ZoroGH/MM7020
1
0
Fork 0
Code Issues 2 Pull Requests Actions Packages Projects Releases 3 Wiki Activity

feat(top): new (de)scrambler, crc16

Browse Source
This commit is contained in:
ZoroGH
2024-08-13 22:07:58 +08:00
parent a4eb609aae
commit 5e8d69a0b0
13 changed files with 766 additions and 90 deletions
Download Patch File Download Diff File Expand all files Collapse all files
coe/bram_scramble.coe
+11
View File
@@ -0,0 +1,11 @@
memory_initialization_radix=2;
memory_initialization_vector=
01010101111100101000010011111111
11111010011001101010001100000111
00101001010100111011101100111101
01100011110011100110001011010010
01111101101111010111010001000011
10010000010101101101011001011000
00010010111000000110010010011011
00000101111000110100000001000111
;
hdl/RecvTop.v
+27 -11
View File
@@ -20,28 +20,33 @@
//////////////////////////////////////////////////////////////////////////////////
module RecvTop (
input clk,
input clk_2x, // clk_2x
input clk_2x, // clk_2x
input clk_4x,
input rst,
input rst2, // TODO： delete the signal
input rst2, // TODO： delete the signal
// phy wave
input [11:0] dini,
input [11:0] dinq,
// mgc control
output [ 3:0] ad9361_ctrl_in,
output wire flag_mgc_done_pulse, // active high pulse signal
output wire frame_sync_pulse, // in domain clk
output wire flag_mgc_done_pulse, // active high pulse signal
output wire frame_sync_pulse, // in domain clk
//vio
input vio_tsync_inter16, //为1的时候启用内插，从16倍过采样中挑一路
input EQUenable_vio, //为1时启用均衡
input [ 7:0] Zerozone_vio, //零域估计，默认值为8'd29
input [ 6:0] vio_stopbit, //寻找停止位，默认值为7'd60
input vio_tsync_inter16, //为1的时候启用内插，从16倍过采样中挑一路
input EQUenable_vio, //为1时启用均衡
input [ 7:0] Zerozone_vio, //零域估计，默认值为8'd29
input [ 6:0] vio_stopbit, //寻找停止位，默认值为7'd60
// stop signal
output flag_stop, //给shx，拉高8个clk表示当前时帧有效数据接收完毕
output [16:0] addr_stop, //给shx，拉高8个clk,与flag_stop对齐，指示位置与最后1bit有效数据的位置对齐
output flag_stop, //给shx，拉高8个clk表示当前时帧有效数据接收完毕
output [16:0] addr_stop, //给shx，拉高8个clk,与flag_stop对齐，指示位置与最后1bit有效数据的位置对齐
// mac frame header
output [63:0] recvNetData,
output recvNetDataNd
output recvNetDataNd,
// rx data src
output wire [31:0] rx_data_src_fifo_tdata,
output wire rx_data_src_fifo_tlast,
input wire rx_data_src_fifo_tready,
output wire rx_data_src_fifo_tvalid
);
wire rst_TimeSync;
@@ -495,6 +500,17 @@ module RecvTop (
.total_frames(total_frames)
);
extract_mac_frame u_extract_mac_frame (
.clk (clk_2x),
.rst (rst2 || rst_frame_sync || ~flag_frame_sync),
.ldpc_dec_out_start (LDPC_SyncOut),
.ldpc_dec_out_valid (LDPC_Rdy),
.ldpc_dec_out_data (LDPC_Dout),
.m_axis_mac_frame_tvalid(rx_data_src_fifo_tvalid),
.m_axis_mac_frame_tdata (rx_data_src_fifo_tdata),
.m_axis_mac_frame_tready(rx_data_src_fifo_tready),
