0),
+    .C_HAS_INT_CLK(0),
+    .C_HAS_MEMINIT_FILE(0),
+    .C_HAS_OVERFLOW(0),
+    .C_HAS_RD_DATA_COUNT(1),
+    .C_HAS_RD_RST(0),
+    .C_HAS_RST(1),
+    .C_HAS_SRST(0),
+    .C_HAS_UNDERFLOW(0),
+    .C_HAS_VALID(0),
+    .C_HAS_WR_ACK(0),
+    .C_HAS_WR_DATA_COUNT(0),
+    .C_HAS_WR_RST(0),
+    .C_IMPLEMENTATION_TYPE(2),
+    .C_INIT_WR_PNTR_VAL(0),
+    .C_MEMORY_TYPE(2),
+    .C_MIF_FILE_NAME("BlankString"),
+    .C_OPTIMIZATION_MODE(0),
+    .C_OVERFLOW_LOW(0),
+    .C_PRELOAD_LATENCY(1),
+    .C_PRELOAD_REGS(0),
+    .C_PRIM_FIFO_TYPE("512x36"),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL(2),
+    .C_PROG_EMPTY_THRESH_NEGATE_VAL(3),
+    .C_PROG_EMPTY_TYPE(0),
+    .C_PROG_FULL_THRESH_ASSERT_VAL(29),
+    .C_PROG_FULL_THRESH_NEGATE_VAL(28),
+    .C_PROG_FULL_TYPE(0),
+    .C_RD_DATA_COUNT_WIDTH(5),
+    .C_RD_DEPTH(32),
+    .C_RD_FREQ(1),
+    .C_RD_PNTR_WIDTH(5),
+    .C_UNDERFLOW_LOW(0),
+    .C_USE_DOUT_RST(1),
+    .C_USE_ECC(0),
+    .C_USE_EMBEDDED_REG(0),
+    .C_USE_PIPELINE_REG(0),
+    .C_POWER_SAVING_MODE(0),
+    .C_USE_FIFO16_FLAGS(0),
+    .C_USE_FWFT_DATA_COUNT(0),
+    .C_VALID_LOW(0),
+    .C_WR_ACK_LOW(0),
+    .C_WR_DATA_COUNT_WIDTH(5),
+    .C_WR_DEPTH(32),
+    .C_WR_FREQ(1),
+    .C_WR_PNTR_WIDTH(5),
+    .C_WR_RESPONSE_LATENCY(1),
+    .C_MSGON_VAL(1),
+    .C_ENABLE_RST_SYNC(0),
+    .C_EN_SAFETY_CKT(0),
+    .C_ERROR_INJECTION_TYPE(0),
+    .C_SYNCHRONIZER_STAGE(2),
+    .C_INTERFACE_TYPE(0),
+    .C_AXI_TYPE(1),
+    .C_HAS_AXI_WR_CHANNEL(1),
+    .C_HAS_AXI_RD_CHANNEL(1),
+    .C_HAS_SLAVE_CE(0),
+    .C_HAS_MASTER_CE(0),
+    .C_ADD_NGC_CONSTRAINT(0),
+    .C_USE_COMMON_OVERFLOW(0),
+    .C_USE_COMMON_UNDERFLOW(0),
+    .C_USE_DEFAULT_SETTINGS(0),
+    .C_AXI_ID_WIDTH(1),
+    .C_AXI_ADDR_WIDTH(32),
+    .C_AXI_DATA_WIDTH(64),
+    .C_AXI_LEN_WIDTH(8),
+    .C_AXI_LOCK_WIDTH(1),
+    .C_HAS_AXI_ID(0),
+    .C_HAS_AXI_AWUSER(0),
+    .C_HAS_AXI_WUSER(0),
+    .C_HAS_AXI_BUSER(0),
+    .C_HAS_AXI_ARUSER(0),
+    .C_HAS_AXI_RUSER(0),
+    .C_AXI_ARUSER_WIDTH(1),
+    .C_AXI_AWUSER_WIDTH(1),
+    .C_AXI_WUSER_WIDTH(1),
+    .C_AXI_BUSER_WIDTH(1),
+    .C_AXI_RUSER_WIDTH(1),
+    .C_HAS_AXIS_TDATA(1),
+    .C_HAS_AXIS_TID(0),
+    .C_HAS_AXIS_TDEST(0),
+    .C_HAS_AXIS_TUSER(1),
+    .C_HAS_AXIS_TREADY(1),
+    .C_HAS_AXIS_TLAST(0),
+    .C_HAS_AXIS_TSTRB(0),
+    .C_HAS_AXIS_TKEEP(0),
+    .C_AXIS_TDATA_WIDTH(8),
+    .C_AXIS_TID_WIDTH(1),
+    .C_AXIS_TDEST_WIDTH(1),
+    .C_AXIS_TUSER_WIDTH(4),
+    .C_AXIS_TSTRB_WIDTH(1),
+    .C_AXIS_TKEEP_WIDTH(1),
+    .C_WACH_TYPE(0),
+    .C_WDCH_TYPE(0),
+    .C_WRCH_TYPE(0),
+    .C_RACH_TYPE(0),
+    .C_RDCH_TYPE(0),
+    .C_AXIS_TYPE(0),
+    .C_IMPLEMENTATION_TYPE_WACH(1),
+    .C_IMPLEMENTATION_TYPE_WDCH(1),
+    .C_IMPLEMENTATION_TYPE_WRCH(1),
+    .C_IMPLEMENTATION_TYPE_RACH(1),
+    .C_IMPLEMENTATION_TYPE_RDCH(1),
+    .C_IMPLEMENTATION_TYPE_AXIS(1),
+    .C_APPLICATION_TYPE_WACH(0),
+    .C_APPLICATION_TYPE_WDCH(0),
+    .C_APPLICATION_TYPE_WRCH(0),
+    .C_APPLICATION_TYPE_RACH(0),
+    .C_APPLICATION_TYPE_RDCH(0),
+    .C_APPLICATION_TYPE_AXIS(0),
+    .C_PRIM_FIFO_TYPE_WACH("512x36"),
+    .C_PRIM_FIFO_TYPE_WDCH("1kx36"),
+    .C_PRIM_FIFO_TYPE_WRCH("512x36"),
+    .C_PRIM_FIFO_TYPE_RACH("512x36"),
+    .C_PRIM_FIFO_TYPE_RDCH("1kx36"),
+    .C_PRIM_FIFO_TYPE_AXIS("1kx18"),
+    .C_USE_ECC_WACH(0),
+    .C_USE_ECC_WDCH(0),
+    .C_USE_ECC_WRCH(0),
+    .C_USE_ECC_RACH(0),
+    .C_USE_ECC_RDCH(0),
+    .C_USE_ECC_AXIS(0),
+    .C_ERROR_INJECTION_TYPE_WACH(0),
+    .C_ERROR_INJECTION_TYPE_WDCH(0),
+    .C_ERROR_INJECTION_TYPE_WRCH(0),
+    .C_ERROR_INJECTION_TYPE_RACH(0),
+    .C_ERROR_INJECTION_TYPE_RDCH(0),
+    .C_ERROR_INJECTION_TYPE_AXIS(0),
+    .C_DIN_WIDTH_WACH(1),
+    .C_DIN_WIDTH_WDCH(64),
+    .C_DIN_WIDTH_WRCH(2),
+    .C_DIN_WIDTH_RACH(32),
+    .C_DIN_WIDTH_RDCH(64),
+    .C_DIN_WIDTH_AXIS(1),
+    .C_WR_DEPTH_WACH(16),
+    .C_WR_DEPTH_WDCH(1024),
+    .C_WR_DEPTH_WRCH(16),
+    .C_WR_DEPTH_RACH(16),
+    .C_WR_DEPTH_RDCH(1024),
+    .C_WR_DEPTH_AXIS(1024),
+    .C_WR_PNTR_WIDTH_WACH(4),
+    .C_WR_PNTR_WIDTH_WDCH(10),
+    .C_WR_PNTR_WIDTH_WRCH(4),
+    .C_WR_PNTR_WIDTH_RACH(4),
+    .C_WR_PNTR_WIDTH_RDCH(10),
+    .C_WR_PNTR_WIDTH_AXIS(10),
+    .C_HAS_DATA_COUNTS_WACH(0),
+    .C_HAS_DATA_COUNTS_WDCH(0),
+    .C_HAS_DATA_COUNTS_WRCH(0),
+    .C_HAS_DATA_COUNTS_RACH(0),
+    .C_HAS_DATA_COUNTS_RDCH(0),
+    .C_HAS_DATA_COUNTS_AXIS(0),
+    .C_HAS_PROG_FLAGS_WACH(0),
+    .C_HAS_PROG_FLAGS_WDCH(0),
+    .C_HAS_PROG_FLAGS_WRCH(0),
+    .C_HAS_PROG_FLAGS_RACH(0),
+    .C_HAS_PROG_FLAGS_RDCH(0),
+    .C_HAS_PROG_FLAGS_AXIS(0),
+    .C_PROG_FULL_TYPE_WACH(0),
+    .C_PROG_FULL_TYPE_WDCH(0),
+    .C_PROG_FULL_TYPE_WRCH(0),
+    .C_PROG_FULL_TYPE_RACH(0),
+    .C_PROG_FULL_TYPE_RDCH(0),
+    .C_PROG_FULL_TYPE_AXIS(0),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_WACH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_WDCH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_WRCH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_RACH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_RDCH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_AXIS(1023),
+    .C_PROG_EMPTY_TYPE_WACH(0),
+    .C_PROG_EMPTY_TYPE_WDCH(0),
+    .C_PROG_EMPTY_TYPE_WRCH(0),
+    .C_PROG_EMPTY_TYPE_RACH(0),
+    .C_PROG_EMPTY_TYPE_RDCH(0),
+    .C_PROG_EMPTY_TYPE_AXIS(0),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_WACH(1022),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_WDCH(1022),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_WRCH(1022),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_RACH(1022),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_RDCH(1022),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_AXIS(1022),
+    .C_REG_SLICE_MODE_WACH(0),
+    .C_REG_SLICE_MODE_WDCH(0),
+    .C_REG_SLICE_MODE_WRCH(0),
+    .C_REG_SLICE_MODE_RACH(0),
+    .C_REG_SLICE_MODE_RDCH(0),
+    .C_REG_SLICE_MODE_AXIS(0)
+  ) inst (
+    .backup(1'D0),
+    .backup_marker(1'D0),
+    .clk(1'D0),
+    .rst(1'D0),
+    .srst(1'D0),
+    .wr_clk(wr_clk),
+    .wr_rst(wr_rst),
+    .rd_clk(rd_clk),
+    .rd_rst(rd_rst),
+    .din(din),
+    .wr_en(wr_en),
+    .rd_en(rd_en),
+    .prog_empty_thresh(5'B0),
+    .prog_empty_thresh_assert(5'B0),
+    .prog_empty_thresh_negate(5'B0),
+    .prog_full_thresh(5'B0),
+    .prog_full_thresh_assert(5'B0),
+    .prog_full_thresh_negate(5'B0),
+    .int_clk(1'D0),
+    .injectdbiterr(1'D0),
+    .injectsbiterr(1'D0),
+    .sleep(1'D0),
+    .dout(dout),
+    .full(full),
+    .almost_full(),
+    .wr_ack(),
+    .overflow(),
+    .empty(empty),
+    .almost_empty(),
+    .valid(),
+    .underflow(),
+    .data_count(),
+    .rd_data_count(rd_data_count),
+    .wr_data_count(),
+    .prog_full(),
+    .prog_empty(),
+    .sbiterr(),
+    .dbiterr(),
+    .wr_rst_busy(),
+    .rd_rst_busy(),
+    .m_aclk(1'D0),
+    .s_aclk(1'D0),
+    .s_aresetn(1'D0),
+    .m_aclk_en(1'D0),
+    .s_aclk_en(1'D0),
+    .s_axi_awid(1'B0),
+    .s_axi_awaddr(32'B0),
+    .s_axi_awlen(8'B0),
+    .s_axi_awsize(3'B0),
+    .s_axi_awburst(2'B0),
+    .s_axi_awlock(1'B0),
+    .s_axi_awcache(4'B0),
+    .s_axi_awprot(3'B0),
+    .s_axi_awqos(4'B0),
+    .s_axi_awregion(4'B0),
+    .s_axi_awuser(1'B0),
+    .s_axi_awvalid(1'D0),
+    .s_axi_awready(),
+    .s_axi_wid(1'B0),
+    .s_axi_wdata(64'B0),
+    .s_axi_wstrb(8'B0),
+    .s_axi_wlast(1'D0),
+    .s_axi_wuser(1'B0),
+    .s_axi_wvalid(1'D0),
+    .s_axi_wready(),
+    .s_axi_bid(),
+    .s_axi_bresp(),
+    .s_axi_buser(),
+    .s_axi_bvalid(),
+    .s_axi_bready(1'D0),
+    .m_axi_awid(),
+    .m_axi_awaddr(),
+    .m_axi_awlen(),
+    .m_axi_awsize(),
+    .m_axi_awburst(),
+    .m_axi_awlock(),
+    .m_axi_awcache(),
+    .m_axi_awprot(),
+    .m_axi_awqos(),
+    .m_axi_awregion(),
+    .m_axi_awuser(),
+    .m_axi_awvalid(),
+    .m_axi_awready(1'D0),
+    .m_axi_wid(),
+    .m_axi_wdata(),
+    .m_axi_wstrb(),
+    .m_axi_wlast(),
+    .m_axi_wuser(),
+    .m_axi_wvalid(),
+    .m_axi_wready(1'D0),
+    .m_axi_bid(1'B0),
+    .m_axi_bresp(2'B0),
+    .m_axi_buser(1'B0),
+    .m_axi_bvalid(1'D0),
+    .m_axi_bready(),
+    .s_axi_arid(1'B0),
+    .s_axi_araddr(32'B0),
+    .s_axi_arlen(8'B0),
+    .s_axi_arsize(3'B0),
+    .s_axi_arburst(2'B0),
+    .s_axi_arlock(1'B0),
+    .s_axi_arcache(4'B0),
+    .s_axi_arprot(3'B0),
+    .s_axi_arqos(4'B0),
+    .s_axi_arregion(4'B0),
+    .s_axi_aruser(1'B0),
+    .s_axi_arvalid(1'D0),
+    .s_axi_arready(),
+    .s_axi_rid(),
+    .s_axi_rdata(),
+    .s_axi_rresp(),
+    .s_axi_rlast(),
+    .s_axi_ruser(),
+    .s_axi_rvalid(),
+    .s_axi_rready(1'D0),
+    .m_axi_arid(),
+    .m_axi_araddr(),
+    .m_axi_arlen(),
+    .m_axi_arsize(),
+    .m_axi_arburst(),
+    .m_axi_arlock(),
+    .m_axi_arcache(),
+    .m_axi_arprot(),
+    .m_axi_arqos(),
+    .m_axi_arregion(),
+    .m_axi_aruser(),
+    .m_axi_arvalid(),
+    .m_axi_arready(1'D0),
+    .m_axi_rid(1'B0),
+    .m_axi_rdata(64'B0),
+    .m_axi_rresp(2'B0),
+    .m_axi_rlast(1'D0),
+    .m_axi_ruser(1'B0),
+    .m_axi_rvalid(1'D0),
+    .m_axi_rready(),
+    .s_axis_tvalid(1'D0),
+    .s_axis_tready(),
+    .s_axis_tdata(8'B0),
+    .s_axis_tstrb(1'B0),
+    .s_axis_tkeep(1'B0),
+    .s_axis_tlast(1'D0),
+    .s_axis_tid(1'B0),
+    .s_axis_tdest(1'B0),
+    .s_axis_tuser(4'B0),
+    .m_axis_tvalid(),
+    .m_axis_tready(1'D0),
+    .m_axis_tdata(),
+    .m_axis_tstrb(),
+    .m_axis_tkeep(),
+    .m_axis_tlast(),
+    .m_axis_tid(),
+    .m_axis_tdest(),
+    .m_axis_tuser(),
+    .axi_aw_injectsbiterr(1'D0),
+    .axi_aw_injectdbiterr(1'D0),
+    .axi_aw_prog_full_thresh(4'B0),
+    .axi_aw_prog_empty_thresh(4'B0),
+    .axi_aw_data_count(),
+    .axi_aw_wr_data_count(),
+    .axi_aw_rd_data_count(),
+    .axi_aw_sbiterr(),
+    .axi_aw_dbiterr(),
+    .axi_aw_overflow(),
+    .axi_aw_underflow(),
+    .axi_aw_prog_full(),
+    .axi_aw_prog_empty(),
+    .axi_w_injectsbiterr(1'D0),
+    .axi_w_injectdbiterr(1'D0),
+    .axi_w_prog_full_thresh(10'B0),
+    .axi_w_prog_empty_thresh(10'B0),
+    .axi_w_data_count(),
+    .axi_w_wr_data_count(),
+    .axi_w_rd_data_count(),
+    .axi_w_sbiterr(),
+    .axi_w_dbiterr(),
+    .axi_w_overflow(),
+    .axi_w_underflow(),
+    .axi_w_prog_full(),
+    .axi_w_prog_empty(),
+    .axi_b_injectsbiterr(1'D0),
+    .axi_b_injectdbiterr(1'D0),
+    .axi_b_prog_full_thresh(4'B0),
+    .axi_b_prog_empty_thresh(4'B0),
+    .axi_b_data_count(),
+    .axi_b_wr_data_count(),
+    .axi_b_rd_data_count(),
+    .axi_b_sbiterr(),
+    .axi_b_dbiterr(),
+    .axi_b_overflow(),
+    .axi_b_underflow(),
+    .axi_b_prog_full(),
+    .axi_b_prog_empty(),
+    .axi_ar_injectsbiterr(1'D0),
+    .axi_ar_injectdbiterr(1'D0),
+    .axi_ar_prog_full_thresh(4'B0),
+    .axi_ar_prog_empty_thresh(4'B0),
+    .axi_ar_data_count(),
+    .axi_ar_wr_data_count(),
+    .axi_ar_rd_data_count(),
+    .axi_ar_sbiterr(),
+    .axi_ar_dbiterr(),
+    .axi_ar_overflow(),
+    .axi_ar_underflow(),
+    .axi_ar_prog_full(),
+    .axi_ar_prog_empty(),
+    .axi_r_injectsbiterr(1'D0),
+    .axi_r_injectdbiterr(1'D0),
+    .axi_r_prog_full_thresh(10'B0),
+    .axi_r_prog_empty_thresh(10'B0),
+    .axi_r_data_count(),
+    .axi_r_wr_data_count(),
+    .axi_r_rd_data_count(),
+    .axi_r_sbiterr(),
+    .axi_r_dbiterr(),
+    .axi_r_overflow(),
+    .axi_r_underflow(),
+    .axi_r_prog_full(),
+    .axi_r_prog_empty(),
+    .axis_injectsbiterr(1'D0),
+    .axis_injectdbiterr(1'D0),
+    .axis_prog_full_thresh(10'B0),
+    .axis_prog_empty_thresh(10'B0),
+    .axis_data_count(),
+    .axis_wr_data_count(),
+    .axis_rd_data_count(),
+    .axis_sbiterr(),
+    .axis_dbiterr(),
+    .axis_overflow(),
+    .axis_underflow(),
+    .axis_prog_full(),
+    .axis_prog_empty()
+  );
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ila_ant_interface/ila_ant_interface.veo

