initial commit, add dds_par module
This commit is contained in:
@@ -0,0 +1,855 @@
|
||||
# Definitional proc to organize widgets for parameters.
|
||||
proc init_gui { IPINST } {
|
||||
ipgui::add_param $IPINST -name "Component_Name"
|
||||
#Adding Page
|
||||
set AXI_PWM_Generator [ipgui::add_page $IPINST -name "AXI PWM Generator"]
|
||||
set ASYNC_CLK_EN [ipgui::add_param $IPINST -name "ASYNC_CLK_EN" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {External clock for the counter} ${ASYNC_CLK_EN}
|
||||
set EXT_ASYNC_SYNC [ipgui::add_param $IPINST -name "EXT_ASYNC_SYNC" -parent ${AXI_PWM_Generator} -widget checkBox]
|
||||
set_property tooltip {NOTE: If active the ext_sync will be delayed 2 clock cycles.} ${EXT_ASYNC_SYNC}
|
||||
ipgui::add_param $IPINST -name "N_PWMS" -parent ${AXI_PWM_Generator}
|
||||
set PWM_EXT_SYNC [ipgui::add_param $IPINST -name "PWM_EXT_SYNC" -parent ${AXI_PWM_Generator} -widget checkBox]
|
||||
set_property tooltip {NOTE: If active the whole pwm gen module will be waiting for the ext_sync to be set low. A load config or reset must be used before deaserting the ext_sync} ${PWM_EXT_SYNC}
|
||||
set PULSE_0_WIDTH [ipgui::add_param $IPINST -name "PULSE_0_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_0_WIDTH}
|
||||
set PULSE_0_PERIOD [ipgui::add_param $IPINST -name "PULSE_0_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_0_PERIOD}
|
||||
set PULSE_0_OFFSET [ipgui::add_param $IPINST -name "PULSE_0_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_0_OFFSET}
|
||||
set PULSE_1_WIDTH [ipgui::add_param $IPINST -name "PULSE_1_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_1_WIDTH}
|
||||
set PULSE_1_PERIOD [ipgui::add_param $IPINST -name "PULSE_1_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_1_PERIOD}
|
||||
set PULSE_1_OFFSET [ipgui::add_param $IPINST -name "PULSE_1_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_1_OFFSET}
|
||||
set PULSE_2_WIDTH [ipgui::add_param $IPINST -name "PULSE_2_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_2_WIDTH}
|
||||
set PULSE_2_PERIOD [ipgui::add_param $IPINST -name "PULSE_2_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_2_PERIOD}
|
||||
set PULSE_2_OFFSET [ipgui::add_param $IPINST -name "PULSE_2_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_2_OFFSET}
|
||||
set PULSE_3_WIDTH [ipgui::add_param $IPINST -name "PULSE_3_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_3_WIDTH}
|
||||
set PULSE_3_PERIOD [ipgui::add_param $IPINST -name "PULSE_3_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_3_PERIOD}
|
||||
set PULSE_3_OFFSET [ipgui::add_param $IPINST -name "PULSE_3_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_3_OFFSET}
|
||||
set PULSE_4_WIDTH [ipgui::add_param $IPINST -name "PULSE_4_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_4_WIDTH}
|
||||
set PULSE_4_PERIOD [ipgui::add_param $IPINST -name "PULSE_4_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_4_PERIOD}
|
||||
set PULSE_4_OFFSET [ipgui::add_param $IPINST -name "PULSE_4_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_4_OFFSET}
|
||||
set PULSE_5_WIDTH [ipgui::add_param $IPINST -name "PULSE_5_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_5_WIDTH}
|
||||
set PULSE_5_PERIOD [ipgui::add_param $IPINST -name "PULSE_5_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_5_PERIOD}
|
||||
set PULSE_5_OFFSET [ipgui::add_param $IPINST -name "PULSE_5_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_5_OFFSET}
|
||||
set PULSE_6_WIDTH [ipgui::add_param $IPINST -name "PULSE_6_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_6_WIDTH}
|
||||
set PULSE_6_PERIOD [ipgui::add_param $IPINST -name "PULSE_6_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_6_PERIOD}
|
||||
set PULSE_6_OFFSET [ipgui::add_param $IPINST -name "PULSE_6_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_6_OFFSET}
|
||||
set PULSE_7_WIDTH [ipgui::add_param $IPINST -name "PULSE_7_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_7_WIDTH}
|
||||
set PULSE_7_PERIOD [ipgui::add_param $IPINST -name "PULSE_7_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_7_PERIOD}
|
||||
set PULSE_7_OFFSET [ipgui::add_param $IPINST -name "PULSE_7_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_7_OFFSET}
|