.m_axis_mac_frame_tlast (rx_data_src_fifo_tlast)
);
hdl/descrambler.v
+161
View File
@@ -0,0 +1,161 @@
// * Engineer:
// * *************************************************** *
// * ███████╗ ██████╗ ██████╗ ██████╗ ██████╗ ██╗ ██╗ *
// * ╚══███╔╝██╔═══██╗██╔══██╗██╔═══██╗██╔════╝ ██║ ██║ *
// * ███╔╝ ██║ ██║██████╔╝██║ ██║██║ ███╗███████║ *
// * ███╔╝ ██║ ██║██╔══██╗██║ ██║██║ ██║██╔══██║ *
// * ███████╗╚██████╔╝██║ ██║╚██████╔╝╚██████╔╝██║ ██║ *
// * ╚══════╝ ╚═════╝ ╚═╝ ╚═╝ ╚═════╝ ╚═════╝ ╚═╝ ╚═╝ *
// * *************************************************** *
// * Update Date:
// * NOTE :
module scrambler #(
parameter ILA_ON = 0
) (
input clk,
input rst_n,
// s_axis_stream
input [31:0] s_axis_tdata,
input s_axis_tvalid,
output reg s_axis_tready,
input s_axis_tlast,
input [31:0] s_axis_rd_data_count,
// m_axis_stream
output reg [31:0] m_axis_tdata,
output reg m_axis_tvalid,
input m_axis_tready,
output reg m_axis_tlast
);
// ******** Wire & Reg ********
wire rst;
reg [ 2:0] addr_scramble = 0;
reg [ 2:0] addr_scramble_d1 = 0;
reg [ 2:0] addr_scramble_d2 = 0;
wire [31:0] data_scramble_mask;
reg [ 3:0] cnt_in;
reg [31:0] s_axis_tdata_d1;
reg [31:0] s_axis_tdata_d2;
reg s_axis_tready_d1;
reg s_axis_tlast_d1;
// fsm
reg [ 1:0] cs = 0;
reg [ 1:0] ns = 0;
localparam S_IDLE = 0;
localparam S_WORKING = 1;
// ******** Assingment ********
assign rst = ~rst_n;
// ******** Logic Block ********
always @(posedge clk) begin
cs <= ns;
end
always @(*) begin
ns = cs;
case (cs)
S_IDLE: begin
if (s_axis_tvalid && m_axis_tready && s_axis_rd_data_count >= 16) begin
ns = S_WORKING;
end
end
S_WORKING: begin
if (addr_scramble_d2 == 3'h7) begin
ns = S_IDLE;
end
end
default: begin
ns = S_IDLE;
end
endcase
end
always @(posedge clk) begin
if (cs == S_IDLE) begin
addr_scramble <= 0;
end
else begin
addr_scramble <= addr_scramble + 1;
end
addr_scramble_d1 <= addr_scramble;
addr_scramble_d2 <= addr_scramble_d1;
end
always @(posedge clk) begin
if (cs == S_WORKING) begin
m_axis_tdata <= s_axis_tdata_d1 ^ data_scramble_mask;
end
else begin
m_axis_tdata <= 0;
end
end
always @(posedge clk) begin
if (cs == S_WORKING && s_axis_tvalid && cnt_in < 4'd8) begin
s_axis_tready <= 1;
end
else begin
s_axis_tready <= 0;
end
end
always @(posedge clk) begin
s_axis_tdata_d1 <= s_axis_tdata;
s_axis_tready_d1 <= s_axis_tready;
m_axis_tvalid <= s_axis_tready_d1;
s_axis_tlast_d1 <= s_axis_tlast;
m_axis_tlast <= s_axis_tlast_d1;
end
always @(posedge clk) begin
if (cs == S_IDLE) begin
cnt_in <= 0;
end
else if (cs == S_WORKING && cnt_in < 4'd8) begin
cnt_in <= cnt_in + 1;
end
end
// ******** Inst ********
bram_scramble u_bram_scramble (
.clka (clk), // input wire clka