@@ -0,0 +1,73 @@
+// (c) Copyright 1995-2012 Xilinx, Inc. All rights reserved.
+//
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+//
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+//
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+//
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+//
+// DO NOT MODIFY THIS FILE.
+
+
+// The following must be inserted into your Verilog file for this
+// core to be instantiated. Change the instance name and port connections
+// (in parentheses) to your own signal names.
+
+//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
+
+ila_ant_interface your_instance_name (
+	.clk(clk), // input wire clk
+
+
+	.probe0(probe0), // input wire [0:0]  probe0  
+	.probe1(probe1), // input wire [0:0]  probe1 
+	.probe2(probe2), // input wire [0:0]  probe2 
+	.probe3(probe3), // input wire [0:0]  probe3 
+	.probe4(probe4) // input wire [0:0]  probe4
+);
+
+// INST_TAG_END ------ End INSTANTIATION Template ---------
+
+// You must compile the wrapper file ila_ant_interface when simulating
+// the core, ila_ant_interface. When compiling the wrapper file, be sure to
+// reference the Verilog simulation library.
+
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ila_ant_interface/ila_ant_interface_stub.v

@@ -0,0 +1,25 @@
+// Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+// --------------------------------------------------------------------------------
+// Tool Version: Vivado v.2019.1.3 (lin64) Build 2644227 Wed Sep  4 09:44:18 MDT 2019
+// Date        : Tue Apr 18 17:23:02 2023
+// Host        : JOSH-ASUS-Z690 running 64-bit Ubuntu 20.04.6 LTS
+// Command     : write_verilog -force -mode synth_stub
+//               /home/josh/Workspace/datalink_814/k7410t/dl814_k7_null_verify/dl814_k7_null_verify.runs/ila_ant_interface_synth_1/ila_ant_interface_stub.v
+// Design      : ila_ant_interface
+// Purpose     : Stub declaration of top-level module interface
+// Device      : xc7k410tffg900-2
+// --------------------------------------------------------------------------------
+
+// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
+// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
+// Please paste the declaration into a Verilog source file or add the file as an additional source.
+(* X_CORE_INFO = "ila,Vivado 2019.1.3" *)
+module ila_ant_interface(clk, probe0, probe1, probe2, probe3, probe4)
+/* synthesis syn_black_box black_box_pad_pin="clk,probe0[0:0],probe1[0:0],probe2[0:0],probe3[0:0],probe4[0:0]" */;
+  input clk;
+  input [0:0]probe0;
+  input [0:0]probe1;
+  input [0:0]probe2;
+  input [0:0]probe3;
+  input [0:0]probe4;
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ila_ant_interface/ila_ant_interface_stub.vhdl

@@ -0,0 +1,35 @@
+-- Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+-- --------------------------------------------------------------------------------
+-- Tool Version: Vivado v.2019.1.3 (lin64) Build 2644227 Wed Sep  4 09:44:18 MDT 2019
+-- Date        : Tue Apr 18 17:23:02 2023
+-- Host        : JOSH-ASUS-Z690 running 64-bit Ubuntu 20.04.6 LTS
+-- Command     : write_vhdl -force -mode synth_stub
+--               /home/josh/Workspace/datalink_814/k7410t/dl814_k7_null_verify/dl814_k7_null_verify.runs/ila_ant_interface_synth_1/ila_ant_interface_stub.vhdl
+-- Design      : ila_ant_interface
+-- Purpose     : Stub declaration of top-level module interface
+-- Device      : xc7k410tffg900-2
+-- --------------------------------------------------------------------------------
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity ila_ant_interface is
+  Port ( 
+    clk : in STD_LOGIC;
+    probe0 : in STD_LOGIC_VECTOR ( 0 to 0 );
+    probe1 : in STD_LOGIC_VECTOR ( 0 to 0 );
+    probe2 : in STD_LOGIC_VECTOR ( 0 to 0 );
+    probe3 : in STD_LOGIC_VECTOR ( 0 to 0 );
+    probe4 : in STD_LOGIC_VECTOR ( 0 to 0 )
+  );
+
+end ila_ant_interface;
+
+architecture stub of ila_ant_interface is
+attribute syn_black_box : boolean;
+attribute black_box_pad_pin : string;
+attribute syn_black_box of stub : architecture is true;
+attribute black_box_pad_pin of stub : architecture is "clk,probe0[0:0],probe1[0:0],probe2[0:0],probe3[0:0],probe4[0:0]";
+attribute X_CORE_INFO : string;
+attribute X_CORE_INFO of stub : architecture is "ila,Vivado 2019.1.3";
+begin
+end;

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ila_ant_interface/sim/ila_ant_interface.v

@@ -0,0 +1,70 @@
+// (c) Copyright 1995-2012 Xilinx, Inc. All rights reserved.
+//
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+//
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+//
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+//
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+//
+// DO NOT MODIFY THIS FILE.
+`timescale 1ns / 1ps
+module ila_ant_interface (
+clk,
+
+
+probe0,
+probe1,
+probe2,
+probe3,
+probe4
+);
+
+input clk;
+
+
+input [0 : 0] probe0;
+input [0 : 0] probe1;
+input [0 : 0] probe2;
+input [0 : 0] probe3;
+input [0 : 0] probe4;
+
+
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ila_rx_pre/ila_rx_pre.veo

@@ -0,0 +1,72 @@
+// (c) Copyright 1995-2012 Xilinx, Inc. All rights reserved.
+//
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+//
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+//
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+//
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+//
+// DO NOT MODIFY THIS FILE.
+
+
+// The following must be inserted into your Verilog file for this
+// core to be instantiated. Change the instance name and port connections
+// (in parentheses) to your own signal names.
+
+//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
+
+ila_rx_pre your_instance_name (
+	.clk(clk), // input wire clk
+
+
+	.probe0(probe0), // input wire [0:0]  probe0  
+	.probe1(probe1), // input wire [0:0]  probe1 
+	.probe2(probe2), // input wire [0:0]  probe2 
+	.probe3(probe3) // input wire [0:0]  probe3
+);
+
+// INST_TAG_END ------ End INSTANTIATION Template ---------
+
+// You must compile the wrapper file ila_rx_pre when simulating
+// the core, ila_rx_pre. When compiling the wrapper file, be sure to
+// reference the Verilog simulation library.
+
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ila_rx_pre/ila_rx_pre_stub.v

@@ -0,0 +1,24 @@
+// Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+// --------------------------------------------------------------------------------
+// Tool Version: Vivado v.2019.1.3 (lin64) Build 2644227 Wed Sep  4 09:44:18 MDT 2019
+// Date        : Tue Apr 18 13:09:49 2023
+// Host        : JOSH-ASUS-Z690 running 64-bit Ubuntu 20.04.6 LTS
+// Command     : write_verilog -force -mode synth_stub
+//               /home/josh/Workspace/datalink_814/k7410t/dl814_k7_null_verify/dl814_k7_null_verify.runs/ila_rx_pre_synth_1/ila_rx_pre_stub.v
+// Design      : ila_rx_pre
+// Purpose     : Stub declaration of top-level module interface
+// Device      : xc7k410tffg900-2
+// --------------------------------------------------------------------------------
+
+// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
+// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
+// Please paste the declaration into a Verilog source file or add the file as an additional source.
+(* X_CORE_INFO = "ila,Vivado 2019.1.3" *)
+module ila_rx_pre(clk, probe0, probe1, probe2, probe3)
+/* synthesis syn_black_box black_box_pad_pin="clk,probe0[0:0],probe1[0:0],probe2[0:0],probe3[0:0]" */;
+  input clk;
+  input [0:0]probe0;
+  input [0:0]probe1;
+  input [0:0]probe2;
+  input [0:0]probe3;
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ila_rx_pre/ila_rx_pre_stub.vhdl

@@ -0,0 +1,34 @@
+-- Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+-- --------------------------------------------------------------------------------
+-- Tool Version: Vivado v.2019.1.3 (lin64) Build 2644227 Wed Sep  4 09:44:18 MDT 2019
+-- Date        : Tue Apr 18 13:09:49 2023
+-- Host        : JOSH-ASUS-Z690 running 64-bit Ubuntu 20.04.6 LTS
+-- Command     : write_vhdl -force -mode synth_stub
+--               /home/josh/Workspace/datalink_814/k7410t/dl814_k7_null_verify/dl814_k7_null_verify.runs/ila_rx_pre_synth_1/ila_rx_pre_stub.vhdl
+-- Design      : ila_rx_pre
+-- Purpose     : Stub declaration of top-level module interface
+-- Device      : xc7k410tffg900-2
+-- --------------------------------------------------------------------------------
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity ila_rx_pre is
+  Port ( 
+    clk : in STD_LOGIC;
+    probe0 : in STD_LOGIC_VECTOR ( 0 to 0 );
+    probe1 : in STD_LOGIC_VECTOR ( 0 to 0 );
+    probe2 : in STD_LOGIC_VECTOR ( 0 to 0 );
+    probe3 : in STD_LOGIC_VECTOR ( 0 to 0 )
+  );
+
+end ila_rx_pre;
+
+architecture stub of ila_rx_pre is
+attribute syn_black_box : boolean;
+attribute black_box_pad_pin : string;
+attribute syn_black_box of stub : architecture is true;
+attribute black_box_pad_pin of stub : architecture is "clk,probe0[0:0],probe1[0:0],probe2[0:0],probe3[0:0]";
+attribute X_CORE_INFO : string;
+attribute X_CORE_INFO of stub : architecture is "ila,Vivado 2019.1.3";
+begin
+end;