||||
set PULSE_8_WIDTH [ipgui::add_param $IPINST -name "PULSE_8_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_8_WIDTH}
|
||||
set PULSE_8_PERIOD [ipgui::add_param $IPINST -name "PULSE_8_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_8_PERIOD}
|
||||
set PULSE_8_OFFSET [ipgui::add_param $IPINST -name "PULSE_8_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_8_OFFSET}
|
||||
set PULSE_9_WIDTH [ipgui::add_param $IPINST -name "PULSE_9_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_9_WIDTH}
|
||||
set PULSE_9_PERIOD [ipgui::add_param $IPINST -name "PULSE_9_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_9_PERIOD}
|
||||
set PULSE_9_OFFSET [ipgui::add_param $IPINST -name "PULSE_9_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_9_OFFSET}
|
||||
set PULSE_10_WIDTH [ipgui::add_param $IPINST -name "PULSE_10_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_10_WIDTH}
|
||||
set PULSE_10_PERIOD [ipgui::add_param $IPINST -name "PULSE_10_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_10_PERIOD}
|
||||
set PULSE_10_OFFSET [ipgui::add_param $IPINST -name "PULSE_10_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_10_OFFSET}
|
||||
set PULSE_11_WIDTH [ipgui::add_param $IPINST -name "PULSE_11_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_11_WIDTH}
|
||||
set PULSE_11_PERIOD [ipgui::add_param $IPINST -name "PULSE_11_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_11_PERIOD}
|
||||
set PULSE_11_OFFSET [ipgui::add_param $IPINST -name "PULSE_11_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_11_OFFSET}
|
||||
set PULSE_12_WIDTH [ipgui::add_param $IPINST -name "PULSE_12_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_12_WIDTH}
|
||||
set PULSE_12_PERIOD [ipgui::add_param $IPINST -name "PULSE_12_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_12_PERIOD}
|
||||
set PULSE_12_OFFSET [ipgui::add_param $IPINST -name "PULSE_12_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_12_OFFSET}
|
||||
set PULSE_13_WIDTH [ipgui::add_param $IPINST -name "PULSE_13_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_13_WIDTH}
|
||||
set PULSE_13_PERIOD [ipgui::add_param $IPINST -name "PULSE_13_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_13_PERIOD}
|
||||
set PULSE_13_OFFSET [ipgui::add_param $IPINST -name "PULSE_13_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_13_OFFSET}
|
||||
set PULSE_14_WIDTH [ipgui::add_param $IPINST -name "PULSE_14_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_14_WIDTH}
|
||||
set PULSE_14_PERIOD [ipgui::add_param $IPINST -name "PULSE_14_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_14_PERIOD}
|
||||
set PULSE_14_OFFSET [ipgui::add_param $IPINST -name "PULSE_14_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_14_OFFSET}
|
||||
set PULSE_15_WIDTH [ipgui::add_param $IPINST -name "PULSE_15_WIDTH" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {PULSE width of the generated signal. The unit interval is the system or external clock period.} ${PULSE_15_WIDTH}
|
||||
set PULSE_15_PERIOD [ipgui::add_param $IPINST -name "PULSE_15_PERIOD" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Period of the generated signal. The unit interval is the system or external clock period.} ${PULSE_15_PERIOD}
|
||||
set PULSE_15_OFFSET [ipgui::add_param $IPINST -name "PULSE_15_OFFSET" -parent ${AXI_PWM_Generator}]
|
||||
set_property tooltip {Offset of the generated signal referenced to PULSE 1. The unit interval is the system or external clock period.} ${PULSE_15_OFFSET}
|
||||
|
||||
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.ASYNC_CLK_EN { PARAM_VALUE.ASYNC_CLK_EN } {
|
||||
# Procedure called to update ASYNC_CLK_EN when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.ASYNC_CLK_EN { PARAM_VALUE.ASYNC_CLK_EN } {
|
||||
# Procedure called to validate ASYNC_CLK_EN
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.EXT_ASYNC_SYNC { PARAM_VALUE.EXT_ASYNC_SYNC } {
|
||||
# Procedure called to update EXT_ASYNC_SYNC when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.EXT_ASYNC_SYNC { PARAM_VALUE.EXT_ASYNC_SYNC } {
|
||||
# Procedure called to validate EXT_ASYNC_SYNC
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.ID { PARAM_VALUE.ID } {
|
||||