.addra(addr_scramble), // input wire [2 : 0] addra
.douta(data_scramble_mask) // output wire [31 : 0] douta
);
// ******** Debug ********
generate
if (ILA_ON)
ila_scrambler u_ila_scrambler (
.clk (clk), // input wire clk
.probe0(s_axis_tvalid), // input wire [0:0] probe0
.probe1(s_axis_tready), // input wire [0:0] probe1
.probe2(s_axis_tdata), // input wire [31:0] probe2
.probe3(s_axis_tlast), // input wire [0:0] probe3
.probe4(m_axis_tvalid), // input wire [0:0] probe4
.probe5(m_axis_tready), // input wire [0:0] probe5
.probe6(m_axis_tdata), // input wire [31:0] probe6
.probe7(m_axis_tlast), // input wire [0:0] probe7
.probe8(data_scramble_mask) // input wire [31:0] probe8
);
endgenerate
endmodule
hdl/enc_control.v
+14
View File
@@ -338,4 +338,18 @@ module enc_control #(
// ******** Debug ********
// ila_enc_control u_ila_enc_control (
// .clk (clk),
// .probe0(s_axis_fifo_tvalid), // width: 1
// .probe1(s_axis_fifo_tready), // width: 1
// .probe2(s_axis_fifo_tdata), // width: 32
// .probe3(data_src_count), // width: 32
// .probe4(cs), // width: 4
// .probe5(wc_data_in_ready), // width: 1
// .probe6(wc_data_in_valid), // width: 1
// .probe7(wc_data_out_valid), // width: 1
// .probe8(data_add_prefix_in_ready), // width: 1
// .probe9(data_add_prefix_out_valid) // width: 1
// );
endmodule
hdl/extract_mac_frame.v
+82
View File
@@ -0,0 +1,82 @@
module extract_mac_frame (
input clk,
input rst,
// ldpc out
input ldpc_dec_out_start,
input ldpc_dec_out_valid,
input ldpc_dec_out_data,
// axis
output wire m_axis_mac_frame_tvalid,
output wire [31:0] m_axis_mac_frame_tdata,
input m_axis_mac_frame_tready,
output reg m_axis_mac_frame_tlast
);
// NOTE: module 1bit --> 32bit
// transfer 1bit serial to 32bit and sent to axis fifo
//
localparam MAC_FRAME_LEN_BIT = 107520;
localparam MAC_FRAME_LEN_BYTE = 13440;
localparam MAC_FRAME_LEN_QUAD_BYTE = 3360;
// ******** Wire & Reg ********
reg [15:0] cnt_axis_out;
wire flag_handshake;
// serial input
wire ser;
wire ser_valid;
wire [31:0] par;
wire par_valid;
// ******** Assingment ********
assign ser = ldpc_dec_out_data;
assign ser_valid = ldpc_dec_out_valid;
assign m_axis_mac_frame_tvalid = par_valid;
assign m_axis_mac_frame_tdata = par;
assign flag_handshake = m_axis_mac_frame_tvalid & m_axis_mac_frame_tready;
// ******** Logic Block ********
always @(posedge clk) begin
if (rst) begin
cnt_axis_out <= 0;
end
else if (flag_handshake) begin
cnt_axis_out <= cnt_axis_out + 1;
end
end
always @(*) begin
if (cnt_axis_out == MAC_FRAME_LEN_QUAD_BYTE - 1 && flag_handshake) begin
m_axis_mac_frame_tlast = 1;
end
else begin
m_axis_mac_frame_tlast = 0;
end
end
// ******** Inst ********