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/ila_rx_pre/sim/ila_rx_pre.v

@@ -0,0 +1,68 @@
+// (c) Copyright 1995-2012 Xilinx, Inc. All rights reserved.
+//
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+//
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+//
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+//
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+//
+// DO NOT MODIFY THIS FILE.
+`timescale 1ns / 1ps
+module ila_rx_pre (
+clk,
+
+
+probe0,
+probe1,
+probe2,
+probe3
+);
+
+input clk;
+
+
+input [0 : 0] probe0;
+input [0 : 0] probe1;
+input [0 : 0] probe2;
+input [0 : 0] probe3;
+
+
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/rom_hop_data/rom_hop_data.veo

@@ -0,0 +1,67 @@
+// (c) Copyright 1995-2023 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+// DO NOT MODIFY THIS FILE.
+
+// IP VLNV: xilinx.com:ip:blk_mem_gen:8.4
+// IP Revision: 3
+
+// The following must be inserted into your Verilog file for this
+// core to be instantiated. Change the instance name and port connections
+// (in parentheses) to your own signal names.
+
+//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
+rom_hop_data your_instance_name (
+  .clka(clka),    // input wire clka
+  .addra(addra),  // input wire [13 : 0] addra
+  .douta(douta)  // output wire [95 : 0] douta
+);
+// INST_TAG_END ------ End INSTANTIATION Template ---------
+
+// You must compile the wrapper file rom_hop_data.v when simulating
+// the core, rom_hop_data. When compiling the wrapper file, be sure to
+// reference the Verilog simulation library.
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/rom_hop_data/rom_hop_data.vho

@@ -0,0 +1,79 @@
+-- (c) Copyright 1995-2023 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+-- DO NOT MODIFY THIS FILE.
+
+-- IP VLNV: xilinx.com:ip:blk_mem_gen:8.4
+-- IP Revision: 3
+
+-- The following code must appear in the VHDL architecture header.
+
+------------- Begin Cut here for COMPONENT Declaration ------ COMP_TAG
+COMPONENT rom_hop_data
+  PORT (
+    clka : IN STD_LOGIC;
+    addra : IN STD_LOGIC_VECTOR(13 DOWNTO 0);
+    douta : OUT STD_LOGIC_VECTOR(95 DOWNTO 0)
+  );
+END COMPONENT;
+-- COMP_TAG_END ------ End COMPONENT Declaration ------------
+
+-- The following code must appear in the VHDL architecture
+-- body. Substitute your own instance name and net names.
+
+------------- Begin Cut here for INSTANTIATION Template ----- INST_TAG
+your_instance_name : rom_hop_data
+  PORT MAP (
+    clka => clka,
+    addra => addra,
+    douta => douta
+  );
+-- INST_TAG_END ------ End INSTANTIATION Template ---------
+
+-- You must compile the wrapper file rom_hop_data.vhd when simulating
+-- the core, rom_hop_data. When compiling the wrapper file, be sure to
+-- reference the VHDL simulation library.
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/rom_hop_data/rom_hop_data_stub.v

@@ -0,0 +1,22 @@
+// Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+// --------------------------------------------------------------------------------
+// Tool Version: Vivado v.2019.1.3 (lin64) Build 2644227 Wed Sep  4 09:44:18 MDT 2019
+// Date        : Thu Apr 20 11:02:32 2023
+// Host        : JOSH-ASUS-Z690 running 64-bit Ubuntu 20.04.6 LTS
+// Command     : write_verilog -force -mode synth_stub
+//               /home/josh/Workspace/vivado-git/projects/dl814_k7/dl814_k7_null_verify/ip/managed_ip_project/managed_ip_project.runs/rom_hop_data_synth_1/rom_hop_data_stub.v
+// Design      : rom_hop_data
+// Purpose     : Stub declaration of top-level module interface
+// Device      : xc7k410tffg900-2
+// --------------------------------------------------------------------------------
+
+// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
+// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
+// Please paste the declaration into a Verilog source file or add the file as an additional source.
+(* x_core_info = "blk_mem_gen_v8_4_3,Vivado 2019.1.3" *)
+module rom_hop_data(clka, addra, douta)
+/* synthesis syn_black_box black_box_pad_pin="clka,addra[13:0],douta[95:0]" */;
+  input clka;
+  input [13:0]addra;
+  output [95:0]douta;
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/rom_hop_data/rom_hop_data_stub.vhdl

@@ -0,0 +1,32 @@
+-- Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+-- --------------------------------------------------------------------------------
+-- Tool Version: Vivado v.2019.1.3 (lin64) Build 2644227 Wed Sep  4 09:44:18 MDT 2019
+-- Date        : Thu Apr 20 11:02:32 2023
+-- Host        : JOSH-ASUS-Z690 running 64-bit Ubuntu 20.04.6 LTS
+-- Command     : write_vhdl -force -mode synth_stub
+--               /home/josh/Workspace/vivado-git/projects/dl814_k7/dl814_k7_null_verify/ip/managed_ip_project/managed_ip_project.runs/rom_hop_data_synth_1/rom_hop_data_stub.vhdl
+-- Design      : rom_hop_data
+-- Purpose     : Stub declaration of top-level module interface
+-- Device      : xc7k410tffg900-2
+-- --------------------------------------------------------------------------------
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity rom_hop_data is
+  Port ( 
+    clka : in STD_LOGIC;
+    addra : in STD_LOGIC_VECTOR ( 13 downto 0 );
+    douta : out STD_LOGIC_VECTOR ( 95 downto 0 )
+  );
+
+end rom_hop_data;
+
+architecture stub of rom_hop_data is
+attribute syn_black_box : boolean;
+attribute black_box_pad_pin : string;
+attribute syn_black_box of stub : architecture is true;
+attribute black_box_pad_pin of stub : architecture is "clka,addra[13:0],douta[95:0]";
+attribute x_core_info : string;
+attribute x_core_info of stub : architecture is "blk_mem_gen_v8_4_3,Vivado 2019.1.3";
+begin
+end;

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/rom_hop_data/sim/rom_hop_data.v

@@ -0,0 +1,211 @@
+// (c) Copyright 1995-2023 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+// DO NOT MODIFY THIS FILE.
+
+
+// IP VLNV: xilinx.com:ip:blk_mem_gen:8.4
+// IP Revision: 3
+
+`timescale 1ns/1ps
+
+(* DowngradeIPIdentifiedWarnings = "yes" *)
+module rom_hop_data (
+  clka,
+  addra,
+  douta
+);
+
+(* X_INTERFACE_INFO = "xilinx.com:interface:bram:1.0 BRAM_PORTA CLK" *)
+input wire clka;
+(* X_INTERFACE_INFO = "xilinx.com:interface:bram:1.0 BRAM_PORTA ADDR" *)
+input wire [13 : 0] addra;
+(* X_INTERFACE_PARAMETER = "XIL_INTERFACENAME BRAM_PORTA, MEM_SIZE 8192, MEM_WIDTH 32, MEM_ECC NONE, MASTER_TYPE OTHER, READ_LATENCY 1" *)
+(* X_INTERFACE_INFO = "xilinx.com:interface:bram:1.0 BRAM_PORTA DOUT" *)
+output wire [95 : 0] douta;
+
+  blk_mem_gen_v8_4_3 #(
+    .C_FAMILY("kintex7"),
+    .C_XDEVICEFAMILY("kintex7"),
+    .C_ELABORATION_DIR("./"),
+    .C_INTERFACE_TYPE(0),
+    .C_AXI_TYPE(1),
+    .C_AXI_SLAVE_TYPE(0),
+    .C_USE_BRAM_BLOCK(0),
+    .C_ENABLE_32BIT_ADDRESS(0),
+    .C_CTRL_ECC_ALGO("NONE"),
+    .C_HAS_AXI_ID(0),
+    .C_AXI_ID_WIDTH(4),
+    .C_MEM_TYPE(3),
+    .C_BYTE_SIZE(9),
+    .C_ALGORITHM(1),
+    .C_PRIM_TYPE(1),
+    .C_LOAD_INIT_FILE(1),
+    .C_INIT_FILE_NAME("rom_hop_data.mif"),
+    .C_INIT_FILE("rom_hop_data.mem"),
+    .C_USE_DEFAULT_DATA(0),
+    .C_DEFAULT_DATA("0"),
+    .C_HAS_RSTA(0),
+    .C_RST_PRIORITY_A("CE"),
+    .C_RSTRAM_A(0),
+    .C_INITA_VAL("0"),
+    .C_HAS_ENA(0),
+    .C_HAS_REGCEA(0),
+    .C_USE_BYTE_WEA(0),
+    .C_WEA_WIDTH(1),
+    .C_WRITE_MODE_A("WRITE_FIRST"),
+    .C_WRITE_WIDTH_A(96),
+    .C_READ_WIDTH_A(96),
+    .C_WRITE_DEPTH_A(9600),
+    .C_READ_DEPTH_A(9600),
+    .C_ADDRA_WIDTH(14),
+    .C_HAS_RSTB(0),
+    .C_RST_PRIORITY_B("CE"),
+    .C_RSTRAM_B(0),
+    .C_INITB_VAL("0"),
+    .C_HAS_ENB(0),
+    .C_HAS_REGCEB(0),
+    .C_USE_BYTE_WEB(0),
+    .C_WEB_WIDTH(1),
+    .C_WRITE_MODE_B("WRITE_FIRST"),
+    .C_WRITE_WIDTH_B(96),
+    .C_READ_WIDTH_B(96),
+    .C_WRITE_DEPTH_B(9600),
+    .C_READ_DEPTH_B(9600),
+    .C_ADDRB_WIDTH(14),
+    .C_HAS_MEM_OUTPUT_REGS_A(0),
+    .C_HAS_MEM_OUTPUT_REGS_B(0),
+    .C_HAS_MUX_OUTPUT_REGS_A(0),
+    .C_HAS_MUX_OUTPUT_REGS_B(0),
+    .C_MUX_PIPELINE_STAGES(0),
+    .C_HAS_SOFTECC_INPUT_REGS_A(0),
+    .C_HAS_SOFTECC_OUTPUT_REGS_B(0),
+    .C_USE_SOFTECC(0),
+    .C_USE_ECC(0),
+    .C_EN_ECC_PIPE(0),
+    .C_READ_LATENCY_A(1),
+    .C_READ_LATENCY_B(1),
+    .C_HAS_INJECTERR(0),
+    .C_SIM_COLLISION_CHECK("ALL"),
+    .C_COMMON_CLK(0),
+    .C_DISABLE_WARN_BHV_COLL(0),
+    .C_EN_SLEEP_PIN(0),
+    .C_USE_URAM(0),
+    .C_EN_RDADDRA_CHG(0),
+    .C_EN_RDADDRB_CHG(0),
+    .C_EN_DEEPSLEEP_PIN(0),
+    .C_EN_SHUTDOWN_PIN(0),
+    .C_EN_SAFETY_CKT(0),
+    .C_DISABLE_WARN_BHV_RANGE(0),
+    .C_COUNT_36K_BRAM("26"),
+    .C_COUNT_18K_BRAM("1"),
+    .C_EST_POWER_SUMMARY("Estimated Power for IP     :     23.399606 mW")
+  ) inst (
+    .clka(clka),
+    .rsta(1'D0),
+    .ena(1'D0),
+    .regcea(1'D0),
+    .wea(1'B0),
+    .addra(addra),
+    .dina(96'B0),
+    .douta(douta),
+    .clkb(1'D0),
+    .rstb(1'D0),
+    .enb(1'D0),
+    .regceb(1'D0),
+    .web(1'B0),
+    .addrb(14'B0),
+    .dinb(96'B0),
+    .doutb(),
+    .injectsbiterr(1'D0),
+    .injectdbiterr(1'D0),
+    .eccpipece(1'D0),
+    .sbiterr(),
+    .dbiterr(),
+    .rdaddrecc(),
+    .sleep(1'D0),
+    .deepsleep(1'D0),
+    .shutdown(1'D0),
+    .rsta_busy(),
+    .rstb_busy(),
+    .s_aclk(1'H0),
+    .s_aresetn(1'D0),
+    .s_axi_awid(4'B0),
+    .s_axi_awaddr(32'B0),
+    .s_axi_awlen(8'B0),
+    .s_axi_awsize(3'B0),
+    .s_axi_awburst(2'B0),
+    .s_axi_awvalid(1'D0),
+    .s_axi_awready(),
+    .s_axi_wdata(96'B0),
+    .s_axi_wstrb(1'B0),
+    .s_axi_wlast(1'D0),
+    .s_axi_wvalid(1'D0),
+    .s_axi_wready(),
+    .s_axi_bid(),
+    .s_axi_bresp(),
+    .s_axi_bvalid(),
+    .s_axi_bready(1'D0),
+    .s_axi_arid(4'B0),
+    .s_axi_araddr(32'B0),
+    .s_axi_arlen(8'B0),
+    .s_axi_arsize(3'B0),
+    .s_axi_arburst(2'B0),
+    .s_axi_arvalid(1'D0),
+    .s_axi_arready(),
+    .s_axi_rid(),
+    .s_axi_rdata(),
+    .s_axi_rresp(),
+    .s_axi_rlast(),
+    .s_axi_rvalid(),
+    .s_axi_rready(1'D0),
+    .s_axi_injectsbiterr(1'D0),
+    .s_axi_injectdbiterr(1'D0),
+    .s_axi_sbiterr(),
+    .s_axi_dbiterr(),
+    .s_axi_rdaddrecc()
+  );
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/sys_clk_gen/sys_clk_gen.v

