prepare for major change in anti-jamming

resimulated dl814_k7_cal_coarse with multiple trigger and phase compensation; 将校准信号发端移植到地检新射频发送程序上,但是未合并扫频自动校准程序

projects/dl814_k7/dl814_k7_cal_coarse/project.tcl

@@ -3,7 +3,7 @@
 #
 # project.tcl: Tcl script for re-creating project 'project'
 #
-# Generated by Vivado on Thu Jun 15 18:37:56 CST 2023
+# Generated by Vivado on Sun Jul 09 14:58:03 CST 2023
 # IP Build 2633630 on Wed Sep  4 12:30:14 MDT 2019
 #
 # This file contains the Vivado Tcl commands for re-creating the project to the state*
@@ -194,7 +194,7 @@ set proj_dir [get_property directory [current_project]]
 
 # Set project properties
 set obj [current_project]
-set_property -name "compxlib.modelsim_compiled_library_dir" -value "/home/josh/Mentor/CompLib/2019.1.3" -objects $obj
+set_property -name "compxlib.modelsim_compiled_library_dir" -value "/home/josh/Software/Xilinx/CompLib/Model/2019.1" -objects $obj
 set_property -name "compxlib.vcs_compiled_library_dir" -value "/home/josh/Software/Xilinx/CompLib/VCS/2019.1" -objects $obj
 set_property -name "corecontainer.enable" -value "1" -objects $obj
 set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
@@ -229,7 +229,7 @@ set_property -name "webtalk.modelsim_launch_sim" -value "2" -objects $obj
 set_property -name "webtalk.questa_export_sim" -value "92" -objects $obj
 set_property -name "webtalk.riviera_export_sim" -value "92" -objects $obj
 set_property -name "webtalk.vcs_export_sim" -value "92" -objects $obj
-set_property -name "webtalk.vcs_launch_sim" -value "69" -objects $obj
+set_property -name "webtalk.vcs_launch_sim" -value "77" -objects $obj
 set_property -name "webtalk.xsim_export_sim" -value "92" -objects $obj
 set_property -name "xpm_libraries" -value "XPM_CDC XPM_MEMORY" -objects $obj
 
@@ -706,6 +706,7 @@ add_files -norecurse -fileset $obj $files
 
 # Set 'sim_1' fileset properties
 set obj [get_filesets sim_1]
+set_property -name "sim_mode" -value "post-implementation" -objects $obj
 set_property -name "top" -value "tb_rx_pre_test" -objects $obj
 set_property -name "top_auto_set" -value "0" -objects $obj
 set_property -name "top_lib" -value "xil_defaultlib" -objects $obj

projects/dl814_k7/dl814_k7_cal_coarse/testbenches/tb_rx_pre_test.v

@@ -113,12 +113,24 @@ initial begin
     wait(ad9361_cal_valid);
     #1000
     hop_trigger = 1'b1;
-    #100
+
+    #(192*200*10) // after 200us, trig again
     hop_trigger = 1'b0;
-    #(19600*40-100) // after a long time, trig again
+
+    #(192*200*10) // after 200us, trig again
     hop_trigger = 1'b1;
-    #100
+
+    #(192*200*10) // after 200us, trig again
     hop_trigger = 1'b0;
+
+    #(192*200*10) // after 200us, trig again
+    hop_trigger = 1'b1;
+
+    #(192*200*10) // after 200us, trig again
+    hop_trigger = 1'b0;
+
+    #(192*200*10) // after 200us, trig again
+    hop_trigger = 1'b1;
 end
 
 always @(posedge sys_clk) begin
@@ -192,7 +204,8 @@ assign weight_stream_data = weight_stream_buf[FRAME_BITS-1-weight_stream_cnt];
 ////////////////////////////////////////////////////////////////////////////////
 
 rx_pre_process #(
-    .OUTPUT_DATA_WIDTH  (30 )
+    .OUTPUT_DATA_WIDTH  (30     ),
+    .SNAPSHOT_NUM       (256    )
 ) u_rx_pre_process
 (
     // clock & reset
@@ -210,6 +223,11 @@ rx_pre_process #(
     .rx_ch3_q           (rx_ch3_q           ),
     .rx_ch4_i           (rx_ch4_i           ),
     .rx_ch4_q           (rx_ch4_q           ),
+    // input channel phase
+    .phase_ch1          ('b0                ),
+    .phase_ch2          ('b0                ),
+    .phase_ch3          ('b0                ),
+    .phase_ch4          ('b0                ),
     // ad9361 calibration interface
     .ad9361_1_cal_start (ad9361_1_cal_start ),
     .ad9361_1_cal_done  (ad9361_1_cal_done  ),