// serial 1bit --> 32bit
ser2par u_ser2par (
.clk (clk),
.rst (rst),
.ser (ser),
.ser_valid(ser_valid),
.par (par),
.par_valid(par_valid)
);
// ******** Debug ********
endmodule
hdl/phy_control.v
+5
View File
@@ -389,6 +389,11 @@ module phy_control #(
assign tdma_tic_2_ps = tdma_tic_2_ps_reg;
vio_phy_param u_vio_phy_param (
.clk (local_clk),
.probe_in0(phy_cr_reg)
);
//--- ADD YOUR OWN LOGIC END
hdl/scrambler.v
+161
View File
@@ -0,0 +1,161 @@
// * Engineer:
// * *************************************************** *
// * ███████╗ ██████╗ ██████╗ ██████╗ ██████╗ ██╗ ██╗ *
// * ╚══███╔╝██╔═══██╗██╔══██╗██╔═══██╗██╔════╝ ██║ ██║ *
// * ███╔╝ ██║ ██║██████╔╝██║ ██║██║ ███╗███████║ *
// * ███╔╝ ██║ ██║██╔══██╗██║ ██║██║ ██║██╔══██║ *
// * ███████╗╚██████╔╝██║ ██║╚██████╔╝╚██████╔╝██║ ██║ *
// * ╚══════╝ ╚═════╝ ╚═╝ ╚═╝ ╚═════╝ ╚═════╝ ╚═╝ ╚═╝ *
// * *************************************************** *
// * Update Date:
// * NOTE :
module scrambler #(
parameter ILA_ON = 0
) (
input clk,
input rst_n,
// s_axis_stream
input [31:0] s_axis_tdata,
input s_axis_tvalid,
output reg s_axis_tready,
input s_axis_tlast,
input [31:0] s_axis_rd_data_count,
// m_axis_stream
output reg [31:0] m_axis_tdata,
output reg m_axis_tvalid,
input m_axis_tready,
output reg m_axis_tlast
);
// ******** Wire & Reg ********
wire rst;
reg [ 2:0] addr_scramble = 0;
reg [ 2:0] addr_scramble_d1 = 0;
reg [ 2:0] addr_scramble_d2 = 0;
wire [31:0] data_scramble_mask;
reg [ 3:0] cnt_in;
reg [31:0] s_axis_tdata_d1;
reg [31:0] s_axis_tdata_d2;
reg s_axis_tready_d1;
reg s_axis_tlast_d1;
// fsm
reg [ 1:0] cs = 0;
reg [ 1:0] ns = 0;
localparam S_IDLE = 0;
localparam S_WORKING = 1;
// ******** Assingment ********
assign rst = ~rst_n;
// ******** Logic Block ********
always @(posedge clk) begin
cs <= ns;
end
always @(*) begin
ns = cs;
case (cs)
S_IDLE: begin
if (s_axis_tvalid && m_axis_tready && s_axis_rd_data_count >= 8) begin
ns = S_WORKING;
end
end
S_WORKING: begin
if (addr_scramble_d2 == 3'h7) begin
ns = S_IDLE;
end
end
default: begin
ns = S_IDLE;
end
endcase
end
always @(posedge clk) begin
if (cs == S_IDLE) begin
addr_scramble <= 0;
end
else begin
addr_scramble <= addr_scramble + 1;
end
addr_scramble_d1 <= addr_scramble;
addr_scramble_d2 <= addr_scramble_d1;
end
always @(posedge clk) begin
if (cs == S_WORKING) begin
m_axis_tdata <= s_axis_tdata_d1 ^ data_scramble_mask;
end
else begin
m_axis_tdata <= 0;
end
end
always @(posedge clk) begin
if (cs == S_WORKING && s_axis_tvalid && cnt_in < 4'd8) begin
s_axis_tready <= 1;
end
else begin
s_axis_tready <= 0;
end
end
always @(posedge clk) begin
s_axis_tdata_d1 <= s_axis_tdata;
s_axis_tready_d1 <= s_axis_tready;
m_axis_tvalid <= s_axis_tready_d1;