@@ -0,0 +1,86 @@
+
+// file: sys_clk_gen.v
+// 
+// (c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+//----------------------------------------------------------------------------
+// User entered comments
+//----------------------------------------------------------------------------
+// None
+//
+//----------------------------------------------------------------------------
+//  Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase
+//   Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)
+//----------------------------------------------------------------------------
+// clk_out1____48.000______0.000______50.0______248.815____233.292
+//
+//----------------------------------------------------------------------------
+// Input Clock   Freq (MHz)    Input Jitter (UI)
+//----------------------------------------------------------------------------
+// __primary______________25____________0.010
+
+`timescale 1ps/1ps
+
+(* CORE_GENERATION_INFO = "sys_clk_gen,clk_wiz_v6_0_3_0_0,{component_name=sys_clk_gen,use_phase_alignment=true,use_min_o_jitter=false,use_max_i_jitter=false,use_dyn_phase_shift=false,use_inclk_switchover=false,use_dyn_reconfig=false,enable_axi=0,feedback_source=FDBK_AUTO,PRIMITIVE=MMCM,num_out_clk=1,clkin1_period=40.000,clkin2_period=10.0,use_power_down=false,use_reset=false,use_locked=false,use_inclk_stopped=false,feedback_type=SINGLE,CLOCK_MGR_TYPE=NA,manual_override=false}" *)
+
+module sys_clk_gen 
+ (
+  // Clock out ports
+  output        clk_out1,
+ // Clock in ports
+  input         clk_in1
+ );
+
+  sys_clk_gen_clk_wiz inst
+  (
+  // Clock out ports  
+  .clk_out1(clk_out1),
+ // Clock in ports
+  .clk_in1(clk_in1)
+  );
+
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/sys_clk_gen/sys_clk_gen.veo

@@ -0,0 +1,77 @@
+
+// 
+// (c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+//----------------------------------------------------------------------------
+// User entered comments
+//----------------------------------------------------------------------------
+// None
+//
+//----------------------------------------------------------------------------
+//  Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase
+//   Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)
+//----------------------------------------------------------------------------
+// clk_out1____48.000______0.000______50.0______248.815____233.292
+//
+//----------------------------------------------------------------------------
+// Input Clock   Freq (MHz)    Input Jitter (UI)
+//----------------------------------------------------------------------------
+// __primary______________25____________0.010
+
+// The following must be inserted into your Verilog file for this
+// core to be instantiated. Change the instance name and port connections
+// (in parentheses) to your own signal names.
+
+//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
+
+  sys_clk_gen instance_name
+   (
+    // Clock out ports
+    .clk_out1(clk_out1),     // output clk_out1
+   // Clock in ports
+    .clk_in1(clk_in1));      // input clk_in1
+// INST_TAG_END ------ End INSTANTIATION Template ---------

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/sys_clk_gen/sys_clk_gen_clk_wiz.v

@@ -0,0 +1,198 @@
+
+// file: sys_clk_gen.v
+// 
+// (c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved.
+// 
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+// 
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+// 
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+// 
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+// 
+//----------------------------------------------------------------------------
+// User entered comments
+//----------------------------------------------------------------------------
+// None
+//
+//----------------------------------------------------------------------------
+//  Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase
+//   Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)
+//----------------------------------------------------------------------------
+// clk_out1____48.000______0.000______50.0______248.815____233.292
+//
+//----------------------------------------------------------------------------
+// Input Clock   Freq (MHz)    Input Jitter (UI)
+//----------------------------------------------------------------------------
+// __primary______________25____________0.010
+
+`timescale 1ps/1ps
+
+module sys_clk_gen_clk_wiz 
+
+ (// Clock in ports
+  // Clock out ports
+  output        clk_out1,
+  input         clk_in1
+ );
+  // Input buffering
+  //------------------------------------
+wire clk_in1_sys_clk_gen;
+wire clk_in2_sys_clk_gen;
+  IBUF clkin1_ibufg
+   (.O (clk_in1_sys_clk_gen),
+    .I (clk_in1));
+
+
+
+
+  // Clocking PRIMITIVE
+  //------------------------------------
+
+  // Instantiation of the MMCM PRIMITIVE
+  //    * Unused inputs are tied off
+  //    * Unused outputs are labeled unused
+
+  wire        clk_out1_sys_clk_gen;
+  wire        clk_out2_sys_clk_gen;
+  wire        clk_out3_sys_clk_gen;
+  wire        clk_out4_sys_clk_gen;
+  wire        clk_out5_sys_clk_gen;
+  wire        clk_out6_sys_clk_gen;
+  wire        clk_out7_sys_clk_gen;
+
+  wire [15:0] do_unused;
+  wire        drdy_unused;
+  wire        psdone_unused;
+  wire        locked_int;
+  wire        clkfbout_sys_clk_gen;
+  wire        clkfbout_buf_sys_clk_gen;
+  wire        clkfboutb_unused;
+    wire clkout0b_unused;
+   wire clkout1_unused;
+   wire clkout1b_unused;
+   wire clkout2_unused;
+   wire clkout2b_unused;
+   wire clkout3_unused;
+   wire clkout3b_unused;
+   wire clkout4_unused;
+  wire        clkout5_unused;
+  wire        clkout6_unused;
+  wire        clkfbstopped_unused;
+  wire        clkinstopped_unused;
+
+  MMCME2_ADV
+  #(.BANDWIDTH            ("OPTIMIZED"),
+    .CLKOUT4_CASCADE      ("FALSE"),
+    .COMPENSATION         ("ZHOLD"),
+    .STARTUP_WAIT         ("FALSE"),
+    .DIVCLK_DIVIDE        (1),
+    .CLKFBOUT_MULT_F      (42.000),
+    .CLKFBOUT_PHASE       (0.000),
+    .CLKFBOUT_USE_FINE_PS ("FALSE"),
+    .CLKOUT0_DIVIDE_F     (21.875),
+    .CLKOUT0_PHASE        (0.000),
+    .CLKOUT0_DUTY_CYCLE   (0.500),
+    .CLKOUT0_USE_FINE_PS  ("FALSE"),
+    .CLKIN1_PERIOD        (40.000))
+  mmcm_adv_inst
+    // Output clocks
+   (
+    .CLKFBOUT            (clkfbout_sys_clk_gen),
+    .CLKFBOUTB           (clkfboutb_unused),
+    .CLKOUT0             (clk_out1_sys_clk_gen),
+    .CLKOUT0B            (clkout0b_unused),
+    .CLKOUT1             (clkout1_unused),
+    .CLKOUT1B            (clkout1b_unused),
+    .CLKOUT2             (clkout2_unused),
+    .CLKOUT2B            (clkout2b_unused),
+    .CLKOUT3             (clkout3_unused),
+    .CLKOUT3B            (clkout3b_unused),
+    .CLKOUT4             (clkout4_unused),
+    .CLKOUT5             (clkout5_unused),
+    .CLKOUT6             (clkout6_unused),
+     // Input clock control
+    .CLKFBIN             (clkfbout_buf_sys_clk_gen),
+    .CLKIN1              (clk_in1_sys_clk_gen),
+    .CLKIN2              (1'b0),
+     // Tied to always select the primary input clock
+    .CLKINSEL            (1'b1),
+    // Ports for dynamic reconfiguration
+    .DADDR               (7'h0),
+    .DCLK                (1'b0),
+    .DEN                 (1'b0),
+    .DI                  (16'h0),
+    .DO                  (do_unused),
+    .DRDY                (drdy_unused),
+    .DWE                 (1'b0),
+    // Ports for dynamic phase shift
+    .PSCLK               (1'b0),
+    .PSEN                (1'b0),
+    .PSINCDEC            (1'b0),
+    .PSDONE              (psdone_unused),
+    // Other control and status signals
+    .LOCKED              (locked_int),
+    .CLKINSTOPPED        (clkinstopped_unused),
+    .CLKFBSTOPPED        (clkfbstopped_unused),
+    .PWRDWN              (1'b0),
+    .RST                 (1'b0));
+
+// Clock Monitor clock assigning
+//--------------------------------------
+ // Output buffering
+  //-----------------------------------
+
+  BUFG clkf_buf
+   (.O (clkfbout_buf_sys_clk_gen),
+    .I (clkfbout_sys_clk_gen));
+
+
+
+
+
+
+  BUFG clkout1_buf
+   (.O   (clk_out1),
+    .I   (clk_out1_sys_clk_gen));
+
+
+
+
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/sys_clk_gen/sys_clk_gen_stub.v

@@ -0,0 +1,20 @@
+// Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+// --------------------------------------------------------------------------------
+// Tool Version: Vivado v.2019.1.3 (win64) Build 2644227 Wed Sep  4 09:45:24 MDT 2019
+// Date        : Thu Dec  1 20:23:32 2022
+// Host        : Gatsby-Hasee running 64-bit major release  (build 9200)
+// Command     : write_verilog -force -mode synth_stub
+//               D:/Workspace/datalink_814/dl814_k7_null_verify/dl814_k7_null_verify.runs/sys_clk_gen_synth_1/sys_clk_gen_stub.v
+// Design      : sys_clk_gen
+// Purpose     : Stub declaration of top-level module interface
+// Device      : xc7k410tffg900-2
+// --------------------------------------------------------------------------------
+
+// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
+// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
+// Please paste the declaration into a Verilog source file or add the file as an additional source.
+module sys_clk_gen(clk_out1, clk_in1)
+/* synthesis syn_black_box black_box_pad_pin="clk_out1,clk_in1" */;
+  output clk_out1;
+  input clk_in1;
+endmodule

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/ip/sys_clk_gen/sys_clk_gen_stub.vhdl

@@ -0,0 +1,29 @@
+-- Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+-- --------------------------------------------------------------------------------
+-- Tool Version: Vivado v.2019.1.3 (win64) Build 2644227 Wed Sep  4 09:45:24 MDT 2019
+-- Date        : Thu Dec  1 20:23:32 2022
+-- Host        : Gatsby-Hasee running 64-bit major release  (build 9200)
+-- Command     : write_vhdl -force -mode synth_stub
+--               D:/Workspace/datalink_814/dl814_k7_null_verify/dl814_k7_null_verify.runs/sys_clk_gen_synth_1/sys_clk_gen_stub.vhdl
+-- Design      : sys_clk_gen
+-- Purpose     : Stub declaration of top-level module interface
+-- Device      : xc7k410tffg900-2
+-- --------------------------------------------------------------------------------
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity sys_clk_gen is
+  Port ( 
+    clk_out1 : out STD_LOGIC;
+    clk_in1 : in STD_LOGIC
+  );
+
+end sys_clk_gen;
+
+architecture stub of sys_clk_gen is
+attribute syn_black_box : boolean;
+attribute black_box_pad_pin : string;
+attribute syn_black_box of stub : architecture is true;
+attribute black_box_pad_pin of stub : architecture is "clk_out1,clk_in1";
+begin
+end;

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/README.txt

@@ -0,0 +1,83 @@
+################################################################################
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# README.txt: Please read the sections below to understand the steps required
+#             to simulate the design for a simulator, the directory structure
+#             and the generated exported files.
+#
+################################################################################
+
+1. Simulate Design
+
+To simulate design, cd to the simulator directory and execute the script.
+
+For example:-
+
+% cd questa
+% ./top.sh
+
+The export simulation flow requires the Xilinx pre-compiled simulation library
+components for the target simulator. These components are referred using the
+'-lib_map_path' switch. If this switch is specified, then the export simulation
+will automatically set this library path in the generated script and update,
+copy the simulator setup file(s) in the exported directory.
+
+If '-lib_map_path' is not specified, then the pre-compiled simulation library
+information will not be included in the exported scripts and that may cause
+simulation errors when running this script. Alternatively, you can provide the
+library information using this switch while executing the generated script.
+
+For example:-
+
+% ./top.sh -lib_map_path /design/questa/clibs
+
+Please refer to the generated script header 'Prerequisite' section for more details.
+
+2. Directory Structure
+
+By default, if the -directory switch is not specified, export_simulation will
+create the following directory structure:-
+
+<current_working_directory>/export_sim/<simulator>
+
+For example, if the current working directory is /tmp/test, export_simulation
+will create the following directory path:-
+
+/tmp/test/export_sim/questa
+
+If -directory switch is specified, export_simulation will create a simulator
+sub-directory under the specified directory path.
+
+For example, 'export_simulation -directory /tmp/test/my_test_area/func_sim'
+command will create the following directory:-
+
+/tmp/test/my_test_area/func_sim/questa
+
+By default, if -simulator is not specified, export_simulation will create a
+simulator sub-directory for each simulator and export the files for each simulator
+in this sub-directory respectively.
+
+IMPORTANT: Please note that the simulation library path must be specified manually
+in the generated script for the respective simulator. Please refer to the generated
+script header 'Prerequisite' section for more details.
+
+3. Exported script and files
+
+Export simulation will create the driver shell script, setup files and copy the
+design sources in the output directory path.
+
+By default, when the -script_name switch is not specified, export_simulation will
+create the following script name:-
+
+<simulation_top>.sh  (Unix)
+When exporting the files for an IP using the -of_objects switch, export_simulation
+will create the following script name:-
+
+<ip-name>.sh  (Unix)
+Export simulation will create the setup files for the target simulator specified
+with the -simulator switch.
+
+For example, if the target simulator is "ies", export_simulation will create the
+'cds.lib', 'hdl.var' and design library diectories and mappings in the 'cds.lib'
+file.
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/activehdl/README.txt

@@ -0,0 +1,49 @@
+################################################################################
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# README.txt: Please read the sections below to understand the steps required to
+#             run the exported script and information about the source files.
+#
+# Generated by export_simulation on Thu Apr 20 11:01:01 CST 2023
+#
+################################################################################
+
+1. How to run the generated simulation script:-
+
+From the shell prompt in the current directory, issue the following command:-
+
+./ad9361_clk_gen.sh
+
+This command will launch the 'compile', 'elaborate' and 'simulate' functions
+implemented in the script file for the 3-step flow. These functions are called
+from the main 'run' function in the script file.
+
+The 'run' function first executes the 'setup' function, the purpose of which is to
+create simulator specific setup files, create design library mappings and library
+directories and copy 'glbl.v' from the Vivado software install location into the
+current directory.
+
+The 'setup' function is also used for removing the simulator generated data in
+order to reset the current directory to the original state when export_simulation
+was launched from Vivado. This generated data can be removed by specifying the
+'-reset_run' switch to the './ad9361_clk_gen.sh' script.
+
+./ad9361_clk_gen.sh -reset_run
+
+To keep the generated data from the previous run but regenerate the setup files and
+library directories, use the '-noclean_files' switch.
+
+./ad9361_clk_gen.sh -noclean_files
+
+For more information on the script, please type './ad9361_clk_gen.sh -help'.
+
+2. Additional design information files:-
+
+export_simulation generates following additional file that can be used for fetching
+the design files information or for integrating with external custom scripts.
+
+Name   : file_info.txt
+Purpose: This file contains detail design file information based on the compile order
+         when export_simulation was executed from Vivado. The file contains information
+         about the file type, name, whether it is part of the IP, associated library
+         and the file path information.