# Procedure called to update ID when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.ID { PARAM_VALUE.ID } {
|
||||
# Procedure called to validate ID
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.N_PWMS { PARAM_VALUE.N_PWMS } {
|
||||
# Procedure called to update N_PWMS when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.N_PWMS { PARAM_VALUE.N_PWMS } {
|
||||
# Procedure called to validate N_PWMS
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_0_OFFSET { PARAM_VALUE.PULSE_0_OFFSET } {
|
||||
# Procedure called to update PULSE_0_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_0_OFFSET { PARAM_VALUE.PULSE_0_OFFSET } {
|
||||
# Procedure called to validate PULSE_0_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_0_PERIOD { PARAM_VALUE.PULSE_0_PERIOD } {
|
||||
# Procedure called to update PULSE_0_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_0_PERIOD { PARAM_VALUE.PULSE_0_PERIOD } {
|
||||
# Procedure called to validate PULSE_0_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_0_WIDTH { PARAM_VALUE.PULSE_0_WIDTH } {
|
||||
# Procedure called to update PULSE_0_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_0_WIDTH { PARAM_VALUE.PULSE_0_WIDTH } {
|
||||
# Procedure called to validate PULSE_0_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_10_OFFSET { PARAM_VALUE.PULSE_10_OFFSET } {
|
||||
# Procedure called to update PULSE_10_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_10_OFFSET { PARAM_VALUE.PULSE_10_OFFSET } {
|
||||
# Procedure called to validate PULSE_10_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_10_PERIOD { PARAM_VALUE.PULSE_10_PERIOD } {
|
||||
# Procedure called to update PULSE_10_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_10_PERIOD { PARAM_VALUE.PULSE_10_PERIOD } {
|
||||
# Procedure called to validate PULSE_10_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_10_WIDTH { PARAM_VALUE.PULSE_10_WIDTH } {
|
||||
# Procedure called to update PULSE_10_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_10_WIDTH { PARAM_VALUE.PULSE_10_WIDTH } {
|
||||
# Procedure called to validate PULSE_10_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_11_OFFSET { PARAM_VALUE.PULSE_11_OFFSET } {
|
||||
# Procedure called to update PULSE_11_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_11_OFFSET { PARAM_VALUE.PULSE_11_OFFSET } {
|
||||
# Procedure called to validate PULSE_11_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_11_PERIOD { PARAM_VALUE.PULSE_11_PERIOD } {
|
||||
# Procedure called to update PULSE_11_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_11_PERIOD { PARAM_VALUE.PULSE_11_PERIOD } {
|
||||
# Procedure called to validate PULSE_11_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_11_WIDTH { PARAM_VALUE.PULSE_11_WIDTH } {
|
||||
# Procedure called to update PULSE_11_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_11_WIDTH { PARAM_VALUE.PULSE_11_WIDTH } {
|
||||
# Procedure called to validate PULSE_11_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_12_OFFSET { PARAM_VALUE.PULSE_12_OFFSET } {
|
||||
# Procedure called to update PULSE_12_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_12_OFFSET { PARAM_VALUE.PULSE_12_OFFSET } {
|
||||
# Procedure called to validate PULSE_12_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_12_PERIOD { PARAM_VALUE.PULSE_12_PERIOD } {
|
||||
# Procedure called to update PULSE_12_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_12_PERIOD { PARAM_VALUE.PULSE_12_PERIOD } {
|
||||
# Procedure called to validate PULSE_12_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_12_WIDTH { PARAM_VALUE.PULSE_12_WIDTH } {
|
||||
# Procedure called to update PULSE_12_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_12_WIDTH { PARAM_VALUE.PULSE_12_WIDTH } {
|
||||
# Procedure called to validate PULSE_12_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_13_OFFSET { PARAM_VALUE.PULSE_13_OFFSET } {
|
||||
# Procedure called to update PULSE_13_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_13_OFFSET { PARAM_VALUE.PULSE_13_OFFSET } {
|
||||
# Procedure called to validate PULSE_13_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_13_PERIOD { PARAM_VALUE.PULSE_13_PERIOD } {
|
||||