s_axis_tlast_d1 <= s_axis_tlast;
m_axis_tlast <= s_axis_tlast_d1;
end
always @(posedge clk) begin
if (cs == S_IDLE) begin
cnt_in <= 0;
end
else if (cs == S_WORKING && cnt_in < 4'd8) begin
cnt_in <= cnt_in + 1;
end
end
// ******** Inst ********
bram_scramble u_bram_scramble (
.clka (clk), // input wire clka
.addra(addr_scramble), // input wire [2 : 0] addra
.douta(data_scramble_mask) // output wire [31 : 0] douta
);
// ******** Debug ********
generate
if (ILA_ON)
ila_scrambler u_ila_scrambler (
.clk (clk), // input wire clk
.probe0(s_axis_tvalid), // input wire [0:0] probe0
.probe1(s_axis_tready), // input wire [0:0] probe1
.probe2(s_axis_tdata), // input wire [31:0] probe2
.probe3(s_axis_tlast), // input wire [0:0] probe3
.probe4(m_axis_tvalid), // input wire [0:0] probe4
.probe5(m_axis_tready), // input wire [0:0] probe5
.probe6(m_axis_tdata), // input wire [31:0] probe6
.probe7(m_axis_tlast), // input wire [0:0] probe7
.probe8(data_scramble_mask) // input wire [31:0] probe8
);
endgenerate
endmodule
hdl/ser2par.v
+61
View File
@@ -0,0 +1,61 @@
module ser2par #(
parameter PAR_WIDTH = 32
) (
input clk,
input rst,
input wire ser,
input wire ser_valid,
output reg [PAR_WIDTH -1:0] par,
output reg par_valid
);
// ******** Wire & Reg ********
reg [$clog2(PAR_WIDTH):0] cnt_idx;
// ******** Assingment ********
// ******** Logic Block ********
always @(posedge clk) begin
if (rst) begin
cnt_idx <= 0;
end
else if (ser_valid) begin
if (cnt_idx == PAR_WIDTH - 1) begin // force it return to 0
cnt_idx <= 0;
end
else begin
cnt_idx <= cnt_idx + 1;
end
end
end
always @(posedge clk) begin
if (rst) begin
par <= 0;
end
else if (ser_valid) begin
par[cnt_idx] <= ser;
end
end
always @(posedge clk) begin
if (cnt_idx == PAR_WIDTH - 1) begin
par_valid <= 1;
end
else begin
par_valid <= 0;
end
end
// ******** Inst ********
// ******** Debug ********
endmodule
hdl/system_top.v
+100 -76
View File
@@ -90,6 +90,11 @@ module system_top (
// tx signal
wire tx_test_flag;
wire flag_mgc_done_pulse;
// rx bus
wire [31:0] rx_data_src_fifo_tdata;
wire rx_data_src_fifo_tlast;
wire rx_data_src_fifo_tready;
wire rx_data_src_fifo_tvalid;
// baseband signal
wire [11:0] ad9361_rx_data_i;
@@ -132,6 +137,7 @@ module system_top (
// vio
wire rst_manual;
wire rx_rst_vio;
wire [ 7:0] node_id;
wire intr_2ps;
wire [ 7:0] max_slot_num;
@@ -178,71 +184,78 @@ module system_top (
);
MM7020_BD_wrapper u_MM7020_BD_wrapper (
.ad9361_spi_clk (ad9361_spi_clk),
.ad9361_spi_csn (ad9361_spi_csn),
.ad9361_spi_miso (ad9361_spi_miso),
.ad9361_spi_mosi (ad9361_spi_mosi),
.clk_ps (clk_poweron),
.rst_ps (rst_sys),
.ad9361_spi_clk (ad9361_spi_clk),
.ad9361_spi_csn (ad9361_spi_csn),