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/activehdl/ad9361_clk_gen.sh

@@ -0,0 +1,152 @@
+#!/bin/bash -f
+#*********************************************************************************************************
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# Filename    : ad9361_clk_gen.sh
+# Simulator   : Aldec Active-HDL Simulator
+# Description : Simulation script for compiling, elaborating and verifying the project source files.
+#               The script will automatically create the design libraries sub-directories in the run
+#               directory, add the library logical mappings in the simulator setup file, create default
+#               'do/prj' file, execute compilation, elaboration and simulation steps.
+#
+# Generated by Vivado on Thu Apr 20 11:01:01 CST 2023
+# SW Build 2644227 on Wed Sep  4 09:44:18 MDT 2019
+#
+# Copyright 1986-2019 Xilinx, Inc. All Rights Reserved. 
+#
+# usage: ad9361_clk_gen.sh [-help]
+# usage: ad9361_clk_gen.sh [-lib_map_path]
+# usage: ad9361_clk_gen.sh [-noclean_files]
+# usage: ad9361_clk_gen.sh [-reset_run]
+#
+# Prerequisite:- To compile and run simulation, you must compile the Xilinx simulation libraries using the
+# 'compile_simlib' TCL command. For more information about this command, run 'compile_simlib -help' in the
+# Vivado Tcl Shell. Once the libraries have been compiled successfully, specify the -lib_map_path switch
+# that points to these libraries and rerun export_simulation. For more information about this switch please
+# type 'export_simulation -help' in the Tcl shell.
+#
+# You can also point to the simulation libraries by either replacing the <SPECIFY_COMPILED_LIB_PATH> in this
+# script with the compiled library directory path or specify this path with the '-lib_map_path' switch when
+# executing this script. Please type 'ad9361_clk_gen.sh -help' for more information.
+#
+# Additional references - 'Xilinx Vivado Design Suite User Guide:Logic simulation (UG900)'
+#
+#*********************************************************************************************************
+
+
+# Script info
+echo -e "ad9361_clk_gen.sh - Script generated by export_simulation (Vivado v2019.1.3 (64-bit)-id)\n"
+
+# Main steps
+run()
+{
+  check_args $# $1
+  setup $1 $2
+  compile
+  simulate
+}
+
+# RUN_STEP: <compile>
+compile()
+{
+  # Compile design files
+  source compile.do 2>&1 | tee -a compile.log
+
+}
+
+# RUN_STEP: <simulate>
+simulate()
+{
+  runvsimsa -l simulate.log -do "do {simulate.do}"
+}
+
+# STEP: setup
+setup()
+{
+  case $1 in
+    "-lib_map_path" )
+      if [[ ($2 == "") ]]; then
+        echo -e "ERROR: Simulation library directory path not specified (type \"./ad9361_clk_gen.sh -help\" for more information)\n"
+        exit 1
+      fi
+     map_setup_file $2
+    ;;
+    "-reset_run" )
+      reset_run
+      echo -e "INFO: Simulation run files deleted.\n"
+      exit 0
+    ;;
+    "-noclean_files" )
+      # do not remove previous data
+    ;;
+    * )
+     map_setup_file $2
+  esac
+
+  # Add any setup/initialization commands here:-
+
+  # <user specific commands>
+
+}
+
+# Map library.cfg file
+map_setup_file()
+{
+  file="library.cfg"
+  lib_map_path=""
+  if [[ ($1 != "") ]]; then
+    lib_map_path="$1"
+  fi
+  if [[ ($lib_map_path != "") ]]; then
+    src_file="$lib_map_path/$file"
+    if [[ -e $src_file ]]; then
+      vmap -link $lib_map_path
+    fi
+  fi
+}
+
+# Delete generated data from the previous run
+reset_run()
+{
+  files_to_remove=(compile.log elaboration.log simulate.log dataset.asdb work activehdl)
+  for (( i=0; i<${#files_to_remove[*]}; i++ )); do
+    file="${files_to_remove[i]}"
+    if [[ -e $file ]]; then
+      rm -rf $file
+    fi
+  done
+}
+
+# Check command line arguments
+check_args()
+{
+  if [[ ($1 == 1 ) && ($2 != "-lib_map_path" && $2 != "-noclean_files" && $2 != "-reset_run" && $2 != "-help" && $2 != "-h") ]]; then
+    echo -e "ERROR: Unknown option specified '$2' (type \"./ad9361_clk_gen.sh -help\" for more information)\n"
+    exit 1
+  fi
+
+  if [[ ($2 == "-help" || $2 == "-h") ]]; then
+    usage
+  fi
+}
+
+# Script usage
+usage()
+{
+  msg="Usage: ad9361_clk_gen.sh [-help]\n\
+Usage: ad9361_clk_gen.sh [-lib_map_path]\n\
+Usage: ad9361_clk_gen.sh [-reset_run]\n\
+Usage: ad9361_clk_gen.sh [-noclean_files]\n\n\
+[-help] -- Print help information for this script\n\n\
+[-lib_map_path <path>] -- Compiled simulation library directory path. The simulation library is compiled\n\
+using the compile_simlib tcl command. Please see 'compile_simlib -help' for more information.\n\n\
+[-reset_run] -- Recreate simulator setup files and library mappings for a clean run. The generated files\n\
+from the previous run will be removed. If you don't want to remove the simulator generated files, use the\n\
+-noclean_files switch.\n\n\
+[-noclean_files] -- Reset previous run, but do not remove simulator generated files from the previous run.\n\n"
+  echo -e $msg
+  exit 1
+}
+
+# Launch script
+run $1 $2

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/activehdl/compile.do

@@ -0,0 +1,23 @@
+vlib work
+vlib activehdl
+
+vlib activehdl/xil_defaultlib
+vlib activehdl/xpm
+
+vmap xil_defaultlib activehdl/xil_defaultlib
+vmap xpm activehdl/xpm
+
+vlog -work xil_defaultlib  -sv2k12 "+incdir+../../../ipstatic" \
+"/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_cdc/hdl/xpm_cdc.sv" \
+"/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_memory/hdl/xpm_memory.sv" \
+
+vcom -work xpm -93 \
+"/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_VCOMP.vhd" \
+
+vlog -work xil_defaultlib  -v2k5 "+incdir+../../../ipstatic" \
+"../../../ip/ad9361_clk_gen/ad9361_clk_gen_clk_wiz.v" \
+"../../../ip/ad9361_clk_gen/ad9361_clk_gen.v" \
+
+vlog -work xil_defaultlib \
+"glbl.v"
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/activehdl/file_info.txt

@@ -0,0 +1,6 @@
+xpm_cdc.sv,systemverilog,xil_defaultlib,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_cdc/hdl/xpm_cdc.sv,incdir="../../../ipstatic"incdir="../../../ipstatic"
+xpm_memory.sv,systemverilog,xil_defaultlib,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_memory/hdl/xpm_memory.sv,incdir="../../../ipstatic"incdir="../../../ipstatic"
+xpm_VCOMP.vhd,vhdl,xpm,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_VCOMP.vhd,incdir="../../../ipstatic"incdir="../../../ipstatic"
+ad9361_clk_gen_clk_wiz.v,verilog,xil_defaultlib,../../../ip/ad9361_clk_gen/ad9361_clk_gen_clk_wiz.v,incdir="../../../ipstatic"incdir="../../../ipstatic"
+ad9361_clk_gen.v,verilog,xil_defaultlib,../../../ip/ad9361_clk_gen/ad9361_clk_gen.v,incdir="../../../ipstatic"incdir="../../../ipstatic"
+glbl.v,Verilog,xil_defaultlib,glbl.v

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/activehdl/glbl.v

@@ -0,0 +1,71 @@
+// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
+`ifndef GLBL
+`define GLBL
+`timescale  1 ps / 1 ps
+
+module glbl ();
+
+    parameter ROC_WIDTH = 100000;
+    parameter TOC_WIDTH = 0;
+
+//--------   STARTUP Globals --------------
+    wire GSR;
+    wire GTS;
+    wire GWE;
+    wire PRLD;
+    tri1 p_up_tmp;
+    tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
+
+    wire PROGB_GLBL;
+    wire CCLKO_GLBL;
+    wire FCSBO_GLBL;
+    wire [3:0] DO_GLBL;
+    wire [3:0] DI_GLBL;
+   
+    reg GSR_int;
+    reg GTS_int;
+    reg PRLD_int;
+
+//--------   JTAG Globals --------------
+    wire JTAG_TDO_GLBL;
+    wire JTAG_TCK_GLBL;
+    wire JTAG_TDI_GLBL;
+    wire JTAG_TMS_GLBL;
+    wire JTAG_TRST_GLBL;
+
+    reg JTAG_CAPTURE_GLBL;
+    reg JTAG_RESET_GLBL;
+    reg JTAG_SHIFT_GLBL;
+    reg JTAG_UPDATE_GLBL;
+    reg JTAG_RUNTEST_GLBL;
+
+    reg JTAG_SEL1_GLBL = 0;
+    reg JTAG_SEL2_GLBL = 0 ;
+    reg JTAG_SEL3_GLBL = 0;
+    reg JTAG_SEL4_GLBL = 0;
+
+    reg JTAG_USER_TDO1_GLBL = 1'bz;
+    reg JTAG_USER_TDO2_GLBL = 1'bz;
+    reg JTAG_USER_TDO3_GLBL = 1'bz;
+    reg JTAG_USER_TDO4_GLBL = 1'bz;
+
+    assign (strong1, weak0) GSR = GSR_int;
+    assign (strong1, weak0) GTS = GTS_int;
+    assign (weak1, weak0) PRLD = PRLD_int;
+
+    initial begin
+	GSR_int = 1'b1;
+	PRLD_int = 1'b1;
+	#(ROC_WIDTH)
+	GSR_int = 1'b0;
+	PRLD_int = 1'b0;
+    end
+
+    initial begin
+	GTS_int = 1'b1;
+	#(TOC_WIDTH)
+	GTS_int = 1'b0;
+    end
+
+endmodule
+`endif

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/activehdl/simulate.do

@@ -0,0 +1,17 @@
+onbreak {quit -force}
+onerror {quit -force}
+
+asim -t 1ps +access +r +m+ad9361_clk_gen -L xil_defaultlib -L xpm -L unisims_ver -L unimacro_ver -L secureip -O5 xil_defaultlib.ad9361_clk_gen xil_defaultlib.glbl
+
+do {wave.do}
+
+view wave
+view structure
+
+do {ad9361_clk_gen.udo}
+
+run -all
+
+endsim
+
+quit -force

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/activehdl/wave.do

@@ -0,0 +1,2 @@
+add wave *
+add wave /glbl/GSR

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/ies/README.txt

@@ -0,0 +1,48 @@
+################################################################################
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# README.txt: Please read the sections below to understand the steps required to
+#             run the exported script and information about the source files.
+#
+# Generated by export_simulation on Thu Apr 20 11:01:01 CST 2023
+#
+################################################################################
+
+1. How to run the generated simulation script:-
+
+From the shell prompt in the current directory, issue the following command:-
+
+./ad9361_clk_gen.sh
+
+This command will launch the 'execute' function for the single-step flow. This
+function is called from the main 'run' function in the script file.
+
+The 'run' function first executes the 'setup' function, the purpose of which is to
+create simulator specific setup files, create design library mappings and library
+directories and copy 'glbl.v' from the Vivado software install location into the
+current directory.
+
+The 'setup' function is also used for removing the simulator generated data in
+order to reset the current directory to the original state when export_simulation
+was launched from Vivado. This generated data can be removed by specifying the
+'-reset_run' switch to the './ad9361_clk_gen.sh' script.
+
+./ad9361_clk_gen.sh -reset_run
+
+To keep the generated data from the previous run but regenerate the setup files and
+library directories, use the '-noclean_files' switch.
+
+./ad9361_clk_gen.sh -noclean_files
+
+For more information on the script, please type './ad9361_clk_gen.sh -help'.
+
+2. Additional design information files:-
+
+export_simulation generates following additional file that can be used for fetching
+the design files information or for integrating with external custom scripts.
+
+Name   : file_info.txt
+Purpose: This file contains detail design file information based on the compile order
+         when export_simulation was executed from Vivado. The file contains information
+         about the file type, name, whether it is part of the IP, associated library
+         and the file path information.