# Procedure called to update PULSE_13_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_13_PERIOD { PARAM_VALUE.PULSE_13_PERIOD } {
|
||||
# Procedure called to validate PULSE_13_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_13_WIDTH { PARAM_VALUE.PULSE_13_WIDTH } {
|
||||
# Procedure called to update PULSE_13_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_13_WIDTH { PARAM_VALUE.PULSE_13_WIDTH } {
|
||||
# Procedure called to validate PULSE_13_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_14_OFFSET { PARAM_VALUE.PULSE_14_OFFSET } {
|
||||
# Procedure called to update PULSE_14_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_14_OFFSET { PARAM_VALUE.PULSE_14_OFFSET } {
|
||||
# Procedure called to validate PULSE_14_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_14_PERIOD { PARAM_VALUE.PULSE_14_PERIOD } {
|
||||
# Procedure called to update PULSE_14_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_14_PERIOD { PARAM_VALUE.PULSE_14_PERIOD } {
|
||||
# Procedure called to validate PULSE_14_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_14_WIDTH { PARAM_VALUE.PULSE_14_WIDTH } {
|
||||
# Procedure called to update PULSE_14_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_14_WIDTH { PARAM_VALUE.PULSE_14_WIDTH } {
|
||||
# Procedure called to validate PULSE_14_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_15_OFFSET { PARAM_VALUE.PULSE_15_OFFSET } {
|
||||
# Procedure called to update PULSE_15_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_15_OFFSET { PARAM_VALUE.PULSE_15_OFFSET } {
|
||||
# Procedure called to validate PULSE_15_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_15_PERIOD { PARAM_VALUE.PULSE_15_PERIOD } {
|
||||
# Procedure called to update PULSE_15_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_15_PERIOD { PARAM_VALUE.PULSE_15_PERIOD } {
|
||||
# Procedure called to validate PULSE_15_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_15_WIDTH { PARAM_VALUE.PULSE_15_WIDTH } {
|
||||
# Procedure called to update PULSE_15_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_15_WIDTH { PARAM_VALUE.PULSE_15_WIDTH } {
|
||||
# Procedure called to validate PULSE_15_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_1_OFFSET { PARAM_VALUE.PULSE_1_OFFSET } {
|
||||
# Procedure called to update PULSE_1_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_1_OFFSET { PARAM_VALUE.PULSE_1_OFFSET } {
|
||||
# Procedure called to validate PULSE_1_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_1_PERIOD { PARAM_VALUE.PULSE_1_PERIOD } {
|
||||
# Procedure called to update PULSE_1_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_1_PERIOD { PARAM_VALUE.PULSE_1_PERIOD } {
|
||||
# Procedure called to validate PULSE_1_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_1_WIDTH { PARAM_VALUE.PULSE_1_WIDTH } {
|
||||
# Procedure called to update PULSE_1_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_1_WIDTH { PARAM_VALUE.PULSE_1_WIDTH } {
|
||||
# Procedure called to validate PULSE_1_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_2_OFFSET { PARAM_VALUE.PULSE_2_OFFSET } {
|
||||
# Procedure called to update PULSE_2_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_2_OFFSET { PARAM_VALUE.PULSE_2_OFFSET } {
|
||||
# Procedure called to validate PULSE_2_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_2_PERIOD { PARAM_VALUE.PULSE_2_PERIOD } {
|
||||
# Procedure called to update PULSE_2_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_2_PERIOD { PARAM_VALUE.PULSE_2_PERIOD } {
|
||||
# Procedure called to validate PULSE_2_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_2_WIDTH { PARAM_VALUE.PULSE_2_WIDTH } {
|
||||
# Procedure called to update PULSE_2_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_2_WIDTH { PARAM_VALUE.PULSE_2_WIDTH } {
|
||||
# Procedure called to validate PULSE_2_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_3_OFFSET { PARAM_VALUE.PULSE_3_OFFSET } {
|
||||
# Procedure called to update PULSE_3_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_3_OFFSET { PARAM_VALUE.PULSE_3_OFFSET } {
|
||||
# Procedure called to validate PULSE_3_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_3_PERIOD { PARAM_VALUE.PULSE_3_PERIOD } {
|
||||