.ad9361_spi_miso (ad9361_spi_miso),
.ad9361_spi_mosi (ad9361_spi_mosi),
.clk_ps (clk_poweron),
.rst_ps (rst_sys),
// ddr
.ddr_addr (ddr_addr),
.ddr_ba (ddr_ba),
.ddr_cas_n (ddr_cas_n),
.ddr_ck_n (ddr_ck_n),
.ddr_ck_p (ddr_ck_p),
.ddr_cke (ddr_cke),
.ddr_cs_n (ddr_cs_n),
.ddr_dm (ddr_dm),
.ddr_dq (ddr_dq),
.ddr_dqs_n (ddr_dqs_n),
.ddr_dqs_p (ddr_dqs_p),
.ddr_odt (ddr_odt),
.ddr_ras_n (ddr_ras_n),
.ddr_reset_n (ddr_reset_n),
.ddr_we_n (ddr_we_n),
.ddr_addr (ddr_addr),
.ddr_ba (ddr_ba),
.ddr_cas_n (ddr_cas_n),
.ddr_ck_n (ddr_ck_n),
.ddr_ck_p (ddr_ck_p),
.ddr_cke (ddr_cke),
.ddr_cs_n (ddr_cs_n),
.ddr_dm (ddr_dm),
.ddr_dq (ddr_dq),
.ddr_dqs_n (ddr_dqs_n),
.ddr_dqs_p (ddr_dqs_p),
.ddr_odt (ddr_odt),
.ddr_ras_n (ddr_ras_n),
.ddr_reset_n (ddr_reset_n),
.ddr_we_n (ddr_we_n),
// fixed io
.fixed_io_ddr_vrn (fixed_io_ddr_vrn),
.fixed_io_ddr_vrp (fixed_io_ddr_vrp),
.fixed_io_mio (fixed_io_mio),
.fixed_io_ps_clk (fixed_io_ps_clk),
.fixed_io_ps_porb (fixed_io_ps_porb),
.fixed_io_ps_srstb (fixed_io_ps_srstb),
.fixed_io_ddr_vrn (fixed_io_ddr_vrn),
.fixed_io_ddr_vrp (fixed_io_ddr_vrp),
.fixed_io_mio (fixed_io_mio),
.fixed_io_ps_clk (fixed_io_ps_clk),
.fixed_io_ps_porb (fixed_io_ps_porb),
.fixed_io_ps_srstb (fixed_io_ps_srstb),
// gpio ps
.gpio_i (gpio_i),
.gpio_o (gpio_o),
.gpio_t (gpio_t),
.gpio_i (gpio_i),
.gpio_o (gpio_o),
.gpio_t (gpio_t),
// intr pl to ps
.pl2ps_intr2 (intr_2ps),
.pl2ps_intr3 (flag_mgc_done_pulse),
.pl_tx_intr (intr_2ps | intr_2ps_vio_pos),
.pl_rx_intr (rx_data_src_fifo_tlast),
// tx fifo
.tx_data_src_count (tx_data_src_count),
.tx_data_src_tdata (tx_data_src_tdata),
.tx_data_src_tready (tx_data_src_tready),
.tx_data_src_tvalid (tx_data_src_tvalid),
//phy control signal
.phy_rst (phy_rst),
.phy_tx_test_flag (phy_tx_test_flag),
.phy_tx_iq_reverse (phy_tx_iq_reverse),
.phy_rx_iq_reverse (phy_rx_iq_reverse),
.tdma_flag_is_master(tdma_flag_is_master),
.tdma_slot_len (tdma_slot_len),
.tdma_tic_2_ps (tdma_tic_2_ps),
.tx_data_src_count (tx_data_src_count),
.tx_data_src_tdata (tx_data_src_tdata),
.tx_data_src_tready (tx_data_src_tready),
.tx_data_src_tvalid (tx_data_src_tvalid),
// rx fifo
.clk_rx_data_src_fifo (clk_2x),
.rst_rx_data_src_fifo (rx_rst),
.rx_data_src_fifo_tdata (rx_data_src_fifo_tdata),
.rx_data_src_fifo_tlast (rx_data_src_fifo_tlast),
.rx_data_src_fifo_tready(rx_data_src_fifo_tready),
.rx_data_src_fifo_tvalid(rx_data_src_fifo_tvalid),
// phy control signal
.phy_rst (phy_rst),
.phy_tx_test_flag (phy_tx_test_flag),
.phy_tx_iq_reverse (phy_tx_iq_reverse),
.phy_rx_iq_reverse (phy_rx_iq_reverse),
.tdma_flag_is_master (tdma_flag_is_master),
.tdma_slot_len (tdma_slot_len),
.tdma_tic_2_ps (tdma_tic_2_ps),
// uart