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/ies/ad9361_clk_gen.sh

@@ -0,0 +1,177 @@
+#!/bin/bash -f
+#*********************************************************************************************************
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# Filename    : ad9361_clk_gen.sh
+# Simulator   : Cadence Incisive Enterprise Simulator
+# Description : Simulation script for compiling, elaborating and verifying the project source files.
+#               The script will automatically create the design libraries sub-directories in the run
+#               directory, add the library logical mappings in the simulator setup file, create default
+#               'do/prj' file, execute compilation, elaboration and simulation steps.
+#
+# Generated by Vivado on Thu Apr 20 11:01:01 CST 2023
+# SW Build 2644227 on Wed Sep  4 09:44:18 MDT 2019
+#
+# Copyright 1986-2019 Xilinx, Inc. All Rights Reserved. 
+#
+# usage: ad9361_clk_gen.sh [-help]
+# usage: ad9361_clk_gen.sh [-lib_map_path]
+# usage: ad9361_clk_gen.sh [-noclean_files]
+# usage: ad9361_clk_gen.sh [-reset_run]
+#
+# Prerequisite:- To compile and run simulation, you must compile the Xilinx simulation libraries using the
+# 'compile_simlib' TCL command. For more information about this command, run 'compile_simlib -help' in the
+# Vivado Tcl Shell. Once the libraries have been compiled successfully, specify the -lib_map_path switch
+# that points to these libraries and rerun export_simulation. For more information about this switch please
+# type 'export_simulation -help' in the Tcl shell.
+#
+# You can also point to the simulation libraries by either replacing the <SPECIFY_COMPILED_LIB_PATH> in this
+# script with the compiled library directory path or specify this path with the '-lib_map_path' switch when
+# executing this script. Please type 'ad9361_clk_gen.sh -help' for more information.
+#
+# Additional references - 'Xilinx Vivado Design Suite User Guide:Logic simulation (UG900)'
+#
+#*********************************************************************************************************
+
+# Directory path for design sources and include directories (if any) wrt this path
+ref_dir="."
+
+# Override directory with 'export_sim_ref_dir' env path value if set in the shell
+if [[ (! -z "$export_sim_ref_dir") && ($export_sim_ref_dir != "") ]]; then
+  ref_dir="$export_sim_ref_dir"
+fi
+
+# Set the compiled library directory
+ref_lib_dir="."
+
+# Command line options
+irun_opts="-64bit -v93 -relax -access +rwc -namemap_mixgen"
+
+# Design libraries
+design_libs=(xil_defaultlib xpm)
+
+# Simulation root library directory
+sim_lib_dir="ies_lib"
+
+# Script info
+echo -e "ad9361_clk_gen.sh - Script generated by export_simulation (Vivado v2019.1.3 (64-bit)-id)\n"
+
+# Main steps
+run()
+{
+  check_args $# $1
+  setup $1 $2
+  execute
+}
+
+# RUN_STEP: <execute>
+execute()
+{
+  irun $irun_opts \
+       -reflib "$ref_lib_dir/unisim:unisim" \
+       -reflib "$ref_lib_dir/unisims_ver:unisims_ver" \
+       -reflib "$ref_lib_dir/secureip:secureip" \
+       -reflib "$ref_lib_dir/unimacro:unimacro" \
+       -reflib "$ref_lib_dir/unimacro_ver:unimacro_ver" \
+       -top xil_defaultlib.ad9361_clk_gen \
+       -f run.f \
+       -top glbl \
+       glbl.v \
+       +incdir+"$ref_dir/../../../ipstatic" \
+       +incdir+"../../../ipstatic"
+}
+
+# STEP: setup
+setup()
+{
+  case $1 in
+    "-lib_map_path" )
+      if [[ ($2 == "") ]]; then
+        echo -e "ERROR: Simulation library directory path not specified (type \"./ad9361_clk_gen.sh -help\" for more information)\n"
+        exit 1
+      else
+        ref_lib_dir=$2
+      fi
+    ;;
+    "-reset_run" )
+      reset_run
+      echo -e "INFO: Simulation run files deleted.\n"
+      exit 0
+    ;;
+    "-noclean_files" )
+      # do not remove previous data
+    ;;
+    * )
+  esac
+
+  create_lib_dir
+
+  # Add any setup/initialization commands here:-
+
+  # <user specific commands>
+
+}
+
+# Create design library directory paths
+create_lib_dir()
+{
+  if [[ -e $sim_lib_dir ]]; then
+    rm -rf $sim_lib_dir
+  fi
+
+  for (( i=0; i<${#design_libs[*]}; i++ )); do
+    lib="${design_libs[i]}"
+    lib_dir="$sim_lib_dir/$lib"
+    if [[ ! -e $lib_dir ]]; then
+      mkdir -p $lib_dir
+    fi
+  done
+}
+
+# Delete generated data from the previous run
+reset_run()
+{
+  files_to_remove=(ncsim.key irun.key irun.log waves.shm irun.history .simvision INCA_libs)
+  for (( i=0; i<${#files_to_remove[*]}; i++ )); do
+    file="${files_to_remove[i]}"
+    if [[ -e $file ]]; then
+      rm -rf $file
+    fi
+  done
+
+  create_lib_dir
+}
+
+# Check command line arguments
+check_args()
+{
+  if [[ ($1 == 1 ) && ($2 != "-lib_map_path" && $2 != "-noclean_files" && $2 != "-reset_run" && $2 != "-help" && $2 != "-h") ]]; then
+    echo -e "ERROR: Unknown option specified '$2' (type \"./ad9361_clk_gen.sh -help\" for more information)\n"
+    exit 1
+  fi
+
+  if [[ ($2 == "-help" || $2 == "-h") ]]; then
+    usage
+  fi
+}
+
+# Script usage
+usage()
+{
+  msg="Usage: ad9361_clk_gen.sh [-help]\n\
+Usage: ad9361_clk_gen.sh [-lib_map_path]\n\
+Usage: ad9361_clk_gen.sh [-reset_run]\n\
+Usage: ad9361_clk_gen.sh [-noclean_files]\n\n\
+[-help] -- Print help information for this script\n\n\
+[-lib_map_path <path>] -- Compiled simulation library directory path. The simulation library is compiled\n\
+using the compile_simlib tcl command. Please see 'compile_simlib -help' for more information.\n\n\
+[-reset_run] -- Recreate simulator setup files and library mappings for a clean run. The generated files\n\
+from the previous run will be removed. If you don't want to remove the simulator generated files, use the\n\
+-noclean_files switch.\n\n\
+[-noclean_files] -- Reset previous run, but do not remove simulator generated files from the previous run.\n\n"
+  echo -e $msg
+  exit 1
+}
+
+# Launch script
+run $1 $2

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/ies/file_info.txt

@@ -0,0 +1,6 @@
+xpm_cdc.sv,systemverilog,xil_defaultlib,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_cdc/hdl/xpm_cdc.sv,incdir="$ref_dir/../../../ipstatic"incdir="../../../ipstatic"
+xpm_memory.sv,systemverilog,xil_defaultlib,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_memory/hdl/xpm_memory.sv,incdir="$ref_dir/../../../ipstatic"incdir="../../../ipstatic"
+xpm_VCOMP.vhd,vhdl,xpm,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_VCOMP.vhd,incdir="$ref_dir/../../../ipstatic"incdir="../../../ipstatic"
+ad9361_clk_gen_clk_wiz.v,verilog,xil_defaultlib,../../../ip/ad9361_clk_gen/ad9361_clk_gen_clk_wiz.v,incdir="$ref_dir/../../../ipstatic"incdir="../../../ipstatic"
+ad9361_clk_gen.v,verilog,xil_defaultlib,../../../ip/ad9361_clk_gen/ad9361_clk_gen.v,incdir="$ref_dir/../../../ipstatic"incdir="../../../ipstatic"
+glbl.v,Verilog,xil_defaultlib,glbl.v

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/ies/glbl.v

@@ -0,0 +1,71 @@
+// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
+`ifndef GLBL
+`define GLBL
+`timescale  1 ps / 1 ps
+
+module glbl ();
+
+    parameter ROC_WIDTH = 100000;
+    parameter TOC_WIDTH = 0;
+
+//--------   STARTUP Globals --------------
+    wire GSR;
+    wire GTS;
+    wire GWE;
+    wire PRLD;
+    tri1 p_up_tmp;
+    tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
+
+    wire PROGB_GLBL;
+    wire CCLKO_GLBL;
+    wire FCSBO_GLBL;
+    wire [3:0] DO_GLBL;
+    wire [3:0] DI_GLBL;
+   
+    reg GSR_int;
+    reg GTS_int;
+    reg PRLD_int;
+
+//--------   JTAG Globals --------------
+    wire JTAG_TDO_GLBL;
+    wire JTAG_TCK_GLBL;
+    wire JTAG_TDI_GLBL;
+    wire JTAG_TMS_GLBL;
+    wire JTAG_TRST_GLBL;
+
+    reg JTAG_CAPTURE_GLBL;
+    reg JTAG_RESET_GLBL;
+    reg JTAG_SHIFT_GLBL;
+    reg JTAG_UPDATE_GLBL;
+    reg JTAG_RUNTEST_GLBL;
+
+    reg JTAG_SEL1_GLBL = 0;
+    reg JTAG_SEL2_GLBL = 0 ;
+    reg JTAG_SEL3_GLBL = 0;
+    reg JTAG_SEL4_GLBL = 0;
+
+    reg JTAG_USER_TDO1_GLBL = 1'bz;
+    reg JTAG_USER_TDO2_GLBL = 1'bz;
+    reg JTAG_USER_TDO3_GLBL = 1'bz;
+    reg JTAG_USER_TDO4_GLBL = 1'bz;
+
+    assign (strong1, weak0) GSR = GSR_int;
+    assign (strong1, weak0) GTS = GTS_int;
+    assign (weak1, weak0) PRLD = PRLD_int;
+
+    initial begin
+	GSR_int = 1'b1;
+	PRLD_int = 1'b1;
+	#(ROC_WIDTH)
+	GSR_int = 1'b0;
+	PRLD_int = 1'b0;
+    end
+
+    initial begin
+	GTS_int = 1'b1;
+	#(TOC_WIDTH)
+	GTS_int = 1'b0;
+    end
+
+endmodule
+`endif

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/ies/run.f

@@ -0,0 +1,15 @@
+-makelib ies_lib/xil_defaultlib -sv \
+  "/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_cdc/hdl/xpm_cdc.sv" \
+  "/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_memory/hdl/xpm_memory.sv" \
+-endlib
+-makelib ies_lib/xpm \
+  "/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_VCOMP.vhd" \
+-endlib
+-makelib ies_lib/xil_defaultlib \
+  "../../../ip/ad9361_clk_gen/ad9361_clk_gen_clk_wiz.v" \
+  "../../../ip/ad9361_clk_gen/ad9361_clk_gen.v" \
+-endlib
+-makelib ies_lib/xil_defaultlib \
+  glbl.v
+-endlib
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/modelsim/README.txt

@@ -0,0 +1,49 @@
+################################################################################
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# README.txt: Please read the sections below to understand the steps required to
+#             run the exported script and information about the source files.
+#
+# Generated by export_simulation on Thu Apr 20 11:01:01 CST 2023
+#
+################################################################################
+
+1. How to run the generated simulation script:-
+
+From the shell prompt in the current directory, issue the following command:-
+
+./ad9361_clk_gen.sh
+
+This command will launch the 'compile', 'elaborate' and 'simulate' functions
+implemented in the script file for the 3-step flow. These functions are called
+from the main 'run' function in the script file.
+
+The 'run' function first executes the 'setup' function, the purpose of which is to
+create simulator specific setup files, create design library mappings and library
+directories and copy 'glbl.v' from the Vivado software install location into the
+current directory.
+
+The 'setup' function is also used for removing the simulator generated data in
+order to reset the current directory to the original state when export_simulation
+was launched from Vivado. This generated data can be removed by specifying the
+'-reset_run' switch to the './ad9361_clk_gen.sh' script.
+
+./ad9361_clk_gen.sh -reset_run
+
+To keep the generated data from the previous run but regenerate the setup files and
+library directories, use the '-noclean_files' switch.
+
+./ad9361_clk_gen.sh -noclean_files
+
+For more information on the script, please type './ad9361_clk_gen.sh -help'.
+
+2. Additional design information files:-
+
+export_simulation generates following additional file that can be used for fetching
+the design files information or for integrating with external custom scripts.
+
+Name   : file_info.txt
+Purpose: This file contains detail design file information based on the compile order
+         when export_simulation was executed from Vivado. The file contains information
+         about the file type, name, whether it is part of the IP, associated library
+         and the file path information.

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/modelsim/ad9361_clk_gen.sh

@@ -0,0 +1,168 @@
+#!/bin/bash -f
+#*********************************************************************************************************
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# Filename    : ad9361_clk_gen.sh
+# Simulator   : Mentor Graphics ModelSim Simulator
+# Description : Simulation script for compiling, elaborating and verifying the project source files.
+#               The script will automatically create the design libraries sub-directories in the run
+#               directory, add the library logical mappings in the simulator setup file, create default
+#               'do/prj' file, execute compilation, elaboration and simulation steps.
+#
+# Generated by Vivado on Thu Apr 20 11:01:01 CST 2023
+# SW Build 2644227 on Wed Sep  4 09:44:18 MDT 2019
+#
+# Copyright 1986-2019 Xilinx, Inc. All Rights Reserved. 
+#
+# usage: ad9361_clk_gen.sh [-help]
+# usage: ad9361_clk_gen.sh [-lib_map_path]
+# usage: ad9361_clk_gen.sh [-noclean_files]
+# usage: ad9361_clk_gen.sh [-reset_run]
+#
+# Prerequisite:- To compile and run simulation, you must compile the Xilinx simulation libraries using the
+# 'compile_simlib' TCL command. For more information about this command, run 'compile_simlib -help' in the
+# Vivado Tcl Shell. Once the libraries have been compiled successfully, specify the -lib_map_path switch
+# that points to these libraries and rerun export_simulation. For more information about this switch please
+# type 'export_simulation -help' in the Tcl shell.
+#
+# You can also point to the simulation libraries by either replacing the <SPECIFY_COMPILED_LIB_PATH> in this
+# script with the compiled library directory path or specify this path with the '-lib_map_path' switch when
+# executing this script. Please type 'ad9361_clk_gen.sh -help' for more information.
+#
+# Additional references - 'Xilinx Vivado Design Suite User Guide:Logic simulation (UG900)'
+#
+#*********************************************************************************************************
+
+
+# Script info
+echo -e "ad9361_clk_gen.sh - Script generated by export_simulation (Vivado v2019.1.3 (64-bit)-id)\n"
+
+# Main steps
+run()
+{
+  check_args $# $1
+  setup $1 $2
+  compile
+  simulate
+}
+
+# RUN_STEP: <compile>
+compile()
+{
+  # Compile design files
+  source compile.do 2>&1 | tee -a compile.log
+
+}
+
+# RUN_STEP: <simulate>
+simulate()
+{
+  vsim -64 -c -do "do {simulate.do}" -l simulate.log
+}
+
+# STEP: setup
+setup()
+{
+  case $1 in
+    "-lib_map_path" )
+      if [[ ($2 == "") ]]; then
+        echo -e "ERROR: Simulation library directory path not specified (type \"./ad9361_clk_gen.sh -help\" for more information)\n"
+        exit 1
+      fi
+     copy_setup_file $2
+    ;;
+    "-reset_run" )
+      reset_run
+      echo -e "INFO: Simulation run files deleted.\n"
+      exit 0
+    ;;
+    "-noclean_files" )
+      # do not remove previous data
+    ;;
+    * )
+     copy_setup_file $2
+  esac
+
+  create_lib_dir
+
+  # Add any setup/initialization commands here:-
+
+  # <user specific commands>
+
+}
+
+# Copy modelsim.ini file
+copy_setup_file()
+{
+  file="modelsim.ini"
+  lib_map_path="<SPECIFY_COMPILED_LIB_PATH>"
+  if [[ ($1 != "" && -e $1) ]]; then
+    lib_map_path="$1"
+  else
+    echo -e "ERROR: Compiled simulation library directory path not specified or does not exist (type "./top.sh -help" for more information)\n"
+  fi
+  if [[ ($lib_map_path != "") ]]; then
+    src_file="$lib_map_path/$file"
+    cp $src_file .
+  fi
+}
+
+# Create design library directory
+create_lib_dir()
+{
+  lib_dir="modelsim_lib"
+  if [[ -e $lib_dir ]]; then
+    rm -rf $lib_dir
+  fi
+
+  mkdir $lib_dir
+
+}
+
+# Delete generated data from the previous run
+reset_run()
+{
+  files_to_remove=(compile.log elaborate.log simulate.log vsim.wlf modelsim_lib)
+  for (( i=0; i<${#files_to_remove[*]}; i++ )); do
+    file="${files_to_remove[i]}"
+    if [[ -e $file ]]; then
+      rm -rf $file
+    fi
+  done
+
+  create_lib_dir
+}
+
+# Check command line arguments
+check_args()
+{
+  if [[ ($1 == 1 ) && ($2 != "-lib_map_path" && $2 != "-noclean_files" && $2 != "-reset_run" && $2 != "-help" && $2 != "-h") ]]; then
+    echo -e "ERROR: Unknown option specified '$2' (type \"./ad9361_clk_gen.sh -help\" for more information)\n"
+    exit 1
+  fi
+
+  if [[ ($2 == "-help" || $2 == "-h") ]]; then
+    usage
+  fi
+}
+
+# Script usage
+usage()
+{
+  msg="Usage: ad9361_clk_gen.sh [-help]\n\
+Usage: ad9361_clk_gen.sh [-lib_map_path]\n\
+Usage: ad9361_clk_gen.sh [-reset_run]\n\
+Usage: ad9361_clk_gen.sh [-noclean_files]\n\n\
+[-help] -- Print help information for this script\n\n\
+[-lib_map_path <path>] -- Compiled simulation library directory path. The simulation library is compiled\n\
+using the compile_simlib tcl command. Please see 'compile_simlib -help' for more information.\n\n\
+[-reset_run] -- Recreate simulator setup files and library mappings for a clean run. The generated files\n\
+from the previous run will be removed. If you don't want to remove the simulator generated files, use the\n\
+-noclean_files switch.\n\n\
+[-noclean_files] -- Reset previous run, but do not remove simulator generated files from the previous run.\n\n"
+  echo -e $msg
+  exit 1
+}
+
+# Launch script
+run $1 $2