# Procedure called to update PULSE_3_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_3_PERIOD { PARAM_VALUE.PULSE_3_PERIOD } {
|
||||
# Procedure called to validate PULSE_3_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_3_WIDTH { PARAM_VALUE.PULSE_3_WIDTH } {
|
||||
# Procedure called to update PULSE_3_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_3_WIDTH { PARAM_VALUE.PULSE_3_WIDTH } {
|
||||
# Procedure called to validate PULSE_3_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_4_OFFSET { PARAM_VALUE.PULSE_4_OFFSET } {
|
||||
# Procedure called to update PULSE_4_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_4_OFFSET { PARAM_VALUE.PULSE_4_OFFSET } {
|
||||
# Procedure called to validate PULSE_4_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_4_PERIOD { PARAM_VALUE.PULSE_4_PERIOD } {
|
||||
# Procedure called to update PULSE_4_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_4_PERIOD { PARAM_VALUE.PULSE_4_PERIOD } {
|
||||
# Procedure called to validate PULSE_4_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_4_WIDTH { PARAM_VALUE.PULSE_4_WIDTH } {
|
||||
# Procedure called to update PULSE_4_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_4_WIDTH { PARAM_VALUE.PULSE_4_WIDTH } {
|
||||
# Procedure called to validate PULSE_4_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_5_OFFSET { PARAM_VALUE.PULSE_5_OFFSET } {
|
||||
# Procedure called to update PULSE_5_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_5_OFFSET { PARAM_VALUE.PULSE_5_OFFSET } {
|
||||
# Procedure called to validate PULSE_5_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_5_PERIOD { PARAM_VALUE.PULSE_5_PERIOD } {
|
||||
# Procedure called to update PULSE_5_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_5_PERIOD { PARAM_VALUE.PULSE_5_PERIOD } {
|
||||
# Procedure called to validate PULSE_5_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_5_WIDTH { PARAM_VALUE.PULSE_5_WIDTH } {
|
||||
# Procedure called to update PULSE_5_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_5_WIDTH { PARAM_VALUE.PULSE_5_WIDTH } {
|
||||
# Procedure called to validate PULSE_5_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_6_OFFSET { PARAM_VALUE.PULSE_6_OFFSET } {
|
||||
# Procedure called to update PULSE_6_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_6_OFFSET { PARAM_VALUE.PULSE_6_OFFSET } {
|
||||
# Procedure called to validate PULSE_6_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_6_PERIOD { PARAM_VALUE.PULSE_6_PERIOD } {
|
||||
# Procedure called to update PULSE_6_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_6_PERIOD { PARAM_VALUE.PULSE_6_PERIOD } {
|
||||
# Procedure called to validate PULSE_6_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_6_WIDTH { PARAM_VALUE.PULSE_6_WIDTH } {
|
||||
# Procedure called to update PULSE_6_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_6_WIDTH { PARAM_VALUE.PULSE_6_WIDTH } {
|
||||
# Procedure called to validate PULSE_6_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_7_OFFSET { PARAM_VALUE.PULSE_7_OFFSET } {
|
||||
# Procedure called to update PULSE_7_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_7_OFFSET { PARAM_VALUE.PULSE_7_OFFSET } {
|
||||
# Procedure called to validate PULSE_7_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_7_PERIOD { PARAM_VALUE.PULSE_7_PERIOD } {
|
||||
# Procedure called to update PULSE_7_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_7_PERIOD { PARAM_VALUE.PULSE_7_PERIOD } {
|
||||
# Procedure called to validate PULSE_7_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_7_WIDTH { PARAM_VALUE.PULSE_7_WIDTH } {
|
||||
# Procedure called to update PULSE_7_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_7_WIDTH { PARAM_VALUE.PULSE_7_WIDTH } {
|
||||
# Procedure called to validate PULSE_7_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_8_OFFSET { PARAM_VALUE.PULSE_8_OFFSET } {
|
||||
# Procedure called to update PULSE_8_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_8_OFFSET { PARAM_VALUE.PULSE_8_OFFSET } {
|
||||
# Procedure called to validate PULSE_8_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_8_PERIOD { PARAM_VALUE.PULSE_8_PERIOD } {
|
||||
# Procedure called to update PULSE_8_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_8_PERIOD { PARAM_VALUE.PULSE_8_PERIOD } {
|