.uart_rx (uart_rx),
.uart_tx (uart_tx)
.uart_rx (uart_rx),
.uart_tx (uart_tx)
);
tdma u_tdma (
.clk (clk_1x),
.rst (rst_sys),
.flag_is_master (tdma_flag_is_master),
.flag_frame_sync(frame_sync_pulse),
.tdma_slot_len (tdma_slot_len[23:0]),
.tdma_tic_2_ps (tdma_tic_2_ps[23:0]),
.intr_2ps (intr_2ps),
.tx_start (tx_start),
.rx_rst (rx_rst)
);
// tdma u_tdma (
// .clk (clk_1x),
// .rst (rst_sys),
// .flag_is_master (tdma_flag_is_master),
// .flag_frame_sync(frame_sync_pulse),
// .tdma_slot_len (tdma_slot_len[23:0]),
// .tdma_tic_2_ps (tdma_tic_2_ps[23:0]),
// .intr_2ps (intr_2ps),
// .tx_start (tx_start),
// .rx_rst (rx_rst)
// );
@@ -292,7 +305,7 @@ module system_top (
.rst (rst_sys | phy_rst),
.speed_mode (2),
.send_data_ready (send_data_ready),
.send_start (tx_start),
.send_start (tx_start | tx_start_vio_pos),
.send_over (tx_done),
.clk_data_src (clk_data_src),
.tx_data_src_tdata (enc_fifo_dout_map),
@@ -306,24 +319,28 @@ module system_top (
);
RecvTop u_RecvTop (
.clk (clk_1x),
.clk_2x (clk_2x),
.clk_4x (clk_4x),
.rst (rst_sys | rx_rst | phy_rst),
.rst2 (rst_sys | phy_rst),
.dini (bb_rx_i),
.dinq (bb_rx_q),
.ad9361_ctrl_in (ad9361_ctrl_in),
.flag_mgc_done_pulse(flag_mgc_done_pulse),
.frame_sync_pulse (frame_sync_pulse),
.vio_tsync_inter16 (1),
.EQUenable_vio (1),
.Zerozone_vio (8'd29),
.vio_stopbit (7'd60),
.flag_stop (flag_stop),
.addr_stop (addr_stop),
.recvNetData (recvNetData),
.recvNetDataNd (recvNetDataNd)
.clk (clk_1x),
.clk_2x (clk_2x),
.clk_4x (clk_4x),
.rst (rst_sys | rx_rst | phy_rst | rx_rst_vio),
.rst2 (rst_sys | phy_rst),
.dini (bb_rx_i),
.dinq (bb_rx_q),
.ad9361_ctrl_in (ad9361_ctrl_in),
.flag_mgc_done_pulse (flag_mgc_done_pulse),
.frame_sync_pulse (frame_sync_pulse),
.vio_tsync_inter16 (1),
.EQUenable_vio (1),
.Zerozone_vio (8'd29),
.vio_stopbit (7'd60),
.flag_stop (flag_stop),
.addr_stop (addr_stop),
.recvNetData (recvNetData),
.recvNetDataNd (recvNetDataNd),
.rx_data_src_fifo_tdata (rx_data_src_fifo_tdata),
.rx_data_src_fifo_tlast (rx_data_src_fifo_tlast),
.rx_data_src_fifo_tready(rx_data_src_fifo_tready),
.rx_data_src_fifo_tvalid(rx_data_src_fifo_tvalid)
);
@@ -382,4 +399,11 @@ module system_top (
end
vio_system_top u_vio_system_top (
.clk (clk_1x),
.probe_out0(rx_rst_vio),
.probe_out1(tx_start_vio),
.probe_out2(intr_2ps_vio)
);
endmodule
hdl/tdma.v
+6
View File
@@ -79,6 +79,12 @@ module tdma #(
// ******** Debug ********
vio_tdma u_vio_tdma (
.clk (clk),
.probe_in0(tdma_slot_len),
.probe_in1(tdma_tic_2_ps),
.probe_in2(flag_is_master)
);
ila_mac_layer u_ila_mac_layer (
.clk (clk),
hdl/width_convert.v
+3 -3
View File
@@ -12,13 +12,13 @@
// * NOTE : this is the first version convert from wider bitwidth to narrower bitwidth