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/modelsim/compile.do

@@ -0,0 +1,23 @@
+vlib modelsim_lib/work
+vlib modelsim_lib/msim
+
+vlib modelsim_lib/msim/xil_defaultlib
+vlib modelsim_lib/msim/xpm
+
+vmap xil_defaultlib modelsim_lib/msim/xil_defaultlib
+vmap xpm modelsim_lib/msim/xpm
+
+vlog -work xil_defaultlib -64 -incr -sv "+incdir+../../../ipstatic" \
+"/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_cdc/hdl/xpm_cdc.sv" \
+"/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_memory/hdl/xpm_memory.sv" \
+
+vcom -work xpm -64 -93 \
+"/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_VCOMP.vhd" \
+
+vlog -work xil_defaultlib -64 -incr "+incdir+../../../ipstatic" \
+"../../../ip/ad9361_clk_gen/ad9361_clk_gen_clk_wiz.v" \
+"../../../ip/ad9361_clk_gen/ad9361_clk_gen.v" \
+
+vlog -work xil_defaultlib \
+"glbl.v"
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/modelsim/file_info.txt

@@ -0,0 +1,6 @@
+xpm_cdc.sv,systemverilog,xil_defaultlib,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_cdc/hdl/xpm_cdc.sv,incdir="../../../ipstatic"incdir="../../../ipstatic"
+xpm_memory.sv,systemverilog,xil_defaultlib,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_memory/hdl/xpm_memory.sv,incdir="../../../ipstatic"incdir="../../../ipstatic"
+xpm_VCOMP.vhd,vhdl,xpm,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_VCOMP.vhd,incdir="../../../ipstatic"incdir="../../../ipstatic"
+ad9361_clk_gen_clk_wiz.v,verilog,xil_defaultlib,../../../ip/ad9361_clk_gen/ad9361_clk_gen_clk_wiz.v,incdir="../../../ipstatic"incdir="../../../ipstatic"
+ad9361_clk_gen.v,verilog,xil_defaultlib,../../../ip/ad9361_clk_gen/ad9361_clk_gen.v,incdir="../../../ipstatic"incdir="../../../ipstatic"
+glbl.v,Verilog,xil_defaultlib,glbl.v

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/modelsim/glbl.v

@@ -0,0 +1,71 @@
+// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
+`ifndef GLBL
+`define GLBL
+`timescale  1 ps / 1 ps
+
+module glbl ();
+
+    parameter ROC_WIDTH = 100000;
+    parameter TOC_WIDTH = 0;
+
+//--------   STARTUP Globals --------------
+    wire GSR;
+    wire GTS;
+    wire GWE;
+    wire PRLD;
+    tri1 p_up_tmp;
+    tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
+
+    wire PROGB_GLBL;
+    wire CCLKO_GLBL;
+    wire FCSBO_GLBL;
+    wire [3:0] DO_GLBL;
+    wire [3:0] DI_GLBL;
+   
+    reg GSR_int;
+    reg GTS_int;
+    reg PRLD_int;
+
+//--------   JTAG Globals --------------
+    wire JTAG_TDO_GLBL;
+    wire JTAG_TCK_GLBL;
+    wire JTAG_TDI_GLBL;
+    wire JTAG_TMS_GLBL;
+    wire JTAG_TRST_GLBL;
+
+    reg JTAG_CAPTURE_GLBL;
+    reg JTAG_RESET_GLBL;
+    reg JTAG_SHIFT_GLBL;
+    reg JTAG_UPDATE_GLBL;
+    reg JTAG_RUNTEST_GLBL;
+
+    reg JTAG_SEL1_GLBL = 0;
+    reg JTAG_SEL2_GLBL = 0 ;
+    reg JTAG_SEL3_GLBL = 0;
+    reg JTAG_SEL4_GLBL = 0;
+
+    reg JTAG_USER_TDO1_GLBL = 1'bz;
+    reg JTAG_USER_TDO2_GLBL = 1'bz;
+    reg JTAG_USER_TDO3_GLBL = 1'bz;
+    reg JTAG_USER_TDO4_GLBL = 1'bz;
+
+    assign (strong1, weak0) GSR = GSR_int;
+    assign (strong1, weak0) GTS = GTS_int;
+    assign (weak1, weak0) PRLD = PRLD_int;
+
+    initial begin
+	GSR_int = 1'b1;
+	PRLD_int = 1'b1;
+	#(ROC_WIDTH)
+	GSR_int = 1'b0;
+	PRLD_int = 1'b0;
+    end
+
+    initial begin
+	GTS_int = 1'b1;
+	#(TOC_WIDTH)
+	GTS_int = 1'b0;
+    end
+
+endmodule
+`endif

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/modelsim/simulate.do

@@ -0,0 +1,16 @@
+onbreak {quit -f}
+onerror {quit -f}
+
+vsim -voptargs="+acc" -t 1ps -L xil_defaultlib -L xpm -L unisims_ver -L unimacro_ver -L secureip -lib xil_defaultlib xil_defaultlib.ad9361_clk_gen xil_defaultlib.glbl
+
+do {wave.do}
+
+view wave
+view structure
+view signals
+
+do {ad9361_clk_gen.udo}
+
+run -all
+
+quit -force

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/modelsim/wave.do

@@ -0,0 +1,2 @@
+add wave *
+add wave /glbl/GSR

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/questa/README.txt

@@ -0,0 +1,49 @@
+################################################################################
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# README.txt: Please read the sections below to understand the steps required to
+#             run the exported script and information about the source files.
+#
+# Generated by export_simulation on Thu Apr 20 11:01:01 CST 2023
+#
+################################################################################
+
+1. How to run the generated simulation script:-
+
+From the shell prompt in the current directory, issue the following command:-
+
+./ad9361_clk_gen.sh
+
+This command will launch the 'compile', 'elaborate' and 'simulate' functions
+implemented in the script file for the 3-step flow. These functions are called
+from the main 'run' function in the script file.
+
+The 'run' function first executes the 'setup' function, the purpose of which is to
+create simulator specific setup files, create design library mappings and library
+directories and copy 'glbl.v' from the Vivado software install location into the
+current directory.
+
+The 'setup' function is also used for removing the simulator generated data in
+order to reset the current directory to the original state when export_simulation
+was launched from Vivado. This generated data can be removed by specifying the
+'-reset_run' switch to the './ad9361_clk_gen.sh' script.
+
+./ad9361_clk_gen.sh -reset_run
+
+To keep the generated data from the previous run but regenerate the setup files and
+library directories, use the '-noclean_files' switch.
+
+./ad9361_clk_gen.sh -noclean_files
+
+For more information on the script, please type './ad9361_clk_gen.sh -help'.
+
+2. Additional design information files:-
+
+export_simulation generates following additional file that can be used for fetching
+the design files information or for integrating with external custom scripts.
+
+Name   : file_info.txt
+Purpose: This file contains detail design file information based on the compile order
+         when export_simulation was executed from Vivado. The file contains information
+         about the file type, name, whether it is part of the IP, associated library
+         and the file path information.

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/questa/ad9361_clk_gen.sh

@@ -0,0 +1,173 @@
+#!/bin/bash -f
+#*********************************************************************************************************
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# Filename    : ad9361_clk_gen.sh
+# Simulator   : Mentor Graphics Questa Advanced Simulator
+# Description : Simulation script for compiling, elaborating and verifying the project source files.
+#               The script will automatically create the design libraries sub-directories in the run
+#               directory, add the library logical mappings in the simulator setup file, create default
+#               'do/prj' file, execute compilation, elaboration and simulation steps.
+#
+# Generated by Vivado on Thu Apr 20 11:01:01 CST 2023
+# SW Build 2644227 on Wed Sep  4 09:44:18 MDT 2019
+#
+# Copyright 1986-2019 Xilinx, Inc. All Rights Reserved. 
+#
+# usage: ad9361_clk_gen.sh [-help]
+# usage: ad9361_clk_gen.sh [-lib_map_path]
+# usage: ad9361_clk_gen.sh [-noclean_files]
+# usage: ad9361_clk_gen.sh [-reset_run]
+#
+# Prerequisite:- To compile and run simulation, you must compile the Xilinx simulation libraries using the
+# 'compile_simlib' TCL command. For more information about this command, run 'compile_simlib -help' in the
+# Vivado Tcl Shell. Once the libraries have been compiled successfully, specify the -lib_map_path switch
+# that points to these libraries and rerun export_simulation. For more information about this switch please
+# type 'export_simulation -help' in the Tcl shell.
+#
+# You can also point to the simulation libraries by either replacing the <SPECIFY_COMPILED_LIB_PATH> in this
+# script with the compiled library directory path or specify this path with the '-lib_map_path' switch when
+# executing this script. Please type 'ad9361_clk_gen.sh -help' for more information.
+#
+# Additional references - 'Xilinx Vivado Design Suite User Guide:Logic simulation (UG900)'
+#
+#*********************************************************************************************************
+
+
+# Script info
+echo -e "ad9361_clk_gen.sh - Script generated by export_simulation (Vivado v2019.1.3 (64-bit)-id)\n"
+
+# Main steps
+run()
+{
+  check_args $# $1
+  setup $1 $2
+  compile
+  elaborate
+  simulate
+}
+
+# RUN_STEP: <compile>
+compile()
+{
+  # Compile design files
+  source compile.do 2>&1 | tee -a compile.log
+
+}
+
+# RUN_STEP: <elaborate>
+elaborate()
+{
+  source elaborate.do 2>&1 | tee -a elaborate.log
+}
+
+# RUN_STEP: <simulate>
+simulate()
+{
+  vsim -64 -c -do "do {simulate.do}" -l simulate.log
+}
+
+# STEP: setup
+setup()
+{
+  case $1 in
+    "-lib_map_path" )
+      if [[ ($2 == "") ]]; then
+        echo -e "ERROR: Simulation library directory path not specified (type \"./ad9361_clk_gen.sh -help\" for more information)\n"
+        exit 1
+      fi
+     copy_setup_file $2
+    ;;
+    "-reset_run" )
+      reset_run
+      echo -e "INFO: Simulation run files deleted.\n"
+      exit 0
+    ;;
+    "-noclean_files" )
+      # do not remove previous data
+    ;;
+    * )
+     copy_setup_file $2
+  esac
+
+  create_lib_dir
+
+  # Add any setup/initialization commands here:-
+
+  # <user specific commands>
+
+}
+
+# Copy modelsim.ini file
+copy_setup_file()
+{
+  file="modelsim.ini"
+  lib_map_path=""
+  if [[ ($1 != "") ]]; then
+    lib_map_path="$1"
+  fi
+  if [[ ($lib_map_path != "") ]]; then
+    src_file="$lib_map_path/$file"
+    cp $src_file .
+  fi
+}
+
+# Create design library directory
+create_lib_dir()
+{
+  lib_dir="questa_lib"
+  if [[ -e $lib_dir ]]; then
+    rm -rf $lib_dir
+  fi
+
+  mkdir $lib_dir
+
+}
+
+# Delete generated data from the previous run
+reset_run()
+{
+  files_to_remove=(compile.log elaborate.log simulate.log vsim.wlf questa_lib)
+  for (( i=0; i<${#files_to_remove[*]}; i++ )); do
+    file="${files_to_remove[i]}"
+    if [[ -e $file ]]; then
+      rm -rf $file
+    fi
+  done
+
+  create_lib_dir
+}
+
+# Check command line arguments
+check_args()
+{
+  if [[ ($1 == 1 ) && ($2 != "-lib_map_path" && $2 != "-noclean_files" && $2 != "-reset_run" && $2 != "-help" && $2 != "-h") ]]; then
+    echo -e "ERROR: Unknown option specified '$2' (type \"./ad9361_clk_gen.sh -help\" for more information)\n"
+    exit 1
+  fi
+
+  if [[ ($2 == "-help" || $2 == "-h") ]]; then
+    usage
+  fi
+}
+
+# Script usage
+usage()
+{
+  msg="Usage: ad9361_clk_gen.sh [-help]\n\
+Usage: ad9361_clk_gen.sh [-lib_map_path]\n\
+Usage: ad9361_clk_gen.sh [-reset_run]\n\
+Usage: ad9361_clk_gen.sh [-noclean_files]\n\n\
+[-help] -- Print help information for this script\n\n\
+[-lib_map_path <path>] -- Compiled simulation library directory path. The simulation library is compiled\n\
+using the compile_simlib tcl command. Please see 'compile_simlib -help' for more information.\n\n\
+[-reset_run] -- Recreate simulator setup files and library mappings for a clean run. The generated files\n\
+from the previous run will be removed. If you don't want to remove the simulator generated files, use the\n\
+-noclean_files switch.\n\n\
+[-noclean_files] -- Reset previous run, but do not remove simulator generated files from the previous run.\n\n"
+  echo -e $msg
+  exit 1
+}
+
+# Launch script
+run $1 $2