||||
# Procedure called to validate PULSE_8_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_8_WIDTH { PARAM_VALUE.PULSE_8_WIDTH } {
|
||||
# Procedure called to update PULSE_8_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_8_WIDTH { PARAM_VALUE.PULSE_8_WIDTH } {
|
||||
# Procedure called to validate PULSE_8_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_9_OFFSET { PARAM_VALUE.PULSE_9_OFFSET } {
|
||||
# Procedure called to update PULSE_9_OFFSET when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_9_OFFSET { PARAM_VALUE.PULSE_9_OFFSET } {
|
||||
# Procedure called to validate PULSE_9_OFFSET
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_9_PERIOD { PARAM_VALUE.PULSE_9_PERIOD } {
|
||||
# Procedure called to update PULSE_9_PERIOD when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_9_PERIOD { PARAM_VALUE.PULSE_9_PERIOD } {
|
||||
# Procedure called to validate PULSE_9_PERIOD
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PULSE_9_WIDTH { PARAM_VALUE.PULSE_9_WIDTH } {
|
||||
# Procedure called to update PULSE_9_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PULSE_9_WIDTH { PARAM_VALUE.PULSE_9_WIDTH } {
|
||||
# Procedure called to validate PULSE_9_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.PWM_EXT_SYNC { PARAM_VALUE.PWM_EXT_SYNC } {
|
||||
# Procedure called to update PWM_EXT_SYNC when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.PWM_EXT_SYNC { PARAM_VALUE.PWM_EXT_SYNC } {
|
||||
# Procedure called to validate PWM_EXT_SYNC
|
||||
return true
|
||||
}
|
||||
|
||||
|
||||
proc update_MODELPARAM_VALUE.ID { MODELPARAM_VALUE.ID PARAM_VALUE.ID } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.ID}] ${MODELPARAM_VALUE.ID}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.ASYNC_CLK_EN { MODELPARAM_VALUE.ASYNC_CLK_EN PARAM_VALUE.ASYNC_CLK_EN } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.ASYNC_CLK_EN}] ${MODELPARAM_VALUE.ASYNC_CLK_EN}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.N_PWMS { MODELPARAM_VALUE.N_PWMS PARAM_VALUE.N_PWMS } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.N_PWMS}] ${MODELPARAM_VALUE.N_PWMS}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PWM_EXT_SYNC { MODELPARAM_VALUE.PWM_EXT_SYNC PARAM_VALUE.PWM_EXT_SYNC } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PWM_EXT_SYNC}] ${MODELPARAM_VALUE.PWM_EXT_SYNC}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.EXT_ASYNC_SYNC { MODELPARAM_VALUE.EXT_ASYNC_SYNC PARAM_VALUE.EXT_ASYNC_SYNC } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.EXT_ASYNC_SYNC}] ${MODELPARAM_VALUE.EXT_ASYNC_SYNC}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_0_WIDTH { MODELPARAM_VALUE.PULSE_0_WIDTH PARAM_VALUE.PULSE_0_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_0_WIDTH}] ${MODELPARAM_VALUE.PULSE_0_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_1_WIDTH { MODELPARAM_VALUE.PULSE_1_WIDTH PARAM_VALUE.PULSE_1_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_1_WIDTH}] ${MODELPARAM_VALUE.PULSE_1_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_2_WIDTH { MODELPARAM_VALUE.PULSE_2_WIDTH PARAM_VALUE.PULSE_2_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_2_WIDTH}] ${MODELPARAM_VALUE.PULSE_2_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_3_WIDTH { MODELPARAM_VALUE.PULSE_3_WIDTH PARAM_VALUE.PULSE_3_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_3_WIDTH}] ${MODELPARAM_VALUE.PULSE_3_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_4_WIDTH { MODELPARAM_VALUE.PULSE_4_WIDTH PARAM_VALUE.PULSE_4_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_4_WIDTH}] ${MODELPARAM_VALUE.PULSE_4_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_5_WIDTH { MODELPARAM_VALUE.PULSE_5_WIDTH PARAM_VALUE.PULSE_5_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_5_WIDTH}] ${MODELPARAM_VALUE.PULSE_5_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_6_WIDTH { MODELPARAM_VALUE.PULSE_6_WIDTH PARAM_VALUE.PULSE_6_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_6_WIDTH}] ${MODELPARAM_VALUE.PULSE_6_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_7_WIDTH { MODELPARAM_VALUE.PULSE_7_WIDTH PARAM_VALUE.PULSE_7_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_7_WIDTH}] ${MODELPARAM_VALUE.PULSE_7_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_8_WIDTH { MODELPARAM_VALUE.PULSE_8_WIDTH PARAM_VALUE.PULSE_8_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_8_WIDTH}] ${MODELPARAM_VALUE.PULSE_8_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_9_WIDTH { MODELPARAM_VALUE.PULSE_9_WIDTH PARAM_VALUE.PULSE_9_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_9_WIDTH}] ${MODELPARAM_VALUE.PULSE_9_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_10_WIDTH { MODELPARAM_VALUE.PULSE_10_WIDTH PARAM_VALUE.PULSE_10_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_10_WIDTH}] ${MODELPARAM_VALUE.PULSE_10_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_11_WIDTH { MODELPARAM_VALUE.PULSE_11_WIDTH PARAM_VALUE.PULSE_11_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_11_WIDTH}] ${MODELPARAM_VALUE.PULSE_11_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_12_WIDTH { MODELPARAM_VALUE.PULSE_12_WIDTH PARAM_VALUE.PULSE_12_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_12_WIDTH}] ${MODELPARAM_VALUE.PULSE_12_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_13_WIDTH { MODELPARAM_VALUE.PULSE_13_WIDTH PARAM_VALUE.PULSE_13_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_13_WIDTH}] ${MODELPARAM_VALUE.PULSE_13_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_14_WIDTH { MODELPARAM_VALUE.PULSE_14_WIDTH PARAM_VALUE.PULSE_14_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_14_WIDTH}] ${MODELPARAM_VALUE.PULSE_14_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_15_WIDTH { MODELPARAM_VALUE.PULSE_15_WIDTH PARAM_VALUE.PULSE_15_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_15_WIDTH}] ${MODELPARAM_VALUE.PULSE_15_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_0_PERIOD { MODELPARAM_VALUE.PULSE_0_PERIOD PARAM_VALUE.PULSE_0_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_0_PERIOD}] ${MODELPARAM_VALUE.PULSE_0_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_1_PERIOD { MODELPARAM_VALUE.PULSE_1_PERIOD PARAM_VALUE.PULSE_1_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_1_PERIOD}] ${MODELPARAM_VALUE.PULSE_1_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_2_PERIOD { MODELPARAM_VALUE.PULSE_2_PERIOD PARAM_VALUE.PULSE_2_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_2_PERIOD}] ${MODELPARAM_VALUE.PULSE_2_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_3_PERIOD { MODELPARAM_VALUE.PULSE_3_PERIOD PARAM_VALUE.PULSE_3_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_3_PERIOD}] ${MODELPARAM_VALUE.PULSE_3_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_4_PERIOD { MODELPARAM_VALUE.PULSE_4_PERIOD PARAM_VALUE.PULSE_4_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_4_PERIOD}] ${MODELPARAM_VALUE.PULSE_4_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_5_PERIOD { MODELPARAM_VALUE.PULSE_5_PERIOD PARAM_VALUE.PULSE_5_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_5_PERIOD}] ${MODELPARAM_VALUE.PULSE_5_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_6_PERIOD { MODELPARAM_VALUE.PULSE_6_PERIOD PARAM_VALUE.PULSE_6_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_6_PERIOD}] ${MODELPARAM_VALUE.PULSE_6_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_7_PERIOD { MODELPARAM_VALUE.PULSE_7_PERIOD PARAM_VALUE.PULSE_7_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_7_PERIOD}] ${MODELPARAM_VALUE.PULSE_7_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_8_PERIOD { MODELPARAM_VALUE.PULSE_8_PERIOD PARAM_VALUE.PULSE_8_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_8_PERIOD}] ${MODELPARAM_VALUE.PULSE_8_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_9_PERIOD { MODELPARAM_VALUE.PULSE_9_PERIOD PARAM_VALUE.PULSE_9_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_9_PERIOD}] ${MODELPARAM_VALUE.PULSE_9_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_10_PERIOD { MODELPARAM_VALUE.PULSE_10_PERIOD PARAM_VALUE.PULSE_10_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_10_PERIOD}] ${MODELPARAM_VALUE.PULSE_10_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_11_PERIOD { MODELPARAM_VALUE.PULSE_11_PERIOD PARAM_VALUE.PULSE_11_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_11_PERIOD}] ${MODELPARAM_VALUE.PULSE_11_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_12_PERIOD { MODELPARAM_VALUE.PULSE_12_PERIOD PARAM_VALUE.PULSE_12_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_12_PERIOD}] ${MODELPARAM_VALUE.PULSE_12_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_13_PERIOD { MODELPARAM_VALUE.PULSE_13_PERIOD PARAM_VALUE.PULSE_13_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_13_PERIOD}] ${MODELPARAM_VALUE.PULSE_13_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_14_PERIOD { MODELPARAM_VALUE.PULSE_14_PERIOD PARAM_VALUE.PULSE_14_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_14_PERIOD}] ${MODELPARAM_VALUE.PULSE_14_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_15_PERIOD { MODELPARAM_VALUE.PULSE_15_PERIOD PARAM_VALUE.PULSE_15_PERIOD } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_15_PERIOD}] ${MODELPARAM_VALUE.PULSE_15_PERIOD}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_0_OFFSET { MODELPARAM_VALUE.PULSE_0_OFFSET PARAM_VALUE.PULSE_0_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_0_OFFSET}] ${MODELPARAM_VALUE.PULSE_0_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_1_OFFSET { MODELPARAM_VALUE.PULSE_1_OFFSET PARAM_VALUE.PULSE_1_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_1_OFFSET}] ${MODELPARAM_VALUE.PULSE_1_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_2_OFFSET { MODELPARAM_VALUE.PULSE_2_OFFSET PARAM_VALUE.PULSE_2_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_2_OFFSET}] ${MODELPARAM_VALUE.PULSE_2_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_3_OFFSET { MODELPARAM_VALUE.PULSE_3_OFFSET PARAM_VALUE.PULSE_3_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_3_OFFSET}] ${MODELPARAM_VALUE.PULSE_3_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_4_OFFSET { MODELPARAM_VALUE.PULSE_4_OFFSET PARAM_VALUE.PULSE_4_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_4_OFFSET}] ${MODELPARAM_VALUE.PULSE_4_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_5_OFFSET { MODELPARAM_VALUE.PULSE_5_OFFSET PARAM_VALUE.PULSE_5_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_5_OFFSET}] ${MODELPARAM_VALUE.PULSE_5_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_6_OFFSET { MODELPARAM_VALUE.PULSE_6_OFFSET PARAM_VALUE.PULSE_6_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_6_OFFSET}] ${MODELPARAM_VALUE.PULSE_6_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_7_OFFSET { MODELPARAM_VALUE.PULSE_7_OFFSET PARAM_VALUE.PULSE_7_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_7_OFFSET}] ${MODELPARAM_VALUE.PULSE_7_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_8_OFFSET { MODELPARAM_VALUE.PULSE_8_OFFSET PARAM_VALUE.PULSE_8_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_8_OFFSET}] ${MODELPARAM_VALUE.PULSE_8_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_9_OFFSET { MODELPARAM_VALUE.PULSE_9_OFFSET PARAM_VALUE.PULSE_9_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_9_OFFSET}] ${MODELPARAM_VALUE.PULSE_9_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_10_OFFSET { MODELPARAM_VALUE.PULSE_10_OFFSET PARAM_VALUE.PULSE_10_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_10_OFFSET}] ${MODELPARAM_VALUE.PULSE_10_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_11_OFFSET { MODELPARAM_VALUE.PULSE_11_OFFSET PARAM_VALUE.PULSE_11_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_11_OFFSET}] ${MODELPARAM_VALUE.PULSE_11_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_12_OFFSET { MODELPARAM_VALUE.PULSE_12_OFFSET PARAM_VALUE.PULSE_12_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_12_OFFSET}] ${MODELPARAM_VALUE.PULSE_12_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_13_OFFSET { MODELPARAM_VALUE.PULSE_13_OFFSET PARAM_VALUE.PULSE_13_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_13_OFFSET}] ${MODELPARAM_VALUE.PULSE_13_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_14_OFFSET { MODELPARAM_VALUE.PULSE_14_OFFSET PARAM_VALUE.PULSE_14_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_14_OFFSET}] ${MODELPARAM_VALUE.PULSE_14_OFFSET}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.PULSE_15_OFFSET { MODELPARAM_VALUE.PULSE_15_OFFSET PARAM_VALUE.PULSE_15_OFFSET } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.PULSE_15_OFFSET}] ${MODELPARAM_VALUE.PULSE_15_OFFSET}
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user