module width_convert #(
parameter INPUT_WIDTH = 16,
parameter OUTPUT_WIDTH = 2
parameter INPUT_WIDTH = 32,
parameter OUTPUT_WIDTH = 1
) (
input clk,
input rst,
input data_in_valid,
input wire data_in_ready,
output wire data_in_ready,
input wire [INPUT_WIDTH - 1 : 0] data_in,
output reg data_out_valid,
output reg [OUTPUT_WIDTH -1 : 0] data_out
sim/tb_extract_mac_frame.v
+82
View File
@@ -0,0 +1,82 @@
`timescale 1ns / 1ns
module tb_extract_mac_frame ();
reg clk = 0;
always #1 clk <= ~clk;
reg [ 3:0] cnt_startup = 0;
reg rst;
reg ldpc_in;
reg [31:0] cnt_in = 0;
reg [ 4:0] cnt_sleep = 0;
reg sleep = 0;
reg cnt_in_valid = 0;
wire m_axis_mac_frame_tvalid;
wire [31:0] m_axis_mac_frame_tdata;
wire m_axis_mac_frame_tlast;
always @(posedge clk) begin
if (m_axis_mac_frame_tlast == 1) begin
cnt_startup <= 0;
end
else if (cnt_startup < 4'hF) begin
cnt_startup <= cnt_startup + 1;
end
rst <= cnt_startup <= 4'hC;
end
always @(posedge clk) begin
if (rst) begin
cnt_in <= 0;
end
ldpc_in <= $random();
if (cnt_startup == 4'hF) begin
if (sleep) begin
cnt_in <= 0;
cnt_in_valid <= 0;
cnt_sleep <= cnt_sleep + 1;
if (cnt_sleep == 5'b11111) begin
sleep <= 0;
end
end
else begin
cnt_sleep <= 0;
if (cnt_in < 1024) begin
cnt_in <= cnt_in + 1;
end
if (cnt_in == 1023) begin
sleep <= 1;
end
cnt_in_valid <= 1;
end
end
end
extract_mac_frame u_extract_mac_frame (
.clk (clk),
.rst (rst),
.ldpc_dec_out_start (cnt_startup == 4'hD),
.ldpc_dec_out_valid (cnt_in_valid),
.ldpc_dec_out_data (ldpc_in),
.m_axis_mac_frame_tvalid(m_axis_mac_frame_tvalid),
.m_axis_mac_frame_tdata (m_axis_mac_frame_tdata),
.m_axis_mac_frame_tready(1),
.m_axis_mac_frame_tlast (m_axis_mac_frame_tlast)
);
endmodule
sim/tb_scrambler.v
+53
View File
@@ -0,0 +1,53 @@
`timescale 1ns / 1ns
module tb_scrambler ();
reg clk = 0;
always #1 clk <= ~clk;
reg [3:0] cnt_startup = 0;
reg rst;
always @(posedge clk) begin
if (cnt_startup < 4'hF) begin
cnt_startup <= cnt_startup + 1;
end
rst <= cnt_startup <= 4'hC;
end
reg [31:0] s_axis_tdata;
reg s_axis_tvalid;
wire s_axis_tready;
reg s_axis_tlast;
wire [31:0] m_axis_tdata;
wire m_axis_tvalid;
// wire m_axis_tvalid;
wire m_axis_tlast;
reg [31:0] cnt = 0;
always @(posedge clk) begin
s_axis_tvalid <= (cnt_startup == 4'hF && cnt < 32);
if (rst) begin
s_axis_tdata <= 0;
end
else if (s_axis_tready && cnt < 32) begin
s_axis_tdata <= cnt;
cnt <= cnt + 1;
end
end
scrambler u_scrambler (
.clk (clk),
.rst (rst),
.s_axis_tdata (s_axis_tdata),
.s_axis_tvalid(s_axis_tvalid),
.s_axis_tready(s_axis_tready),
.s_axis_tlast (s_axis_tlast),
.m_axis_tdata (m_axis_tdata),
.m_axis_tvalid(m_axis_tvalid),
.m_axis_tready(1),
.m_axis_tlast (m_axis_tlast)
);
endmodule