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/questa/compile.do

@@ -0,0 +1,23 @@
+vlib questa_lib/work
+vlib questa_lib/msim
+
+vlib questa_lib/msim/xil_defaultlib
+vlib questa_lib/msim/xpm
+
+vmap xil_defaultlib questa_lib/msim/xil_defaultlib
+vmap xpm questa_lib/msim/xpm
+
+vlog -work xil_defaultlib -64 -sv "+incdir+../../../ipstatic" \
+"/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_cdc/hdl/xpm_cdc.sv" \
+"/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_memory/hdl/xpm_memory.sv" \
+
+vcom -work xpm -64 -93 \
+"/tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_VCOMP.vhd" \
+
+vlog -work xil_defaultlib -64 "+incdir+../../../ipstatic" \
+"../../../ip/ad9361_clk_gen/ad9361_clk_gen_clk_wiz.v" \
+"../../../ip/ad9361_clk_gen/ad9361_clk_gen.v" \
+
+vlog -work xil_defaultlib \
+"glbl.v"
+

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/questa/elaborate.do

@@ -0,0 +1 @@
+vopt -64 +acc -l elaborate.log -L xil_defaultlib -L xpm -L unisims_ver -L unimacro_ver -L secureip -work xil_defaultlib xil_defaultlib.ad9361_clk_gen xil_defaultlib.glbl -o ad9361_clk_gen_opt

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/questa/file_info.txt

@@ -0,0 +1,6 @@
+xpm_cdc.sv,systemverilog,xil_defaultlib,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_cdc/hdl/xpm_cdc.sv,incdir="../../../ipstatic"incdir="../../../ipstatic"
+xpm_memory.sv,systemverilog,xil_defaultlib,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_memory/hdl/xpm_memory.sv,incdir="../../../ipstatic"incdir="../../../ipstatic"
+xpm_VCOMP.vhd,vhdl,xpm,../tools/Xilinx/Vivado/2019.1/data/ip/xpm/xpm_VCOMP.vhd,incdir="../../../ipstatic"incdir="../../../ipstatic"
+ad9361_clk_gen_clk_wiz.v,verilog,xil_defaultlib,../../../ip/ad9361_clk_gen/ad9361_clk_gen_clk_wiz.v,incdir="../../../ipstatic"incdir="../../../ipstatic"
+ad9361_clk_gen.v,verilog,xil_defaultlib,../../../ip/ad9361_clk_gen/ad9361_clk_gen.v,incdir="../../../ipstatic"incdir="../../../ipstatic"
+glbl.v,Verilog,xil_defaultlib,glbl.v

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/questa/glbl.v

@@ -0,0 +1,71 @@
+// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
+`ifndef GLBL
+`define GLBL
+`timescale  1 ps / 1 ps
+
+module glbl ();
+
+    parameter ROC_WIDTH = 100000;
+    parameter TOC_WIDTH = 0;
+
+//--------   STARTUP Globals --------------
+    wire GSR;
+    wire GTS;
+    wire GWE;
+    wire PRLD;
+    tri1 p_up_tmp;
+    tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
+
+    wire PROGB_GLBL;
+    wire CCLKO_GLBL;
+    wire FCSBO_GLBL;
+    wire [3:0] DO_GLBL;
+    wire [3:0] DI_GLBL;
+   
+    reg GSR_int;
+    reg GTS_int;
+    reg PRLD_int;
+
+//--------   JTAG Globals --------------
+    wire JTAG_TDO_GLBL;
+    wire JTAG_TCK_GLBL;
+    wire JTAG_TDI_GLBL;
+    wire JTAG_TMS_GLBL;
+    wire JTAG_TRST_GLBL;
+
+    reg JTAG_CAPTURE_GLBL;
+    reg JTAG_RESET_GLBL;
+    reg JTAG_SHIFT_GLBL;
+    reg JTAG_UPDATE_GLBL;
+    reg JTAG_RUNTEST_GLBL;
+
+    reg JTAG_SEL1_GLBL = 0;
+    reg JTAG_SEL2_GLBL = 0 ;
+    reg JTAG_SEL3_GLBL = 0;
+    reg JTAG_SEL4_GLBL = 0;
+
+    reg JTAG_USER_TDO1_GLBL = 1'bz;
+    reg JTAG_USER_TDO2_GLBL = 1'bz;
+    reg JTAG_USER_TDO3_GLBL = 1'bz;
+    reg JTAG_USER_TDO4_GLBL = 1'bz;
+
+    assign (strong1, weak0) GSR = GSR_int;
+    assign (strong1, weak0) GTS = GTS_int;
+    assign (weak1, weak0) PRLD = PRLD_int;
+
+    initial begin
+	GSR_int = 1'b1;
+	PRLD_int = 1'b1;
+	#(ROC_WIDTH)
+	GSR_int = 1'b0;
+	PRLD_int = 1'b0;
+    end
+
+    initial begin
+	GTS_int = 1'b1;
+	#(TOC_WIDTH)
+	GTS_int = 1'b0;
+    end
+
+endmodule
+`endif

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/questa/simulate.do

@@ -0,0 +1,16 @@
+onbreak {quit -f}
+onerror {quit -f}
+
+vsim -t 1ps -lib xil_defaultlib ad9361_clk_gen_opt
+
+do {wave.do}
+
+view wave
+view structure
+view signals
+
+do {ad9361_clk_gen.udo}
+
+run -all
+
+quit -force

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/questa/wave.do

@@ -0,0 +1,2 @@
+add wave *
+add wave /glbl/GSR

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/riviera/README.txt

@@ -0,0 +1,49 @@
+################################################################################
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# README.txt: Please read the sections below to understand the steps required to
+#             run the exported script and information about the source files.
+#
+# Generated by export_simulation on Thu Apr 20 11:01:01 CST 2023
+#
+################################################################################
+
+1. How to run the generated simulation script:-
+
+From the shell prompt in the current directory, issue the following command:-
+
+./ad9361_clk_gen.sh
+
+This command will launch the 'compile', 'elaborate' and 'simulate' functions
+implemented in the script file for the 3-step flow. These functions are called
+from the main 'run' function in the script file.
+
+The 'run' function first executes the 'setup' function, the purpose of which is to
+create simulator specific setup files, create design library mappings and library
+directories and copy 'glbl.v' from the Vivado software install location into the
+current directory.
+
+The 'setup' function is also used for removing the simulator generated data in
+order to reset the current directory to the original state when export_simulation
+was launched from Vivado. This generated data can be removed by specifying the
+'-reset_run' switch to the './ad9361_clk_gen.sh' script.
+
+./ad9361_clk_gen.sh -reset_run
+
+To keep the generated data from the previous run but regenerate the setup files and
+library directories, use the '-noclean_files' switch.
+
+./ad9361_clk_gen.sh -noclean_files
+
+For more information on the script, please type './ad9361_clk_gen.sh -help'.
+
+2. Additional design information files:-
+
+export_simulation generates following additional file that can be used for fetching
+the design files information or for integrating with external custom scripts.
+
+Name   : file_info.txt
+Purpose: This file contains detail design file information based on the compile order
+         when export_simulation was executed from Vivado. The file contains information
+         about the file type, name, whether it is part of the IP, associated library
+         and the file path information.

projects/dl814_k7/dl814_k7_null_verify/ip/ip_user_files/sim_scripts/ad9361_clk_gen/riviera/ad9361_clk_gen.sh

@@ -0,0 +1,152 @@
+#!/bin/bash -f
+#*********************************************************************************************************
+# Vivado (TM) v2019.1.3 (64-bit)
+#
+# Filename    : ad9361_clk_gen.sh
+# Simulator   : Aldec Riviera-PRO Simulator
+# Description : Simulation script for compiling, elaborating and verifying the project source files.
+#               The script will automatically create the design libraries sub-directories in the run
+#               directory, add the library logical mappings in the simulator setup file, create default
+#               'do/prj' file, execute compilation, elaboration and simulation steps.
+#
+# Generated by Vivado on Thu Apr 20 11:01:01 CST 2023
+# SW Build 2644227 on Wed Sep  4 09:44:18 MDT 2019
+#
+# Copyright 1986-2019 Xilinx, Inc. All Rights Reserved. 
+#
+# usage: ad9361_clk_gen.sh [-help]
+# usage: ad9361_clk_gen.sh [-lib_map_path]
+# usage: ad9361_clk_gen.sh [-noclean_files]
+# usage: ad9361_clk_gen.sh [-reset_run]
+#
+# Prerequisite:- To compile and run simulation, you must compile the Xilinx simulation libraries using the
+# 'compile_simlib' TCL command. For more information about this command, run 'compile_simlib -help' in the
+# Vivado Tcl Shell. Once the libraries have been compiled successfully, specify the -lib_map_path switch
+# that points to these libraries and rerun export_simulation. For more information about this switch please
+# type 'export_simulation -help' in the Tcl shell.
+#
+# You can also point to the simulation libraries by either replacing the <SPECIFY_COMPILED_LIB_PATH> in this
+# script with the compiled library directory path or specify this path with the '-lib_map_path' switch when
+# executing this script. Please type 'ad9361_clk_gen.sh -help' for more information.
+#
+# Additional references - 'Xilinx Vivado Design Suite User Guide:Logic simulation (UG900)'
+#
+#*********************************************************************************************************
+
+
+# Script info
+echo -e "ad9361_clk_gen.sh - Script generated by export_simulation (Vivado v2019.1.3 (64-bit)-id)\n"
+
+# Main steps
+run()
+{
+  check_args $# $1
+  setup $1 $2
+  compile
+  simulate
+}
+
+# RUN_STEP: <compile>
+compile()
+{
+  # Compile design files
+  source compile.do 2>&1 | tee -a compile.log
+
+}
+
+# RUN_STEP: <simulate>
+simulate()
+{
+  runvsimsa -l simulate.log -do "do {simulate.do}"
+}
+
+# STEP: setup
+setup()
+{
+  case $1 in
+    "-lib_map_path" )
+      if [[ ($2 == "") ]]; then
+        echo -e "ERROR: Simulation library directory path not specified (type \"./ad9361_clk_gen.sh -help\" for more information)\n"
+        exit 1
+      fi
+     map_setup_file $2
+    ;;
+    "-reset_run" )
+      reset_run
+      echo -e "INFO: Simulation run files deleted.\n"
+      exit 0
+    ;;
+    "-noclean_files" )
+      # do not remove previous data
+    ;;
+    * )
+     map_setup_file $2
+  esac
+
+  # Add any setup/initialization commands here:-
+
+  # <user specific commands>
+
+}
+
+# Map library.cfg file
+map_setup_file()
+{
+  file="library.cfg"
+  lib_map_path=""
+  if [[ ($1 != "") ]]; then
+    lib_map_path="$1"
+  fi
+  if [[ ($lib_map_path != "") ]]; then
+    src_file="$lib_map_path/$file"
+    if [[ -e $src_file ]]; then
+      vmap -link $lib_map_path
+    fi
+  fi
+}
+
+# Delete generated data from the previous run
+reset_run()
+{
+  files_to_remove=(compile.log elaboration.log simulate.log dataset.asdb work riviera)
+  for (( i=0; i<${#files_to_remove[*]}; i++ )); do
+    file="${files_to_remove[i]}"
+    if [[ -e $file ]]; then
+      rm -rf $file
+    fi
+  done
+}
+
+# Check command line arguments
+check_args()
+{
+  if [[ ($1 == 1 ) && ($2 != "-lib_map_path" && $2 != "-noclean_files" && $2 != "-reset_run" && $2 != "-help" && $2 != "-h") ]]; then
+    echo -e "ERROR: Unknown option specified '$2' (type \"./ad9361_clk_gen.sh -help\" for more information)\n"
+    exit 1
+  fi
+
+  if [[ ($2 == "-help" || $2 == "-h") ]]; then
+    usage
+  fi
+}
+
+# Script usage
+usage()
+{
+  msg="Usage: ad9361_clk_gen.sh [-help]\n\
+Usage: ad9361_clk_gen.sh [-lib_map_path]\n\
+Usage: ad9361_clk_gen.sh [-reset_run]\n\
+Usage: ad9361_clk_gen.sh [-noclean_files]\n\n\
+[-help] -- Print help information for this script\n\n\
+[-lib_map_path <path>] -- Compiled simulation library directory path. The simulation library is compiled\n\
+using the compile_simlib tcl command. Please see 'compile_simlib -help' for more information.\n\n\
+[-reset_run] -- Recreate simulator setup files and library mappings for a clean run. The generated files\n\
+from the previous run will be removed. If you don't want to remove the simulator generated files, use the\n\
+-noclean_files switch.\n\n\
+[-noclean_files] -- Reset previous run, but do not remove simulator generated files from the previous run.\n\n"
+  echo -e $msg
+  exit 1
+}
+
+# Launch script
+run $1 $2